Import Export Data, Export Import shipment data from Customs

Date:

01-03-2002

Notification No:

CUSTOMS Notification No 21/2002

Issuing Authority:

Indian Customs

Type:

Tariff

File No:

Subject:

General exemptions relating import of specified goods

General exemptions relating import of specified goods

General Exemptions Relating Import of Specified Goods

Custom Notification No. 21 dated the 1^st March 2002 (As amended by Corrigendum dated 1^st March 2002, Corrigendum dated 13^th March 2002, Corrigendum dated 27^th March 2002, Notification No. 36 dated 3^rd April 2002, Notification No. 37 dated 11^th April 2002, Notification No. 48 dated 22^nd April 2002, Corrigendum dated 26^th April 2002, Corrigendum dated 10^th May 2002, Notification No. 52 dated 13^th May 2002, Notification No. 54 dated 22^nd May 2002, Notification No. 63 dated 18^th June 2002, Notification No. 67 dated 3^rd July 2002, Notification No. 70 dated 11^th July 2002, Notification No. 72 dated 23^rd July 2002, Notification No. 83 dated 14^th August 2002, Notification No. 84 dated 19^th August 2002, Notification No. 93 dated 6^th September 2002, Notification No. 114 dated 16^th October 2002, Notification No. 115 dated 17^th October 2002, Notification No. 130 dated 20^th November 2002, Notification No. 131 dated 28^th November 2002, Notification No. 136 dated 9^th December 2002, Notification No. 140 dated 23^rd December 2002, Notification No. 144 dated 31^st December 2002, Notification No. 4 dated 3^rd January 2003, Notification No. 26 dated 1^st March 2003)

In exercise of the powers conferred by sub-section (1) of section 25 of the Customs Act, 1962 (52 of 1962) and in supercession of the notification of the Government of India in the Ministry of Finance (Department of Revenue), No.17/2001-Customs, dated the 1^st March, 2001[G.S.R. 116(E) dated the 1^st March, 2001], the Central Government, being satisfied that it is necessary in the public interest so to do, hereby exempts the goods of the description specified in column (3) of the Table below or column (3) of the said Table read with the relevant List appended hereto, as the case may be, and falling within the Chapter, heading or sub-heading of the First Schedule to the Customs Tariff Act, 1975 (51 of 1975) as are specified in the corresponding entry in column (2) of the said Table, when imported into India,-

(i) from so much of the duty of customs leviable thereon under the said First Schedule as is in excess of the amount calculated at the rate specified in the corresponding entry in column (4) of the said Table;

(ii) from so much of the additional duty leviable thereon under sub-section (1) of section 3 of the said Customs Tariff Act, as is in excess of the rate specified in the corresponding entry in column (5) of the said Table, subject to any of the conditions, specified in the Annexure to this notification, the condition No. of which is mentioned in the corresponding entry in column (6) of the said Table:

Provided that nothing contained in this notification shall apply to �

(i) the goods specified against serial Nos. 239, 240, 241 and 242 of the said Table on or after the 1^st day of April 2004;

(ii) the goods specified against serial Nos. 250, 251, 252 and 415 of the said Table on or after the 1^st day of March 2005.

Explanation: For the purposes of this notification, the rate specified in column (4) or column (5) is ad valorem rate,

Table

S. *No.*	*Chapter or* *Heading* *or sub �* *heading*	Description of goods	*Standard rate*	*Additional duty rate*	*Condition No.*
*(1)*	*(2)*	*(3)*	*(4)*	*(5)*	*(6)*
1.	1	Cows, heifers, bulls, goats, sheep, pigs, angora rabbits, ducklings and pure line poultry stock	5%	-	-
2.	1	Grand parent poultry stock and Donkey stallions	25%	-	-
3.	0402 10 or 0402 21 00	Goods upto an aggregate of ten thousand metric tonnes of total imports of such goods in a financial year.	15%	-	1
4.	0406 90 00	All goods	30%	-	-
5.	5	Pancreas	5%	-	-
6.	0511 91	Artemia cyst, including wet artemia cyst	5%	-	-
7.	5 or any other Chapter	The following goods, namely: - (y) Frozen semen; (2) Frozen semen equipment, namely: - (y) Flasks, refrigerators, vessels, jars or dewars, and their accessories; (b) Plastic insemination sheath and insemination guns; and � Wheaton Ampoules and straws for freezing semen	5%	Nil	-
8.	6, 7, 8, 9 �or 12	Planting materials, namely, oil seeds, seeds of vegetables, flowers and ornamental plants, tubers and bulbs of flowers, cuttings or saplings of flower plants, seeds or plants of fruits and seeds of pulses	5%	Nil	2
9.	06.01 or 06.02	All goods	5%	-	-
10.	0703 10 10	Onions	5%	-	-
11.	07.13	Pulses	10%	-	-
12.	8	Cashew nuts in shell	Nil	Nil	-
13.	8, 12, 13, 15, 16, 17, 18, 19, 20 or 21	All goods (excluding alcoholic preparations falling under sub-heading 2106.90)	25%	-	3
14.	0802 12 00	All goods	Rs. 65/- �per kg.	-	-
15.	0802 90	All goods other than Areca nuts	30%	-	-
16.	0805 10 00, 0805 50 00, 0806 10 00 or 0808 20 00	All goods	30%	-	-
17.	0810 60 00 or 0810 90 00	All goods	15%	-	-
18.	10.01	All goods other than Meslin	50%	-	-
19.	10.01	Meslin	Nil	-	-
20.	1005 10 00, 1007 or 1008 20	All goods	50%	-	-
21.	1005 90 00	Goods upto an aggregate of- (y) four lakh metric tonnes of total imports of such goods in the financial year 2001-2002 b) four lakh and fifty thousand metric tonnes of total imports of such goods in the financial year 2002-2003	15%	-	1
22	1005 90 00	All goods other than those specified against �S. No. 21 above	50%	-	-
23	1107 10 00	All goods	30%	-	-
24.	12.09	All goods (other than those falling under sub-headings 1209.91 and 1209.99)	15%	-	-
25.	1209.91 or 1209.99	All goods	5%	-	-
26.	1211 30 00 1211 40 00 or 1211 90	All goods	15%	-	-
27.	1301 90 49	Oleopine resin	10%	-	-
28.	1302 19 or 1302 20 00	All goods	15%	-	-
29.	15	Edible oils falling under headings 15.08, 15.11, 15.12, 15.13, 15.14 or 15.15	85%	-	-
30.	15	All goods, having a Free Fatty Acid (FFA) content of 20 per cent. Or more and falling under headings 15.07, 15.08, 15.09, 15.10, 15.11, 15.12, 15.13, 15.14 or 15.15	30%	-	-
31.	15	Refined vegetable oils of edible grade, in loose or bulk form	85%	-	-
32.	15	�Vegetable oils of edible grade, in loose or bulk form other than those specified against S. No.31 above, imported for the manufacture of oil commonly known as �Vanaspati� or for refining *Explanation:* The expression �Vegetable oil� means- (y) in the case of cottonseed oil, oil having a free fatty acid content of at least 0.2%; and (b) in the case of any other vegetable oil, oil with free fatty acid content of at least 0.5%.	75%	-	4 and 5
33.	15.05	All goods	15%	-	-
34.	15.11	Crude palm oil and its fractions, of edible grade, in loose or bulk form	65%	-	-
�35.	1512.11	Crude sunflower seed or safflower oil upto an aggregate of one lakh and fifty thousand metric tonnes of total imports of such goods in a financial year	50%	-	1
�36.	1512.11	All goods other than those specified against S.No. 35 above	75%	-	-
�37.	1514.19 or 1514.99	Refined rape, colza or mustard oil upto an aggregate of one lakh and fifty thousand metric tonnes of total imports of such goods in a financial year	45%	-	1
38.	17.01	All goods	60%	-	-
39.	1702.11 or 1702.19	All goods	25%	-	-
40.	17.03	All goods	15%	-	-
41.	1704 10 00	All goods	30%	-	-
42.	1806.90	Food preparations, meant for infant use and put up for retail sale, of � (y) flour, meal, starch or malt extract containing cocoa in a proportion by weight 40% or more but less than 50%, calculated on a totally de-fatted basis; or (ii) goods of headings 04.01 to 04.04 containing cocoa in a proportion by weight 5% or more but less than 10%, calculated on a totally de-fatted basis	15%	-	-
43.	1901.10	Preparations for infant use, put up for retail sale	30%	-	-
44.	1905 31 00 or 1905 32	All goods	30%	-	-
45	2004 10 00	All goods	30%	-	-
46.	2009 11 00, 2009 12 00 or 2009 19 00	Orange juice	30 %	-	-
47.	2106.90	All goods (excluding compound alcoholic preparations of a kind used for the manufacture of beverages, of an alcoholic strength by volume exceeding 0.5 per cent. By volume, determined at a temperature of 20 degrees centigrade)	30%	-	-
48.	22	Wine, for use as sacramental wine	30%	Nil	6
49.	2207.10	All goods	-	Nil	-
50.	2207 20 00	All goods	15%	-	-
51.	22.08	Angostura bitters	5%	Nil	-
52.	23, 28, 29, 30 or 38	Veterinary drugs and other goods specified in List 1	10%	-	-
53.	2301.20	All goods	5%	-	-
54.	2302.20, 3.04, 23.05 or 23.06	All goods	15%	-	-
55.	23.04	Dietary Soya Fibre	15%	-	-
56.	2309.90	Prawn feed, Shrimp Larvae feed and fish feed in pellet form *Explanation:* For the removal of doubt, �prawn feed� shall mean goods- (y) which are capable of being used as prawn feed, as such, without any addition or alteration thereto; and (ii) in which the proportion of vitamin pre- mixes or vitamins, by weight, shall not exceed the standard input output norms (SION) for prawn feed as contained in the Public Notice No. 19 (RE-88) /1997-2002, dated the 24^th June, 1998 (as amended from time to time) of the Government of India, in the Ministry of Commerce and Industry.	5%	-	-
57.	25	Spodumene ore, Strontium ore or Natural Boron ore	15%	-	-
58.	25	The following goods, when imported for use in the manufacture of refractory products falling under Chapters 38, 68 or 69, namely: - (1) Andalusite falling under tariff item 2508 50 10; (2) (2) Fused mulite falling under tariff item 2508 60 00; (3) Dead burnt magnesite (DBM) falling under heading 2519, having - (a) magnesium oxide content not less than 92% by weight, (b) silica content less than 4% by weight, and (c) bulk density not less than 3.20 gm/cc; (4) Fused magnesia falling under sub-heading 2519 90; and (5) Sea water magnesia falling under heading 2519	15%	-	5
59.		Omitted
60.	2503 00	Crude or unrefined sulphur	5%	-	-
61.	2521 00	Low silica limestone (i.e. less than 0.6% silica content) for use in the manufacture of goods falling under Chapter 72	15%	-	5
62.	2523 10 00	Cement clinkers	20%	-	-
63.	2523.29	�Ordinary Portland Cement	20%	-	-
64.	26	Gold concentrate imported by a gold refinery for refining into gold.	-	Nil	-
65.	2620 19 00	All goods (excluding zinc dross)	15%	-	-
66.	2620.30	All goods (excluding copper mill scale)	15%	-	-
67.	27	N-Paraffin imported for use in the manufacture of Linear Alkyl Benzene	20%	-	5
68.	27.01	Coking coal of ash content below 12%	5%	-	-
69.	27.01	Coking coal of ash content of 12% or more	15%	-	-
70.	2701 12 00	All goods other than coking coal	25%	-	-
71.	2704 00	Metallurgical coke	10%	-	-
72.	2707 99 00	Carbon black feedstock	20%	-	-
73.	2710 19	Kerosene imported by the Indian Oil Corporation Limited for ultimate sale through the Public Distribution System *Explanation:* �Kerosene� means any hydrocarbon oil (excluding mineral colza oil and white spirit) which has a smoke point of 18 mm or more (determined in the apparatus known as the smoke point lamp in the manner indicated in the Bureau of Indian Standards specifications ISI: 1448 (P-31) �1968 and is ordinarily used as an illuminant in oil burning lamps.	10%	-	-
74.	27.10	Naphtha	10%	-	-
75.	27.10	Naphtha when imported by the power plants specified in List 2	� 10%	� Nil	7
76.	27.10 or 2714.90	All goods, for the manufacture of fertilisers	Nil	Nil	5
77.	2711 11 00	Liquefied natural gas	5%	�Nil	-
78.	2714.90	All goods, for the purpose of power generation	-	Nil	-
79	28 or 29	Chemicals, for use in the manufacture of Centchroman	Nil	-	-
80.	28, 29 or 30	The following goods, namely: - (A) Drugs or medicines specified in List 3	5%	-	-
80.	28, 29 or 30	(B) Bulk drugs used in the manufacture of the drugs or medicines at (A) above	5%	Nil	5
81.	28, 29 or 30	Formulations or bulk drugs, namely, Nilutamide, Sodium fusidate, Doxorubicin HCl, Cyclosporine, Azathioprine, Enoxaparin, Low molecular weight heparin or Erythropoietin. **Explanation. �** The expressions �bulk drug� and �formulation� shall have the meanings respectively assigned to them in the Drugs (Prices Control) Order, 1995, issued under section 3 of the Essential Commodities Act, 1955 (10 of 1955)	15%	-	-
82.		Omitted
83.	28, 29, 30 or 38	The following goods, namely: - (A) Life saving drugs/ medicines including their salts and esters and diagnostic test kits specified in List 4 (B) Bulk drugs used in the manufacture of life saving drugs or medicines at (A) above (C) Other life saving drugs or medicines	Nil Nil Nil	- Nil Nil	- 5 8
84.	28, 29, 32, 39, 54, 70 or 90	The following goods, namely: - (y) Goods specified in List 5, for the manufacture of telecommunication grade optical fibres or optical fibre cables; (B) Fibre reinforced plastic rods (FRP), for the manufacture of telecommunication grade optical fibres or optical fibre cables; � Goods specified in List 6 for manufacture of telecommunication grade FRP	5% �5% Nil	- - -	5 5 5
85.	28, 29, 84, 85 �or 90	The goods specified in List 7, for the manufacture of laser and laser based instrumentation	Nil	Nil	9
86.	28 or 38	The following goods, namely: - (y) Silicon in all forms, that is, polycrystalline silicon or ingots, for the manufacture of ndiffused silicon wafers; (B) Undiffused silicon wafers, for the manufacture of solar cells or solar cell modules;	� Nil �	- �	5
87.	28	The following goods, namely: - (y) Radium and its salts; (ii) Radioactive isotopes of iodine, phosphorus, cobalt, caesium and all chemical compounds containing such radioactive isotopes; (iii) Molybdenum 99 and technetium 99 m isotopes; (iv) Enriched uranium or uranium oxide	15%	-	-
88.	28	Phosphoric acid, for the manufacture of fertilisers	5%	Nil	-
89.	28	Anhydrous ammonia, for the manufacture of goods falling under Chapter 31, for use as fertilisers	-	Nil	-
90.	28	Zirconium oxide or Yttrium oxide, for the manufacture of raw cubic zirconia	15%	Nil	-
91.	2801 20 00	Iodine for manufacture of Potassium Iodate	-	Nil	5
92.	2836.20	Disodium Carbonate (Soda ash)	20%	-	-
93.	29 or any Chapter	Raw materials, intermediates and consumables supplied by the UNICEF for the manufacture of DTP vaccines	Nil	Nil	10
94.	29, 30, 34, 37, 38, 39, 69, 84, 85, 87, 90 or 94	(y) Medical equipment (excluding foley balloon catheter) and other goods, specified in List 8; (B) Parts for the manufacture, and spare parts for the maintenance, of the goods at (A) above sadlink	15% 15%	- -	- 11
95.	29, 30, 35, 38 or 39	The following goods, for the manufacture of Enzyme Linked Immunoabsorbent Assay Kits (ELISA Kits), namely: - (y) Plastic ELISA plates; (ii) Deactivated positive control sera against human and animal diseases; (iii) Enzyme horse raddish peroxidase; (iv) Enzyme Alkaline phosphatase; (v) Enzyme glucose oxidase; (vi) Animal anti-human immunoglobins; (vii) Protein A or Protein A Gold Conjugates; (viii) Polystyrene latex beads; (ix) Deactivated enzyme labelled human anti- HIV reagent	5%	-	5
96.	29 or 38	Gibberellic acid	5%	Nil	-
97.	29	Monoethylene Glycol (MEG), Purified Terephthalic Acid (PTA), Dimethyl Terepthalate (DMT), Caprolactum	20%	-	-
98.	29	DL-2 Aminobutanol, Diethyl Malonate, Triethyl Orthoformate, Aceto Butyrolactone, Thymidine, Artemisinin	� 5%	-	-
99.		Omitted
100.		Omitted
101.		Omitted
101A.		Omitted
102.		Omitted
103.		Omitted
104.	30	Medicaments containing spirit	-	Nil	-
105.	30	Japanese Encephalitis (JE) vaccine, imported by the Andhra Pradesh Government through UNICEF	Nil	-	-
106.	31	Kyanite salts, in a form indicative of their use for manurial purpose	5%	-	-
107.	31	Muriate of potash, for use as manure or for the production of complex fertilisers	5%	-	-
108.	31	Ammonium phosphate or ammonium nitro-phosphate, for use as manure or for the production of complex fertilisers	5%	-	-
109.	31	Composite fertilisers	5%	-	-
110.	31	Potassium Nitrate, in a form indicative of its use for manurial purpose	5%	-	-
111.	3102 10 00	Urea, for use as manure	5%	-	-
112.	3104 30 00	Potassium sulphate, containing not more than 52% by weight of potassium oxide	5%	-	-
113.	3105 30 00	Diammonium phosphate, for use as manure or for the production of complex fertilisers	5%	-	-
114.	32, 34, 38, 83 or any other Chapter	(a) Electric parts for fitting on electric lamp / table lamp/ wall lamp/ ceiling lamp/ door lamp/ window lamp/ garden lamp; (b) Hinges, metal locks and back of photo frames, and fittings for photo frame/ box; (c) Wax items for candle holder/ votive/ cup; (d) Chemicals/ lacquer required for improved finish of export product; (e) Motifs for attachment on export product; (f) Severe atmospheric corrosion inhibitor (SACI) used as rust preventive concentrate for coating on ornamental painted and unpainted Cast Iron Artware; (g) Heat resistant paint used on cast iron items for ornamental fire place accessories; (h) Wood polish materials; and (i) Poly films used for shrink wrapping and cling � wrapping of artwares (j) Wooden biscuit (splings-joining accessory for wooden board); (k) Decorative paper for lamp shade; (l) Sea shell, Mother of Pearl (MOP), Cattle horn and Bone Materials; (m) Prints for photo frames (n) Animal hair materials for brushes; (o) Copper adhesive tape �� or less; (p) Adhesive Copper foil1/8� to 1 �; (q) Patina and patina bronze; (r) Analog clock movement; (s) Hardware brass and metal fittings for furniture; (t) Handles/ blades for cutlery; (u) Glass sheet (Clear or opaque or coloured glass) for use with mosaic)	Nil	Nil	12
115.	32, 39, 40, 41, 44, 45, 54, 56, 68, 70 or 95	The following goods for use in the manufacture of sports goods, namely: - (y) Printing inks �(2) Nylon gut �(3) PU Grip (sheets for hockey sticks) �(4) Butyl bladders for inflatable balls �(5) PU leather for inflatable balls �(6) Willow clefts, ash wood or beech wood �(7) Cork bottoms �(8) Carbon fibres �(9) Glass fibre	15%	-	-
116.	32, 39 or 71	The following goods, namely: - (y) Silver powder suspension of Chapter 32 or 71; (ii) Silicone resin and silicone rubber of Chapter 39	5%	Nil	5 and 13
117.	32, 84 or 96	Ink Cartridges, Ribbon Assembly, Ribbon Gear Assembly, Ribbon Gear Carriage, for use in printers for computers	5%	-	-
118.		Omitted
119.	3302.10	All goods (excluding compound alcoholic preparations of a kind used for the manufacture of beverages, of an alcoholic strength by volume exceeding 0.5 per cent. Volume, determined at 20 degrees centigrade)	25%	-	-
120.	35, 39, 72 or 73	The following goods for the manufacture of syringes and needles falling under heading 90.18, namely: - (y) Adhesive epoxy grade falling under sub-heading 3506.99; (2) Low density polyethylene falling under sub-heading. 3901.10; (3) Polypropylene falling under sub-heading 3902.10; (4) Stainless steel strip falling under sub-heading 7220.90; (5) Stainless steel capillary tube falling under sub-headings 7304.90, 7306.40 or 7306.90	15%	-	5
121.	35	Hydroxyethyl starch, for use in the manufacture of Plasma Volume Expanders	5%	-	5
122.	35	Isolated soya protein	15%	Nil	-
123.	37 or 85	Films and video cassettes	15%	Nil	14
124.	37	Film strips and film slides for educational purposes	15%	Nil	-
125.	37	Film of a predominantly educational character	15%	Nil	15
126.	37	Microfilms, of printed books (including covers for printed books), periodicals (including newspapers), music manuscripts, maps, charts, plans, drawings and designs	15%	Nil	-
127.	37	Exposed and developed film sheets for printing or reproduction of printed books (including covers for printed books), periodicals (including newspapers), music manuscripts, maps, charts, plans, drawings and designs	15%	Nil	-
128.	37	Exposed cinematographic films	15%	Nil	16
129.	37	Colour positive unexposed cinematographic film in jumbo rolls and colour negative unexposed cinematographic film in rolls of 400 feet and 1000 feet	5%	Nil	-
130.	3701.20 or 3702.20	Instant print film	5%	-	-
131.		Omitted
132.	37.04 or 85.24	(i) Cinematographic films, exposed but not developed; (ii) Recorded magnetic films used for producing TV serials	Nil Nil	Nil Nil	- -
133.		Omitted
134.	38	Lumulus Amebocyte Lysate (LAL) Test Kit	15%	-	-
135.	38	Dipping Oil, Paclobutrazol (Cultar)	15%	-	-
136.	38	Bio-pesticides, based on � (i) Bacillus thuringiensis var. kurstaki (ii) Bacillus thuringiensis var. israelensis (iii) Bacillus sphaericus (iv) Saccharopolyspora spinosa	5%	-	-
137.		Omitted
138.	38.22	Pharmaceutical Reference Standard	5%	Nil	17
139.	3823.70	All goods	25%	-	-
140.	39, 48 or any other Chapter	Tags, labels, printed bags, stickers, belts, buttons or hangers, imported by bona fide exporters	Nil	Nil	-
141.	39 or 74	(i) Alatheon of Chapter 39 (ii) Copper wire of Chapter 74	Nil	Nil	5 and 18
142.	39	Dextran, imported for use in the manufacture of Plasma Volume Expanders	5%	-	5
143.	39	Saddle tree	5%	-	-
144.		Omitted
145.		Omitted
146.		Omitted
147.	39.20	Subbed polyester base, for the manufacture of medical or industrial X-ray films and graphic art films	Nil	-	-
148.	4012 13 00	Retreaded tyres, of a kind used on aircrafts	3%	-	-
149.	41	Wet blue chrome tanned leather, crust leather, finished leather of all kinds, including splits and sides of the aforesaid	Nil	-	-
150.	43.01 or 43.02	All goods (other than those falling under sub-headings 4301.30 and 4302.13)	Nil	-	-
151.	47	Pulp of wood or of other fibrous cellulosic material (excluding rayon grade wood pulp)	Nil	-	5 and 19
152.	47.07	All goods imported for use in, or supply to, a unit for manufacture of paper or paperboard	5%	Nil	20
153.	48	Grape guard, namely, paper of a type generally used for the packing of grapes and which consists of two sheets of treated white paper pressed together with thin rectangular pouches containing sodium meta-bi-sulphite, with kraft paper pasted thereto or a single paper coated with sodium meta-bi-sulphite, and which is used for the purpose of preventing fungal decay and thus helps prolonged storage in fresh condition, imported for use in the packing of grapes	5%	Nil	-
154.	48.01	Newsprint	5%	Nil	-
155.	48.02	Mould vat made watermarked bank note paper, imported by the Bank Note Press, Dewas, the Currency Note Press, Nasik, the India Security Press, Nasik, the Security Printing Press, Hyderabad, the Bhartiya Reserve Bank Note Mudran Limited, Mysore, or the Bhartiya Reserve Bank Note Mudran Limited, Salbony	Nil	Nil	-
156.	48.10	Light weight coated paper weighing upto 70 g/m^2, imported by actual users for printing of magazines	5%	Nil	-
157.	49 or 85.24	The following goods, namely: - (y) Information Technology software, and (ii) Document of title conveying the right to use Information Technology software. *Explanation. �* �Information Technology software� means any representation of instructions, data, sound or image, including source code and object code, recorded in a machine readable form, and capable of being manipulated or providing interactivity to a user, by means of an automatic data processing machine.	Nil	-	- �
158.	49	Commonwealth and International Reply Coupons and UNESCO Coupons	Nil	Nil	-
159.	49	Greeting cards, diaries and calendars, and corresponding number of envelopes for such greeting cards, diaries and calendars, imported by UNICEF	Nil	-	-
160.	49	Printed books (including covers for printed books) and printed manuals, in bound form or in loose-leaf form with binder, executed on paper or any other material including transparencies	Nil	-	-
161.	49	Cheque forms (including blank travellers cheques)	15%	-	-
162.	49.06	All goods	Nil	-	-
163.	49.07	Printed Indian Bank Notes, imported by the Reserve Bank of India	Nil	Nil	-
164.	49.11	Plans, drawings and designs	Nil	-	-
165.	51.01	Raw wool, imported by a registered Apex Handloom Cooperative Society, a State Handloom Development Corporation, the Khadi and Village Industries Commission, a State Khadi and Village Industries Board or a registered Apex State Level Khadi Federation	5%	-	-
166.	51.01	The following goods, namely: - (A) Raw wool of average fibre diameter 32 microns and above; (B) Shorn wool falling under sub-heading 5101.21; (C) Carbonised wool falling under sub-heading 5101.30	5% 5% 15%	- - -	- - -
167.	�52 or any Chapter	(y) Fasteners �(b) Inlay cards �� Shoulder pads; �(d) Buckles; (e) Eyelets (f) Hooks and eyes (g) Rivets (h) Collar stays, collar patties, butterfly and other garment stays including plastic stay (i) Fusible embroidery motifs or prints (j) Laces (k) Badges including embroidered badges (l) Embroidery threads (m) Sewing thread (n) Stones (other than precious and semi precious) (o) Sequin (p) Tape, Elastic tape and hook tape of width not exceeding 75 mm (q) Velcro tape � Cord and cord Stopper (s) Toggles (t) Polywadding materials (u) Stud; (v) Elastic cloth and Elastic band; (w) Quilted wadding materials; (x) Beads for embroidery (y) Sample fabric of total length upto 500 metre imported during one financial year	Nil	Nil	21
167A.	Any Chapter	(a) Buckles, �D� rings, eyelets, hooks and eyes, rivets and studs; (b) Buttons and fasteners of all types; (c) Velcro Hook, Velcro tapes and Loop tape; (d) Elastic Tape, adhesive tape and reinforcement tape; (e) Stamping foil; (f) Sewing thread; (g) Locks including magnetic locks; (h) Metal Handles, handle fitting, dog hooks, Logos all types, Ring binders, Key hooks, Key rings, Key holders, Push Clip, Chains, Pullers, hinges and magnetic snaps; (i) Glow liners; (j) Loop rivets and loop ova; (k) Polishes, creams and shoes finishes in any form	Nil	Nil	21A
168.	43, 52, 54, 55, 56, 58 or 59	Lining and inter-lining materials	Nil	Nil	21
169.	53.01	Flax fibre	15%	-	-
170.	5303.10	Raw jute	5%	-	-
171.		Omitted
172.	6001.10 or 6001.92	Pile fabrics for the manufacture of toys	15%	-	5
173.		Omitted
173A.	6307.90	Umbrella cloth panels for use in the manufacture of umbrellas	15%	-	5
174.	64 or any other Chapter	The following goods for use in the leather industry, namely: - (1) Parts, consumables and other items specified in List 9 (A) (2) Other parts, consumables and items specified in List 9 (B)	25% 25%	- -	- 22
174A.	-	Omitted	-	-	-
175.	68, 82 or 84	Moulds (including chassis for the manufacture of semi-conductor devices), tools (excluding tungsten carbide micro PCB drills) and dies, for the manufacture of electronic parts	15%	-	23 �
176.	70 or 90	Preform of Silica for the manufacture of telecommunication grade optical fibres or optical fibre cables.	5%	-	5
177.		Omitted
178.	70.15	Rough ophthalmic blanks, for manufacture of optical lenses	5%	-	-
179.		Omitted
180.	71	The following goods, namely: - (i) Raw pearls, other than cultured pearls; (ii) Rubies, emeralds and sapphires, unset and imported uncut; (iii) Omitted	5%	Nil	-
180A.	71	Rough diamonds (industrial or non-industrial)	Nil	Nil	-
181.	71	Current coins of the Government of India	Nil	Nil	-
182.	71	Raw cultured pearls (including admixtures of pearls containing raw real pearls and cultured pearls)	5%	-	-
183.	71	Rough semi-precious stones	Nil	-	-
184.	71	Cut and polished coloured gemstones	5%	-	-
185.	71	Ash and residues containing precious metal or precious metal compounds, of a kind used principally for the recovery of precious metal	15%	-	-
186.	71	Foreign currency coins when imported into India by a Scheduled Bank	Nil	Nil	24
187.	71.02	Non-industrial diamonds (other than rough diamonds)	5%	-	-
188.	71.04	Rough synthetic stones	15%	-	-
189.	7110 11 or 7110 19 00	Platinum	Rs. 550/- per 10 grams	-	-
190.	72 or any other Chapter	The horological raw materials specified in List 10	15%	-	5 and 25
191.	72 or any Chapter	Coin blanks imported by a Mint of the Government of India	Nil	Nil	26
192.		Omitted
193.		Omitted
194.		Omitted
195.		Omitted
196.	72	Hot rolled stainless steel coils for use in the manufacture of coin blanks to be supplied to a Mint of the Government of India	Nil	Nil	5
197.	72.01	Pig iron	15%	-	-
198.	7202 60 00	Ferro-nickel	5%	-	-
199.		Omitted
200.	72.04	Melting scrap of iron or steel (other than stainless steel or heat resisting steel), for use in, or supply to, a unit for the purpose of melting	5%	-	20
201.		Omitted
202.	7204.21	Scrap of stainless steel, for the purpose of melting	5%	-	-
203.		Omitted
204.		Omitted
205.		Omitted
206.		Omitted
207.	72	All goods, other than the following: - (i) goods falling under headings 7201 or 7202; (ii) goods mentioned against S. Nos. 196, 197, 198, 200 or 202 above; and (iii) seconds and defectives of goods falling under Chapter 72	30%	-	-
208.		Omitted
209.		Omitted
210.		Omitted
211.		Omitted
212.		Omitted
212A.	82	Dies for drawing metal, when imported after repairs from abroad, in exchange of similar worn-out dies exported out of India for repairs	25%	-	28A
212B.	79	Zinc Metal recovered by Toll Smelting or Toll Processing from Zinc Concentrates exported from India for such processes	25%	-	28B
213.		Omitted
214.	84, or any other Chapter	Goods specified in List 12 required in connection with petroleum operations undertaken under petroleum exploration licenses or mining leases, as the case may be, issued or renewed after the 1^st of April, 1999 and granted by the Government of India or any State Government to the Oil and Natural Gas Corporation or Oil India Limited on nomination basis	Nil	Nil	29
215.	84 or any other Chapter	Parts and raw materials for manufacture of goods to be supplied in connection with the purposes of off-shore oil exploration or exploitation	Nil	Nil	30
216	84 or any other Chapter	Goods specified in List 12 required in connection with petroleum operations undertaken under specified contracts	Nil	Nil	31
217.	84 or any other Chapter	Goods specified in List 12 required in connection with petroleum operations undertaken under specified contracts under the New Exploration Licensing Policy	Nil	Nil	32
218.	84 or any other Chapter	Goods specified in List 13 required in connection with coal bed methane operations undertaken under specified contracts under the Coal Bed Methane Policy	Nil	Nil	32
219.	84 or any Chapter	�Goods specified in List 14	5%	-	33
220.	84 or any other Chapter	The following goods, namely: - (1) Plant, machinery, equipment, special tools, tackles, spares (including insurance spares), consumables and security surveillance systems imported by or on behalf of the Reserve Bank of India or Bhartiya Reserve Bank Note Mudran Private Limited for the setting up of New Note Press projects at Salbony in West Bengal and at Mysore in Karnataka; (2) Plant, machinery, equipment, spares (including insurance spares) and consumables imported by or on behalf of the Reserve Bank of India or the Bhartiya Reserve Bank Note Mudran Private Limited for expansion and modernisation of the Currency Note Press at Nasik in Maharashtra and the Bank Note Press at Dewas in Madhya Pradesh	5%	Nil	-
221.	84 or any other Chapter	Fire fighting equipment, namely: - (i) Turnable ladders & hydraulic platforms of height of 30 meters and above (ii) Portable pumps of 45 HP/3500 RPM and above, discharging 1500 LPM water and above (iii) Pneumatic lifting bags (iv) Explosive gas detection equipment with tubes (v) Rescue tools and gears (vi) Compressed air breathing system (vii) Spare parts for maintenance of goods specified at (i) and (ii) above	20%	-	-
222.	84 or any other Chapter	Goods specified in List 15, required for setting up of a Training and Development Project by the Jewellery Product Development Centre, Mumbai or the Indian Gemological Institute, Delhi, or the Indian Diamond Institute, Surat	15%	-	34
223.	84 or any other Chapter	The following goods, namely: - (a) Vacuum tube solar collectors, concentrating solar collectors, plastic collectors or stirling engines, for manufacture of solar energy equipment; (b) Linear actuators for tracking systems, Fresnel lenses or sun sensors, for manufacture of concentrating solar collectors	15%	Nil	-
224.	84 or any Chapter	�The following goods, namely: - (1) Wind operated electricity generators upto 30 KW and wind operated battery chargers upto 30 KW (2) Parts of wind operated electricity generators, for the manufacture or the maintenance of wind operated electricity generators, namely: - (a) Special bearings, (b) Gear box, (c) Yaw components, (d) Wind turbine controllers, and (e) Parts of the goods specified at (a) to (d) above. (3) Blades for rotor of wind operated electricity generators, for the manufacture or the maintenance of wind operated electricity generators (4) Parts for the manufacture or the maintenance of blades for rotor of wind operated electricity generators (5) Raw materials for the manufacture of blades for rotor of wind operated electricity generators	5% 5% � 5% 5% 5%	� - - � - - Nil	35 35 35 35 35
225.	84 or any Chapter	Goods required for, - (a) the substitution of ozone depleting substances (ODS); (b) the setting up of new capacity with non - ODS technology. *Explanation* - �Goods�, for the purpose of this exemption means goods which are designed exclusively for non-ODS technology	Nil	Nil	36
226.	84 or any Chapter	(A) Machinery, instruments, apparatus and appliances, as well as parts (whether finished or not) or raw materials for the manufacture of aforesaid items and their parts, required for renovation or modernisation of a fertilizer plant; and (B) Spare parts, other raw materials (including semi-finished material) or consumables stores, essential for maintenance of the fertilizer plant mentioned above	5%	16%	37
227.		Omitted
228.	84 or any other Chapter	Goods specified in List 17 required for setting up crude petroleum refinery	5%	16%	-
229.	84 or any other Chapter	The following goods, namely: - (1) Kits required for the conversion of motor-spirit or diesel driven vehicles into Compressed Natural Gas driven or Propane driven or Liquefied Petroleum Gas driven vehicles; (2) Parts of the kits specified at (1) above	5%	-	39
230.	84 or any other Chapter	Goods specified in List 18 required for construction of roads	Nil	Nil	40
231.	84 or any other Chapter	Goods specified in List 19 required for development of Ports	10%	-	41
231A.	84 or any other Chapter	Goods specified in List 19A required for Inland Waterways	10%	-	41A
232.	84 or any other Chapter	Goods specified in List 20 required for development of Airports	10%	-	42
233.		Omitted
234.		Omitted
235.		Omitted
236.	84 or any Chapter	All goods, for renovation or modernisation of a power generation plant (other than captive power generation plant)	5%	16%	45
237.	84 or any Chapter	All goods, imported by a manufacturer-supplier for the manufacture and supply of machinery and equipment to a power generation plant (other than captive power generation plant)	5%	16%	46
238.	84 or any Chapter	a) Parts of catalytic convertors, for manufacture of catalytic convertors b) The following goods for manufacture of catalytic convertors and their parts, namely: - (a) Palladium (b) Platinum (c) Rhodium (d) Raw Substrate (ceramic) (e) Washcoated Substrate (ceramic) (f) Raw Substrate (metal) (g) Washcoated Substrate (metal) (h) Noble Metal Solution (i) Noble Metal Compounds	5% �� 5%	- �� -	5 5
239.	84, 85 or 90	Goods specified in List 22 required for basic telephone service, cellular mobile telephone service, internet service or closed user�s group 64 KBPS domestic data network via INSAT satellite system service	5%	16%	47
240.	84, 85 or 90	Goods specified in List 23 required for radio paging service	5%	16%	48
241.	84, 85 or 90	Goods specified in List 24 required for Public Mobile Radio Trunked Service (PMRTS)	5%	16%	49
242.	84, 85 or any other Chapter	Parts of goods specified at S. No. 239, 240 and 241 above	5%	16%	5
243.	84, 85 or 90	The goods specified in List 25, for the manufacture of goods falling under heading 85.41 or 85.42	Nil	-	5
244.	84, 85 or 90	The goods specified in List 26	15%	-	-
245.	84, 85 or 90	The goods specified in List 27	5%	-	50
246.	84, 85 or 90	The following goods, imported by an accredited press cameraman: - (i) Photographic cameras; (ii) Cinematographic cameras; (iii) Digital cameras; and (iv) Lenses, filters, flash light apparatus and exposure meters required for use with the aforesaid cameras	Nil	Nil	51
247.	84, 85 or 90	The following goods, imported by an accredited journalist: - (i) Personal computers including lap top personal computers; (ii) Typewriters; and (iii) Fax machines	Nil	Nil	52
248.	�84, 85 or 90	Goods specified in List 28 for use in pharmaceutical and biotechnology sector, imported for research and development purposes, by an importer registered with the Department of Scientific and Industrial Research, in the Ministry of Science and Technology of the Government of India;	Nil	Nil	53 (i)
248.	�84, 85 or 90	(2) Goods specified in List 28 for use in pharmaceutical and biotechnology sector, imported by a manufacturer, having a Research and Development wing registered with the Department of Scientific and Industrial Research, in the Ministry of Science and Technology of the Government of India.	Nil	Nil	53 (ii)
249.		Omitted
250.	84, 85 or 90	The following goods for use in the textile industry, namely: - (1) Machinery or equipment specified in List 30; (2) Parts, for manufacture, and spare parts for the maintenance, of the goods at (1) above	5% 5%	- � -	- 5
251.	84,85 or 90	The following goods for use in the textile industry, namely: - (1) Machinery or equipment specified in List 31; (2) Parts, for manufacture, and spare parts for the maintenance, of the goods at (1) above	5% 5%	Nil � Nil	- 5
252	84 or any other Chapter	The following goods for use in the silk textile industry, namely: - (1) Machinery or equipment specified in List 32, required for reeling, weaving, twisting, processing and printing; (2) Spare parts required for the maintenance of machinery or equipment specified at (1) above, imported by a silk mill	10% � 10%	Nil � Nil	5 5
253	84 or 85	The following goods for the manufacture of ground power units and air jet starters, namely: - (1) Diesel engines of 2400 rpm; (2) Alternators of 400 Hz, 115/200 V and 2400 rpm; (3) Oil free dry screw compressor	15%	-	-
254	84 or 85	Spares, supplied with outboard motors for maintenance of such outboard motors	5%	-	54
255	84 or 85	Parts of outboard motors specified in List 33	5%	-	55
256.	84 or 85	Braille printer or Braille embosser or Braille display, specially designed for computer systems	Nil	-	-
257.	84 or 90	Goods specified in List 34, designed for use in the leather industry	5%	Nil	-
258.		Omitted
259.	84	Fogging machines imported by a Municipal Committee, District Board or other authority legally entitled to, or entrusted by the Government with, the control or management of a Municipal Fund, for use in combating malaria and other mosquito borne diseases	5%	Nil	-
260.	84	Spinnerettes made inter-alia of Gold, Platinum and Rhodium or any one or more of these metals, when imported in exchange of worn-out or damaged spinnerettes exported out of India	25%	-	56
261.	84	Bushings made of Platinum and Rhodium alloy when imported in exchange of worn out or damaged bushings exported out of India	25%	-	57
262.		Omitted
263.		Omitted
264.		Omitted
265.	84.21	Catalytic convertors	5%	-	-
266.		Omitted
267.	84.32, 84.33, 84.36 or 84.37	All goods (other than lawn and sports ground rollers, goods falling under sub-headings 8433.11, 8433.19, 8437.80 and their parts)	15%	-	-
268.		Omitted
�69.		Omitted
270.	84.71	CD �Writers	Nil	-	-
271.	84.71	Point of Sale (POS) terminals	15%	-	-
272.	8472.90	Automatic teller machines and cash dispensers	15%	-	-
273.	8473 10 00	Printed circuit assemblies of word processing machines	15%	-	-
274.	8473 21 00	Parts of electronic calculators for the manufacture of electronic calculators	5%	-	5
275.	8473.30	Microprocessors for automatic data processing machines of heading 84.71, other than mother boards	Nil	-	-
276.	8473.30	Parts (including ink cartridges with print head assembly and ink spray nozzle) of the machines of heading 84.71, other than Populated Printed Circuit Boards (PPCBs) including motherboards (with or without CPU) *Explanation. -* The exemption shall not be available in the case of an assembly which includes any one or more of the following items, namely: - (i) Populated Printed Circuit Boards (PPCBs) (ii) Motherboards (with or without CPU) (iii) Power Supply Unit.	5%	-	-
277.	8473.40	Printed circuit assemblies (including Cash Dispensing Mechanism and Deposit Modules) for Automatic Teller Machines (ATMs)	15%	-	-
278.		Omitted
279.	85 or any other Chapter	Television equipment, cameras and other equipment for taking films, imported by a foreign film unit or television team	Nil	Nil	58
280.	85 or any other Chapter	Photographic, filming, sound recording and radio equipment, raw films, video tapes and sound recording tapes of foreign origin, if imported into India after having been exported therefrom	Nil	Nil	59
281.		Omitted
282.	85 or any Chapter	Raw materials or parts, for manufacture of button cells	15%	-	5
283.	85 or any other Chapter	The wireless apparatus, accessories and parts specified in List 35, imported by a licensed amateur radio operator	5%	-	60
284.		Omitted
285.	85 or any other Chapter	The following goods, namely: - (1) Mono or Bi polar Membrane Electrolysers and parts thereof including secondary brine purification components, jumper switches, filtering elements for hydrogen filters and any other machinery, required for modernisation by using membrane cell technology, of an existing caustic soda unit; (2) Membranes for replacement of worn out membranes in an industrial plant based on membrane cell technology	5%	-	62
286.	85 or any other Chapter	Goods imported for being tested in specified test centres	Nil	Nil	63
287.	85 or 90	Closed Circuit Television system used as Low Vision Aid for visually handicapped persons	15%	-	-
288.	85	(1) Newspaper page transmission and reception facsimile system or equipment; (2) Telephoto transmission and reception system or equipment	5%	-	64
289.	85	One set of pre-recorded cassettes accompanying books for learning languages and essential complement to such books	Nil	-	-
290.		Omitted
291.		Omitted
292.	85	Video cassettes and video tapes, of a predominantly educational character	5%	Nil	65
293.	85	Audio cassettes, if recorded with material from books, newspaper or magazines, for the blind	Nil	Nil	-
294.	85	Deflection components for use in colour monitors for computers or for use in PCBs of colour monitors for computers	Nil	-	5
295.	85	Floppy diskette	10%	-	-
296.	8501 10 12	Stepper Motors for use in the manufacture of goods falling under heading. 84.71	Nil	-	5
297.		Omitted
298.	8504.40	Static converters for automatic data processing machines and units thereof, and telecommunication apparatus	15%	-	-
299.	8504.50	Other inductors for power supplies for automatic data processing machines and units thereof, and telecommunication apparatus.	15%	-	-
300.	8504.90	Printed circuit assemblies for static converters for automatic data processing machines and units thereof, and telecommunication apparatus; printed circuit assemblies for inductors for power supplies for automatic data processing machines and units thereof, and telecommunication apparatus	15%	-	-
301.	8506 80 10	Button cells	15%	-	-
302.	8506 80 90	Battery Pack for cellular phones	15%	-	-
303.	8517 90 00	Parts (other than populated PCBs)	5%	-	-
304.	8518 29 00	Loudspeakers, without housing, having a frequency range of 300 Hz to 3, 4 KHz with a diameter not exceeding 50 mm for telecommunication use, cone type	10%	-	-
305.	8518 29 00	Loudspeakers, without housing, having a frequency range of 300 Hz to 3, 4 KHz with a diameter not exceeding 50 mm for telecommunication use, other than cone type	10%	-	-
306.	8518 30 00	Line telephone handsets	15%	-	-
307.	8518 90 00	Printed circuit assemblies for - (i) Microphones having a frequency range of 300 Hz to 3,4 KHz with a diameter not exceeding 10 mm. and a height not exceeding 3 mm. for telecommunication use; (ii) Loud speakers, without housing, having a frequency range of 300 Hz to 3,4 KHz with a diameter not exceeding 50 mm. for telecommunication use; or (iii) Line telephone handsets.	15%	-	-
308.	8522 90 00	Printed circuit assemblies for telephone answering machines	15%	-	-
309.	85.24	CD-ROMs containing books of an educational nature, journals, periodicals (magazines) or newspapers	Nil	-	-
310.	85.24	Recorded magnetic tapes and floppy diskettes, imported by the University Grants Commission for use in computers	5%	Nil	66
311.	8524 31 11	Compact Disc-Read Only Memory (CD-ROM)	Nil	-	-
312.	8525.10	Transmission apparatus other than apparatus for radio broadcasting or television	15%	-	-
313.	8525.20	Cellular Phones and Radio Trunking terminals	10%	-	-
314.	8525 40 00	Digital still image video cameras	15%	-	-
315.		Omitted
316.	8527.90	Portable receivers for calling, alerting or paging	10%	-	-
317.	8529.10	Aerials or antennae of a kind used with apparatus for radio-telephony and radio-telegraphy	10%	-	-
318.	8529 90 90	Parts (including populated PCBs) of portable receivers for calling, alerting or paging	5%	-	-
319.	8529 90 90	Parts of Cellular Phones and Radio Trunking terminals	5%	-	-
320.	8529 90 90 or any Chapter	Parts, components and accessories of mobile handsets including Cellular Phones	Nil	Nil	5
321.	8529 90 90	The following goods, namely: - (i) Parts (including populated PCBs) of digital still image video cameras (ii) Parts (excluding populated PCBs) of transmission apparatus other than apparatus for radio-broadcasting or television and parts (excluding populated PCB�s) of transmission apparatus incorporating reception apparatus	10% 5%	� - -	- -
322.	8529.90	Populated PCBs of, - (a) Transmission apparatus other than apparatus for radio broadcasting or television (b) Transmission apparatus incorporating reception apparatus	10%	-	-
323.	8531 20 00	Indicator panels incorporating Liquid Crystal Devices (LCD)	Nil	-	-
324.	8531 20 00	Indicator panels incorporating Light Emitting Diodes (LED)	15 %	-	-
325.	8531 80 00	Flat panel displays of a kind used in automatic data processing machines and tele- communication apparatus	15%	-	-
326.	8531 90 00	Parts of indicator panels incorporating Liquid Crystal Devices (LCD)	Nil	-	-
327.	8531 90 00	Parts of indicator panels incorporating Light emitting diodes (LED)	15%	-	-
328.	8531 90 00	Parts of electronic security systems for the manufacture of electronic security systems	15%	-	5
329.	8536.50	Electronic AC switches consisting of optically coupled input and output circuits (insulated thyristor AC switches)	15%	-	-
330.	8536.50	Electronic switches, including temperature protected electronic switches, consisting of a transistor and a logic chip (chip-on-chip technology) for a voltage not exceeding 1000 volts	15%	-	-
331.	8536.50	Electromechanical snap-action switches for a current not exceeding 11 amperes, switches of contact rating less than 5 amperes at voltage not exceeding 250 volts	15%	-	-
332.	8536.69	Plugs and sockets for co-axial cables and printed circuits	15%	-	-
333.	8536.90	Connection and contact elements for wires and cables	15%	-	-
334.	8536.90	Wafer probers	Nil	-	-
335	8538 90 00	Printed circuit assemblies for the following goods of heading 85.36, namely: - (1) Electronic AC switches consisting of optically coupled input and output circuits (insulated thyristor AC switches); (2) Electronic switches, including temperature protected electronic switches, consisting of a transistor and a logic chip (chip-on-chip technology) for a voltage not exceeding 1000 volts; (3) Electro-mechanical snap-action switches for a current not exceeding 11 amperes, switches of contact rating less than 5 amperes at voltage not exceeding 250 volts; (4) Plugs and sockets for co-axial cables and printed circuits; (5) Connection and contact elements for wires and cables; (6) Wafer probers	15%	-	-
336.		Omitted
337.	8543.89	Electrical machines with translation or dictionary functions	15%	-	-
338.	8543.89	Complete Ozone generators	15%	-	-
339.	8543 90 00	Printed circuit assemblies for - (i) Proximity cards and tags; (ii) Electrical machines with translation or dictionary functions.	15%	-	-
340.	8544.41 or 8544.49	Electric conductors, for a voltage not exceeding 80 V, of a kind used for telecommunications	15%	-	-
341.	8544.51	Electric conductors, for a voltage exceeding 80 V, but not exceeding 1000 V, fitted with connectors, of a kind used for telecommunications	15%	-	-
342.	85.45	Graphite electrodes (above 24 inches diameter) for use in the manufacture of goods falling under Chapter 72	15%	-	5
343.	87	Tricycles designed for use by crippled and disabled persons	15%	-	-
344.	8703	Motor cars and other motor vehicles principally designed for the transport of persons (other than those of heading 87.02), including station wagons and racing cars, new, which have not been registered anywhere prior to importation, - (a) if imported as Completely Knock Down (CKD) Units (b) if imported in any other form	25% 60%	- -	- -
344A.	8703	Golf Cars	25%	16%	-
345.	8711	Motor Cycles (including Mopeds) and Cycles fitted with an auxiliary motor, with or without side cars, and side cars, new, which have not been registered anywhere prior to importation, - (a) if imported as Completely Knock Down (CKD) Units (b) if imported in any other form	60% 30%	- �-	- �-
346.	88	Aeroplanes, gliders, helicopters or simulators of aeroplanes	Nil	-	-
347.	88 or any Chapter	Parts of aeroplanes, gliders, helicopters or simulators of aircraft (excluding rubber tyres and tubes for aeroplanes or gliders)	Nil	Nil	67
348.	88 or any Chapter	Raw materials - (i) for manufacture or servicing of aircraft falling under heading 88.02; (ii) for manufacture of parts of aircraft at (i) above	Nil	Nil	68
349.	88 or any Chapter	The following goods, namely: - (i) Satellites and pay-loads brought into India for launch by Indian launch vehicles from Indian soil into Outer Space; (ii) Ground equipment brought for testing of (i) above	Nil	Nil	69
350.	89	Barges imported along with ships for the more speedy unloading of imported goods and loading of export goods	Nil	Nil	70
351.	89 or any Chapter	Capital goods and spares thereof, raw materials, parts, material handling equipment and consumables, for repairs of ocean-going vessels by a ship repair unit registered with the Director General of Shipping, Government of India	Nil	Nil	71
352.	89.01	All goods (excluding vessels and other floating structures as are imported for breaking up)	Nil	Nil	72
353.	8902, 8904 00 00, 8905 10 00 or 8905 90	All goods (excluding vessels and other floating structures as are imported for breaking up)	5%	Nil	72
354.	89.06	All goods (excluding vessels and other floating structures as are imported for breaking up)	Nil	Nil	72
355.	8908 00 00	All goods	-	Nil	-
356.	Any Chapter	Raw materials and parts, for use in the manufacture of goods falling under headings 89.01, 89.02, 89.04, 89.05 (except sub-heading 8905.20) or 89.06, in accordance with the provisions of section 65 of the Customs Act, 1962 (52 of 1962)	Nil	Nil	73
357.	Any Chapter	Parts, for repair of dredgers	Nil	Nil	-
358.	90 or any other Chapter	Medical and surgical instruments, apparatus and appliances including spare parts and accessories thereof	Nil	Nil	74
359.		Omitted
360.	90 or any other Chapter	Parts (other than primary cells and primary batteries), for the manufacture of hearing aids including deaf aids	5%	Nil	5
361.	90 or any other Chapter	Equipment, parts or accessories required for initial setting up, repair or maintenance of a planetarium	15%	Nil	76
362.	90 or any Chapter	�Hospital Equipment (equipment, apparatus and appliances, including spare parts and accessories thereof, but excluding consumable items) for use in specified hospitals	5%	Nil	77
363.	90 or any other Chapter	The following goods, namely: - (A) Medical equipment (excluding Foley Balloon Catheters) and other goods, specified in List 37; (B) Accessories of the medical equipment at (A) above; (C) Parts required for the manufacture, and spare parts required for the maintenance, of the medical equipment at (A) above; (D) Continuous Ambulatory Peritoneal Dialysis (CAPD) Fluid contained in a solution bag with or without tubing system; (E) Accessories of (D) above; (F) Parts required for the manufacture of (D) above	�5% �5% �5% �5% �5% 5%	- �- Nil - - -	� - � - � 11 - � - 11
364.	90 or any other Chapter	Blood Glucose Monitoring System (Glucometer) and test strips	5%	-	-
365.	90 or any other Chapter	Life saving medical equipment including accessories or spare parts or both of such equipment	� 5%	Nil	78
366.	90 or any other Chapter	Parts required for the manufacture, and spare parts required for the maintenance, of medical equipment falling under headings 90.18 to 90.21 and sub-headings 9022.12, 9022.13, 9022.14 or 9022.21	15%	-	11
367.	90 or any other Chapter	The following goods, namely: - (A) Medical equipment and other goods, specified in List 38; (B) Parts required for the manufacture, and spare parts required for the maintenance, of the medical equipment at (A) above	5% 5%	- Nil	- 11
368.	90 or any other Chapter	The following goods, namely: - (A) Medical equipment and other goods, specified in List 39; (B) Accessories of the medical equipment at (A) above; (C) Parts required for the manufacture, and spare parts required for the maintenance, of the medical equipment at (A) above	5% 5% 5%	- - � Nil	- - 11
369.	90 or any other Chapter	Goods for Tubal Occlusion specified in List 40	5%	-	-
370.	90 or any other Chapter	Goods specified in List 41 imported by a handicapped or disabled person for his personal use �	Nil	Nil	79
371.	90 or 9804 90 00	Hearing aid appliances	5%	-	-
372.	90	External silicone breast prosthesis	15%	-	-
373.	90	Spare parts of hearing aids	5%	-	-
374.	90.01	�Optical fibre, for the manufacture of telecommunication grade optical fibre cables	15%	-	5
375.	9001 10 00	Optical fibre cables	20%	-	-
376.	9006 91 00	Parts and accessories of Photographic cameras for the manufacture of Photographic cameras	15%	-	5
377.	90.07, 9009 91 00, 9009 92 00, 9009 93 00, 9009 99 00, 9010 10 00, 9010 50 00 or 9010 90 00	�All goods	15%	-	-
378.	9013 80	Liquid crystal devices	Nil	-	-
379.	9013 90	Parts and accessories of Liquid crystal devices	Nil	-	-
380.	9017 10 00 or 9017 20	Drafting or drawing machines	15%	-	-
381	9017 90 00	Printed circuit assemblies for drafting or drawing machines of heading 90.17	15%	-	-
382	90.22	X-Ray Baggage Inspection Systems and parts thereof	Nil	-	81
383.	90.22	Linear accelerator with beam energy 15 MeV and above	5%	Nil	-
384.	90.22 or 90.31	Sulphur Content Analyser	25%	-	-
385.	9027 90	Parts and accessories of products of heading 90.27, other than for gas or smoke analysis apparatus and microtomes	Nil	-	-
386.	90.32	Electronic Automatic Regulator (EAR) in MPFI system run vehicles	25%	-	-
387.		Omitted
388.	91 or 9804 90 00	Braille watches and Braille one-day alarm clocks	Nil	-	-
389.	91	Parts and cases, of Braille watches, for the manufacture of Braille watches	Nil	-	5
390.	94.05	Lamps and lighting fittings for use in sports or games stadium	15%	-	82
391.	95 or any other Chapter	(i) Synthetic tracks and artificial surfaces of heading.95.06; (ii) Equipment required for installation of (i) above	Nil	Nil	83
392.	95 or any Chapter	The following goods for laying synthetic tracks and artificial surfaces of heading 95.06, namely: - (1) Asphalt resurfacer; (2) Acrylic resurfacer; (3) Cushion coat; (4) Acrylic colour concentrate; (5) Acrylic marking paint; and (6) Polytan in powder or granule form	Nil	Nil	84
393.	95	Requisites for games and sports	Nil	Nil	85
394.	9503 10 00 and 9503 90	Parts of electronic toys for the manufacture of electronic toys	5%	-	5
395.	95.04	Parts of video games for the manufacture of video games	5%	-	5
396.	9608.60, 9608.91 or 9608.99	�(A) The following goods, namely: - (i) Refills for ball point pens, comprising the ball point and ink-reservoir; (ii) Pen nibs and nib points; (iii) Parts (including caps and clips) of pens of any kind and pen-holders described in heading 96.08 (B) The following goods, for use in the manufacture of parts of pens of any kind or pen holders, namely: - (i) Acrylic/ Polyester fibre rod falling under sub-heading 3916.90;� (ii) Polyester sheet falling under heading 39.20;� (iii) Nylon yarn falling under sub- heading 5402.41; and� (iv) Stainless steel strips falling under sub-heading 7220.90;	15% 15%	- -	- 5
397.	97	Works of art created abroad by Indian artists and sculptors, imported on the return of such artists or sculptors to India	Nil	Nil	-
398.	9706 00 00	Books, being antiques of an age exceeding one hundred years	Nil	-	-
399.	98.01	Goods required for- (i) Fertiliser projects; (ii) Coal mining projects; (iii) Captive power plants of 5 MW or more; (iv) Power generation projects including gas turbine power projects (excluding captive power plants set up by projects engaged in activities other than in power generation); (v) Barge mounted power plants (vi) Power transmission projects of 66 KV and above; (vii) Other industrial plants or projects	5% 5% 25% 5% 5% 25% 25%	16% 16% 16% 16% Nil 16% 16%	- - - - - - -
400.	9801	Goods required for setting up of any Mega Power Project, that is to say - (a) an inter-State thermal power plant of a capacity of 1000 MW or more; or (b) an inter-State hydel power plant of a capacity of 500 MW or more, as certified by an officer not below the rank of a Joint Secretary to the Government of India in the Ministry of Power	Nil	Nil	86
401.	98.01	Goods required for setting up of any Nuclear Power Project specified in List 43, having a capacity of 440 MW or more, as certified by an officer not below the rank of a Joint Secretary to the Government of India in the Department of Atomic Energy	Nil	Nil	87
401A.	98.01	Drinking Water Supply Projects for supply of water for human or animal consumption *Explanation:* For the purposes of this exemption, Drinking Water Supply Project includes a plant for desalination, demineralization or purification of water or for carrying out any similar process or processes intended to make the water fit for human or animal consumption, but does not include a plant supplying water for industrial purposes.	Nil	Nil	-
402.		Omitted
403.	98.04	The following goods, imported by post or air, for personal use, namely: - (A) The life saving drugs or medicines (including diagnostic test kits) specified in List 4; (B) Other life saving drugs or medicines	��Nil Nil	� Nil Nil	- 8
404.	98.05	All goods	-	16%	-
405.	Any Chapter	Used bona fide personal and household effects belonging to a deceased person	Nil	Nil	88
406.	Any Chapter	Goods imported through postal parcels, packets and letters, the duty payable on which is not more than one hundred rupees	Nil	Nil	-
407.	Any Chapter	Archaeological specimens, photographs, plaster casts or antiquities, intended for exhibition for public benefit in a museum managed by the Archaeological Survey of India or by a State Government	Nil	Nil	89
408.	99	All goods	-	Nil	-
409.	Any Chapter	Artificial Plasma	5%	�-	-
410.		Omitted
411.		Omitted
412.		Omitted
413.		Omitted
414.		Omitted
415.	7320 90 90, 8445, 8448 20 00, 8483 90 00, 8484 90 00, 8485 90 00	�(1) Goods imported by a jute mill for making jute textiles (2) Spare parts required for the maintenance of goods specified in (1), imported by a jute mill	- -	Nil Nil	5 5
416.	0508 00	Conch shell	5%	-	-
417.	1301 10 20	Seed Lac	5%	-	-
418.	28, 29, 32, 39, 70 or 90	Following goods for manufacture of telecommunication grade impregnated glass reinforcement roving, namely, - (i) E-glass roving/yarn; (ii) liquid absorbent polymer; (iii) polyurethane polymer; (iv) vinyl polymer	15%	-	5
419.	2902 4300	p-Xylene	5%	-	-
420.	30 or any other Chapter	Drugs and materials	Nil	Nil	90
421.	70	Toughened glass with low iron content and transmissivity of minimum 91% and above, for use in solar thermal collectors or heaters	5%	�-	5
422.	71	Semi-processed, half-cut or broken diamonds	Nil	-	-
423.	68, 72 or 85	The following goods, namely: - (1) Graphite Felt or graphite pack for growing silicon ingots; (2) Thin steel wire used in wire saw for slicing of silicon wafers	5%	Nil	5
424.	84 or any other Chapter	Goods specified in List 44 required for use in high voltage power transmission project	5%	-	91
425.	84, 85 or 90	The following goods for use in man-made or synthetic fibre or yarn industry, namely: -
		(1) Machinery or equipment specified in List 45;	5%	-	-
		(2) Parts for manufacture of the goods at (1) above	5%	-	5
426.	84, 85 or 90	The following goods for use in textiles industry; namely: -
		(1) Machinery or equipment specified in List 46;	5%	-	-
		(2) Parts for manufacture of the goods at (1) above	5%	-	5
427.	85.17	Routers, modems and fixed wireless terminals (FWT)	10%	-	-
428.	86	Parts and spares for diesel locomotives;	15%	-
429.	86	Loco simulators	5%	-	-
430.	86 or any other Chapter	Parts and electrics for DC to AC conversion for EMU locomotives	15%	-
431.	8704	Refrigerated trucks	20%	-	-
432.	90 or any other Chapter	The following goods for physically disabled persons, namely, - (i) Crutches; (ii) Wheel chair and parts thereof; (iii) Walking frames; (iv) Tricycles; (v) Braillers; (vi) Artificial limbs	5%	-	-
433.	9801	Goods required for -
		(1) Project for LNG Degasification Plant	5%	16%	-
		(2) Aerial Passenger Ropeway Project	5%	Nil	-

ANNEXURE

C. No.	Conditions
1.	The rate of duty specified in column (4) shall apply to such quantity of imports for which an importer holds a Tariff Rate Quota Allocation Certificate issued by the EXIM Facilitation Committee in the Directorate General Of Foreign Trade in accordance with the procedure as may be specified by the EXIM Facilitation Committee in the Directorate General Of Foreign Trade from time to time through a Public Notice.
2.	If the importer gives a declaration that such material is for the purposes of sowing or planting only.
3.	If, - (a) import is made under a licence issued under Section J of Part � II of Chapter 15 of the Export and Import Policy 1^st April 1997 � 31^st March, 2002; (b) the importer at the time of clearance, furnishes a certificate, from an officer not below the rank of a Deputy Secretary to the Government of India in the Ministry of Tourism to the effect that the goods imported are essential goods related to hotel and tourism industry and that the hotel or restaurant importing such goods is approved by that Ministry.
4.	If the importer, is registered with the Directorate of Vanaspati, Vegetable Oils and Fats in the Department of Food and Public Distribution in the Government of India.
5	If the importer follows the procedure set out in the Customs (Import of Goods at Concessional Rate of Duty for Manufacture of Excisable Goods) Rules, 1996.
6.	If the importer furnishes an undertaking to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, that the wine shall be used as sacramental wine.
7.	If, at the time and place of importation, the importer produces to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, a certificate to the effect that the Liquefied Natural Gas (LNG) terminal which is to supply LNG to the power project for which the import is being made, has not been commissioned.
8.	If, - (a) the goods are imported by an individual for personal use; (b) it is certified in the Form below, by the Director General or Deputy Director General or Assistant Director General, Health Services, New Delhi, Director of Health Services of the State Government or the District Medical Officer/ Civil Surgeon of the district, in each individual case, that the goods are life saving drugs or medicines; and (c) the importer produces the said certificate to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, at the time of clearance, or gives an undertaking as acceptable to the Deputy Commissioner or the Assistant Commissioner to furnish the said certificate within such period as may be specified by the Deputy Commissioner or the Assistant Commissioner, failing which to pay duty leviable thereon.� � FORM Certificate No....��. of �...��.. (year) Certified that the drug/ medicine��.(name of the drug/ medicine) being imported by ��................... is a life saving drug/ medicine and exemption from the payment of customs duty is recommended. �� Signature with date of Director General/ Deputy Director General/ Assistant Director General, Health Services, New Delhi or Director of Health Services or District Medical Officer/ Civil Surgeon
9.	If the importer at the time of import- (1) furnishes a certificate from an officer not below the rank of a Deputy Secretary to the Government of India in the Department of Atomic Energy, Government of India, to the effect that the imported goods (in respect of description, quantity and technical specifications) are required for the manufacture of laser and laser based instrumentation; and (2) furnishes an undertaking to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, to the effect that the imported goods shall be used for the above purpose and he shall pay, on demand, in the event of his failure to use the imported goods for the above purpose, an amount equal to the difference between the duty leviable on such quantity of the imported goods but for the exemption under this notification and that already paid at the time of importation.
10.	If, - (a) the importer produces a certificate from a duly authorised officer of the UNICEF to the effect that the said raw materials, intermediates and consumables are required for the manufacture of DTP vaccines; and (b) the importer, at the time of clearance, furnishes an undertaking, in each case, to the effect that the said raw materials, intermediates and consumables shall be used only for the manufacture of DTP vaccines.
11.	If the importer furnishes an undertaking to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, to the effect that- (a) the parts or, as the case may be, the spare parts shall be used for the manufacture or maintenance, as the case may be, of the specified medical equipment; (b) he shall, within three months or such extended period that the said Deputy Commissioner or the Assistant Commissioner may allow, produce - (i) in the case of parts, a certificate from the Deputy Commissioner of Central Excise or the Assistant Commissioner of Central Excise, as the case may be, having jurisdiction over the factory manufacturing the specified medical equipment, to the effect that the parts have been used in the manufacture of the specified medical equipment; or (ii) in the case of spare parts, necessary evidence to the satisfaction of the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, to the effect that the spare parts have been used for the maintenance of the specified medical equipment; and (c) he shall pay, on demand, in the event of his failure to comply with the above conditions, an amount equal to the difference between the duty leviable on such quantity of the parts or, as the case may be, spare parts, but for the exemption under this notification and that already paid at the time of importation.
12.	If, - (a) the goods are imported by a manufacturer of handicrafts for use in the manufacture of handicrafts for export by that manufacturer and that the said manufacturer is registered with the Export Promotion Council for Handicrafts; (b) the value of the goods imported does not exceed 3% of the FOB value of handicrafts exported during the preceding financial year; and (c) the importer produces a certificate from the Export Promotion Council for Handicrafts certifying the value of exports made during the financial year mentioned in clause (b) above and also the description, value and quantity of the item(s) already imported under this notification during the current financial year
�13.	If, imported for the manufacture of solar cells or solar cell modules.
�14.	If certified by the Ministry of Information and Broadcasting that the films and videocassettes are intended for archival study, or record and reference purposes.
15.	If, the Central Board of Film Censors or, an officer not below the rank of a Director, All India Radio or Doordarshan, as the case may be, certifies that the said film is predominantly educational in character.
16.	If certified by the Ministry of Defence that the film is predominantly educational in character and is meant for training of defence personnel.
17.	If the importer produces a certificate of the Reference Standard and copies of documents to substantiate that the organization or institution from where the Reference Standard has been imported is approved by the World Health Organisation or International Organisation for Standards.
18.	If, imported for the manufacture of Copper - T contraceptives.
19.	If, - (a) the pulp of wood is imported for the manufacture of newsprint, that is to say, paper intended for the printing of newspapers, books and periodicals; and (b) the newsprint manufactured in terms of (a) above is supplied to a newspaper. �Explanation: For the purpose of this condition, �newspaper� means a newspaper registered by the Registrar of Newspapers for India under the provisions of the Press and Registration of Books Act, 1867 (25 of 1867).
20.	If, - (a) the importer furnishes an undertaking to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, that such imported goods will be used for the purpose specified and in the event of his failure to comply with this condition, he shall be liable to pay, in respect of such quantity of the said goods as is not proved to have been so used, an amount equal to the difference between the duty leviable on such quantity but for the exemption under this notification and that already paid at the time of importation; and (b) the importer produces to the said Deputy Commissioner or Assistant Commissioner, as the case may be, within six months or such extended period, as that Deputy Commissioner or Assistant Commissioner may allow, a certificate issued by the Deputy Commissioner of Central Excise or the Assistant Commissioner of Central Excise, as the case may be, in whose jurisdiction the said goods have been used in such unit, that the said goods have been so used.
21.	If, - (a)�� The goods are imported by a manufacturer of textile garments or leather garments for use in the manufacture of said goods for export by that manufacturer and the said manufacturer is registered with the Apparel Export Promotion Council or Council for leather Exports, as the case may be; (b)�� The total value of goods, imported shall not be exceed 3 percent of the FOB value of textile garments or leather garments exported during the preceding financial year, however, the value of lining, and inter-lining materials imported shall not exceed 2 percent of the said total value; (c)�� The importer produces a certificate from the Apparel Export Promotion Council or Council for Leather Exports, as the case may be, certifying the value of exports made during the financial year mentioned in clause (b) above, and also the value and quantity of goods already imported under this notification during the current financial year; (d)�� The importer produces a certificate from Apparel Export Promotion Council or Council for Leather Exports, as the case may be, certifying that the lining and inter-lining materials shall not be put to any other use or sold in the market except in the manufacture of textile garments or leather garments; and (e)�� There is a doubt as to the usability of lining and interlining materials in relation to the export product, the Commissioner of Customs, for reasons to be recorded in writing, orders drawal of sample at the time of export to verify such use;�
21A.	If, - (a)�� The goods are imported by a manufacturer of lather footwear, leather gloves, or travel goods, hand bags and similar containers all made of leather or leather harness or leather saddlery for use in the manufacture of said goods, for export by that manufacturer and the said manufacturer is registered with the Council for Leather Exports; (b)�� The total value of goods, imported shall not exceed 1 percent of the FOB value of lathers footwear, leather gloves, or travel goods, handbags and similar containers all made of leather or leather harness or leather saddlery, exported during the preceding financial year; (c)�� The importer produces a certificate from the council for Leather Exports certifying the value of export made during the financial year mentioned in sub-condition (b), and also the value and quantity of goods already imported under this notification during the current financial year.
22.	If at the time of importation, the importer, - (1) in all cases [excluding the case of the goods at item No. 9 of List 9 (B)], produces a valid registration-cum-membership certificate issued by the Council for Leather Exports sponsored by the Government of India in the Ministry of Commerce and Industry; and (2) furnishes an undertaking to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, to the effect that - (a) the imported goods shall be used in the leather industry, or as the case may be, for the manufacture of leather chemicals to be used in the leather industry; (b) he shall maintain an account of the imported goods, received and consumed in the place of manufacture for the above purpose, in the manner specified by the said Deputy Commissioner or the Assistant Commissioner; (c) he shall, within three months or such extended period as the said Deputy Commissioner or the Assistant Commissioner may allow, produce the extract of the aforesaid account, duly certified by the Deputy Commissioner of Central Excise or the Assistant Commissioner of Central Excise, as the case may be, having jurisdiction over the factory manufacturing the goods, to the effect that the said goods have been used for the aforesaid purpose; and (d) he shall pay, in the event of his failure to comply with the conditions above, an amount equal to the difference between the duty leviable on the imported goods but for the exemption under this notification and that already paid at the time of importation.
23.	If the importer produces a certificate from an officer not below the rank of a Joint Director in the Ministry of Information Technology, Government of India, mentioning the technical specifications, description and quantity of the moulds, tools and dies and certifying that they are required for the manufacture of electronic parts and recommending grant of exemption.
24.	If the said coins are imported with the approval of the Reserve Bank of India and are utilised for disbursement by the Scheduled bank in accordance with the regulations of the Reserve Bank of India, sanctioning foreign exchange for travellers. *Explanation:* The expression �Scheduled bank� means the State Bank of India constituted under the State Bank of India Act, 1955 (23 of 1955), a subsidiary bank as defined in the State Bank of India (Subsidiary Banks) Act, 1959 (38 of 1959), a corresponding new bank constituted under section 3 of the Banking Companies (Acquisition and Transfer of Undertakings) Act, 1970 (5 of 1970) or any other bank, being a bank included in the Second Schedule to the Reserve Bank of India Act, 1934 (2 of 1934).
25.	If the horological raw materials are imported for the manufacture of parts of wrist watches (watches designed primarily to show the time of the day, with or without additional features), mechanical or quartz analog.
26.	If the importer furnishes an undertaking to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, that the coin blanks shall be used only for the purpose of coining of coins in a Mint of the Government of India.
27.	Omitted
28.	Omitted
28A.	If, - (1) the dies for drawing metal, acquired in exchange, are imported within one year of the date of exportation of similar dies out of India for repairs; and (2) no drawback of duty has been paid on the occasion of their export. *Explanation:* On the imports referred to in condition (1) above, the duty would be leviable as if the value of the said dies were equal to � (i) the aggregate of � (a) labour charges for such repair; (b) cost of materials used in such repair; (c) any other charges paid by the importer for repair of such dies; and (ii) the insurance and freight charges, both ways.
28B.	If - (i) zinc metal is imported within one year of the date of export of zinc concentrate out of India; and (ii) sufficient evidence exists to establish that the zinc metal, which is imported has in fact been obtained out of toll smelting or toll processing of zinc concentrate exported out of India. *Explanation:* On the imports referred to in condition (1) above, the duty shall be leviable as if the value of the said metal were equal to the aggregate of - (i) the toll smelting or toll processing costs, as the case may be, that is to say, - (a) labour charges; (b) cost of materials (other than the cost of goods exported out of India) used in such toll smelting or toll processing; and (c) any other charges which are payable in connection with the toll smelting or toll processing abroad; and (ii) the insurance and freight charges, both ways.
29.	If, - (a) the goods are imported by the Oil and Natural Gas Corporation or Oil India Limited (hereinafter referred to as the �licensee�) or a sub-contractor of the licensee and in each case in connection with petroleum operations to be undertaken under petroleum exploration licenses or mining leases, as the case may be, issued or renewed after the 1^st of April, 1999 and granted by the Government of India or any State Government on nomination basis; (b) where the importer is a licensee, he produces to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, at the time of importation, the following, namely, a certificate from a duly authorised officer of the Directorate General of Hydro Carbons in the Ministry of Petroleum and Natural Gas, Government of India, to the effect that the imported goods are required for petroleum operations referred to in clause (a) and have been imported under the licences referred to in that clause, and (c) where the importer is a sub-contractor, he produces to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, at the time of importation, the following, namely: - (i) a certificate from a duly authorised officer of the Directorate General of Hydro Carbons in the Ministry of Petroleum and Natural Gas, Government of India, to the effect that the imported goods are required for petroleum operations referred to in clause (a) and have been imported under the licenses or mining leases, as the case may be, referred to in that clause and containing the name of such sub-contractor, (ii) an affidavit to the effect that such sub-contractor is a bona-fide sub-contractor of the licensee or lessee, as the case may be, (iii) an undertaking from such licensee or lessee, as the case may be, binding him to pay any duty, fine or penalty that may become payable, if any of the conditions of this notification are not complied with by such sub-contractor or licensee or lessee, as the case may be, and (iv) a certificate, in the case of a petroleum exploration license or mining lease, as the case may be, issued or renewed after the 1^st of April, 1999, by the Government of India or any State Government on nomination basis, that no foreign exchange remittance is made for the import of such goods undertaken by the sub-contractor on behalf of the licensee or lessee, as the case may be: Provided that nothing contained in this sub-clause shall apply if such sub-contractor is an Indian Company or Companies.
30.	If, - (a) the parts and raw materials are used in the manufacture of goods in accordance with the provisions of section 65 of the Customs Act, 1962 (52 of 1962); and (b) a certificate is produced in each case to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, from a duly authorized officer of the Directorate General of Hydrocarbons in the Ministry of Petroleum and Natural Gas, Government of India, to the effect that the goods are required for the purposes of off-shore oil exploration or exploitation.
31.	If, - (a) the goods are imported by an Indian Company or Companies, a Foreign Company or Companies, or a consortium of an Indian Company or Companies and a Foreign Company or Companies (hereinafter referred to as the �contractor�) or a sub-contractor of the contractor and in each case in connection with petroleum operations to be undertaken under a contract with the Government of India; (b) where the importer is a contractor, he produces to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, at the time of importation, the following, namely: - (i) a certificate from a duly authorised officer of the Directorate General of Hydro Carbons in the Ministry of Petroleum and Natural Gas, Government of India, to the effect that the imported goods are required for petroleum operations referred to in clause (a) and have been imported under the contract referred to in that clause, and (ii) a certificate in the case of a contract entered into by the Government of India and a Foreign Company or Companies or, the Government of India and a consortium of an Indian Company or Companies and a Foreign Company or Companies, that no foreign exchange remittance is made for the imports of such goods undertaken by such Foreign Company or Companies; (c) where the importer is a sub-contractor, he produces to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, at the time of importation, the following, namely: - (i) a certificate from a duly authorised officer of the Directorate General of Hydro Carbons, in the Ministry of Petroleum and Natural Gas, Government of India, to the effect that the imported goods are required for petroleum operations referred to in clause (a) and have been imported under the contract referred to in that clause and containing, the name of such sub-contractor, (ii) an affidavit to the effect that such sub-contractor is a bona-fide sub-contractor of the contractor, (iii) an undertaking from such contractor, binding him to pay any duty, fine or penalty that may become payable, if any of the conditions of this notification are not complied with, by such sub-contractor or contractor, as the case may be, and (iv) a certificate, in the case of a contract entered into by the Government of India and a Foreign Company or Companies or, the Government of India and a consortium of an Indian Company or Companies and a Foreign Company or Companies, that no foreign exchange remittance is made for the import of such goods undertaken by the sub-contractor on behalf of the Foreign Company or Companies: Provided that nothing contained in this sub-clause shall apply if such sub-contractor is an Indian Company or Companies.
32.	If, - (a) the goods are imported by an Indian Company or Companies, a Foreign Company or Companies, or a consortium of an Indian Company or Companies and a Foreign Company or Companies (hereinafter referred to as the �contractor�) or a sub-contractor of such Company or Companies or such consortium and in each case in connection with petroleum operations or coal bed methane operations, as the case may be, to be undertaken under a contract signed with the Government of India, on or after the 1^st day of April,1998, under the New Exploration Licensing Policy, or on or after the 1^st day of April 2001 in terms of the Coal Bed Methane Policy, as the case may be; (b) where the importer is a contractor, he produces to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, at the time of importation, the following, namely: - (i) a certificate from a duly authorised officer of the Directorate General of Hydrocarbons in the Ministry of Petroleum and Natural Gas, Government of India, to the effect that the imported goods are required for such petroleum operations or coal bed methane operations, as the case may be, and have been imported under a contract signed under the New Exploration Licensing Policy or the Coal Bed Methane Policy, as the case may be; and (ii) a certificate, in the case of a contract entered into by the Government of India and a Foreign Company or Companies or, the Government of India and a consortium of an Indian Company or Companies and a Foreign Company or Companies, that no foreign exchange remittance is made for the imports of such goods undertaken by the Foreign Company or Companies; (c) where the importer is a sub-contractor, he produces to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, at the time of importation, the following, namely: - (i) a certificate from a duly authorised officer of the Directorate General of Hydrocarbons, in the Ministry of Petroleum and Natural Gas, Government of India, to the effect that the imported goods are required for petroleum operations or coal bed methane operations, as the case may be, referred to in clause (a) and have been imported under a contract signed under the New Exploration Licensing Policy or the Coal Bed Methane Policy, as the case may be, and containing the name of such sub-contractor, (ii) an affidavit to the effect that such sub-contractor is a bona-fide sub-contractor of the contractor, (iii) an undertaking from such contractor, binding him to pay any duty, fine or penalty that may become payable, if any of the conditions of this notification are not complied with, by such sub-contractor or contractor, as the case may be; and (iv) a certificate, in the case of a contract entered into by the Government of India and a Foreign Company or Companies or, the Government of India and a consortium of an Indian Company or Companies and a Foreign Company or Companies, that no foreign exchange remittance is made for the import of such goods undertaken by the sub-contractor on behalf of the Foreign Company or Companies: Provided that nothing contained in this sub-clause shall apply if such sub-contractor is an Indian Company or Companies.
33.	If, - (a) the goods at (i) to (vi) in List 14 appended to the notification are imported for use in the fly ash based building materials industry or the goods at (vii) to (xii) are imported for use in the phosphogypsum based building materials industry or the goods at (xiii) to (xviii) are imported for making clay-fly ash bricks or the goods at (xix) to (xxvii) of that List are imported for production of pre-fabricated parts; (b) an officer not below the rank of a Deputy Secretary to the Government of India in the Ministry of Urban Development and Poverty Alleviation certifies in each case that the said goods are for use in the industry specified above and recommends grant of the exemption; and (c) the importer furnishes to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, an undertaking to the effect that he shall use the goods for the purpose specified and in the event of his failure to do so, he shall be liable to pay an amount equal to the difference between the duty leviable on the said imported goods but for the exemption under this notification and that already paid at the time of importation.
34.	�If the importer produces to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, at the time and place of importation, a certificate issued by the Gem and Jewellery Export Promotion Council mentioning the technical specifications, description and quantity of the goods and certifying that the said goods are required for the setting up of a Training and Development Project by the importing institute and recommending the grant of exemption in each case.
35.	If the importer at the time of importation, - (a) furnishes in all cases a certificate to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, from an officer not below the rank of a Deputy Secretary to the Government of India in the Ministry of Non-Conventional Energy Sources recommending the grant of this exemption and in the case of the goods at (2) to (5), the said officer certifies that the goods are required for the specified purposes; and (b) furnishes an undertaking to the said Deputy Commissioner or Assistant Commissioner to the effect that, - (i) in the case of wind operated electricity generators upto 30 KW or wind operated battery chargers upto 30 KW, he shall not sell or otherwise dispose off, in any manner, such generators or chargers for a period of two years from the date of importation; (ii) in the case of other goods specified at (2) to (5), he shall use them for the specified purpose; and (iii) in case he fails to comply with sub-conditions (i) or (ii), or both conditions, as the case may be, he shall pay an amount equal to the difference between the duty leviable on the imported goods but for the exemption under this notification and that already paid at the time of importation.
36.	If, - (a) the project for substitution of ozone depleting substances (ODS) or the project for setting up of new capacity with non-ODS technology has been approved by the Steering Committee set up in the Ministry of Environment and Forests for the clearance of such projects; and (b) the importer furnishes in each case a list of the goods required for the aforesaid projects, which is duly certified, to the effect that the goods mentioned in the said list are required for the aforesaid projects, by an officer not below the rank of a Deputy Secretary in the Ministry of Environment and Forests.
37.	(1) If an officer not below the rank of a Deputy Secretary to the Government of India in the Department of Fertilizers, - (i) certifies that the scheme for renovation or modernisation as the case may be, of the fertilizer plant has been granted techno-economic clearance by the said Department; (ii) recommends, in each case, the grant of exemption under this notification to, - (a) Machinery, instruments, apparatus and appliances, as well as components (whether finished or not) or raw materials for the manufacture of aforesaid items and their components, required for renovation or modernisation of a fertilizer plant; and (b) spare parts, other raw materials (including semi-finished material) or consumable stores, essential for maintenance of the fertilizer plant mentioned above (hereinafter referred to as the said goods) for such scheme; and (iii) certifies in each case, that the said goods are, or will be, required for the purposes specified above; (2) the value of import of the goods specified in sub-clause (b) of clause (ii) of sub-condition (1) shall not exceed 10% of the value of imported goods specified in sub-clause (a) of the said clause; (3) if the importer furnishes an undertaking to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, to the effect that the said goods shall be used for the purposes specified above and in the event of his failure to use the goods for such purposes, he shall pay an amount equal to the difference between the duty leviable on the said imported goods but for the exemption under this notification and that already paid at the time of importation.
38.	Omitted
39.	If, at the time of importation, the importer produces a certificate, from an officer not below the rank of a Deputy Secretary to the Government of India in the Ministry of Environment and Forests, to the effect that the imported kits or parts thereof are required for the conversion of motor-spirit or diesel driven vehicles into Compressed Natural Gas driven vehicles, or Propane driven vehicles, or Liquefied Petroleum Gas driven vehicles, as the case may be.
40.	If, - (a) the goods are imported by - (i) the Ministry of Surface Transport, or (ii) a person who has been awarded a contract for the construction of roads in India by or on behalf of the Ministry of Surface Transport, by the National Highway Authority of India, by the Public Works Department of a State Government or by a road construction corporation under the control of the Government of a State or Union Territory; or (iii) a person who has been named as a sub-contractor in the contract referred to in (ii) above for the construction of roads in India by or on behalf of the Ministry of Surface Transport, by the National Highway Authority of India, by Public Works Department of a State Government or by a road construction corporation under the control of the Government of a State or Union Territory; (b) the importer, at the time of importation, furnishes an undertaking to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, to the effect that he shall use the imported goods exclusively for the construction of roads and that he shall not sell or otherwise dispose of the said goods, in any manner, for a period of five years from the date of their importation; and (c) in case of goods of serial no.12 and 13 of List 18, the importer, at the time of importation of such goods, also produces to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, a certificate from an officer not below the rank of a Deputy Secretary to the Government of India in the Ministry of Surface Transport (Roads Wing), or an officer not below the rank of Chief Engineer of the National Highways Authority of India, to the effect that the imported goods are required for construction of roads in India.
41	If, - (a) the importer, at the time of importation, furnishes an undertaking to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, to the effect that he shall use the imported goods exclusively for the development of Ports and that he shall not sell or otherwise dispose of the said goods, in any manner, for a period of five years from the date of their importation; and (b) the importer, at the time of importation of such goods, also produces to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, a certificate from an officer not below the rank of a Deputy Secretary to the Government of India in the Ministry of Shipping, to the effect that the imported goods are required for development of Ports in India.
41A	If, - (a) the importer, at the time of importation, furnishes an undertaking to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, to the effect that he shall use the imported goods exclusively for Inland Waterways and that he shall not sell or otherwise dispose of the said goods, in any manner, for a period of five years from the date of their importation; and (b) the importer, at the time of importation of such goods, also produces to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, a certificate from an officer not below the rank of a Deputy Secretary to the Government of India in the Ministry of Shipping, to the effect that the imported goods are required for use in Inland Waterways.
42.	If, - (a) the importer, at the time of importation, furnishes an undertaking to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, to the effect that he shall use the imported goods exclusively for the development of Airports and that he shall not sell or otherwise dispose of the said goods, in any manner, for a period of five years from the date of their importation; and (b) the importer, at the time of importation of such goods, also produces to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, a certificate from an officer not below the rank of a Deputy Secretary to the Government of India in the Ministry of Civil Aviation, to the effect that the imported goods are required for development of Airports in India.
43.	Omitted
44.	Omitted
45.	If, - (i) in the case of a power plant (except a nuclear power plant), - (a) in the case of Central Power Sector Undertakings, the Chairman of the concerned Undertaking or an officer authorized by him certifies that the scheme for renovation or modernisation as the case may be, of such power plant, has been approved and an officer not below the rank of a Deputy Secretary to the Government of India in the Ministry of Power recommends, in each case, the grant of the aforesaid exemption to the goods for such scheme; (b) in other cases, an officer not below the rank of the Chief Engineer of the concerned State Electricity Board or State Power Utility certifies that the scheme for renovation or modernisation, as the case may be, of such power plant, has been approved and an officer not below the rank of a Secretary in the State Government concerned dealing with the subject of power or electricity recommends, in each case, the grant of the aforesaid exemption to the goods for such scheme; (ii) in the case of nuclear power plant, an officer not below the rank of a Deputy Secretary to the Government of India in the Department of Atomic Energy certifies the scheme for renovation or modernisation as the case may be, of such power plant, has been approved and recommends the grant of the aforesaid exemption to the goods for such scheme; and (iii) in all cases, the importer furnishes an undertaking to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, to the effect that the said goods shall be used for the purpose specified above and in the event of his failure to use the goods for the renovation or modernisation of the said power generation plant, he shall pay an amount equal to the difference between the duty leviable on the said imported goods but for the exemption under this notification and that already paid at the time of importation.
46.	If, - (a) in the case of small hydel power generation plants upto 3 MW station capacity, an officer not below the rank of a Deputy Secretary to the Government of India in the Ministry of Non- Conventional Energy Sources certifies the quantity, description and technical specifications of raw materials and parts required to be imported for the manufacture and supply of machinery and equipment to the said hydel power generation plant and recommends the grant of this exemption to the imported goods; (b) in the case of nuclear power generation plant, an officer not below the rank of a Deputy Secretary to the Government of India in the Department of Atomic Energy certifies the quantity, description and technical specifications of raw materials and parts required to be imported for the manufacture and supply of machinery and equipment to the said power generation plant and recommends the grant of this exemption to the imported goods; (c) in the case of power generation plants (except those specified above), - (i) in the case of Central Power Sector Undertakings, the Chairman of the concerned Undertaking or an officer authorized by him certifies the quantity, description and technical specifications of raw materials and parts required to be imported for the manufacture and supply of machinery and equipment to the said power generation plant and an officer not below the rank of a Deputy Secretary to the Government of India in the Ministry of Power recommends, in each case, the grant of the aforesaid exemption to the goods for such scheme; (ii) in other cases, an officer not below the rank of the Chief Engineer of the concerned State Electricity Board or State Power Utility certifies the quantity, description and technical specifications of raw materials and parts required to be imported for the manufacture and supply of machinery and equipment to the said power generation plant and an officer not below the rank of a Secretary in the State Government concerned dealing with the subject of power or electricity recommends, in each case, the grant of the aforesaid exemption to the goods for such scheme; and (iii) in all cases, the importer furnishes an undertaking to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, to the effect that the imported goods shall be used for the purpose specified above and in the event of his failure to use the goods for the purpose specified, he shall pay an amount equal to the difference between the duty leviable on the said imported goods but for the exemption under this notification and that already paid at the time of importation.
47.	If imported by a person licensed by the Department of Telecommunications of the Government of India for the purpose of providing basic telephone service, cellular mobile telephone service, value added services via V-SAT system or Internet Service
48.	If imported by a person licensed by the Department of Telecommunications of the Government of India for the purpose of providing radio-paging service.
49.	If imported by a person licensed by the Department of Telecommunications of the Government of India for the purpose of providing Public Mobile Radio Trunked Service (PMRTS).
50.	If the importer produces to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, at the time and place of importation, - (i) a certificate issued by an officer not below the rank of a Deputy Principal Information Officer in the Press Information Bureau in the Ministry of Information and Broadcasting to the effect that the importer is an accredited news agency; and (ii) an undertaking to the effect that the imported goods shall remain in the possession, control and use of the agency and shall not be sold or parted with for a period of five years from the date of importation.
51.	(i) If the importer produces a certificate from an officer not below the rank of a Deputy Principal Information Officer in the Press Information Bureau in the Ministry of Information and Broadcasting to the effect that the importer is an accredited press cameraman, and that the importer has not availed, on any occasion in the previous two years, exemption under this notification or the notification of the Government of India in the Ministry of Finance (Department of Revenue), No. 16/2000- Customs, dated the 1st March, 2000 or No. 17/2001-Customs, dated the 1^st March, 2001; (ii) the exemption under this notification shall be applicable to that portion of C.I.F. value of the specified cameras, lenses and other goods, which does not exceed one lakh rupees; and (iii) if the importer gives an undertaking to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, at the time and place of importation to the effect that the said goods shall remain in his possession, control and use and shall not be sold or parted with for a period of two years from the date of importation.
52.	(i) If the importer produces a certificate from an officer not below the rank of a Deputy Principal Information Officer in the Press Information Bureau in the Ministry of Information and Broadcasting to the effect that the importer is an accredited journalist, and that the importer has not availed, on any occasion in the previous two years, exemption under this notification or the notification of the Government of India in the Ministry of Finance (Department of Revenue), No. 16/2000-Customs, dated the 1^st March, 2000 or No. 17/2001-Customs, dated the 1^st March, 2001; (ii) the exemption under this notification shall be applicable to that portion of C.I.F. value of the specified personal computers, typewriters and fax machines, which does not exceed one lakh rupees; and (iii) if the importer gives an undertaking to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, at the time and place of importation to the effect that the said goods shall remain in his possession, control and use and shall not be sold or parted with for a period of two years from the date of importation.
53.	(i) If, - (a) the goods are imported for Research and Development purposes; (b) the imported goods are installed in the said Research and Development Wing of the importer within six months from the date of importation and certificate from the jurisdictional Assistant Commissioner of Central Excise or the Deputy Commissioner of Central Excise, as the case may be, is produced before the Assistant Commissioner of Customs or the Deputy Commissioner of Customs, as the case may be, at the Port of importation; and (c) the goods imported are not transferred or sold for a period of seven years from the date of installation; (ii) If, - (a) the goods are imported for use in the manufacture of commodities; (b) the total value of goods imported does not exceed 25 per cent. of the FOB value of exports made during the preceding financial year; (c) the importer produces a certificate from the Joint Director General of Foreign Trade in the Ministry of Commerce of the Government of India, certifying the value of exports made during the financial year mentioned in clause (b) above, and also the value and quantity of goods already imported under this notification during the current financial year; (d) the imported goods are installed in the factory of the importer within six months from the date of importation and certificate from the jurisdictional Assistant Commissioner of Central Excise or the Deputy Commissioner of Central Excise, as the case may be, is produced before the Assistant Commissioner of Customs or the Deputy Commissioner of Customs, as the case may be, at the Port of importation; (e) the goods imported are not transferred or sold for a period of 7 years from the date of installation.
54.	If, - (A) imported by a State Fisheries Corporation or any Fisheries Co-operative Federation recognised by the State Government; or (B) imported by a person other than a State Fisheries Corporation or any Fisheries Co-operative Federation recognised by the State Government concerned, - (i) the importer produces a certificate, from an officer not below the rank of a Deputy Secretary of the Department concerned with fisheries in the State Government, to the effect that the spares are being imported with outboard motors meant for fitment to boats which are exclusively used for fishing operations and that such spares are for the purpose of maintenance of the said outboard motors and recommending the grant of the concession; and (ii) the importer furnishes an undertaking to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, at the time of importation to the effect that � (a) the said spares shall be used for the purpose specified above; and (b) he shall pay on demand in the event of his failure to comply with (a) above an amount equal to the difference between the duty leviable on the said spares but for the exemption under this notification and that already paid at the time of importation.
55.	If imported by any State Fisheries Corporation or any Fisheries Co-operative Federation recognised by the State Government concerned.
56.	If, - (1) the spinnerettes acquired in exchange, are imported, within one year of the date of exportation of spinnerettes out of India; and (2) no drawback of duty has been paid on the occasion of their export. *Explanation:* On the imports referred to in condition (1) above, the duty would be leviable as if the value of the said spinnerettes were equal to- (i) the cost of such exchange, that is to say, the aggregate of � (a) labour charges; (b) price charged for that quantity of gold, platinum and rhodium, if any, which is in excess of the respective quantity of gold, platinum or rhodium contained in the said spinnerettes exported out of India; and (c) any other charges paid by the importer to the supplier of such spinnerettes for such exchange of spinnerettes; and (ii) the insurance and freight charges, both ways.
57.	If, - (1) the bushings acquired in exchange, are imported, within one year of the date of exportation of bushings out of India; and (2) no drawback of duty has been paid on the occasion of their export. *Explanation:* On the imports referred to in condition (1) above, the duty would be leviable as if the value of the said bushings were equal to - (i) the cost of such exchange, that is to say, the aggregate of- (a) labour charges; (b) price charged for that quantity of platinum and rhodium, if any, which is in excess of the respective quantity of the platinum and rhodium contained in the said bushings exported out of India; and (c) any other charges paid by the importer to the supplier of such bushings for such exchange of bushings; and (ii) the insurance and freight charges, both ways.
58.	If an accredited representative of the foreign film unit or the television team executes a bond in such form and with such surety as may be acceptable to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, binding himself to pay on demand an amount equal to the duty leviable on such equipment and cameras if the same are not placed under customs control for re-export within a period of three months or such extended period as the said Deputy Commissioner or the Assistant Commissioner may permit, after clearance for home consumption.
59.	If, - (a) the duties of customs leviable on the specified equipment, raw films and tapes had been paid at the time of their first importation into India; (b) no drawback of duty was paid on their exportation from India; (c) the identity of the goods is established to the satisfaction of the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, at the time of availing of this concession; (d) the goods are reimported into India within six months or such period not exceeding one year from the date of their export from India, as may be extended by the said Deputy Commissioner or the Assistant Commissioner on sufficient cause being shown to his satisfaction; and (e) the External Publicity Division of the Ministry of External Affairs certifies that the purpose for which the goods had been exported from India was in public interest and had been sponsored or approved by the Government of India.
60.	If, - (a) the total C.I.F. value of the wireless apparatus, accessories and parts, imported under this notification does not exceed seventy-five thousand rupees; (b) the total value of the parts imported under this exemption does not exceed Rs.1,000; (c) the importer, i.e. the Licensed amateur radio operator, at the time of clearance, produces a certificate from an officer not below the rank of an Assistant Wireless Adviser to the Government of India in the Ministry of Communications to the effect that the wireless apparatus, accessories and parts in respect of which this exemption is claimed are within the value limit specified above, and also recommending the grant of this exemption. *Explanation:* �Licensed amateur radio operator,� means a person duly authorised under the Indian Wireless Telegraphs (Amateur Service) Rules, 1978, made under sections 4 and 7 of the Indian Telegraph Act, 1885 (13 of 1885).
61.	Omitted
62.	If the importer, at the time of importation furnishes an undertaking to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, to the effect that, - (a) the imported goods shall be used for the specified purposes and shall not be sold or otherwise disposed of in any manner for a period of at least two years from the date of importation; and (b) in the event of failure to comply with (a) above, he shall be liable to pay an amount equal to the difference between the duty leviable on the imported goods but for the exemption under this notification and that already paid at the time of importation.
63.	If, - (1) the goods are imported for being tested in � (a) Defence Research and Development Organisation (DRDO) laboratories; (b) Indian Institutes of Technology; (c) Council for Scientific and Industrial Research (CSIR) laboratories; (d) Central Power Research Institute, Bangalore; or (e) Any other test centre approved by any Ministry in the Government of India for this purpose; and (2) the Head of the organisation certifies that the goods have been imported by that organisation only for the purpose of testing and shall not be used or sold after such testing.
64.	If, - (a) the goods are imported by a newspaper establishment registered with the Registrar of Newspapers for India appointed under section 19A of the Press and Registration of Books Act, 1867 (25 of 1867); and (b) the importer at the time of import produces before the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, - (1) a certificate issued by the Registrar of Newspapers for India recommending the grant of exemption under this notification; and (2) an undertaking to the effect that the imported goods shall remain in his possession, control and use and shall not be sold or parted with for a period of five years from the date of importation and in case the said goods are sold thereafter, the sale shall be subject to the permission granted by the Registrar of Newspapers for India.
65.	If, in the case of imports, - (1) for the Teleteach or Margdarshan Programme, the Managing Director of M/s Electronic Trade and Technology Development Corporation Limited, certifies that the said cassettes and tapes are predominantly educational in character and the importer furnishes an undertaking to the effect that - (i) the certificate from the Central Board of Film Certification in the Form below, shall be produced within a period of three months or such extended period as the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, may allow; and (ii) he shall pay, on demand, in the event of his failure to comply with clause (i) above, an amount equal to the difference between the duty leviable on such quantity of said cassettes and tapes but for the exemption under this notification and that already paid at the time of importation; or (2) made by the Television Centre of All India Radio, the Director of the said Centre at New Delhi in the said Form, and in other cases, the Central Board of Film Certification, certifies in each case, that the video cassettes and video tapes in respect of which exemption is claimed are predominantly educational in character. FORM Certificate No....��. of �...��.. (year) This is to certify that the parcel containing the following videocassettes and videotapes was delivered to Shri....��.. Regional Officer / Assistant Regional Officer, CBFC at Mumbai / Kolkata / Chennai / the Director of the Television Centre of All India Radio, New Delhi, who examined the seals and identified the video cassettes and video tapes according to the particulars certified at the time of Customs examination, and that the Board / Director is satisfied that the video cassettes and video tapes are predominantly educational in character. Particulars of cassette/ tape and film recorded thereon: Particulars of the producer: Length of Cassette/ Tape: Name of the importer: Date: Signature of Regional Officer/ Assistant Regional Officer/ Director, Television Centre, AIR, New Delhi
66.	If the importer, at the time and place of clearance, - (a) produces a certificate from an officer not below the rank of a Deputy Secretary to the Government of India in the Ministry of Human Resource Development, Department of Education, to the effect that the imported recorded magnetic tapes and floppy diskettes are recorded with educational or scientific material for use in computers and are required by Institutes or Research Centres duly approved by the University Grants Commission; (b) gives an undertaking to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, to the effect that such imported goods shall not be- (i) used for any other purpose and shall not be subsequently recorded with any other material; and (ii) sold or parted with, without the prior permission of the Commissioner of Customs of the port of importation.
67.	If the parts are required for manufacture or servicing of aeroplanes, gliders, helicopters or simulators of aircraft. *Explanation:* �Parts of aeroplanes, gliders, helicopters or simulators of aircraft� shall include engines, engine parts, wireless transmission apparatus, wireless receivers, iron and steel washers and screws, ball and roller bearings and other parts.
68.	If an officer not below the rank of a Deputy Secretary to the Government of India in the Ministry of Civil Aviation certifies in each case the description and quantity of such raw materials, which are required for the manufacture, or servicing of the specified aircraft or parts of such aircraft, as the case may be.
69.	If the importer, at the time of import � (i) produces before the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, a certificate from an officer not below the rank of a Deputy Secretary to the Government of India in the Department of Space certifying that the said satellites and pay-loads are for launch by Indian launch vehicles from Indian soil into Outer Space in conformity with the provisions of the Outer Space Treaty of 1967; and (ii) gives an undertaking to the effect that the ground equipment imported for testing the satellites or pay-loads shall be re-exported within a period of six months from the date of their importation or such extended period as the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, may allow, and in the event of failure to comply with the same, he shall pay on demand an amount equal to the difference between the duty leviable on such goods but for the exemption under this notification and that already paid at the time of importation.
70	If, - (a) the importer makes a declaration at the time of import that the barges would be re-exported; (b) the barges are re-exported, by the same ship which brought them or by any other ship under the same shipping agency, within two months of the date of importation or such extended period as the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, may allow; and (c) the importer executes a bond, in such form and for such sum as may be specified by the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, binding himself to pay that sum if the re-export does not take place within the period specified under condition (b) above.
�71	If, - (a) the importer maintains a proper account of import, use and consumption of the specified goods imported for the purpose of repairs of ocean-going vessels and submits such account periodically to the Commissioner of Customs in such form and in such manner as may be specified by the said Commissioner; (b) the importer, by the execution of bond, in such form and for such sum as may be specified by the said Commissioner, binds himself to pay on demand an amount equal to the duty leviable, - (i) on the capital goods or spares thereof or material handling equipment, as are not proved to the satisfaction of the said Commissioner to have been installed or otherwise used for the aforesaid purpose; (ii) on parts, raw material and consumables, as are not proved to the satisfaction of the said Commissioner to have been used or consumed for the aforesaid purpose, within a period of three months from the date of importation thereof or within such extended period as that Commissioner, on being satisfied that there is sufficient cause for not installing, using or consuming them, as the case may be, for the aforesaid purpose within the said period, allow. *Explanation.* � �Ocean going vessels� includes- (a) liners; cargo-vessel of various kinds including refrigerator vessels for the transport of meat, fruit or the like, vessels specified for the transport of particular goods (grain, coal, ores or the like); tankers (petrol, wine or the like); yachts and other sailing vessels; cable ships; ice-breakers; floating factories of all kinds (for processing whales, preserving fish or the like) whale catchers; trawlers and other fishing vessels; life boats, scientific research vessels; weather ships; vessels for the transportation or mooring of buoys; pilot-boats; hopper barges for the disposal of dredged material or the like; (b) war ships of all kinds including submarines; (c) tugs, dredgers, fire- floats and salvage ships; and (d) Oil rigs, drilling ships and jack-up rigs.
�72	If the vessels and other floating structures are intended to be broken up after their importation, the importer shall present a fresh bill of entry to the Commissioner of Customs, and thereupon such goods shall be chargeable with the duty which would be payable on such goods as if they were entered for home consumption, under section 46 of the Customs Act, 1962 (52 of 1962), on the date of the presentation of such fresh bill of entry, for the purposes of break-up of such goods.
�73	If any of the goods manufactured from the imported raw materials and parts are subsequently intended to be broken up, a fresh bill of entry in respect of such manufactured goods shall be presented to the Commissioner of Customs and thereupon these goods shall be chargeable with the duty which would be payable as if such manufactured goods had been imported and entered for home consumption, under section 46 of the Customs Act, 1962 (52 of 1962), on the date of the presentation of such fresh bill of entry, for the purposes of break-up of such manufactured goods.
74.	If, - (a) imported by any Department or Ministry of the Government of India; and (b) the importer produces a certificate from an officer not below the rank of a Joint Secretary to the Government of India in the concerned Department or Ministry, certifying that the said goods are being imported under an agreement relating to Government-to-Government Assistance Programme with any other country.
75.	Omitted
76.	If, at the time of importation, the importer produces a certificate, from an officer not below the rank of a Deputy Secretary to the Government of India in the Department of Science and Technology or an officer not below the rank of a Joint Secretary to the concerned State Government in the Department of Science and Technology to the effect that imported equipment, parts or accessories are required for initial setting up, repair or maintenance of a planetarium.
77.	If, - (a) the hospital is run by - (1) the Central Government, a State Government, a Union Territory Administration or a Local Authority; or (2) institutions established by or under any law for the time being in force; or (3) societies registered under any law for the time being in force relating to registration of societies, such societies being controlled by any of the authorities mentioned in (1) above; (b) the importer produces a certificate, from the Directorate General of Health Services of the Government of India or the Ministry of Health and Family Welfare in the Government of India, or from the State Government, the Union Territory Administration or the Local Authority running or controlling that hospital, as the case may be, to the effect that the said hospital falls in any of the categories specified at (a) above; and (c) the head of the hospital certifies in each case that the hospital equipment is meant for use in the hospital and is essential for running or maintenance of the hospital. *Explanation:* �Hospital� includes any Institution, Centre, Trust, Society, Association, Laboratory, Clinic and Maternity Home, which renders medical, surgical or diagnostic treatment.
78.	If the importer at the time of importation, - (a) produces a certificate from the Director General or Deputy Director General or Assistant Director General, Health Services, New Delhi, in each case, in the Form below; or (b) furnishes an undertaking acceptable to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, to the effect that the aforesaid certificate shall be produced before the said Deputy Commissioner or the Assistant Commissioner within the period specified by the said Deputy Commissioner or the Assistant Commissioner, failing which he would pay the duty leviable thereon. FORM Certificate No....��. of �...��.. (year) Certified that the medical equipment/ accessory/ spare part........................ (name to be specified) being imported by................�� is a life saving medical equipment, accessory or spare part and exemption from payment of customs duty is recommended. Signature with date of Director General/ Deputy Director General/ Assistant Director General, Health Services, New Delhi
79.	If the importer produces to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, at the time of importation, a certificate from the Civil Surgeon or the District Medical Officer or the Administrative Medical Officer or the Director of Health Services of the concerned State or a Specialist in the concerned speciality attached to a Government Hospital or a recognised medical college to the effect that the importer suffers from the particular handicap or disability and that the imported goods in respect of which the exemption is claimed are essential to overcome or reduce the said handicap or disability.
80.	Omitted
81.	If, - (a) where the importer is the Government of India or a person authorised by that Government, or the goods are shipped on the order of a Department of that Government and are appropriated under such order at the time of shipment, for use in anti-smuggling operations, he produces, at the time of importation, a certificate from the Under Secretary to the Government of India in the Department of Revenue to the effect that the said goods are intended for the aforesaid use; (b) where the importer is a Police Force of a State or a Union Territory or the Central Reserve Police Force, the National Security Guard or the Special Protection Group and the said goods are imported for bomb detection or disposal purposes, he produces, at the time of importation, a certificate from an officer in the Ministry of Home Affairs not below the rank of an Under Secretary to the Government of India to the effect that the said goods are intended for the aforesaid use.
82.	If the goods are imported by the Sports Authority of India or a National or State level Sports Federation or Association recognised by the Central Government or a State Government or a Union Territory Administration, as the case may be.
83.	If, - (a) the synthetic tracks and artificial surfaces and equipment required for their installation are imported under the �Scheme for Laying Synthetic Tracks and Artificial Surfaces� of the Department of Youth Affairs and Sports, Government of India; (b) the importer, at the time of import - (1) produces before the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, a certificate from an officer not below the rank of a Deputy Secretary to the Government of India in the said Department certifying that the import of the said tracks and surfaces is under the �Scheme for Laying Synthetic Tracks and Artificial Surfaces� and also recommending the grant of the exemption; and (2) gives an undertaking to the effect that the equipment imported for installation of the said tracks and surfaces shall be re-exported within a period of six months from the date of importation, and in the event of failure to comply with the same he shall pay on demand an amount equal to the difference between the duty leviable on such goods but for the exemption under this notification and that already paid at the time of importation.
84.	If, - (a) the goods are imported into India by a National Sports Federation, under a certificate issued by the Sports Authority of India or imported by the Sports Authority of India, for use in a national or international championship or competition, to be held in India or abroad; and (b) the importer, at the time of clearance of the goods, produces a certificate to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, from an officer not below the rank of a Director in the Sports Authority of India certifying - (i) the name and address of the importer of the goods and the description, quantity and value of the goods, and (ii) that the goods are required for the purpose specified at (a) above.
85.	If certified by the apex body in relation to the concerned game or sport (i.e. the highest organisation, other than Government, by which the game or sport is controlled or regulated), or the Sports Authority of the concerned State, that the requisites for games and sports are required to be used in a national or international championship or competition to be held in India or abroad.
86	(a) If an officer not below the rank of a Joint Secretary to the Government of India in the Ministry of Power certifies that - (i) the power purchasing State has constituted the Regulatory Commission with full powers to fix tariffs; (ii) the power purchasing State undertakes, in principle, to privatise distribution in all cities, in that State, each of which has a population of more than one million, within a period to be fixed by the Ministry of Power; and (iii) the power purchasing State has agreed to provide recourse to that State�s share of Central Plan allocations and other devolutions towards discharge of any outstanding payment in respect of purchase of power; (b) In the case of imports by a Central Public Sector Undertaking, the quantity, total value, description and specifications of the imported goods are certified by the Chairman and Managing Director of the said Central Public Sector Undertaking; and�� (c) In the case of imports by a Private Sector Project, the quantity, total value, description and specifications of the imported goods are certified by the Chief Executive Officer of such project.
87.	(a) In the case of imports by the constituent units of the Department of Atomic Energy, the quantity, total value, description and specifications of the imported goods are certified by an officer not below the rank of a Joint Secretary to the Government of India in the Department of Atomic Energy; (b) In the case of imports by a Central Public Sector Undertaking, the quantity, total value, description and specifications of the imported goods are certified by the Chairman and Managing Director of the said Central Public Sector Undertaking;
88	If a certificate from the Indian Mission concerned, about the ownership of the goods by the deceased person, is produced at the time of clearance of the goods through Customs station.
89	If the imported goods are meant to be exhibited in a museum managed by - (a) the Archaeological Survey of India, such goods shall be imported under cover of a certificate issued by the Director General of Archaeology in India; or (b) a State Government, such goods shall be imported under cover of a certificate issued by the concerned Authority in the concerned State Government.
90	If, at the time of importation, the importer produces to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, a certificate from the Licensing Authority to the effect that specified quantity of such drugs and materials are required for being used in a clinical trial for which permission has been granted by the Licensing Authority under the provisions of the Drugs and Cosmetics Rules, 1945.
91	If, - (i) (a) in the case of Central Power Sector Undertakings, the Chairman of the concerned Undertaking or an officer authorized by him certifies that the power transmission project has been approved and an officer not below the rank of the Deputy Secretary to the Government of India in the Ministry of Power recommends, in each case, the grant of the aforesaid exemption to the goods for such project; (b) in other cases, an officer not below the rank of the Chief Engineer of the concerned Power Transmission Board or Corporation in a State certifies that such power transmission project has been approved and an officer not below the rank of the Secretary in a State Government concerned dealing with the subject of power or electricity recommends, in each case, the grant of the aforesaid exemption to the goods for such project; (ii) in all cases, the importer furnishes an undertaking to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, to the effect that the said goods shall be used for the purpose specified above and in the event of his failure to use the goods for power transmission, he shall pay an amount equal to the difference between the duty leviable on the said imported goods but for the exemption under this notification and that already paid at the time of importation.

List 1 (See S. No. 52 of the Table)

(1) Amprolium Hydrochloride

(2) Ascorbyl Dipotassium 2 Sulphate Dihydrate

(3) Ascorbyl Polyphosphate

(4) Avilamycin

(5) Avoparcin

(6) Bovine Albumin Fraction

(7) Bovine Somatotropin

(8) Buparvaquone

(9) Calf Serum/Foetal Calf Serum

(10) Dulbecco Phosphate Buffer Saline Medium

(11) Flavophospholipol

(12) Follicular Stimulating Hormone (FSH)

(13) Gonadotropin Releasing Hormone (Gnrh)

(14) Halofuginone Bromide��

(15) Human Chorionic Gonadotropin Hormone (HCG)

(16) Ivermectin

(17) Lasolacid Sodium

(18) Leutinising Hormone

(19) Lincomycin Powder

(20) Lincospectin (Bulk Drug Lincomycin Spectinomycin 1:2)

(21) Maduramicin Ammonium/ Haduramycin Ammonium

(22) Monensin Granulated (Coban Premix)

(23) Ovaprim [Gonadotropin Releasing Hormones] (Gnrh) Analogue With Domperidone

(24) Pleuromutilin

(25) Pregnant Mare Serum (PMSG)

(26) Prostaglandin F2 Alpha

(27) Prostaglandin

(28) Prostaglandins (Pgf2 Alpha)

(29) Robenidin Hcl

(30) Salinomycin 12%

(31) Tiamulin Hydrogen Fumarate

(32) Tiamulin Hydrochloride

(33) Tylan Premix

(34) Tylosin Tartarate/ Tylosin Phosphate

(35) Vaccine For Fish

(36) Virginiamycin

(37) 4-Hexyl Resorcinol

List 2 (See S. No 75 of the Table)

1. 120 MW Combined Cycle Gas Turbine Power Plant at Basin Bridge, Chennai, of Tamil Nadu Electricity Board;

2. 20 MW Power Plant of M/s Nagarjuna Electric Generating Company at Patancheru, Medak District, Andhra Pradesh;

3. 515 MW Combined Cycle Power Plant at Hazira, Gujarat of M/s Essar Power Limited;

4. 167 MW Combined Cycle Power Plant at Vadodara of M/s Gujarat Industries Power Corporation Limited;

5. 48 MW Combined Cycle Power Plant at Sancoale village, Mormugao District, Goa, of M/s Reliance Salgaoncar Company Limited;

6. 220 MW Barge Mounted Power Plant at Mangalore of M/s Tanir Bavi Power Company Private Limited, Bangalore;

7. 165 MW Combined Cycle Power Plant at Eloor, District Ernakulam, Kerala of M/s BSES Kerala Power Limited.

8. 413 MW Combined Cycle Gas Turbine Power Plant at Anta GPP, Rajasthan of the National Thermal Power Corporation Ltd;

9. 652 MW Combined Cycle Gas Turbine Power Plant at Auraiya GPP, Uttar Pradesh of the National Thermal Power Corporation Ltd;

10. 430 MW Combined Cycle Gas Turbine Power Plant at Faridabad GPP, Haryana of the National Thermal Power Corporation Ltd;

11. 645 MW Combined Cycle Gas Turbine Power Plant at Kawas GPP, Gujarat of the National Thermal Power Corporation Ltd;

12. 350 MW Combined Cycle Gas Turbine Power Plant at Kayamkulam GPP, Kerala of the National Thermal Power Corporation Ltd.

List 3 (See S. No 80 of Table)

(1) Allopurinol

(2) Amikacin

(3) Amiodarone

(4) Amphotericin-B

(5) Amrinone

(6) Amifostine

(7) Aprotinin

(8) Atracurium Besylate

(9) Baclofen

(10) Bleomycin

(11) Busulphan

(12) BCG Vaccine, Iopromide, Iotrolan

(13) Carbidopa With Levodopa

(14) Cefoperazone

(15) Ceftizoxime

(16) Chlorambucil

(17) Chorionic Gonadotrophin

(18) Clindamycin

(19) Cyclophosphamide

(20) Cefpirome

(21) Dactinomycin

(22) Dacarbazine

(23) Daunorubicin

(24) Desmopressin

(25) Desferrioxamine

(26) Dimercaprol

(27) Dobutamine

(28) Dispyramide Phosphate

(29) Dopamine

(30) Disodium Pamidronate

(31) Eptifibatide

(32) Gemcitabine

(33) Glucagon

(34) Hydroxyurea

(35) Ifosfamide

(36) Isoprenaline

(37) Interferon Alpha - 2b/Interferon Alpha- 2a/Interferon Nl/ Interferon Alpha Nl (Lns)

(38) Isoflurane

(39) Ketamine

(40) Lactulose

(41) Levodopa (L-Dopa)

(42) Lomustine

(43) Lamivudine

(44) Letrozole

(45) Leuprolide Acetate

(46) Latanoprost

(47) Melphalan

(48) Mercaptopurine

(49) Mesna

(50) Methotrexate

(51) Methyl Prednisolone

(52) Mitomycin

(53) Mmr (Measles, Mumps And Rubella) Vaccine

(54) Mustin Hydrochloride

(55) Netilmicin

(56) Naloxone

(57) Nitroglycerine

(58) Natural Micronised Progesterone

(59) Octreotide

(60) Pancuronium Bromide

(61) Pilocarpine

(62) Podophyllotoxin

(63) Piperacillin

(64) Praziquantel

(65) Pralidoxime

(66) Prazosin

(67) Protamine

(68) Quinidine

(69) Sodium Cromoglycate Spincaps And Cartridges

(70) Sodium Hyalauronate Sterile 1% And 1.4% Solution

(71) Somatostatin

(72) Somatropin

(73) Streptokinase And Streptodomase Preparations

(74) Strontium Chloride (85 Sr.)

(75) Thioguanine

(76) Tobramycin

(77) Tissue Plasminogen Activator

(78) Tetanus Immunoglobin

(79) Typhoid Vaccines :

(I) Vi Antigen Of Salmonella Typhi, And

(Ii) Ty 2la Cells And Attenuated Non-Pathogenic Strains Of S. Typhi

(80) Tretinoin

(81) Tribavirin/Ribavirin

(82) Urokinase

(83) Ursodeoxycholic Acid

(84) Vancomycin

(85) Vasopressin

(86) Vecuronium Bromide

(87) Zidovudine

(88) 5-Fluorouracil

(89) Pegulated Liposomal Doxorubicin Hydrochloride injection

(90) Ketoanalogue preparation of essential amino acids

(91) Recombinant human Erythropoietin

(92) Pergolide

(93) Kit for bedside assay of Troponin-T

(94) University of Wisconsin Solution for storing, transporting, flushing donor organs for transplant

(95) Lopinavir plus Ritonavir (co-formulation of Lopinavir and Ritonavir)

(96) Miltefosine

(97) Milrinone Lactate

(98) Methoxy Isobutile Isonitrile (MIBI)

(99) Haemophilus Influenzae Type b Vaccine

(100) Mycophenolate Sodium

(101) Verteporfin

List 4 (See S. No. 83 and 403 of the Table)

(1) Abciximab

(2) Aurothiomalate Sodium

(3) Asparaginase

(4) Agglutinating Sera

(5) Anti-Diphtheria Normal Human Immunoglobulin

(6) Anti-Haeomophilic Factor Concentrate (Viii And Ix)

(7) Anti-Human Lymphocyte Immunoglobulin Iv

(8) Anti-Human Thymocyte Immunoglobulin Iv

(9) Anti-Pertussis Normal Human Immunoglobulin

(10) Anti-Plague Serum

(11) Anti-Pseudomonas Normal Human Immunoglobulin

(12) Anti-Rabies Normal Human Immunoglobulin

(13) Anti -D Immunoglobulin

(14) Basiliximab

(15) Beractant Intra-Tracheal Suspension

(16) Blood Group Sera

(17) Botulinum Toxin Type �A�

(18) Burn Therapy Dressing Soaked In Gel

(19) Bovine Thrombin For In Vitro Test For Diagnosis In Haemorrhagic Disorders

(20) Bovine Albumin

(21) Bretyleum Tossylate

(22) Calcium Disodium Edetate��

(23) Carmustine

(24) Cesium Tubes

(25) Calcium Folinate

(26) Cholestyramine

(27) Christmas Factor Concentrate (Coagulation Factor Ix Prothrombin Complex Concentrate)

(28) Cobalt-60

(29) Corticotrophin

(30) Cyanamide

(31) Diagnostic Agent For Detection Of Hepatitis B Antigen

(32) Diagnostic Kits For Detection Of HIV Antibodies

(33) Diphtheria Antitoxin Sera

(34) Diazoxide

(35) Edrophonium

(36) Enzyme Linked Immunoabsorbent Assay Kits [Elisa Kits]

(37) Epirubicin

(38) Fibrinogen

(39) Floxuridine

(40) Follicle Stimulating Hormone [Fsh]

(41) Flucytosin

(42) Filgrastim/ Molgramostim (G- Csf/ Gm-Csf)

(43) Flecainide

(44) Fludarabine Phosphate

(45) Foetal Bovine Serum (Fbs)

(46) Gadolinium Dtpa Dimeglumine

(47) Gallium Citrate

(48) Gasgangrene Anti-Toxin Serum

(49) Goserlin Acetate

(50) Hepatitis B Immunoglobulin

(51) Hexamethylmelamine

(52) Hydralazine

(53) Idarubicine

(54) Idoxuridine

(55) Imatinib Mesilate

(56) Irinotecan

(57) Immunoassay Kit For Blood Fibrinogen Degradation Product For Direct Estimation For Diagnostic Test In D.I.C.

(58) Inactivated Rabies Vaccine [Human Diploid Cell]

(59) Inactivated Rabies Vaccine [Vero-Cell]

(60) Intravenous Amino Acids

(61) Intravenous Fat Emulsion

(62) Iopamidol

(63) Iohexol

(64)

(A) Indium (Iii) In Bleomycin

(B) Indium 113 Sterile Generator And Elution Accessories

(D) Indium 113 In Liver Scanning Kit

(65) Iscador, Clia Diagnostic Kits

(66) Levodopa With Benserazine

(67) Lenograstim

(68) Meningococcoal A And C Combined Vaccine With Diluant Solvent

(69) Methicillin

(70) Metrizamide Inj With Diluant

(71) Monocomponent Insulin

(72) Mycophenolate Mofetil

(73) Nalorphine

(74) Normal Human Plasma

(75) Normal Human Immunoglobulin

(76) Nuclear Magnetic Resonance Contrast Agent

(77) Normal Human Serum Albumin

(78) Penicillamine

(79) Pentamidine

(80) Penicillinase

(81) Poliomyelitis Vaccine (Inactivated And Live)

(82) Potassium Aminobenzoate

(83) Porcine Insulin Zinc Suspension

(84) Prednimustine

(85) Porcine And Bovine Insulin

(86) Procarbazine

(87) Purified Chick Embryo Cell Rabies Vaccine

(88) Pyridostigmine

(89) Pneumocystis Carinii If Kits

(90) Prostaglandin E 1 (Pge1)

(91) Radio-Immunoassay Kit For Hormones (T3, T4, Tsh Insulin, Glucogen, Growth Hormone, Cortisol, L.H., Fsh And Digoxin)

(92) Radioisotope Ti 201

(93)

(A) Rabbit Brains Thromboplastin For Pt Test

(B) Reagent For Pt Tests

(94) Rabies Immunoglobulin Of Equine Origin

(95) Ritonavir

(96) Rivastigmine

(97) Rituximab

(98) Sevoflurane

(99) Saquinavir

(100) Recuronium Bromide

(101) Septopal Beads And Chains

(102) Sodium Arsenate

(103) Freeze Dried Form Of Human Follicle Stimulating And Luteinising Hormones

(104) Solution Of Nucleotides And Nucliosides

(105) Specific Desensitizing Vaccine

(106) Sterile Absorbable Haemostat For Control Of Surgical Vessel Bleeding

(107) Strontium Sr-89 Chloride

(108) Suxamethonium Chloride

(109) Selenium-75

(110) Teicoplanin

(111) Technitium-99m

(112) Tetrofosmin

(113) Ticarcillin

(114) Tranexamic Acid

(115) Tocainide

(116) Tri-Iodothyronine

(117) Triethylene Tetramine

(118) Trastuzumab

(119) Thrombokinase

(120) Teniposide

(121) Trans-1- Diamino Cyclohexane Oxalatoplatinum

(122) Ticarcillin Disodium And Potassium Clavulanate Combination

(123) Vindesin Sulphate

(124) X-Ray Diagnostic Agents, the following: -

(i) Propylidone

(ii) Ethyl Iodophenylun Decylate

(iii) Iodipammide Methyl Glucamine

(iv) Lipidoll Utra Fluid

(v) Patent Blue

(125) Zalcitabine

(126) Zoledronic Acid

List 5 (See S. No. 84 of the Table)

(1) Chlorine

(2) Helium

(3) Silicon Tetra Chloride

(4) Germanium Tetra Chloride

(5) Phosphorous Oxychloride

(6) Sulphur Hexa Fluoride Oxygen

(7) Oligo-Poly Iso Cyanate Ethyl-Acetate Solution

(8) Colouring Ink For Fibre ��

(9) Binder Of Polyurethane Or Vinyl Chloride-Vinyl Acetate Copolymer

(10) UV Resin-1/ UV Resin-2

(11) Nylon-12 Granules / Chips For Sheath / Loose Tube

(12) Coloured Nylon-12

(13) Elongated Polyethylene Tape

(14) Polyester Tape

(15) Nylon Thread ��

(16) Polyethylene Cord

(17) Biaxially Oriented Nylon Tape

(18) Silica Tube / Rod, Other Than Preform

(19) Aramid Yarn

(20) Impregnated Glass Fibre Reinforcement (Glass Rovings)

(21) Rip Cord

(22) Nylon 11

List 6 (See S. No. 84 of the Table)

(1) E-Glass Yarn/ Roving For FRP

(2) UV Resin For FRP

(3) Complex High Molecular Weight Resin In Acrylate Solution For FRP ��

(4) Acrylated Monomers

(5) Photoinitiater

(6) Tert Butyl Perbenzoate��

(7) Zinc Soap Of Long Fatty Acid Mixture

(8) Modified Polypropylene

(9) Ethylene Acrylic Acid (EAA)

List 7 (See S. No. 85 of the Table)

(1)

(A) Laser Rods - Neodymium: YAG, Neodymium : Glass, Ruby, Erbium : YAG, TI : A1203, Alexandrite, HO : YAG

(B) Helium- Neon Laser Tubes

(D) Dielectric Coated Mirrors For Visible, Near IR & 10.6 Micrometer Region

(E) Hard Dielectric Coated Optics Including Thin Film Polarisers, Calcite Polarisers And Beam Splitters

(F) Znse Mirrors, Znse Lenses And Znse Windows

(G) Gratings And Prisms

(H) Dye Cells And Laser Dyes

(I) Thin Film Polarisers For Visible, Near IR Region

(J) Electro- Optic Switches For Visible, Near IR And 10.6 Micrometer Region

(K) Flash Lamps (Xenon, Krypton)

(L) Arc Lamps (Krypton)

(M) Second Harmonic Generation Crystals

(2) Energy Storage Capacitors

(3) Thyratrons

(4) Photodetectors And Photomultipliers

(5) Metering Needle Valves And Pressure Indicators��

(6) Spectroscopic Grade Pure Gases Viz., Xenon, Krypton, Fluorine, Argon

(7) Vaccum Pumps Of Capacity Upto 20 Litres Per Minute

(8) Quartz And Special Glasses

(9) Non Linear Crystals

(10) Electro- Optic And Acousto-Optic Switches

(11) Special Materials, Namely, High Purity Gases, Kovar, Alumina And Zirconia Fibres, Recrystallised Alumina Tubes, Optical Polishing Materials, Optical Cleaning Material, Dyes And Pitch For Optical Polishing

(12) Optical Filters

List 8 (See S. No. 94 of the Table)

(A) Dental equipment, namely: -

(1) Air Motor/ Turbine Hand Piece And Control Box With Foot Control, Micromotors For Dental Applications

(2) Air Rotor/ Turbine Complete With Or Without Air Compressor

(3) Dental Engines, For Laboratory Work Or For Chair Side Clinical Work On Patients

(4) Dental Operating Lights And Fibre Optic Lights

(5) Ultrasonic Dental Cleaning System

(6) Ultrasonic Scalers Of All Types

(7) Spot Welders For Dental Use With Auxiliary Functions, Outlet: - Annealing Jack, Heat-Treat Tables, Auxiliary Cables Or Plug-In Vise

(8) Air Turbine Head/ Cartridges: - Borden Turbines - Regular Cartridge, Borden Turbines-Silencer Cartridge And Quiet Air Turbines - Compact Miniature Standard

(9) Dental Burrs Of All Varieties Of Various Shapes And Sizes - Carbide, Diamond Or Steel, Carbon Burrs With Titanium Coating, Tungsten Burrs

(10) Dental Hand Pieces, For - Air Motor, Air Turbine Or Drilling Engines (Clinical And Laboratory) For Filling, Packing And Condensation Purposes And Micromotors

(11) Endodontic Instruments (Root Canal Instruments), Brosches, Reamers And Files, Fillers / Wideners And Pluggers ��

(12) Anaesthetic Cartridges For Dental Use

(13) Body Contoured Self-Adjusting Electrically Operated Dental Chair

(14) Equipment For Chrome Cobalt Work

�(15) Fibre Optic Light Equipment With Attachments For Dental Work

(16) Porcelain Furnace

(17) Sand Blasting Equipment For Dental Use

(18) Vacuum Investing Equipment For Dental Castings

(19) Developing Tarks For Dental X-Ray (Automatic And Ordinary)

(B) Ophthalmic equipment, namely: -

(1) Projection Magnifier For Contact Lens Inspection And Verification

(2) Radiuscope Base Curve (For Measurement Of Contact Lenses)

(3) Contact Lens Thickness Measuring Gauge

(4) Stereozoom Microscope For Inspection Of Contact Lenses

(5) Softometer For Measurement Of The Base Curve Of Soft Contact Lenses

(6) Contact Lens Lathes

(7) Contact Lens Polishing Machines

(8) Ophthalmic Operating Lights And Fibre Optic Lights

(9) Exophthalmometer

(10) Ophthalmo Dynamometer

(11) Corneal Anesthesiometer

(12) Dark Adaptometer

(13) Glare Testing Equipment

(14) Pantoscope

(15) Cryo-Lathe

(16) Ophthalmic Cryo Equipment

(17) CAM Stimulator

(18) Roper Hall Foreign Body Locator

(C) Other medical equipment, namely: -

(1) High Powered X-Ray Unit More Than 50 KW With Special Attachments For Paediatric Patients, Image Intensifiers, TV System And Cut Film Camera

(2) Automatic Electronic Blood Cell Counter

(3) Multi Channel Recorder For Cardiac Electrophysiology With Computerised Analysis System Including Facilities For Memory ��

(4) Equipment For Computerised Intra-Operative Mapping System

(5) Operating Table- Electro Hydraulic Type

(6) Operating Lamps - Shadow less

(7) Immuno - Fluorescence Microscope With Or Without Attached Photo Micrography Set

(8) Cryostat

(9) Thermodyne ��

(10) Ultramicrotome

(11) Cardio-Tachograph

(12) Intensive Care Servo-Controlled Incubator

(13) Open Infant Care System With Servo Control

(14) Oxygen Analyser

(15) Apnea Monitor

(16) Non-Invasive Continuous BP Monitor

(17) Transcutaneous Oxygen Monitor

(18) �Filter Cartridge� Of �Filter Self Rescuer�

(19) Portable Intermittent Traction Machines

(20) Burn Therapy Dressing Soaked In Protective Gel

(21) Cystoscope And Colposcope

(22) Urological X-Ray Examination Table

(23) Bipolar Angiography Equipment

(24) Electron Microscope

(25) Rotary Microtome

(26) Billirubinmeter

(27) Fluorescent Microscope

(28) Phase Contrast Microscope

(29) Inverted Microscope

(30) Caogulometer

(31) Daree Gromel Illuminator Microscope

(32) Densitometer

(33) Tissue Processor

(34) Paediatric/ Neonatal Laryngoscope

(35) Resuscitator Other Than Compressed Air Breathing Type

(36) O₂ Blenders

(37) Reinforced Corrugated Tubing

(38) Automatic Plasmapheresis Equipment (Blood Cell Separation)

(39) Gas Failure Alarms

(40) Ultrasonic Nebulisers

(41) Heat Nebulisers

(42) Local Analgesic Spray

(43) Non-Re Breathing Valves �

(44) High Pressure, Pulsing, Electronic Controlled Autoclaves

(45) Anaesthesia Apparatus

(46) Hypothermia Machine

(47) Respirometer

(48) Pulmonary Function Test Machines

(49) Capnograph-CO₂ Meter Blood Gas - CO₂ Meter Gas To Gas

(50) Oxygen Blending Mask

(51) Paediatric Anaesthesia Set

(52) Cautery Proof Cardioscopes With Memory

(53) Dosemeter

(54) Polystyrene Phantoms

(55) Water Phantom

(56) Mould Room Equipment (Including Styrofoam Gatter)

(57) Radiation Field Analyser

(58) Survey Equipment (Including Neutron Monitor)

(59) Densitometer For Film Densitometry

(60) TLD (For Internal Dosimetry)

(61) Isotope Calibrator

(62) Whole Body Human Phantom

(63) Angioscope For Coronary Angiography

(64) Doppler Equipment

(65) Xeroradiographic Equipment

(66) Urological X-Ray Examination Unit

(67) Pressure Injector With Rapid Serial Changing Unit

(68) Computerised Tread Mill

(69) Vector Cardiograph

(70) Polygraph

(71) Phonocardiograph And Systolic Time Interval Equipment��

(72) Tonometer

(73) Photo-Coagulator

(74) Lithotome

(75) Extracorporal Lithotriper

(76) Calibrated Thermo Compensated / Thermostabilised Anaesthetic Vapouriser

(77) Foetal Monitor

(78) Bipolar Coagulator And Forceps

(79) Electro-Encephalography Equipment

(80) Doppler Carotid Scanner

(81) Electromyography Equipment And Accessories Thereof

(82) Cryosurgery Equipment

(83) Trans-Cutaneous Nerve Stimulator

(84) Filters For Extra Corporal Circulation

(85) PET Scanner

(86) Operating Microscope For Microsurgery

(87) Operating Instruments For Microsurgery

(88) Cardio-Vascular Catheterisation Lab Equipment

(89) Automatic / Laser Multi Image And Multi Format Cameras

(90) Bedside Arrythmia Analyser / Monitor

(91) High Pressure Contrast Medium Injector

(92) Thermal Printers, Black/White For Medical Use

(93) Thermal Printers, Colour For Medical Use

(94) Optical Disc Recorders For Medical Image Storage

(95) Multichannel Patient Monitoring System Upto Three Channels Provided - (A) System Has Plug-In Module Option For Any Three Parameters Out Of ECG, Respiration, BP, Pulse And Temperature Or (B) System Has Monitoring Options For Any Three Parameters Out Of ECG, Respiration, BP, Pulse, Temperature As Well As One Or More Out Of Arrythmia, Cardiac Output, Oxygen And Carbondioxide Saturation Levels

(96) Brain Mapping System

(97) Evoked Potential System

(98) Holter Monitor System

(99) X-Ray Tubes And Tube Inserts For X-Ray Equipment, CT And Cardiac More Than 20/40 KW

(100) Micro Processor Controlled High Frequency X-Ray Generator More Than 50 KW

(101) Contrast Medium Injector With Or Without ECG Trigger

(102) Catheterisation Cine Film Analyser

(103) Radiation Protection Equipment

(104) Catherterisation Table Light (Dentalite)

(105) Air/ Power Driven Drills, Saws And Reamers

(106) Automatic Percutaneous Lumbar Disectomy, Console And Kits ��

(107) Urodynamic Study

(108) Gamma Counter

(109) Cell Counter

�(110) DC Defibrillator For External Use

(111) Suction Catheter, Epidural Catheter, Thermodilution Catheter

(112) Manual Skin Grafting Knife And Its Disposable Blades

(113) Electric Dermatome (Skin Grafting Knife) Electrically Operated (Mains Battery Powered) And Its Disposable Knife Blades

(114) Air Driven Dermatome (Skin Grafting Knives) Operated On Compressed Air And Its Disposable Knife Blades

(115) Mesh Graft Dermatome For Expanding Skin Grafts, Disposable Mesh Graft Carriers For The Above

(116) The Following Items Required By Spinal Patients And Other Categories Of Physically Handicapped People: -

(A) Chairs - Folding Wheel Chairs With Detachable Arms And Footrests, Special Light Wheel Chairs For Easy Handling, Motorised Wheel Chairs, Special Purpose Chairs For Stairs Climbing For Tetraplegics And Paraplegic Workers (B) Aids For Disabled, Namely, Folding Walking Frames

(D) Specialised Fixtures For Orthopaedic And Spastic, Tetraplegics For Manoeuvring And Providing Dexterity To Fingers And Wrist

(E) Turning Beds For Prevention Of Pressure Sores

(F) Emulsion Cushions For Tetraplegics And Working Paraplegics To Avoid Pressure Sores

(117) Multichannel (More Than 3 Channels) Cardiac Monitoring System With / Without Central Monitoring Unit

(118) Hyperthermia Machine

(119) Polypropylene Mesh For Hernia Repair

(120) Dental X-Ray Machine

(121) Digital Imaging System For� Face X-Rays

(122) Orthopantom Ram (O.P.G.)� X-Rays For Jaws

(123) Jaw Surgery Equipment �

(A) Stryker Saws

(B) Special Titanium And Tungsten Carbide Drill Bits

(124) ECG Transtelephonic Recorder / Transmitter / Recorder-Cum-Transmitter

(125) Linear Accelarator

(126) Precision Delivery Device Used For Administration Of Insulin With Penfill Cartridges Such As Insulin Pen

(D) Other goods, namely: -

(1) Dental Implant

(2) Dental Cements

(3) Impression Materials Of All Types/ Alginate / Rubber Base / Silicon Base

(4) Dental Fillings And Non Precious Metal For Crown / Bridge / And Cast Partial Denture-

(A) Chrome Cobalt/ Nickel Chrome / Porcelain Bond Metal / Low Fusing Technique Alloy

(B) Dental Crowns And Artificial Teeth

(5) Gutta- Percha Points - Dental Silver Amalgam

(6) Dental Investment Of All Types/ Phosphate Bond/ Gypsum Bond/ Plaster And Stone ��

(7) Dental X-Ray Film - Intra-Oral/ Extra- Oral/ Panoramic/ Occlusal

(8) Dental Porcelain Of All Types

(9) Acrylics For Dental Use - Denture Base Material Heat Cure And Cold Cure

(10) Waxes Of All Types For Dental Use

List 9(A) (See S. No. 174 of the Table)

PARTS, CONSUMABLES AND OTHER ITEMS

(1) Leather, Plastic, Rubber Coco Board, Masonite Board Or Plastic Board, Heels With Or Without Rubber/PVC Top Lift

(2) Toe Caps And Counters For Leather Footwear

(3) Insoles Or Midsoles And Sheets Therefore

(4) Welts Made From Leather Or Plastic

(5) Shoes Eyelets

(6) Felt Sleeves

(7) Heel Tips

(8) Unit Soles With Or Without Heels

(9) Stamping Wheels

(10) Patterns For Leather Footwear

(11) Plastic Or Nylon Tipped Hammers

(12) Plastic, PVC Or Nylon Lasts With Or Without Steel Hinges

(13) Clicking Boards For Leather Machinery

(14) Harness Needles For Hand Sewing Pre-Punched Cards

(15) Pre-Punched Cards

(16) Leather Designers Kit, Namely, Designers Knife, Shoe Measuring Tape, Designers Tape And Satra Vacuum Former

(17) Industrial Sewing Machine Needles With Leather Point

(18) Bell Skiving Knives

(19) Band Knife For Splitting Machines

(20) Cutting And Clicking Dies

(21) Aluminium Shoe Forms With Or Without Heating Elements

(22) Silver Marking Pencils Or Pens And Refills Thereof�� (23) Polyurethane Films And Polyurethane Foils Of Thickness 0.3 Mm. And Above But Not Above 0.7 Mm., For Finishing Leather

(24) Non-Woven Material Coated With Thermoplastic For The Manufacture Of Toe-Counters

(25) Cellulose Board Insole Sheets

(26) Leather Board Made From Leather Scrap For The Manufacture Of Counters And Stiffeners

(27) Masonite Or Coco Board

(28) Sole Leather Bends

(29) Styrene Butadiene Styrene Oil bound Copolymer For The Manufacture Of Soles

(30) Rubber, Resin Rubber, EVA Or Crepe Sheets For Soles And Heels

(31) Felt, All Types

(32) Sulphonated / Sulphated / Oxidised / Chlorinated Cod Oil Or Sulphonated / Sulphated / Oxidised / Chlorinated Neats Foot Oil Or Sulphonated / Oxidised / Chlorinated Fish Oil Or Mixtures Thereof

(33) Pigment Finishes For Leather

(34) Aluminium Tanning Agents, Oil Tanning Agents, Zirconium Tanning Agents, Basic Chrome Sulphate

(35) Polishes, Creams And Similar Preparations For Footwear Or Leather

(36) Casein, Resin (Other Than Acrylic Resin) And Polyurethane Binders

(37) Slip Agents Of Heading 32.08

(38) Lacquer And Lacquer Emulsion Of Heading 32.08

(39) Preservatives Of Heading 29.42

(40) Synthetic Fat Liquors (With Or Without Hydrocarbons) , Non-Ionic Fat Liquors, And Mixtures Thereof

(41) Fatty Oil Or Pull Up Oil

(42) Syntans��

(43) Solvent Soluble Dye Mordant Brown Of Hue No.79

(44) Solvent Soluble Dye Acid Brown Of Hue Nos. 75, 76, 97, 98, 126, 127, 144, 159, 160, 161, 162, 165, 188, 191, 194, 196, 214, 237, 256, 265, 268, 270, 282, 290, 298, 303, 310, 321, 322, 349, 355, 358, 359, 360, 362, 365, 373, 387, 396, 402, 422, 425, 432, 433, 434 Or 447

(45) Solvent Soluble Dye Acid Black Of Hue Nos. 50, 52, 71, 76, 82, 83, 84, 85, 115, 132, 169, 172, 194, 209, 210, 213, 215, 221 Or 234

(46) Solvent Soluble Dye Acid Blue Of Hue Nos. 115, 133, 134, 193, 254, 260, 312 Or 349

(47) Solvent Soluble Dye Direct Blue Of Hue No. 59 Or 78

(48) Solvent Soluble Dye Acid Red Of Hue No. 97, 119, 120, 167, 231, 234, 248, 283, 324, 362, 399, 404, 407 Or 423

(49) Solvent Soluble Dye Direct Red Of Hue No. 23, 99, 111 Or 239

(50) Solvent Soluble Dye Acid Green Of Hue No. 20, 26, 68 Or 111

(51) Solvent Soluble Dye Acid Orange Of Hue Nos. 51, 66, 78, 80, 95, 162, 168 Or 170

(52) Solvent Soluble Dye Acid Violet Of Hue No. 54, 80 Or 90

(53) Solvent Soluble Dye Acid Yellow Of Hue No. 96, 99, 194, 204, 220 Or 243

(54) Solvent Soluble Dye Direct Orange Of Hue No. 61

(55) Solvent Soluble Dye Direct Brown Of Hue No. 94 Or 209

(56) Solvent Soluble Dye Direct Violet Of Hue No. 46��

(57) Solvent Soluble Dye Direct Black Of Hue No. 120 Or 155

(58) Solvent Soluble Dye Direct Green Of Hue No. 66

List 9(B) (See S. No. 174 of the Table)

OTHER PARTS, CONSUMABLES AND ITEMS

(1) Formulations Containing Either Thio Cyano Methyl Thio Benzothiazole (TCMTP) Or Para Chloro Meta Cresol (PCMC) Or Both; Self Basifying Chrome Tanning Agents

(2) Penetrators

(3) Stamping Foil In Strips Of Width Not Exceeding 6 Inches

(4) Eyelets, Hooks, Rings, All Type Locks Including Magnetic Locks, Push Clips, Metal Handle, Key Chain Holder, Corners, Puller, Fancy Caps, Clamps, Decorative Rivets, Decorative Fittings And Logos, Handle Holders, Studs, Sockets, Hinges, Buckles, Metal Frames, Tacks And Washers

(5) Buttons, Press-Fasteners And Snap-Fasteners Falling Under Heading 96.06

(6) Magnetic Buttons

(7) Abrasive Sheets Falling Under Sub-Heading 6805.20

(8) Shanks And Welts Falling Under Headings 73.26 And 64.06 Respectively

(9) The Following Chemicals For The Manufacture Of Leather Chemicals:

(I) Phenol

(II) Naphthalene

(III) Paraffin Wax

(IV) Dicarboxylic Acid And Mixtures Thereof

(V) Acrylic Acid / Methacrylic Acid

(VI) Synthetic Substitute For Sperm Oil

(VII) Synthetic Substitute For Neats Foot Oil

(VIII) Alcohol Mixture Of C₉, C_10, C₁₁

(IX) Thio Cyano Methyl Thio Benzothiazole (TCMTB)

(X) Para Chloro Meta Cresol (PCMC)

(XI) Lactic Casein

(XII) Titanium Dioxide

(XIII) Iron Oxide

(XIV) Cellulose Acetate Butyrate

(XV) Methoxydihydropyrane

(XVI) Dioxy Diphenyl Sulphone

(XVII) Dehydro Thio Paratoludine

(XVIII) Nitro Amino Phenol Sulphonic Acid

(XIX) Dicyandiamide

(XX) Silicone Oil In Solvent Or Water

(XXI) Sodium Picramate

(XXII) Methyl Pyrozollic Acid��

(XXIII) Itaconic Acid

(XXIV) 1-Methoxy Propanol-2

(XXV) Ethyl Acetate

(XXVI) Butyl Acetate

(XXVII) 2 Ethyl Hexyl Acetate

(XXVIII) Emulsifiers

(XXIX) Ethyl Glycol

(XXX) Butyl Glycol

List 10 (See S. No.190 of the Table)

(1) Cold drawn free cutting brass rods of diameter 0.4 mm. to 14 mm.

(2) Leaded brass strips and sheets in coils or flats of thickness upto 4 mm. and width upto 40 mm.

(3) Leaded brass strips in coils or in straight length of thickness 0.01 mm. to 0.05 mm. and width upto 50 mm.

(4) Leaded naval brass strips in coils of thickness 0.12 mm. to 3 mm. and width 8 mm. to 30 mm.

(5) Nickel silver brass strips / flats of thickness 0.10 mm. to 1.50 mm. and width 6 mm. to 55 mm.

(6) Phosphor bronze strips of thickness 0.02 mm. to 1.5 mm. and width from 10 mm. to 30 mm.

(7) Phosphor bronze rods of diameter 0.5 mm. to 2 mm. and length upto 3000 mm.

(8) Brass pipes of outer diameter 0.45 mm. to 1.9 mm.

(9) German silver rods of diameter 5 mm. to 10 mm.

(10) Horological steel rods (leaded) bright drawn or centreless ground finish in perfectly straightened lengths of diameter 0.3 mm. to 6 mm. and length upto 3 metres

(11) Horological steel strips cold rolled with accurate flatness and bright regular edges of thickness 0.01 mm. to 1 mm. and width 0.2 mm. to 30 mm.

(12) Super alloy strips, of thickness upto 0.70 mm. and width upto 40 mm.

(13) Synthetic ruby for watch jewels

(14) Spring steel strips type DIN 2075 Kl₂ of thickness 0.01 mm. to 0.5 mm. and width 0.2 mm. to 0.5 mm

(15) Stainless steel strips of thickness 0.01 mm to 1.5 mm and width upto 45 mm

(16) Stainless steel wire in coils for click spring and setting lever spring of diameter 0.1 mm. to 1.5 mm.

(17) Brass flats of thickness upto 6.5 mm., width upto 50 mm. and length upto 2000 mm.

(18) Brass rods of diameter upto 36.5 mm.

(19) Nickel silver rods of diameter upto 3 mm. and length upto 3000 mm.

(20) Leaded brass pipes of outer diameter 18 mm. to 35 mm., and inner diameter 10 mm. to 30 mm.

(21) Stainless steel flats, cold rolled or hot rolled for manufacture of watch case bezels and other watch parts, of thickness 2.5 mm. to 10 mm. and width upto 55 mm.

(22) Cold rolled stainless steel strips for the manufacture of watch back covers and other watch parts, of thickness upto 5.0 mm. and width upto 55 mm.

(23) Unleaded brass strips of thickness 0.07 mm. to 1.5 mm. and width 5 mm. to 50 mm.

(24) Phosphor Bronze strips in coils of thickness 0.125 mm. and width 28 mm.

(25) Lacquers and varnishes

(26) Brass circles of thickness 0.4 mm. to 0.5 mm. and diameter 24 mm. to 50 mm.

(27) Brass for making appliqu�s/indexes/logos/windows with 2 feet, of thickness 0.3 mm. to 2 mm. and width 1 mm. to 4 mm. (28) Nickel silver circles of thickness 0.5 mm. and below and diameter 24 mm. to 50 mm.

(29) Tritium activated zinc sulphide

(30) Luminous compounds for dials

(31) Silver solder core wire for dial legs in straight length or in coil of diameter 0.4 mm. to 1 mm.

(32) German silver strips of thickness 0.1 mm. to 1 mm. and width 5 mm. to 10 mm.

(33) Free cutting quality stainless steel rods of diameter upto 6 mm. and length upto 3000 mm.

(34) Polyamide strips of thickness upto 0.10 mm. and width upto 15 mm.

(35) Copper Berillium strips in coils of thickness upto 0.35 mm. and width upto 25 mm.

(36) Polished steel strips in coils of thickness 0.05 mm. to 0.5 mm. and width upto 15 mm.

(37) Leaded brass rods of diameter 0.5 mm. to 20 mm. and length upto 3000 mm.

(38) Nickel silver strips of thickness upto 0.1 mm. and width upto 50 mm.

(39) Titanium copper strips in coils/ cut lengths of thickness 0.18 mm. to 0.20 mm. and width 15 mm. to 20 mm.

(40) Aluminium alloy strips whether or not in coil of thickness upto 0.55 mm. and width upto 35 mm.

(41) Leaded beryllium copper rods of diameter 0.5 mm. to 20 mm. and length upto 3000 mm.

(42) Stainless steel pipes of outer diameter 1.8 mm., inner diameter 1.54 mm. and length upto 3000 mm.

(43) Mineral glass sheets

(44) Copper wire of diameter 1 mm. to 2.5 mm. for making logos/indexes/appliqu�, for watch dials

(45) Crystal glass chatin (cast glass profiles, edge worked and enamelled with reflecting layer) for watch dials

(46) Unleaded brass sheet of thickness 0.10 mm. to 1.5 mm., width upto 250 mm. and length upto 1250 mm.

(47) Titanium strips of thickness 0.01 mm. to 2.0 mm. and width upto 55 mm.

(48) Titanium flats of thickness upto 7 mm. and width upto 55 mm.

(49) Titanium rods of diameter upto 20 mm. and length upto 3000 mm.

List 11 (See S. No 207 of Table)

Omitted

List 12 (See S. No. 214, 216 and 217 of the Table)

(1) Land Seismic Survey Equipment And Accessories, Requisite Vehicles Including Those For Carrying The Equipment, Seismic Survey Vessels, Global Positioning System And Accessories, And Other Materials Required For Seismic Work Or Other Types Of Geophysical And Geochemical Surveys For Onshore And Offshore Activities

(2) All Types Of Drilling Rigs, Jackup Rigs, Submersible Rigs, Semi Submersible Rigs, Drill Ships, Drilling Barges, Shot-Hole Drilling Rigs, Mobile Rigs, Work over Rigs Consisting Of Various Equipment And Other Drilling Equipment Required For Drilling Operations, Snubbing Units, Hydraulic Work over Units, Self Elevating Work over Platforms, Remote Operated Vessel(ROV)

(3) Helicopters Including Assemblies/Parts

(4) All Types Of Marine Vessels To Support Petroleum Operations Including Work Boats, Barges, Crew Boats, Tugs, Anchor Handling Vessels, Lay Barges And Supply Boats, Marine Ship Equipment Including Water Maker, DP System And Diving System

(5) All Types Of Equipment/Units For Specialised Services Like Diving, Cementing, Logging, Casing Repair, Production Testing, Simulation And Mud Services, Oil Field Related Lab Equipment, Reservoir Engineering, Geological Equipment, Directional Drilling, Stimulation, Coil Tubing Units, Drill Stem Testing (DST), Data Acquisition And Processing, Solids Control, Fishing (As Related To Downhole Retrieval In Oil Field Operations), Well Control, Blow-Out Prevention (BOP), Pipe Inspection Including Non Destructive Testing, Coring, Gravel Pack, Well Completion And Work Over For Oil/ Gas Wells Including Wire Line And Downhole Equipment

(6) All Types Of Casing Pipes, Drill Pipes, Production Tubing, Pup Joints, Connections, Coupling, Kelly, Cross Over And Swages, Drive Pipes

(7) All Types Of Drilling Bits, Including Nozzles, Breakers And Related Tools

(8) All Types Of Oil Field Chemicals Including Synthetic Products Used In Petroleum Operations, Oil Well Cement And Cement Additives, Required For Drilling, Production And Transportation Of Oil Or Gas

(9) Process, Production And Well Platforms For Oil, Gas And Water Injection Including Items Forming Part Of The Platforms And Equipment Required Like Process Equipment, Turbines, Pumps, Generators, Compressors, Prime Movers, Water Makers, Filters And Filtering Equipment, Telemetery, Telecommunication, Tele-Control And Other Material Required For Platforms

(10) Line Pipes For Flow Lines And Trunk Pipelines Including Weight-Coating And Wrapping

(11) Derrick Barges, Mobile And Stationary Cranes, Trenchers, Pipelay Barges, Cargo Barges And The Like Required In The Construction/Installation Of Platforms And Laying Of Pipelines

(12) Single Buoy Mooring Systems, Mooring Ropes, Fittings Like Chains, Shackles, Couplings Marine Hoses And Oil Tankers To Be Used For Oil Storage And�� Connected Equipment, Tanks Used For Storage Of Oil, Condensate, Water, Mud, Chemicals And Related Materials

(13) All Types Of Fully Equipped Vessels And Other Units/Equipment Required For Pollution Control, Fire Prevention, Fire Fighting, Safety Items Like Survival Craft, Life Raft, Fire And Gas Detection Equipment, Including H₂S Monitoring Equipment.

(14) Mobile And Skid Mounted Pipe Laying, Pipe Testing And Pipe Inspection Equipment

(15) All Types Of Valves Including High-Pressure Valves

(16) Communication Equipment Required For Petroleum Operations Including Synthesized VHF Aero And VHF Marine Multi Channel Sets

(17) Non-Directional Radio Beacons, Intrinsically Safe Walkie-Talkies, Directional Finders, EPIRV, Electronic Individual Security Devices Including Electronic Access Control System

(18) Specialized Antenna System, Simplex Telex Over Radio Terminals, Channel Micro Wave Systems, Test And Measurement Equipment

(19) X-Band Radar Transponders, Area Surveillance System

(20) Common Depth Point (CDP) Cable, Logging Cable, Connectors, Geo-Phone Strings, Perforation Equipment And Explosives

(21) Wellhead And Christmas Trees, Including Valves, Chokes, Heads Spools, Hangers And Actuators, Flexible Connections Like Chicksons And High Pressure Hoses, Shut Down Panels

(22) Cathodic Protection Systems Including Anodes

(23) Technical Drawings, Maps, Literature, Data Tapes, Operational And Maintenance Manuals Required For Petroleum Operations

(24) Sub-assemblies, tools, accessories, stores, spares, materials, supplies, consumables for running, repairing or maintenance of the goods specified in this List

List 13 (See S. No. 218 of the Table)

(1) Land Seismic Survey Equipment And Accessories, Seismic Survey Vessels, Global Positioning System And Accessories, And Other Materials Required For Seismic Work Or Other Types Of Geophysical And Geochemical Surveys For On-Shore Activities

(2) All Types Of Drilling Rigs, Shot Hole Drilling Rigs. Mobile Rigs, Work Over Rigs Consisting Of Various Equipment And Other Drilling Equipment Required For Drilling Operations, Snubbing Units, Hydraulic Work Over Units, Self-Elevating Work Over Platforms

(3) All Types Of Equipments / Units For Specialized Services Like, Cementing, Logging, Casing Repair, Production Testing, Simulation And Mud Services, Reservoir Engineering, Geological Equipment, Directional Drilling, Stimulation, Coil Tubing Units, Drill Stem Testing (DST), Data Acquisition And Processing, Solids Control, Fishing (As Related To Downhole Retrieval In Coal Bed Methane Operations), Well Control, Blow-Out Prevention (BOP) , Pipe Inspection Including Non Destructive Testing, Coring, Gravel Pack, Well Completion And Work Over For CBM Wells Including Wire Line And Downhole Equipment

(4) All Types Of Casing Pipes, Drill Pipes, Production Tubing, Pup Joints, Connections, Coupling, Kelly, Cross Over And Swages, Drive Pipes

(5) All Types Of Drilling Bits, Including Nozzles, Breakers And Related Tools

(6) All Types Of Coal Bed Methane Chemicals Including Synthetic Products Used In Coal Bed Methane Operations, Required For Drilling, Production And Transportations Of Gas

(7) Process, Production And Well Installation For CBM And Water Injection Including Items Forming Part Of The Installation And Equipment Required Like Process Equipment, Turbines, Pumps, Generators, Compressors, Prime Movers, Water Makers, Filters And Filtering Equipment, Telemetery, Telecommunication, Tele-Control And Other Material Required For Installations

(8) Line Pipes For Flow Lines And Trunk Pipelines Including Weight Coating And Wrapping

(9) Tanks Used For Storage Of Coal Bed Methane, Water, Mud, Chemicals And Related Materials

(10) All Types Of Fully Equipped Units/Equipment Required For Pollution Control, Fire Prevention, Fire Fighting, Safety Items Like Fire And Gas Detection Equipment, Including p S Monitoring Equipment

(11) Mobile And Skid Mounted Pipe Laying, Pipe Testing And Pipe Inspection Equipment

(12) All Types Of Valves Including High-Pressure Valves

(13) Communication Equipment Required For Operations Including Synthesized VHF Aero And VHF Multi Channel Sets, Non-Directional Radio Beacons, Intrinsically Safe Walkie-Talkies, Directional Finders, EPIRV, Electronic Individual Security Devices Including Electronic Access Control System

(14) Specialized Antenna System, Simplex Telex Over Radio Terminals, Channel Micro Wave Systems, Test And Measurement Equipment

(15) Area Surveillance System

(16) Common Depth Point (CDP) Cable, Logging Cable, Connectors, Geo-Phone Strings, Perforation Equipment And Explosives

(17) Wellhead And Christmas Trees, Including Valves, Chokes, Heads Spools, Hangers And Actuators, Flexible Connections Like Chicksons And High Pressure Hoses, Shut Down Panels, Cathodic Protection Systems Including Anodes

(18) Technical Drawings, Maps Literature, Data Tapes, Operational And Maintenance Manuals Required For Coal Bed Methane Operations

(19) Sub-assemblies, tools, accessories, stores, spares, materials, supplies, consumables for running, repairing or maintenance of the goods specified in this List

List 14 (See S. No 219 of the Table)

(i) Brick press with accessories like moulds, pallets, stackers, clamping devices or the like for fly ash sand-lime brick capacity 3000-5000 bricks/hr. up and down stroke pressure 300-400 kgs. / sq.m.

(ii) Fly ash block making machine of capacity 1000 - 2000 block/hr. with vibrators, mixer and accessories like moulds, pallets, stackers, clamping devices or the like

(iii) Mixer with bottom valve and outlet pipes for cellular concrete

(iv) Moulding equipment, cross cutting plant and longitudinal cutting plant, for cellular concrete

(v) Centering bridge for moulds

(vi) Moving grate sintering strand for lightweight fly ash cellular concrete

(vii) Purification plant including diaphragm, pump, vacuum filter, gas scrubber, for phosphogypsum

(viii) Flash calciner

(ix) Centrifuge for calcination equipment

(x) Partition panel plant

(xi) Moulds for phosphogypsum

(xii) Drier-cum-calciner

(xiii) Edge Runner Mill (for crushing and kneading of Clay and Fly ash Mixture output 15 to 40 tons per hour depending on the perforation of the grinding plates)

(xiv) Pan Mixer (output 25 tons per hour)

(xv) Double Shaft Mixer (for mixing of the material consisting of Clay and Fly ash)

(xvi) Vacuum Worm Press Extrusion machine (capacity of the press up to 36 tons of material per hour)

(xvii) Mouth piece (for the above vacuum Worm Press with dimensions corresponding to the required type of Bricks or Blocks, which will be produced)

(xviii) Automatic Equipment (for cutting and handling of Bricks between the pressing shop and dryers)

(xix) Plant and Machinery required for making hollow-core roofing/flooring units

(xx) Large-size plants for manufacturing of hollow and solid concrete blocks for walling

(xxi) Mechanised hydraulically operated Tunnel Form of Wall forms, Slabforms, Column forms

(xxii) Large-size vibrating-beds with integrated curing and wire-tensioning arrangements

(xxiii) Vibrating-distributors for speedy production of prefab building parts

(xxiv) Hydraulic presses for manufacturing pavement blocks

(xxv) Hydraulic heavy duty press for making Hollow and Solid Concrete Blocks

(xxvi) Foam Generating Equipment, spiral pumps and Foaming compound for lightweight cellular concrete

(xxvii) Densified Wood Fibre Plates (Moulded door skins/ door facings) for door shutters

List 15 (See S. No. 222 of the Table)

1. Sarin Dia Planner

2. Colorimeter

3. Proportion Scope

4. Diamond Tester

5. Moissanite Tester

6. Stimulant Set

7. Ogi Mega Scope

8. Gemmoscope

9. Microscope Of All Types

10. U.V Lamp

11. Stoppani Gauge

12. Gem Meter

13. Day Light Lamp

14. Loupes And Sieves

15. Hardness Pencil Set

16. Refractometer

17. Polariscope

18. Dichroscope

19. Color Master

20. Geiger Mular Counter

21. Spectroscope Of All Types

22. Furnace With Microprocessor

23. Steam Cleaner

24. Magnetic Polisher

25. Plating Machine

26. Vacuum Pump

27. Foredom Motors

28. Files, Brushes, All Types

29. Laser Soldering Machine

30. X Ray Compact Machine

31. Electroforming Machine

32. Micromatic Wax Welder

33. Stamping Machine

34. Refining System

35. Jcds Software

36. Jewel Cad Software

37. Investment Powder

38. Mould Rubber

39. Injection Wax

40. Electro Plating Solutions

41. Tools And Equipment Relating To Handmade Process

42. Multiple Pass Drawing Machine

43. Drawing Benches

44. Tube Forming Machines

45. Machine For Chain Soldering Side By Side

46. Spirals Making Machines

47. Presses (Eccentric, Hydraulic Drawing Press)

48. Rolling Machine (Combined/Profile Groovers/ Strip Making)

49. Casting Machines/ Vacuum/ Centrifugal

50. Valcangers

51. Investment Mixing Machine

52. Wax Injector

53. Programmable Burnout Furnace

54. Devaxing Oven Machine

55. Sand Blasters

56. Frames

57. Pneumatic Sprue Cutter

58. Flexible Shafts With Motor

59. Hand Held Micro Motors Light Duty

60. Hand Pieces For Flexible Shaft

61. Engravers

62.� Hand Helm Micro Motor With Variable Speed

63. Tumbling Machines

64. Rotary, Tumbler With Media

65. Centrifugal Barrel Polishing Machine With Media

66. Buffing Machine

67. Dust Collectors

68. Electro Polishing Unit

69. Electroplating Unit

70. Ultrasonic Cleaning Machine

71. Vibrator With Steel Media

72. Split Lap Machine

73. Analytical Balances

74. Cupellation Furnace

75. Xrf Machine

76. Gold/Paste, Gold Solders

77. Braking Machine

78. Gas Torch

79. Breezing Torch Unit

80. Brazing Plates

81. Drills, Burs, Needles

82. Compounds, Chemicals, Buffs And Compounds, Salts, Solutions, Baths

83. Silver Pastes, Silver Solders Findings

84. Testing Equipments

85. Electo Discharge Machine

86. Engraving Machine

87. Drilling Machine

88. Milling Machine

89. Surface Grinding Machine

90. Electronic Weighing Balance Carats/Grams

91. Other Apparatus And Tools

92. Ventilation System With Air Purifier

93. Safety Glasses

94. Masks

95. Precious Metal Salts

96. Melting Pots

97. Stamping Press Of All Types

98. Stamping Dies

99. Engraving Block And Gravers

100. Various Tools, Punches, Hammers, Anvil, Files

101. Conveyor Belf Furnace

102. Machine Tools For Working In Hand Pneumatic Hydraulic Or Self-Contained Non Electric Motor

103. Hand Saw Beads

104. Inter-Changeable Tools, Hand Tools Or Power Operated Tools For Pressing, Stamping, Punching And Taping

105. Hand Tools, Blow Lamp Anvils, Portable Forges, Hand And Pedal Operated Grinding Wheels With Frame Works

List 16 (See S. No. 227 of the Table)

Omitted

List 17 (See S. No. 228 of the Table)

1. All types of Refinery Process Units including distillation (CDU, VDU, Condensate Fractionator), thermal cracking (Delayed Coker, Visbreaker, Flexicoker), catalytic cracking (FCC, Hydrocracker), lube processing (Deasphalting, Dewaxing, Solvent Extraction), hydro-desulphurisation/ hydrotreating (Naphtha, Diesel, VGO, ARDS, LC Fining, H. Oil), alkylation, isomerisation, catalytic reforming, treating (Merox, Amine), recovery (Propylene, Ethylene, Butane), synthesis (MTBE, TAME), gas concentration plant, bitumen blowing, sour water stripping and extraction (Pentane, Hexane, BTX).

2. All types of Hydrogen Generation, Recovery and Purification Plants, Sulphur Recovery Plants including Tail Gas Treatment Units, with associated components and equipments, including reactors (like shift, Claus, hydrotreater, CBA, desulphurizer), furnaces, steam reformers, waste heat boilers, condensers, Pressure Swing Adsorption (PSA) systems, incinerators, vessels, boilers, pumps, compressors, drivers, alongwith associated instrumentation and control systems and auxiliaries (skidded or otherwise).

3. All types of Utility Systems, including Nitrogen Systems comprising of generation, storage and vaporization plants, Flare Systems comprising of flare tips, stacks, seal drums, knockout drums and pumps, Refrigeration Systems comprising of compressors, refrigerant storage and heat exchangers, Emergency Power Systems comprising of generators, UPS and batteries, with component equipments and all systems auxiliaries, instrumentation and control systems.

4. All types of Process Subsystems, including Continuous Catalyst Regeneration Systems for Reformer, Recovery Plus Systems for Reformer, Power Recovery Train Systems for FCC, Feed Nozzles for FCC, Vapour Recovery Systems, Cryogenic Systems for LPG either supplied separately or as a whole, with component equipments, drivers, instrumentation and control systems, and auxiliaries.

5. All types of Water Handling and Treatment Systems, including sea water intake systems comprising of sea water band screens, Desilting systems for still basin, Sea Water filtration/Chlorination Systems, Desalination plants, Cooling Water Towers, Demineralization plants, Condensate Polishing Systems, Deaerators and Potable Water Systems, and all component equipments, vessels, pumps, vapourisers, condensers, filters, eductors, heat exchangers, drivers, screens, framing structures, gates, instrumentation and control systems, activated carbons, ion exchange resins, resin traps, additive injection systems and auxiliaries (skidded or otherwise)

6. All types of Effluent Solids/Liquids/Gaseous Processing, Handling, Control, Abatement and Disposal Systems, including plate interceptors, dissolved air floatation devices, skimmers, hydrocyclones, clarifiers, chemical dosing systems, acid treatment and biological treatment systems, Spent Caustic Neutralisation Systems and Sewage Filtration/Treatment Systems, with component equipments, instrumentation and control systems.

7. All types of Air Handling Systems and Equipments, including plant/instrument air compressors, FD/ID fans, blowers, dehumidifiers, pneumatic systems, mixers, dryers, intake filters, vents, silencers, cyclones, stacks, manifolds, ducts, with drivers, auxiliary seal/lube/control oil systems, instrumentation and control systems.

8. All types of Fired Heaters and Boilers, with radiant coils and sections, transfer line assemblies, convection coils and sections, cross over/jump over pipes, fittings, tube sheets, tube supports, refractory materials, structural steel supports, casings, stacks, dampers, soot blowers, ducting systems, gas/oil/dual burner assemblies, burner tiles, waste heat boilers (WHB) , steam generators, economizers, air/fuel preheat systems, FD/ID fans, fuel gas/oil skids, and including LPG vaporizers, steam superheaters, heat recovery steam generators, electric heaters, FCC flue gas coolers, steam reformers, CO boilers, circulating fluidised bed boiler, auxiliary boilers, process interheaters, thermal reactors, thermal incinerators, coke feeders, limestone feeders, ESP/baghouse filters, alongwith associated instrumentation & control systems, including burner lighting, flame detection and burner management systems.

9. All types of Compressors, including axial, centrifugal, diaphragm, reciprocating, rotary screw and sliding vane type compressors, for gas, air, hydrocarbon and all special services including FCC Power Recovery Trains (PRT) , LPG vapour return blowers, with drivers of motor or steam turbine or expansion turbine or engine or gas turbine or hydraulic turbine types, speed governor systems, seal/lube/control oil systems (skidded or otherwise) , gear assembly, bearings, barring gears, clutch, couplings, intercoolers, after coolers, suction filters, instrumentation & control systems including vibration monitoring anti surge control, inlet guide vane control, sequencer control, control panel and machine condition monitoring systems.

10. All types of Heat Exchangers, including shell and tube, double pipe, kettle, plate welded plate, high pressure (breech lock) , Armstrong and brazed types, with plain or fin or High Flux or U tubes for cooling intercooling, trim cooling, chilling, condensing, crystallizing, heating, vaporizing or reboiling services, with tubes, tube sheets, head assemblies, shells, flanges, bolts and nuts, gaskets, baffles, tie rods, instrumentation and control systems.

11. All types of Air Cooled Exchangers, for cooling, intercooling, trim cooling, chilling and condensing services, with plain/finned tubes, of carbon steel, admiralty brass, alloy steel, stainless steel, monel or titanium or other materials, with fans, fan drivers, structural steel support frameworks, instrumentation and control systems, anti vibration systems.

12. All types of Agitators and Mixers, including static, jet, dilution types, motor drivers, aeration systems, with instrumentation and control systems.

13. All types of Filters, Screens and Strainers, including backwash, bucket, carbon, cartridge, duplex, pressure / mechanical, rotary, drum, sand, sock/bag, vaccum types, and special FCC net bottoms catalyst filters, screens, strainers, demisters and sea water clarifiers, with instrumentation and control systems.

14. All types of Vaccum Producing Equipments, including ejectors, educators, venturies, with instrumentation and control systems.

15. All types of Materials Separation systems, including cyclones, centrifuges, coalescers, dust collectors, electrostatic precipitators, oily water separators, flocculators, and specialized systems of Crude Oil Desalters, Reactor Cyclones and Regenrator Cyclones for FCC, third Stage Separators and Fourth Stage Cyclone Separators for FCC, with vessel internals, grids, distributors, supports, instrumentation and control systems.

16. All types of Materials Transporting Equipments, including loading and unloading arms and racks, gantries, dispatch tanks, loading / transfer pumps, hydraulic systems, weigh bridges, Diesel shunters, feed or injection or spray nozzles, skimmers, soot blowers, with instrumentation and control systems, including load cells and metering stations.

17. All types of Electrical Equipments including switchyard equipments, transmitters, relays, solar power systems, including solar panels, batteries and charger, phase shift monitors, motor or steam turbine generators, protection relays for generators, auxiliary seal/lube/control oil systems, actuators, annunciators, lighting masts, lighting fittings, panels, batteries and battery chargers, bus ducts, all types of cables including power/instrument/compensating/fibre optic/coaxial/control cables, cable joints, capacitors, distribution boards, fittings, substations, grounding/neutral resistors, heat tracing systems including insulation, microprocessor based process controllers, local control stations, motor control centres, power control centres, HT/LT motors, shock eliminators, HT/LT switch gears, transducers, HT/LT transformers, UPS and variable speed drivers over current protection devices, instrumentation and control systems including load distribution and management systems and auxiliaries, (skidded or otherwise) .

18. All types of Materials Handling Equipments including belt or pneumatic conveyors, ducts, hoists, bucket or jib cranes, (with or without gangways), pipe and hoses, funnels, hoppers, disengaging lock hoppers, catalyst addition pots, valves and sampler devices, bagging, weighing and bag stitching systems, weigh bridges, buoy systems for crude oil receipt, pipeline and manifolds with valves, fenders, mooring aids, laser docking systems, product tanker loading facilities, with associated equipments, instrumentation and control systems, and auxiliaries.

19. All types of coke handling and storage equipments, including coke crushers, coke cutting systems, coke drum unheading devices, coke drum switching systems, coke conveyors, stackers and reclaimers, silos/hoppers, dust abatement systems, belt weighers, Sulfur Handling and Storage Equipments and Sulphur Granulation or Flaking or Prilling Systems with associated equipments, instrumentation and control systems and auxiliaries.

20. All types of Product Filling Systems, including LPG bottles filling machines and bitumen drum filling machines, and associated equipments, instrumentation and control systems and auxiliaries.

21. All types of injections and Dosing Packages, for Injection or metering or dosing of chemicals, additives, inhibitors, odourisers, oxygen scavengers, blocides, chlorine, polymers, caustic, acids, emulsifiers, antifoams or antifoulants, with their component equipments, like drums, tanks, pumps, instrumentation and control systems, auxiliaries (skidded or otherwise) .

22. All types of Pumps, including API or non-API, centrifugal, diaphragm, in-line, jockey, vertical, booster, barrel, gear, Sundyne, screw, ram, reciprocating or submersible types, single stage or multistage types, for petroleum crude or intermediate products or petroleum products and byproducts, water including sea water and boiler feed water, chemicals, slops or sludge services, liquid booster for LPG (cryogenic) , with motor or steam turbine or hydraulic turbine or diesel engine drivers, and instrumentation and control systems, auxiliaries, including seals flushes, gear boxes, water cooling harnesses and lube oil consoles.

23. All types of Tanks and Storages, including plate materials, flanges, fasteners, nozzles, fittings and other components for assembly/construction/erection at site, and instrumentations, including relief, breather, and rim vent values, nitrogen blanketing systems, roof drain pipings, rim seals, flame arrestors and automatic tank gauging systems, for oil, hydrocarbon (petroleum crude, products, by products, intermediate and blend components), water, chemicals, slops, sludge storage in either cone, fixed, floating, dome or internal floating roof configurations, solids storage in silos, bins or hoppers and LPG/propylene/ethylene/propane/butane storage in spheres, bullets or cryogenic tanks, and instrumentation and control systems.

24. All types of Columns, either supplied separately or together, comprising of grids, screens, distributors, nozzles and their supports/fasteners and accessories, for services like absorption, desorption, stripping, fractionation, distillation, splitting, stabilization, extraction, washing or scrubbing services, and column internals comprising of trays either bubble, jet, multi downcorner (MD) , sieve or valve trays, or either random or structured type packings, and their appurtenances, instrumentation and auxiliaries.

25. All types of Vessels and Drums, either supplied separately or together, comprising of shells, heads, internals, grids, screens, demisters, coalescers, boots, distributors, packing and their supports/fasteners and accessories, for storage, separation, reaction, mixing, decoking, degassing, flashing, draining, blow down, desuperheating, drying, sealing, receiving, surge and interface controlling services, and their appurtenances, instrumentation, insulation and auxiliaries.

26. All types of Reactors, either supplied separately or together, comprising of shells, heads, catalysts, support materials, grids, screens, demisters, coalescers, distributors, packings and supports/fasteners and accessories, for carrying out cracking (FCC Reactor and Spent Catalyst Stripper) , coking (Coke Drums) , visbreaking, hydrotreating, hydro desulphurization, hydrocracking, catalytic reforming (Platformer) , shift, sulphur (Claus) , adsorption (CBA, PSA) , oxidizing, treating (Merox) , regenerating (FCC Regenerator/Combustor) , desulphurising reactions, spray and mixing nozzles and their appurtenances, instrumentation and auxiliaries.

27. All types of Instrumentations, including various types of level/pressure/density/temperature/flow instruments, detectors, level/pressure/draft/temperature gauges, capacitance/level/limit, proximity switches, transmitters, annunciators, controllers, converters, transducers, temperature sensor assemblies, load cells, orifice assemblies, rotameters, pitot tubes, venturies, meter runs, control/metering panels, pneumatic/motorised/hydraulic/piston actuators, recorders, solenoid operated valves, transmitters, thermocouples, temperature elements, sight glasses, amplifiers, annubars, barriers / isolators, all types of flow meters, custody transfer meters, meter provers, density meters, electromechanical/magnetic/nuclear/radar/ultrasonic level indicators, weighing and bagging systems and test equipments for testing and calibration of above instruments.

28. All types of Transmitters and Monitors, including electronic transmitters for measurement of level, pressure, flow speed, temperature and weight, and monitoring systems for ambient air, fugitive emissions, pipelines, speed, stack emissions and vibration.

29. All types of Control Equipments, including ball/butterfly/gate/globe/needle/plug/bellow sealed type control valves, shutdown valves, self actuating, solenoid, on/off, fast acting quarter turn, pressure regulating, breather and pressure/vaccum relief valves, pilot operated safety valves, and valves for specialised services, such as catalyst addition systems and lock hopper control systems.

30. All types of Control Hardware and Software Systems, including Distributed Control Systems (DCS) , Emergency Shutdown Systems (ESD) , Programmable Logic Controllers (PLC) , Security and Access Systems, Terminal Automation Systems, Advanced Process Control (APC) Systems with Real Time Optimizer (RTO) , Supervisory Control and Date Acquisition (SCADA) Systems, and Refinery Information Management System (RIMS) with operator panels, computers, date loggers, interfaces, relay cabinets, engineering controls, large display screens, microwave transmission and receiver equipments, logic multipoint recorder/multiplexers, and their hardware and software

31. All types of Fire and Gas Detection Systems, consisting of LEL/fire/smoke/UV/gas/IR/toxic detectors, panels, cables, weather protection housing, junction boxes, detector cards, cabinets, calibration equipments, beacons and lights, and their hardware and software.

32. All types of Pipes, Tubes and Hoses, including cladded, coated, lined, made of carbon steel, low temperature carbon steel, alloy steel, stainless steel, GRP, copper, aluminium HDPE, PP, fibre glass, monel incolloy, titanium or any other materials, and other in seamless or welded construction, for all applications fields joint coating materials, with instrumentation and control systems like pipeline surge relief systems, auxiliaries, painting and insulation.

33. All types of Pipe Fittings, including elbows, connectors, tees, pipe fabrication accessories, spargers, nozzles, plugs, packing glands, rings, flanges, gaskets, supports, pads, manifolds, siphons, shock absorbers, struts, fasteners, mitre/long radius/short radius bends, sockolets, weldolets, spray nozzles, graylock fittings, swagelock/compression fittings, insulating kits, special steam traps, liquid float traps, bellows, flexible hoses, couplings, vent silencers, and speciality items like Teflon sliders, standpipe expansion joints, spring supports/hangers, scraper tees, pipeline and manifolds with valves, cleaning/scraping/monitoring pigs, pig launcher, pig receiver and pig detection system, cathodic protection system with sacrificial anodes and CP monitoring system, with instrumentation and auxiliaries.

34. All types of valves, including ball, butterfly, check, diaphragm, gate, double disc or knife gate,, globe bellow sealed globe, jacketed, plug, through conduit type valves, with manual/gear/motor/hydraulic operations, for oil, water, steam, hydrocarbon, chemical, cryogenic, subsea, nitrogen blanketing and thermic fluid services, and specialised services valves, like FCC butterfly valves, Cooker switch valves, standpipe slide valves, flue gas divertor valves, pressure reducing station systems, pipeleine and manifolds and riser tie-in manifolds.

35. All types of Gaskets and fasteners, including anchor/foundation/structural bolts, flanges, studs, nuts, washers, and metallic/soft/spiral wound gaskets and O-rings.

36. all types of Structural Steels, Materials and Plates including carbon steel/LT carbon steel/alloy steel/stainless steel plates, bars, rolled sections, tubular sections, HYSD bars, dampers, prefabricated tresties, pipe bridges with pre-installed pipes, loading platforms, steel A frames, blast proof doors, steel tubulars, seamless and welded, special steel piles, dolphins, low, medium and high strength steel, fasteners, and special application refractory/copalite/sulphide resistant quick setting cements.

37. All types of ferrous or non-ferrous pre-fabricated/semi-fabricated, Plant Structures, including pipe racks, supporting frames, trestles, pipe bridges with pipes pre-installed and pre-insulated.

38. All types of Analyzers, either on-line or off line, for measurement of pS, Oxygen, NOX, SOX, CO2, CO, hydrocarbon, dew point, density, conductivity, pH, combustible gases, oil in water, vapour pressure, silica, sodium, distillation, flash point, moisture, viscosity and smoke point, and analyzer sampling systems/cubicles, analyzer houses with sample conditioning systems, sample probes/sensors, tubings, HAVC systems, calibration gases cylinders and Drager tubes.

39. All types of Laboratory Equipments, including sampling, quality control and analytical equipments for testing and measurement of various petroleum crude/products/by products quality parameters, and including sample collection equipments, gas/ion chromatograph, CFR engines for octane and cetana number, pulse NMR, spectrophotometers of different types, distillation equipment systems, analyzer management systems and laboratory information management systems, with instrumentation, auxiliaries, hardware and software.

40. All types of Safety and Fire Fighting Equipments, for safety of personnel and plant and machinery including fire suits, fire monitors, Q.B. bulbs, spray nozzles, ambient air monitors, heat and flame resistant clothings, portable extinguishers, deluge skid systems, explosimeters, rupture discs, fire fighting systems, fire tenders, foam systems with foam storage and monitor, transport and booms, snorkels, sprinkler systems, breathing air apparatus, fire proofing materials for passive fire protection of steel structures and oil spill protection booms, with auxiliaries.

41. All types of Communication Equipments, including cables, bone mikes, frequency synthesizers, meteorological instruments, microwave transmission and receiving equipments, public address systems, intrinsically safe walkie-talkies, UHF/VHF multi-channel communication systems, radio telemetry systems, with remote telemetry units, portable units and PC based master telemetry units and antenna systems.

42. Initial charge of all types of catalysts, deslocants, zeolites, activated carbons, clay molecular sieves, used in refining and processing of petroleum crude, petroleum products and by-products.

43. Software Support Systems, including training simulation systems, electronic documentation systems, CAD stations, date tapes, operation/maintenance/safety manuals, scanners, plotters, printers, software including licenses, specifications, drawings, technical literature, and their hardware and software.

44. Special Maintenance Systems, including hydro-jetting tools, pneumatic torque wrenches, EOT/ mobile cranes, hoists, grinders, high pressure cleaning systems, induction bending machines, auto welding machines, various welding equipments like girth welding, vertical flux cord, bottom saw, four-side edge preparation, angle rolls, rolling and levelling machines, sky climbers, hot tapping machines, bolt tensioners, high pressure test pumps, tube bundles pullers, tube nippers, ultrasonic leak detectors, machine condition monitoring systems and associated sub-assemblies, vibration analysers and computerized alignments systems.

45. Sub-assemblies, tools, accessories, protective coating/ paint materials, stores, spares, materials, supplies, consumables for running, repairing or maintenance of the goods specified in this List.

List 18 (See S. No. 230 of the Table)

(1) Hot mix plant batch type with electronic controls and bag type filter arrangements more than 120 T/hour capacity

(2) Electronic paver finisher (with sensor device) for laying bituminous pavement 7 m size and above

(3) Slip form/fixed form paver finisher for laying concrete pavement

(4) Surface dressing equipment (self propelled) (chips spreader)

(5) Slurry seal machine for filling up cracks in roads

(6) Kerb laying machine

(7) Mobile bridge inspection unit

(8) Mechanical broom with blower

(9) Toll collection and traffic control equipment

(10) Electronic Total station instrument for topographic survey

(11) Global Positioning System (GPS) Instrument

(12) Stone crushing (cone type) plants

(13) Concrete Batching plants 50 cum/hr or more

(14) Hydraulically operated self propelled piling rig with accessories

(15) Hydraulically operated rough terrain self propelled 100 tons crane with telescopic boom

(16) Hydraulically operated self propelled soil boring equipment with casing pipes for deep earth anchor

(17) Mobile concrete pump placer of 90/120 cu m/hr capacity

(18) Automatic asphalt extraction equipment

(19) Fully automatic, hydraulically operated, pre-cast segment moulds

(20) Hydraulic gantry crane of 100 tonnes capacity for launching truss

(21) Skid steer loaders

List 19 (See S. No. 231 of the Table)

(1) Rail Mounted Quay Crane(RMQC) including Post Panamax RMQC

(2) Rubber Tyred Gantry Crane

(3) Rail Mounted Gantry Crane

(4) Marine loading/unloading arms

(5) Single Point Mooring and Single Buoy Mooring including pipelines

(6) Generator Engine with Alternator of 500 KVA and above

(7) Self-Priming centrifugal pumps of 1000 cu.m. and above

(8) Vessel Traffic Management System

(9) Trailing Suction Hopper Dredger

(10) Fire fighting system (water type and foam type)

(11) Davit, Work-Boat and Life Raft

(12) Navigational equipment

(13) Radio communication equipment

(14) Buoy light

List 19A (See S. No. 231A of the Table)

1. Marine Gear Box;

2. Electro-Hydraulic Steering Gear;

3. Communication System-VHF-RT;

4. Navigation Aids-GPS, Gyro, Radar and Navigational Lights;

5. Echo-sounder;

6. Oily Water Separator; and

7. Steerable Rudder/ Propeller

List 20 (See S. No. 232 of the Table)

(1) Navigational/ Communication Aids

(2) Airfield Crash Fire Tenders and other fire fighting vehicles

(3) X-Ray machines and other equipments needed for airport security systems

(4) Passenger Boarding Bridges (Aerobridges) along with associated Visual Guidance Docking Systems

(5) Elevated Transport Vehicles

(6) Baggage Conveyor System

(7) AC Plant of capacity more than 200 TR

(8) Escalators

(9) T-5 Triphosfor Tube

(10) Flight Inspection System (Ground and Air)

(11) Runway Marking and Pavement Testing Machines

List 21 (See S. No. 234 of the Table)

Omitted

List 22 (See S. No. 239 of the Table)

(1) Telephonic or telegraphic apparatus of the following description:

(a) Switching apparatus for cellular mobile telephone service

(b) Base station controllers

(d) Frame Relay Switches

(e) Ethernet Switches

(2) Apparatus for Carrier Current Line System or Digital Line System of the following description:-

(a) HDSL System

(b) Dense Wave Division Multiplexing (DWDM) System

(3) Radio communication equipment including VHF, UHF and � microwave communication equipment of the following description:-

(a) Base Transreceivers stations (BTS)

(b) Satellite communication equipment; the following customer premises equipment, namely:-

(i) Radio with LNA,up converters and down converters

(ii) Satellite modems

(i) Cellular repeaters

(ii) Amplifiers

(iii) Wave Guides

(4) Network management stations

(5) Computers for billing and customer services��

(6) Short message service hardware/ Voice mail service hardware

(7) Automatic call distribution system

(8) Transcoders

(9) Test equipment

Note: Goods specified against item 1(a) is to be imported only by Cellular Mobile Telephone Service Licensees.

List 23 (See S. No. 240 of the Table)

(1) Paging control terminal

(2) Transmitter controller

(3) Paging transmitter

(4) Link transmitter/link repeater, monitor receiver

(5) Link receiver

(6) N+1 Arbitrators for the above, hot standby panel

(7) Combiners� (8) Automatic monitoring system

(9) Network management & control system

(10) Integrated ACD/OAP system

(11) Isolators

(12) Cavity filters

(13) Multicouplers

(14) Directional power sensors

(15) Communication analysers (16) Radio communication test set up, spectrum analyser, field strength meter

(17) POCSAG or FLEX encoders

(18) Global positioning system

(19) Simul cast controller

(20) Automatic call distribution equipment/ system

List 24 (See S. No 241 of Table)

(1) Controller (Dispatch) of the following description:-

(a) Network Controller, Master Controller

(b) Line Conditioner for controller

(d) Processor Controller Frame, Shelves

(e) Network Interface Module

(f) Voice Tone Module

(g) Dispatch Application Processor

(h) Metro Packet Switch

(i) Digital Cross Connect Switch

(j) Advance Packet Duplicator

(k) Building Integration Timing System

(2) Telephonic or telegraphic apparatus of the following description, namely; Base Station Controllers

(3) Radio Communication equipment including VHF,UHF and Microwave communication equipment of the following description, namely; Base Transreceivers Stations (BTS)

(4) Trunked Repeaters(multiple repeaters required operations) -

(a) Repeaters,350/400/800Mh,20-100 Watts

(b) Line Interface Module

(d) Extender Card, extender cable

(e) Repeater Module Packing kit

(5) Antenna System equipment

(a) Tower top pre-amplifier

(b) Bi-directional amplifier

(6) Voting Equipment

(a) Voter Cable

(b) Audio Revert Option Kit

(d) SMC main site RDM

(e) Receiver Voter Module

(f) Remote Multiplexer Module

(g) Voter Diagnostic Module

(h) RDM Test Cable

(i) Satellite Power Supply

(j) Central demix Module

(k) Voter Shell Assembly

(7) Field Programming kit-

(a) Radio Interface Box (RIB)

(b) RIB to Repeater Cable

(8) Computer for billing and customer services

(9) Short Message Service Hardware

(10) Automatic Call Distribution System

(11) Transcoders

(12) Test equipment

(13) Mobile Switching Office (MSO)

List 25 (See S. No. 243 of the Table)

(1) Micromanipulators

(2) Molecular Beam Expitaxy System (MBE System)

(3) Chemical vapour deposition (CVD) system - Low pressure CVD (LP CVD) - Metal organic CVD (MO CVD)

(4) High pressure oxidation systems

(5) Lithography systems

(6) Direct step on wafers / steppers

(7) X-ray lithography systems

(8) E-Beam mask making system

(9) E-Beam direct write system

(10) Mask aligners

(11) Mask inspection systems (comparators)

(12) Wafer scriber or Wafer slicer or Wafer sawing machine or Wafer fractures or any combination thereof

(13) Die bonders or wire bonders or combination thereof

(14) Wafer sawing machine

(15) Leak detection system

(16) Clean room air showers��

(17) Particle monitor / counter both air and liquid borne

(18) Automatic encapsulation system, Automatic marking / branding machine

(19) Clean room laminar flow air handling system

(20) Ultra clean room equipment

(21) Ultra high purity demineralised water treatment plant

(22) PVDF welding and orbital welding machines

(23) Ultra high pure (UHP) gas distribution system

(24) Toxic gas distribution / monitoring system

(25) Fourier Transform Infra-red (FTIR) Spectrophotometer for measuring Epitaxy Thickness, Boron and Phosphorus weight percentage

(26) Parts of FTIR instrument

(27) Interferometer and nano-scan meter for measuring deposited metal or oxide thickness��

(28) Ellipsometer for measurement of refractive thickness, thickness of layers deposited on semi-conductor wafer

(29) De-Oxo purifiers and puridriers and Hydrogen, Nitrogen, Oxygen and Argon gases

(30) Hydrogen, Oxygen and Nitrogen gas generators and accessories for producing high purity process gases for semiconductor wafer/device manufacture

(31) Automatic lead frame loaders for semiconductor devices

(32) Mercury probing apparatus and accessories for measuring oxide purity and carrier concentration of semiconductor wafers

(33) Parts of mercury probing apparatus

(34) Fume scrubbers for toxic process gases used in semiconductor industry

(35) Apparatus for profiling and measurement of the surface including topography of semiconductor wafers and /or any layers deposited on it.

(36) Mass Flow Controllers (MFC) and Source Vaporiser for various process gases used in semiconductor wafer processing

(37) RF Generator for Epitaxial Reactors heating

(38) Parts of RF Generator

(39) Equipment used for quality control namely Burn-in Systems, moisture monitors and parts thereof

(40) Tools for Moulding, Cutting, Trimming operations used in the semiconductors manufacture

(41) Apparatus for the measurement of dynamic electrical parameters of Semiconductor wafer devices

(42) Apparatus for measuring physical parameters of junction in semiconductor wafter

(43) Automatic trim and form/die equipment for semiconductor devices

(44) Electro polished SS pipes, Swagelok fittings, nupro bellows valves, manual shut-off valves, non-return valves, high purity gas and chemical filters

(45) Optical pyrometer for measuring infra-red radiated temperature

(46) Gas Chromatograph/Analyzer for analysing purity of process gases

(47) Toxic gas monitors and Alarms

(48) Milli-Volt generator for temperature profiling of diffusion furnace used in semiconductor industry

(49) Curve Tracer for measurement of dynamic electrical parameters of semiconductor wafers/devices

(50) Apparatus for measurement of life time carriers/Switching time for semiconductor devices

(51) Contact Printer for photomask

(52) Die sheer Tester

(53) XRP Tester for inspection of the Moulded / Encapsulated devices for finding out the defects.

(54) Trace Moisture Analyzer / Dew point analyser for measuring moisture contents in PPMS

(55) UV light intensity measurement apparatus in semiconductor manufacture

(56) Critical Dimension measurement system for Mask making

List 26 (See S. No. 244 of the Table)

(1) Capacitors (excluding paper capacitors and power capacitors)

(2) Ferrite parts including memory cores and ferrite magnets

(3) Switches with contact rating less than 5 amperes at voltage not exceeding 250 Volts AC or DC

(4) Connectors

(5) Magnetic -Heads (all types)

(6) Deflection parts, namely: -

(i) EHT/ LOT/ FBT transformers

(ii) Line driver transformers

(iii) Deflection coil / yoke

(iv) Linearity coil

(v) Width coil

(7) Ceramic/ Magnetic cartridges and stylus

(8) Air cored and Ferrite cored transformers

(9) Microphones/ Microphone cartridges

(10) RF/IF coils, Inductance coils, Peaking coils, Tuning coils

(11) Antennas

(12) Relays of contact rating upto 7 amperes

(13) EHT cables

(14) Level meters/level indicators/ tuning indicators/ peak level meters/ battery meter/ VC meters / Tape counters

(15) Tone arms

(16) Microwave passive parts��

(17) (i) Saw filters (ii) Ceramic filter/trap (iii) Delay lines (iv) CRT socket (v) Spark gap (vi) Degaussing coil

(18) Fibre optics and other optoelectronic parts and devices namely, Couplers, Attenuators, Connectors, Splicers, Multiplexers and Demultiplexers

(19) Passive optical parts, namely, Microlens and splitters, Micropositioners, Optical filters and gratings and Phase plates

(20) Special purpose optical fibres, namely, polarisation holding fibres, plastic fibres and large core fibres

(21) Electron guns

(22) Liquid crystal displays

(23) Loudspeakers (cone type)

List 27 (See S. No. 245 of the Table)

(1) Television cameras with portable field video recorders (professional grade)

(2) Audio recording equipment

(3) Table top post production video editing machines

(4) Four source editing controllers to control editing machines

(5) 8-channel video mixer/switches

(6) Special effect generators for fading and superimposing of text and graphics

(7) Time base correctors / Frame synchronisers

(8) Broadcast standard 3-D computer graphic systems

(9) Professional grade colour video monitors

(10) Portable lighting equipment with lamps for shooting in low light situation

(11) Professional grade photographic cameras of all formats

(12) Dark room equipment including enlargers

(13) Computer control editing machines

(14) Spares and accessories of above mentioned equipment as permitted by the Deputy Principal Information Officer in the Press Information Bureau in the Ministry of Information and Broadcasting

List 28 (See S. No. 248 of the Table)

(1) UV/ Visible spectrophotometer, either with PDA and/ or kinetics measurement and low bandwidth,

(2) Preparative chromatographic system,

(3) Chiral columns and other HPLC columns for specific application,

(4) X-ray diffraction equipment,

(5) Capillary electrophoresis,

(6) Robotic sample processing system,

(7) Particle size analysers, laser diffraction, lights scattering and photocorrelation spectroscopy types,

(8) Atomic absorption Spectrophotometer,

(9) Tensiometer,

(10) Moisture balance,

(11) Elemental analyser,

(12) High Precision Auto titrator,

(13) TOC Analyser,

(14) Ion Chromatograph,

(15) Spectrofluorimeter.Luminescence meter,

(16) Parenteral particle counting system,

(17) Particle shape analyser,

(18) FT-NIR Spectrophotometer,

(19) FT-Raman Spectrophotometer,

(20) Spectropolarimeter,

(21) Adsorption gas apparatus,

(22) Freezing point apparatus,

(23) Hot stage microscope,

(24) Osmometer,

(25) Porosity analyser,

�(26) Sample preparation instrument,

(27) Automated sampling devices,

(28) Surface area analyser,

(29) Multiple organic synthesizer

(30) Focussed Microwave oven for ortoanic synthesis,

(31) Immersion cooling probe for 100 oc,

(32) High Pressure hydrogenator,

(33) Gas generators,

(34) Automated dissolution test apparatus, including robotics,

(35) Stability chambers conforming to ICH guidelines,

(36) Rotational visco meter and Rheometer,

(37) Assembly for lontophoresis studies,

(38) Ultra filteration equipment,

(39) Diffusion cell apparatus,

(40) Densitometer,

(41) Sustained release apparatus,

(42) Suppository testing device,

(43) Zeta potential analyser,

(44) Ultracentrifuge,

(45) Inverted microscope with fluorescence microscopy and photographic attachments,

(46) Transilluminator,

(47) Moodular protein electrophoresis apparatus (1D/2D),

(48) Nucleic acid sequencer,

(49) Imaging densitometer,

(50) Fast-protein Liquid Chromatography,

(51) U.V. Crosslinker,

(52) Probe Sonicator

(53) Sintillation counters (Y and B) , (54) CO2 incubator,

(55) Incubator shakedr for bacterial culture,

(56) Polymerase chain reaction machine,

(57) Cell harvestor,

(58) Speed Vac,

(59) Hybridizing oven,

(60) Protein sequencer,

(61) Confocal microscope,

(62) Capillary electrophoresis,

(63) Electroporator,

(64) Scanning electron microscope,

(65) Amino acid analyser,

(66) Peptide synthesizer,

(67) Phosphor imager,

(68) Fluorescence activated cell sorter,

(69) ELISA reader

(70) Fermenter,

(71) Spray drier,

(72) Protein purification set up,

(73) Stimulator,

(74) Two channel organ bath (with two channel recorder accessories) (a) Isotonic transducer (b) Isometric transducer (c) Pressure transducer,

(75) Plethymsometer,

(76) Blood pressure monitor,

(77) Blood pressure manual scanner,

(78) Auto analyser,

(79) Biofuge,

(80) Passive avoidance apparatus with controller,

(81) Auto stainer,

(82) Microtome,

(83) Cell harvestor,

(84) Tissue embedding machine,

(85) 4 channel auto track system,

(86) Blood cell counter,

(87) Blood flow meter,

(88) Stereo toxic microscope,

(89) Microdialysis (pull-push counter),

(90) Radiotelemetric monitoring system,

(91) High speed refrigerated research centrifuge,

(92) pH meter (3 decimal reading) ,

(93) Microscope phase contrast,

(94) Microscope polarizing,

(95) Vacuum rotary evaporators with digital display and control, different sizes,

(96) Freeze drier (Lyophilizer),

�(97) Precision pipetting devises, (98) Refrigerated bath,

(99) Low temperature circulatory bath (-33^oC),

(100) Magnetic stirrer with precision temperature control and digital display,

(101) Thermostatic blocks (Dry bath) with or without magnetic stirring facility

List 29 (See S. No 249 of Table)

Omitted

List 30 (See S. No. 250 of the Table)

(1) Singeing machine

(2) Fabric reversing machine

(3) Yarn drying machine

(4) Volumetric/Gravimetric measurement liquid chemical station

(5) Lab dye preparation machine

(6) Lab infra Red Drying Machine

(7) Continuous weight reduction machinery through microwave technique

(8) Kier decatising/ continuous decatising machine

(9) Solvent scouring machine

�(10) Blanket Fringing Machine

(11) Raising/Brushing Machine

(12) Circular Knitting Machine

(13) Industrial Sewing machine

(14) Single needle bed drop feed lockstitch machine

(15) Single needle lockstitch flat bed machine

(16) Single needle flat bed drop feed lockstitch machine with speed more than 3500 stitches per minute

(17) High speed twin needle feed lockstitch machine

(18) High speed two-needle lockstitch machine

(19) Computerised multineedle lockstitch/ chainstitch machine

(20) Single needle lockstitch machine with built in trimmer

(21) Blind stitch machine of various models

(22) Single needle drop feed chainstitch machine

(23) Two needle chainstitch or lockstitch machine

(24) Chainstitch overedging machine

(25) Two or three needle chainstitch machine

(26) Two thread chainstitch for high speed seaming and banding operation with gear driven pulled feed/ compound feed of speed 3500 stitches per minute and above.

(27) Safety stitch machine.

(28) Power driven flat bed knitting machine

(29) Computerised flat bed knitting machine

(30) Power operated flat lock/ overlock machine

(31) Linking machine

(32) Loop making machine

(33) Power driven socks knitting/ gloves knitting machine.

(34) Whole garment making machine (knitted)

(35) Plain stitching machine with more than 3500 stitches per minute

(36) Computerised plain stitching machine with more than 3500 stitches per minute

(37) High speed needle feed two needle flat bed industrial sewing machine.

(38) Sewing machine zigzag flat bed

(39) High speed multiple needle sewing machine

(40) Class feed of the arm industrial sewing machine.

(41) Button hole sewing machine

(42) Button stitch sewing machine.

(43) Elastic inserting machine (on a variety of garments)

(44) Belt attaching machine

(45) Zip attaching machine

(46) Bar tacking machine

(47) Hemstitch machine

(48) Smoking machine

(49) Power driven cloth-cutting machine.

(50) Band knife cutting machine

(51) Collar turning and blocking machine and cuff turning and blocking machine.

(52) Cuff Press

(53) New Automatic Collar Turning Machine

(54) Automatic Pocket Welt Sewing Machine or Automatic Pocket Welting Machine

(55) Pocket creasing machine

(56) Embroidery machine with 10 heads and above

(57) Computerised embroidery machine

(58) Printing and curing machine

(59) Quilting machine

(60) Snap fastners fixing machine and/ or siwa thereof

(61) Thread cleaning machine

(62) Steam Press

(63) Portable boiler for steam press

(64) Steam Cabinet

(65) Vacuum table

(66) Fusing press

(67) Dry to Dry cleaning machine

(68) Stain/ spot removing machine/ gun

(69) Automatic 25-needle shirring/ smoking machine

(70) Shirt folding machine

(71) Form finisher

(72) Collar contour trimmer

(73) Spreading machine

(74) Shoulder pad attaching machine.

(75) Shrinkage controlling machines for knitting fabrics

(76) Loop drivers for tubular knitted fabrics

(77) Mercerising machines for tubular knitted fabrics

(78) Singeing machines for tubular fabrics.

(79) Pile cutting machines for knitted fabrics

(80) Rotating edging machine for fabric rolls

(81) Conveyors for garments

(82) Garment Calendering machine

(83) Tie making machines

(84) Labelling machines

(85) Laying and cutting machines

(86) Button and Rivet fixing machine and/or dies thereof

(87) Weft straightening and calendering machine

(88) Slit Opening Machine

(89) Lab Yarn dyeing machine

(90) Lab dyeing machine

(91) Lab pressing machine

(92) Automatic cone winding machine with yarn splicer and auto doffing system

(93) Drawing in machine

(94) Computer aided design system

(95) Fully automatic grey fabric inspection machines with roll to roll winding having microprocessor recorder

(96) Colour matching computer

(97) High speed Intersecting Rotary/ Chain/ Pin Drawing Sets/ Gill Boxes

(98) Rectilinear Combs

(99) Draw Frame/ Roving Frame/ Automatic Rubbing Frame/ Bobbiners/ Finishers, for use in woollen textile industry

(100) Ring frames from 60 MM Ring Dia and above, for use in woollen textile industry

(101) Ring Frames with Siro Sp-inning attachment/ Auto Doffers having maximum 75 MM Ring Dia, for use in woollen textile industry

(102) Shearing, polishing and cropping machines

(103) Step cleaner

(104) Flax hackling machine

(105) Drawing machine for Flax

(106) Roving machine for Flax

(107) Wet ring frame for Flax

(108) Auto winding machine for Flax

�(109) Continuous spinning machines for Viscose Filament Yarn.

(110) Digital electronic frequency inverters for spinning machines including control boards

(111) Finishing oil metering pumps with relevant feed system

(112) Metering gear pumps for Viscose

(113) Portable systems for injection of pigments for viscose dope complete with stirred vessel, metering pumps, instruments and control panel

(114) Precious metal spinnerettes including distribution plates (pre-spinnerette)

(115) Spin bath degassinag plant by flash evaporation

(116) Spin bath backwash filtration system with candle filters

(117) Continuous dissolving and homogenisisng system for viscose preparation

(118) Contidisk filters for viscose

(119) Spinbath heat exchanger in graphite

List 31 (See S. No. 251 of the Table)

(1) Effluent treatment unit with biopaq reactor, activate sludge process, activated carbon, ultrafiltration ozonisation facilities

(2) Combined contipress/ decatising machine

(3) Effluent treatment unit with automatic sensing devices, automatic controlled chemical dosing, dissolved air floatation (DAF), reverse osmosis, sludge dewatering, decanters, ultrafilters, vacuum filters to deliver water for reuse.

(4) Hydraulic Flat Paper Press/continuous Hydraulic Flat paper Press/Rotary Press

(5) Fully fashioned high speed knitting machine

(6) Computerised Pattern maker/ Pattern grading/marker

(7) Computerised embroidery pattern-making machine with plotter

(8) High Speed Warping machine with yarn tensioning, pneumatic suction devices and accessories

(9) Shuttleless loom (air jet, water jet, rapier and projectile and narrow width high speed needle)

(10) Beam knotting machine

(11) Auto control type humidification plant

(12) Carding Sets, for use in woollen textile industry.

(13) Yarn/ Fabric mercerising�� machine

(14) Continuous bleaching plant

(15) Fabric dyeing machine complete with dye kitchen & accessories

(16) Wet fabric spreading and squeezing machine��

(17) Relax drum/ conveyer drying machine

(i) Drying range

(ii) Float dryer

(iii) Loop dryer

(iv) Drum dryer

(v) Jet dryer

(vi) Rapid dryer

(18) Compacting Machine

(19) HTHP Hosiery yarn dyeing machine complete with dye kitchen and accessories

(20) Soft package winders (dye package winders)

(21) Automatic dye weighing and dispensing machine

(22) Open width Tubular inspection machine

(23) Fastness testing equipment

(24) Shrinkage testing equipment

(25) Indigo dyeing range with/without sizing plant

(26) Computer colour matching equipment

(27) High speed computer control padding mangle

(28) Powder dot coating machine

(29) Laser Engraver or Inkjet Engraver

(30) Pre-shrinking range for flat and Knitted goods

(31) Knit-tubular mercerising or bleaching-cum-mercerising machine

(32) Auto flame controlled, width controlled singeing machine for flat and Knitted fabrics��

(33) Milling and scouring machine

(34) Shearing and Polishing machine

(35) Kier Decatising/Decatising machine

(36) Combined Contripress / Decatising machine

(37) Auto fabric detwister

(38) Rotary/ Flat bed screen printing machine

(39) Curing/ Polymerising machine

(40) Continuous rope/open width washing machine

List 32 (See S. No 252 of Table)

(1) Automatic reeling machinery for reeling of silk consisting of continuous hot air drier (conveyer type), continuous cocoon boiling machine(conveyer type) and automatic reeling machine with re-reeling

(2) Silk weaving and twisting machines consisting of hank-to-bobbin cone winders, silk doubling machine, two-for-one/ three-for-one twisters, vacuum autoclave and rewinding machine for bobbin to hank and Electronic jacquard weft knitting machine��

(3) Arm dyeing machine for hank degumming dyeing

(4) Hank dryers (continuous type)

(5) Silk felt calendar

(6) Clip stenter

(7) Silk calendar

(8) Silk decasting machine

(9) Overflow machine for silk fabric dyeing

(10) Cone-chees degumming and dyeing machine��

(11) Beam dyeing machine for silk fabric

(12) Semi-automatic screen printing machine

(13) Loop agers

(14) Design studio equipment

(15) Colour kitchen equipment

(16) Colour matching computer

List 33 (See S. No. 255 of the Table)

(1) Connecting rod assembly

(2) Crank 1,2 and 3

(3) Piston ring set

(4) Coil ignition

(5) Ignition coil assembly

(6) Pin piston

(7) Rod connecting

(8) Pin crank

(9) Gear adjustment

(10) Lever tilt 2

(11) Handle gear shift

(12) Carburettor assembly

(13) Pinion�

(14) Shift can assembly

(15) Lower casing assembly

(16) Propeller assembly

(17) Reed valve assembly

(18) Crank shaft assembly

(19) Fuel pump assembly

(20) Cowling bottom

List 34 (See S. No. 257 of the Table)

(1) Air blast dust removing machine

(2) All types of staking machines except slocum (slow combing process)

(3) Automatic Drying machine

(4) Automatic Lacing machine

(5) Automatic Leather Perforating and/or Punching machine

(6) Automatic Lock-Stitching Cylinder Bed Bartacker

(7) Automatic machine to control, to slant and to glue leather straps

(8) Automatic Milling machine

(9) Automatic Milling-Boring Machine

(10) Automatic or semi-automatic hydraulic press (750 tonnes or more)

(11) Automatic Padding machine

(12) Automatic Spraying machine

(13) Automatic Tacks - Reinforce machine

(14) Automatic Work Unit for assembling the complete Insole

(15) Back Part Moulding machine

(16) Band-saw with or without Flier

(17) Bandknife Splitting machine

(18) Belt Punching and cutting machine

(19) Bobbin machine with counter

(20) Boot leg ironing machine

(21) Bottom Leather Grain Crack Tester

(22) Bottom roughing and/or scouring machine

(23) Box Stamping machine

(24) Buckle Stappling machine

(25) Button Hole (Eyelets end) machine

(26) Button Sewing machine

(27) Button stitch/ Sewing machine

(28) Cementing machine

(29) Cementing machine and cementing gun

(30) Chain Slotting machine

(31) Channel Closing machine

(32) Channelling and Grooving machine

(33) Clicking Board levelling machine

(34) Clicking machine

(35) Clicking Machine Hydraulic (Bottom)

(36) Coloriemeter

(37) Column Boring machine

(38) Computerised Sewing Machine

(39) Computerised Skiving machine

(40) Conveyor system

(41) Counter Cementing Machine

(42) Counter Moulding machine

(43) Counter Tightening machine

(44) Coupling and edge pre-trimming machine

(45) Crimping machine

(46) Crumpling and embossing machine

(47) Curtain coating machine

(48) Cylinder Bed Sewing machine

(49) Die Bending machine

(50) Double Band Cleaning machine

(51) Dust removing machine-pneumatic/hydraulic ��

(52) Dyeing machine

(53) Edge buffing machine

(54) Edge Inking machine

(55) Edge Pre-Trimming machine

(56) Edge Setting machine

(57) Edge Trimming machine

(58) Elastic inserting machine on variety of garments

(59) Electrical machine for cutting and slanting straps

(60) Electro pneumatic weaving machine for leather

(61) Electronic skin assessor

(62) Embossing Plates for Press for leather printing

(63) Engraved rollers for Press for leather printing

(64) Evening and Roughing machine for Soles and Insolses

(65) Fibre Board Flexing machine

(66) Fine Turn machines for Lasts

(67) Finish Sheet Resistance Tester

(68) Finishing Machine for Lasts

(69) Fixed Head/Travailing Head Clicking Cutting machine

(70) Flat Bed Double Needle Sewing machine

(71) Flat Bed Single Needle Industrial Sewing machine with or without trimer

(72) Folding machine for brief cases and other leather products

(73) Folding machine for sides for Brief Case

(74) Forepart conditioning machine

(75) Frame Fixing/Frame Folding machine

(76) Fusing presses

(77) Halogen and Adhesive Application machine

(78) Hand Operated Press for Inserting Perforation Tubes and Prickers

(79) Heat Setting plant

(80) Heat transfer press

(81) Heel and Sole Brushing machine

(82) Heel and Sole Buffing machine

(83) Heel Attaching machine

(84) Heel Breast Cementing machine

(85) Heel breast roughing machine

(86) Heel Breasting machine

(87) Heel Building machine

(88) Heel Covering machine

(89) Heel Molder Flanger

(90) Heel Nailing machine

(91) Heel profiling machine

(92) Heel seat and side lasting machines

(93) Heel Seat Cement Lasting machine

(94) Heel Trimming / pretrimming / Cupping or combined machine

(95) High Speed Corner Stitching machine

(96) Hole punching machine

(97) Hot Melt Applicators

(98) Humidifier for Uppers

(99) Hydraulic / Pneumatic sammying and /or setting machine

(100) Hydraulic automatic plating ironing machine

(101) Hydraulic Bending machine

(102) Hydraulic Fleshing machine

(103) Hydraulic Ironing and Embossing Press

(104) Hydraulic Scudding machine

(105) Hydraulic Setting machine

(106) Hydraulic Shaving machine

(107) Hydraulic Shearing machine

(108) Hydraulic Splitting machine

(109) Hydraulic Sulphide applicator

(110) Injection Moulding of PVC/ TPR/ EVA Soles, Inserts and Half Soles

(111) Injection Moulding press to produce Plastic shoe Lasts

(112) Insole Attaching machine

(113) Insole Backpart Stiffener Tester

(114) Insole Bevelling machine

(115) Insole Covering machine

(116) Insole moulding machine

(117) Ironing and Conditioning machine

(118) Kamborian Lasting machine

(119) Knife Grinding machine

(120) Knife making equipment for cold steel and forged steel

(121) Label stitching machine

(122) Last Turning machine

(123) Lastometer

(124) Leather buffing machine

(125) Leather cover cutting machine for Heels

(126) Leather Polishing machine

(127) Leather rolling machine

(128) Lining roughing machine

(129) Lining Trimming machine

(130) Loop closing machine

(131) Loose / Nailing machine

(132) Manual loop cutter

(133) Mckay Stitching machine

(134) Milling machine for shoe Uppers

(135) Moccasin Lining Trimming machine

(136) Moccasin Performing machine

(137) Motorised hides and skins stamping machine

(138) Moulds for rubber sole direct vulcanising press and PVC direct injection soling machine

(139) Multiple Row Upper Chain Stitching machine i.e. 3 Rows and above

(140) Three Needles for Small Arm Cylinder machine for Multiple Row Stitching

(141) Outsole Stitching machine

(142) Paste drying unit

(143) Pattern binding machine

(144) Pattern corner cutting and binding machine

(145) Pattern Grading machine

(146) Pattern making machine

(147) Pattern Perforator

(148) Pattern Plan

(149) Pattern scanner

(150) Pattern Scanning machine

(151) Piping machine for trimming and embellishment fixing machine

(152) Plan Computer Controlled Nesting System

(153) Pneumatic Broaching machine

(154) Pneumatic control moulder machine for buckles

(155) Pneumatic fusing machine for ironing fusible interlining

(156) Polishing machine

(157) Polyshanking machine

(158) Polyurethane / PVC / TPR Sole, Insole, Heel, Heel Tip Injection Moulding machine (single or multiple station)

(159) Pore part lasting machine

(160) Post Bed Double Needle Sewing machine

(161) Post Bed Single Needle Sewing machine

(162) Post Bed Single Needle under Edge Trimming

(163) Pounding or beating or ironing machine or combination of such machines

(164) Pre-lasting conditioner

(165) Preparing and polishing machine

(166) Pulling Over and Cement Lasting machine

(167) Pulling Over Machine

(168) Punches for model room

(169) Punches of all varieties

(170) Punching and / or eyeletting machine

(171) PVR/ TU/ EVA direct injection soling machine (DIP construction)

(172) Quilting machine

(173) Raised Cord Sewing machine

(174) Reactivating Plant for Shoe and Soles

(175) Recessing and Roughing Soles machine

(176) Recessing Welt machine

(177) Rotary Collection Unit

(178) Rotary Pigment Coating machine

(179) Rotary Printing machine

(180) Rough Turn machine for lasts

(181) Roughing machine for Plastic Blocks ��

(182) Roughing machinery for upper or soles or insoles

(183) Rubber sole direct vulcanising press (DVP construction)

(184) Satra Plan and Knife search

(185) Scissors Cutting machine for plate

(186) Scouring and Blending machine

(187) Screwing machine

(188) Seam Ironing machine

(189) Sectioning machine

(190) Sewing machine Cylinder Bed

(191) Sewing Machine for Ruffled Work and Genuine Moccasin

(192) Sewing Machine Zig Zag Flat Bed

(193) Shank/ Sole/ Counter reducing machine

(194) Shank Riveting machine

(195) Shears for cutting pattern

(196) Shears for Iron Bars

(197) Side Lasting machine

(198) Sidewall Roughing machine

(199) Skiving machine

(200) Slike Fastener Fatigue Tester

(201) Snap fasteners fixing machine with or without dies therefore

(202) Sole/ Heel/ Seat Roughing machine

(203) Sole Edge Recessing/ Shaping machine

(204) Sole Levelling machine

(205) Sole Stamping/ Embossing machine

(206) Soling Material Abrasion machine

(207) Spiral Cutting machine/ Cutting Press

(208) Spray Booths

(209) Stamping machine for Upper/ Lining/ Socks

(210) Steam Toe Press

(211) Stitch Marking Machine

(212) Strap/ Strip Cutting Machine

(213) Strap Folding Machine

(214) Stretching and drying machine with or without conveyor and toggles

(215) String Lasting Machine

(216) Strobel type Stitching Machine

(217) Studs Attaching Machine

(218) Suit Case Stitching Machine

(219) Tack heel seat lasting machine

(220) Tack Lasting machine

(221) Tack Side lasting machine

(222) Tanning and colouring drums

(223) Tapping and seam rubbing machine

(224) Testing Equipments, namely :- Flexometer / Upper material flexing machine, Tensometer / Lastometer, Permeometer / Upper leather water proofness tester, Penetrometer / Bottom Leather water penetration machine, Finish rub fastness tester, Upper leather abrasion resistance machine, Dome plasticity apparatus, Finish fleat resistance tester, Adhesion of finish tester, Leather shrinkage temperature determination apparatus, Wrinklometer, Bottom Leather grain crack tester, Electronic moisture meter, Dyeing and fumbling machine for laboratory, fibre board flexing machine, State of cure apparatus, Ross Flexing machines, Soling materials abrasion machine, Heel fatigue tester, Heel impact tester, Centilever tensiometer, Viewing box for assessing visible damage, Slide fastener fatigue tester, Insole backparts stiffness tester, shoe flexing machine, Break / pipness scale, Sole Adhesion tester, Safety Footwear impact tester, Rapid tear tester, Needle holding jig, Shoe lace adhesion machine

(225) Thermo cementing and folding machine

(226) Toe Cap Applicator Thermoplastic

(227) Top Lift Slugging machine (228) Transfer Arm

(229) Trimming/milling machine with or without polishing device

(230) Twin Needle, needle feedlock stitch sewing machine

(231) Twin Sole Attaching machine

(232) Two Needle Lock Stitching machine

(233) Unlasting machine

(234) Upper Cementing machine

(235) Upper Edge Inking machine

(236) Upper Embossing machine

(237) Upper Folding machine

(238) Upper Forming machine

(239) Upper Perforating machine��

(240) Upper Reinforcing machine

(241) Upper Seam Rubbing / Beating machine

(242) Vacuum Drying machine

(243) Vacuum forming machine for last with vacuum pump

(244) Vice for holding pattern

(245) Vision Lasting System for Toe Lasting machine

(246) Vulcanizing Press

(247) Welt (Rand) Attaching machine

(248) Aquamix for use in Tanning industry

(249) Prodomix for use in Tanning industry

(250) Microtan / Computan for use in Tanning industry

(251) Pneumatic press for engraving and marking ��

(252) Pneumatic staple gun for stapling insoles, heels and uppers

(253) Stapling machine for lows to upper on leather shoes

(254) Lighting assessment cabinet (for checking colour under different light conditions)

(255) CAD/CAM equipment for shoe designing and pattern engineering including software

(256) Bistep cutting machine

(257) Spiking machine

(258) Airhood with grinder

(259) Sock liner press

(260) Box folding machine

(261) Outsole plates

(262) Dust collector systems

(263) Shoe box making machine

(264) Splitting machine (fitted with electronic and computer devices, etc.)

(265) Moulds for leather footwear

List 35 (See S. No. 283 of the Table)

(A) Wireless Apparatus and accessories -

(1) HF, VHF, or UHF Transreceivers (combination of transmitter and receiver) meant for amateur frequencies with accessories in assembled or kit form

(2) VHF/VHF or VHF/UHF Repeater (combination of transmitter and receiver) meant for amateur frequencies with accessories in assembled or kit form

(3) Transvertor for amateur frequencies in assembled or kit form

(4) Grid Dip Oscillator, Radio Frequency Interference Filter, Balun Transformer, SWR bridge or reflectometer, Morse reader or Noise bridge

(5) Antenna with or without feeders/Antenna rotators for amateur frequencies

(6) Digital Frequency counter (upto 600 MHz) with accessories

(B) Parts -

(1) Transistors, diodes, integrated circuits/ chips, thermionic valves or vaccum tubes ��

(2) Toroidal cores, quartz crystals, relays, rotatory switches, ferrite beads

(3) Variable condensers, air-dielectric type

(4) Precision capacitors (fixed type) value (s) between 1pF to 5000 pF

(5) Spare nicad cells or pack, as required or used with thermionic valves or vacuum tubes or toroidal cores (in the case of hand held transreceiver)

(6) Slow motion tuning mechanism with or without dials.

List 36 (See S. No 359 of the Table)

Omitted

List 37 (See S. No. 363 of the Table)

(1) Australia Antigen RIA kit

(2) Cardiac catheters with guidewires; Coronary Stents and coronary stent systems for use with cardiac catheters

(3) Clips for aneurysms and clips applying forceps in Neuro-Surgery

(4) Cardio vascular sutures, including sternum steel sutures

(5) Cardiovascular special instruments, namely: - (i) Coronary perfusion cannulae (ii) Electrical or gas operated sternal cutter (iii) High pressure stop cocks and connectors for pressure recording (iv) Vascular bull-dog clamps (v) Vascular clamps (vi) Vascular needle holders (vii) Vascular scissors straight or angled (viii) Vascular tissue forceps

(6) Compressed air breathing apparatus complete

(7) D.C. Defibrillators for internal use and pace makers

(8) Laryngeal Mask / Endotracheal Tube

(9) Haemodialysors

(10) Heart lung machine ��

(11) Heart valve prothesis including valve frames

(12) Nebulized humidifier

(13) Hydrocephalus shunts

(14) Hyper-baric oxygen chamber

(15) Fogarty and embolectomy catheters

(16) Implantable cardiac pacemakers

(17) Intra-arterial catheters and guidewires and material for intervention radiology

(18) Intra-cardiac patches

(19) Nebulizers (excluding ultrasonic nebulizers and heat nebulizers)

(20) Omayya reservoirs for intraventicular investigation / therapy

(21) Operating sets for Percutaneous Nephrostomy and Percutaneous removal of kidney stones with continuous irrigation and suction with ultrasonic Lithotrite, etc.��

(22) Ostomy products (Appliances) for managing Colostomy, Illcostomy, Ureterostomy, Illeal Conduit Urostomy Stoma cases such as bags, belts, adhesives seals or discs or rolls adhesive remover, skin barriers micropore surgical tapes, bag closing clamps karaya seals paste or powder, irrigation sets, plastic or rubber faceplates, flanges, male or female urinary incontinency sets, skin gels, in parts or sets

(23) Oxygenator

(24) Plastic disposable 3-way connectors

(25) Portable intermittent positive, pressure breathing apparatus

(26) Pulmoflator

(27) Respirators including ventimeters

(28) Sengstaken tubes

(29) Tracheostomy tubes

(30) Ventilator used with anaesthesia apparatus

(31) Vascular grafts

(32) Tracheostomy tube of plain PVC, Low pressure PVC, Red Rubber Plain, and Red Rubber cuffed

(33) Various types of Cardiac Catheters including balloon tipped, double Lumen and PTCA catheters, balloon dilatation catheters and Endomyocardial biopsy forceps

(34) Disposable and non-disposable cannula for aorta, vena cavae and similar veins and blood vessels and cannula for intra-corporal spaces

(35) Programmer for pacemaker

(36) Ancillaries for blood component therapy required for the treatment of cancer, namely, Y type blood solution recipient set, Transfer pack 1000 ml. and 300 ml., disposable pherasis bowl 225 ml. and 373 ml., wasting harness with bypass, and waste bags

(37) AIDS (Acquired Immune Deficiency Syndrome) test kits, Enhanced luminescene analysers for AIDS, Hepatitis and other Analyses

(38) Iridium wire

(39) Anti-HLA sera (AB-CDR)

(40) T.P.H.A. Kits and AIDS diagnostic kits

(41) Gamma knife

(42) Bone Marrow Transplant Equipment including silastic long standing intravenous catheters for Chemotherapy

(43) Cell Separator

(44) Pressure Transducer and Pressure Amplifier

(45) Cell Saver (46) Craniotome (Pneumatic and Electric Equipment) and Drills

(47) Binocular Loupes

(48) Intra Aortic Balloon Pump

(49) Remote After Loading Brachy Therapy Equipment

(51) Dosimetry System

(52) Cell Saver Equipment

(53) Cell Washer

(54) Thawer Equipment for Blood Warming

(55) Mammography Unit

(56) O₂Concentrator

(57) Ventricular Assist Device

(58) Pace Maker

(59) Activated Clot Time Machine

(60) Cobalt Therapy Unit

(61) Colour Doppler Ultrasound Scanner

(62) SPECT Gamma Camera

(63) Deep Therapy Unit

(64) Cardiac and Vascular Angiography System including Digital substraction Angiography

(65) Pulse Oximeter

(66) Blood Gas Analyser (including cartridges, if any), Sodium Potassium Analyser, Auto Analyser for enzymes, drug levels and bio-chemical investigations, or a combination of two or more of the aforesaid

(67) Ultrasonic Surgical Aspirator

(68) Intra Cranial Pressure Monitoring Equipment

(69) Radio Therapy Simulator

(70) Treatment Planning System

(71) Angiography Contrast Agent

(72) Image Intensifier

(73) Magnetic Resonance Imaging System

(74) Surgical Laser

(75) Electro Hydraulic Operating Table for Cardio Throacic and Neuro Surgery

(76) Implants for pain relief and bladder control

(77) Artificial electronics larynx instruments

(78) Ventilators other than those used with anaesthesia

(79) Digital Video EEG System

(80) Instruments and implants for severely physically handicapped patients and joints replacement and spinal instruments and implants including bone cement

(81) Small portable pumps used for giving slow infusion of anti-cancer drugs or thalassaemic drugs

(82) Fibre optic endoscopes including, Paediatric resectoscope/ audit resectoscope, Peritoneoscopes, Arthoscope, Microlaryngoscope, Fibreoptic Flexible Nasal Pharyngo Bronchoscope, Fibreoptic Flexible Laryngo Brochoscope, Video Laryngo Brochoscope and Video Oesophago Gastroscope, Stroboscope, Fibreoptic Flexible Oesophago Gastroscope.

(83) Cardiac electrophysiology system, stimulator and Radio Frequency (RF) Generator

(84) Fully Implantable and programmable Infusion Pump

(85) Neuro Stimulation Systems for pain management

(86) Devices and accessories for beating heart surgery (Tissue stabilizer and heart positioner)

(87) Micro-Electrode Recording System for deep brain stimulation surgery

(88) Cardiac Ablation System including Radio frequency ablation system

(89) Ruthenium-106 Ophthalmic Applicator

(90) Neuro Stimulator and therapy controller for tremor control therapy

(91) Image Guidance System for neurosurgery (during operation)

(92) Helical/ Spiral C.T.Scanner with Laser Camera and accessories

(93) Centrifugal Pump for Extra Corporeal System

(94) Automated blood culture/bacteriological identification and susceptibility systems (including that for mycobacterium tuberculosis)

(95) Peripheral Stents (flexible bridge stents including iliac stent, renal stent, aortic stent)

(96) Activated Clotting time Cartridges

(97) Insulin Pump

(98) Intra Coronary Shunts

List 38 (See S. No. 367 of the Table)

Ophthalmic equipment, namely: -

(1) Ophthalmoscope-Direct/ Indirect

(2) Ophthalmic/ Xenon Arc

(3) Flurescein Angiography Equipment including Fundus Camera��

(4) Ultrasonic Equipment (A scan/ Pacchy meter)��

(5) Microsurgical needles, cannulas, blades, trephine blades, membrane peelers, diathermy probes, vitreous cutters, atraumatic needles and sutures, intraocular scissors and forceps��

(6) Tonometer (Schiotz/ Applanation / Pneumo)��

(7) Retinoscope streak/ spot��

(8) Operating glasses (2X, 4X, 6X) / Binomag��

(9) Gonioscope, 3 mirror lens, special lenses for laser delivery, special diagnostic lenses (14D, 20D, 90D), Endo lens��

(10) Sterilisers (high speed / ethylene)��

(11) Specular microscope with monitor and recorder��

(12) Intraocular lenses/ Keratoprosthesis / orbital implants

(13) Diathermy equipment��

(14) Synoptophore��

(15) Silicone Sponges/ rubber / bands, for Retinal Detachment Surgery��

(16) Vitrectomy equipment��

(17) Phaco-emulsification system

(18) Visual field recording equipment��

(19) Ocular electro physiological testing equipment [Electroretinography / Electroculography / Visually evoked response equipment (ERG/EOG and VER)]�

(20) Keratometer / Automatic Keratometer��

(21) Prism bars��

(22) Laser Interferometer��

(23) Pacchymeter - optical / electronic��

(24) Aspiration - irrigation equipment

(25) Automatic refractometer or lensometer / projection lensometer or a combination of the aforesaid

(26) Complete refraction unit with phoropter / projection - chart�

(27) Ophthalmic hydraulic chair

(28) Low visual aids and sets (telescopic glasses)��

(29) Colour vision testing equipment��

(30) Photoelectric keratoscope and thermokeratoscope��

(31) Pseudo-isochromatic chart book / Ishiare��

(32) Slit lamp biomicroscope / photo slit lamp��

(33) Surgical operating zoom microscope with closed circuit TV camera��

(34) Surgical operating microscope manual��

(35) Argon / krypton laser��

(36) Yag laser, excimer laser or diode laser

List 39 (See S. No. 368 of the Table)

ENT equipment, namely: -

(1) Otoscope

(2) Impedance Audiometer

(3) BERA (Brain Evoked Response Audiometry)

(4) Speech Audiometer

(5) Surgical Operating Microscope

(6) Fresnel�s glasses

(7) Magnifying Operating Glasses (Magnifying Loupes)

(8) Microsurgical instruments for all Ear surgeries

(9) Sialistic sheet used for Tympanoplasty operations

(10) Sinoscopes 0^0, 30⁰, 70^0, 120⁰ (2.6 mm and 4 mm diameter)

(11) Instruments for Endoscopic Sinus Surgery

(12) CCD Camera, Monitor, VCR to fit with Sinoscopes

(13) Cochlear Implants and equipment for performing Cochlear

(14) Voice Prostheses

(15) Blom Singer Voice Prostheses

(16) Electronic Larynx

(17) Sigel�s Speculum

(18) Microlaryngeal instruments��

(19) Video Processor

(20) Video Cassette Recorders used along with the Video Endoscope

(21) ENT Burrs

List 40 (See S. No. 369 of the Table)

(1) 12 (+/- 1) mm Laparoscope (Single incision)

(2) Falope Ring - applicator single incision (for two rings) and procedure instruction manual, kit containing guide and loader and cleaning brush

(3) 12 (+/- 1) mm Trocar (including piston type) with spare washers for sleeve and canulae and cleaning brush

(4) Fibre Optic Light Cable

(5) Bulbs, fuse lamps, Adapter for Fibre Optic Light Cable/ Laparoscope

(6) Carbondioxide (CO₂) cylinder with pneumoperitoneum apparatus

(7) Light Source

(8) Machine for Gas Insufflator with Gas Tubing Spare Carbondioxide (CO₂) Hose Pipe and a Gauge

(9) Dual incision applicator Two rings

(10) Trocal and Cannula 6-8 mm with valves gas stopcock

(11) Probe 34-37 cm

(12) Verres Needle (4� and 5¹/₂�)

(13) Minilight source with accessories consisting of: -

(a) 6 volts rechargeable battery

(b) AC battery charger

(d) Inter-connection assembly

(e) Convertor��

(14) Falope Rings

(15) 6-8 mm Laparoscope (double puncture)

(16) Scissors 34-37 cm

(17) Suction Cannula 34-37 cm

Notes:

(A) Item Nos.(6) , (7) and (8) may be imported separately or in combinations as dual control assembly.

(B) Item Nos. (1) and (2) may be separate or in combination, when in combination, it is called Laparocator.

List 41 (See S. No. 370 of the Table)

(A)

(1) Braille writers and Braille writing instruments

(2) Hand writing equipment Braille Frames, Slates, Writing Guides, Script Writing Guides, Styli, Braille Erasers

(3) Canes, Electronic aids like the Sonic Guide

(4) Optical, Environmental Sensors

(5) Arithmetic aids like the Taylor Frame (arithmetic and algebra types), Cubarythm, Speaking or Braille calculator��

(6) Geometrical aids like combined Graph and Mathematical Demonstration Board, Braille Protractors, Scales, Compasses and Spar Wheels

(7) Electronic measuring equipment, such as calipers, micrometers, comparators, gauges, gauge blocks Levels, Rules, Rulers and Yardsticks

(8) Drafting, Drawing aids, tactile displays��

(9) Specially adapted clocks and watches

(B)

(1) Orthopaedic appliances falling under heading No.90.21 of the First Schedule

(2) Wheel chairs falling under heading No. 87.13 of the First Schedule

(D) Artificial electronic ear (Cochlear implant)

List 42 (See S. No. 400 of the Table)

Omitted

List 43 (See S. No. 401 of the Table)

1. Tarapur Atomic Power Plants �3 and 4 (Maharashtra) � 1000 MW

2. Kudankulam (Tamil Nadu) � 2000 MW

3. Kaiga � 3 and 4 (Karnataka) � 440 MW

4. Rajasthan Atomic Power Project- Units 5 and 6 (Rawatbhata) - 440 MW

5. Prototype Fast Breeder Reactor (Kalpakkam) �500 MW.

List 44 (See S. No. 424 of the Table)

1. 765 Kv Transformers;

2. 765 Kv Reactor;

3. 765 Kv Circuit Breaker;

4. 765 Kv Isolators;

5. 765 Kv Current Transformer;

6. 765 Kv Capacity Voltage Transformer;

7. 765 Kv Surge Arrestors;

8. Invar/Acss Conductor For High Temperature Application;

9. Polymer Long Rod Insulators;

10. Emergency Restoration System (Ers) For Extra-High Voltage Transmission Line;

11. Overhead Optical Ground Wire (Opgw), Including Hardware And Accessories Such As Vibration Damper, Joint Box, Suspension And Tenslon Clamps;

12. High Voltage Dc Divider And Ct;

13. High Voltage Dc Reactor;

14. High Trv Circuit Breaker For High Voltage Dc Application;

15. Protective Spark Gap And Damping Equipment For Thyristor Controlled Series Compensator (Tcsc)/ Fixed Series Compensator (Fsc);

16. Thyristor Controlled Series Compensator (Tcsc)/ Fixed Series Compensator (Fsc) Mov For Series Compensation;

17. Optical Current Transformer;

18. 400 Kv Extra High Voltage Cables;

19. Gas Insulated Switchgear Equipment For 220 Kv And Above;

20. Thermo Vision Camera;

21. On-Line Puncture Insulator Detector;

22. Hot Line Kits And Tools For Transmission Line Live Maintenance;

23. Hot Line Washing Equipment For Insulators.

List 45 (See S. No. 425 of the Table)

Textile Machinery For Man-Made Or Synthetic Fibre And Yarn Industry: -

(1) Machinery For Continuous Polymerization Plant:

(A) Polymerizing Equipments, Including Esterification Reactor, Vapor Separator, Pre-Polymerization Reactor, Polymerization Reactor, Static Mixers, Polymer Pumps And Automatic Chipping System;

(B) Slurry And Additive Preparation System, Including Preparation Unit;

(D) PTA Conveying System, Including Container Unloading Platform And Rotary Feeders;

(E) Polymer Transfer Line Equipments, Including Polymer Coolers And Jacketed Polymer Pumps;

(F) Solid State Polymerization Equipments, Including Pre-Crystalliser, Crystalliser And Rotary Feeders;

(G) Process Control Equipments, Including Viscosity Measuring Equipment (Viscometer) And, Distributed Control System;

(H) Atomic Absorption Spectrometer, X-Ray Fluorescence Spectrometer;

(2) Machinery For Polyester Staple Fiber Plant:

(A) Spinning Equipments, Including Manifold Spinning Beams, Pre-Heating Ovens And Finish Applicators;

(B) Polymer Transfer Line, Including Extruder, Color Blender And Continuous Polymer Filter (CPF);

(C) Draw-Off Equipment, Including Take-Up Equipment, Thread Cutters And Aspirators, Spin Defect Detectors, Draw Off Unit, Tow Guide Equipment, Lace-Up Or Suction Gun And Tow Suction Unit;

(D) Draw Line (Fibre Line), Including Creel, Tow Guide Stand, Draw Frames, Drawing Bath, Heat Set Calender/ Thermosetting/ Annealer Unit, Tow Assembler, Draw-Off Unit, Tensiometer Roll, Steam Box, Crimping Machine, Spray Box, Tow Guide System, Cable Dryer, Tow Cutter And Grinding Machine And Tow Cutter Reels;

(E) Hydraulic Baling Press, Strapping Machine, Dock Levelers And Automatic Bale Handling Equipment;

(F) Process Control Equipments, Including Precision Anemometer, Thermo-Hygrograph, Aspiration Psychrometer, Ultrasonic Cleaning Unit, Spinneret Inspection System, Infrared Pyrometer, Optical Temperature Measuring Instrument;

(G) Textile Laboratory Equipments For Fibre Testing, Including Favimat, Fafegraph HR, Coring Machine, Stereo Microscope, Crimper Tester, Fibre Shrinkage Tester, Refractometer, Conductivity Meter;

(3) Machinery For Polyester Filament Yarn Plant:

(A) Spinning Equipment, Including Manifold, Spinning Beams And Pre-Heating Ovens;

(B) Polymer Transfer Line, Including Extruder, Color Blender And Continuous Polymer Filter (CPF);

(C)Take-Up Equipment, Including Take-Up Frames, Oil Application Unit, Godet Rollers, Yarn Guides, Thread Cutters And Aspirators, Lace-Up/Suction Gun, Take-Up And Draw Winders;

(D) Packing And Automation Equipment, Including Automatic Doffers, Automatic Bobbin Storage And Handling System;

(E) Draw Texturising Machine, Including Creel, Intermingling Jets, Ceramic Guides, Doffers;

(F) Textile Laboratory Equipments For Yarn Testing, Including Automatic Tensile Tester, Projection Microscope, Denier Skein Reel, Entanglement Tester, Denier Auto Count, Dynafil, Uster Tester, Online Finish Checking Instrument.

List 46 (See S. No. 426 of the Table)

(A) Sewing Machines With In-Built Motors, Falling Under Tariff Item 8452 29 00

(B) Machinery For Garment Sector, Namely: -

(1) Garment Sand Blasting Or Brushing Machine;

(2) Hook And Bar Machine;

(3) Hydro-Extractor Machine;

(4) Garment Washing Machine Falling Under Tariff Item 8450 20 00;

(5) Waistband Attaching Machine;

(6) Label Or Tag Inserting Machine;

(7) Profile Cutting Machine

(1) Precision Coating Heads

(2) Turret Winder And Unwinders

(3) Coating Equipment For Scrim Fabrics

(4) Multi-Colour Roto Gravure Printing Machine For Coated Fabrics

(5) Printing Equipment For Sineage For Coated Or Laminated Fabrics

(6) Grommet Fixing Machine

(7) Ultra Sonic, Hot Air And Wedge RF/Laser Polymetric Sealing Machine

(8) Weatherometer

(9) Automatic Thickness Gauze

(10) Puncture Resistance

Table

Description of goods

ANNEXURE

FORM

Omitted

Omitted

Omitted

Omitted

Omitted

Get Sample Now

Exim News

What is New?

Home

Indian Customs

DGFT

Central Excise

Exim Guide