GOVERNMENT OF INDIA
MINISTRY OF FINANCE
(DEPARTMENT OF REVENUE)
New Delhi, dated the 17th March, 2012
Notification No.12 /2012 –Customs
G.S.R. (E).- In exercise of the powers conferred by sub-section (1) of section
25 of the Customs Act, 1962 (52 of 1962) and in supersession of the notification
of the Government of India in the Ministry of Finance ( Department of Revenue),
No. 21/2002-Customs, dated the 1st March, 2002 Published in the Gazette of India,
Extraordinary, Part II, Section 3, Sub-section (i), vide number G.S.R. 118(E) dated
the 1st March, 2002, except as respects things done or omitted to be done before
such supersession, the Central Government, being satisfied that it is necessary
in the public interest so to do, hereby exempts the goods of the description specified
in column (3) of the Table below or column (3) of the said Table read with the relevant
List appended hereto, as the case may be, and falling within the Chapter, heading,
sub-heading or tariff item of the First Schedule to the Customs Tariff Act, 1975
(51 of 1975) as are specified in the corresponding entry in column (2) of the said
Table, when imported into India,-
(a) from so much of the duty of customs leviable thereon under the said First
Schedule as is in excess of the amount calculated at the standard rate specified
in the corresponding entry in column (4) of the said Table;
(b) from so much of the additional duty leviable thereon under sub-section (1)
of section 3 of the said Customs Tariff Act 1975 (51 of 1975) as is in excess of
the additional duty rate specified in the corresponding entry in column (5) of the
said Table, subject to any of the conditions, specified in the Annexure to this
notification, the condition number of which is mentioned in the corresponding entry
in column (6) of the said Table:
Table
Table S. No.
|
Chapter or Heading or sub–heading or tariff item
|
Description of goods
|
Standard rate
|
Additional duty rate
|
Condition No.
|
(1)
|
(2)
|
(3)
|
(4)
|
(5)
|
(6)
|
1.
|
1
|
Animals and birds imported by zoo
|
Nil
|
-
|
-
|
2.
|
1
|
Cows, heifers, bulls, goats, sheep, pigs, angora rabbits, ducklings and
pureline poultry stock
|
5%
|
-
|
-
|
3.
|
1
|
Grand parent poultry stock and donkey stallions
|
25%
|
-
|
-
|
4.
|
0302 or 0303
|
Atlantic salmon
|
10%
|
-
|
-
|
5.
|
0303
|
Tuna bait
|
Nil
|
-
|
-
|
6.
|
030616 or 030617
|
Live SPFL. vannamei broodstock
|
10%
|
-
|
-
|
7.
|
040210 or 04022100
|
Goods upto an aggregate of fifty thousand metric tonnes of total imports
of such goods in a financial year.
|
Nil
|
-
|
1
|
8.
|
0405
|
Butter, ghee and butter oil
|
30%
|
-
|
-
|
9.
|
0405
|
White butter, butter oil, anhydrous milk fat upto an aggregate of fifteen
thousand metric tonnes of total imports of such goods in a financial year.
|
Nil
|
-
|
1
|
10.
|
04069000
|
All goods
|
30%
|
-
|
-
|
11.
|
5
|
Pancreas
|
5%
|
-
|
-
|
12.
|
0508 00
|
Conch shell
|
5%
|
-
|
-
|
13.
|
0508 00 10
|
All goods
|
Nil
|
-
|
-
|
14.
|
051191
|
Artemia cyst, including wet artemia cyst
|
5%
|
-
|
-
|
15.
|
05119911
|
Artemia
|
5%
|
-
|
-
|
16.
|
05 or any other Chapter
|
The following goods, namely:-
(1) Frozen semen;
(2) Frozen semen equipment, namely:-
(a) flasks, refrigerators, vessels, jars or dewars, and their accessories;
(b) Plastic insemination sheath and insemination guns; and
(c) Weaton ampoules and straws for freezing semen
|
5%
|
-
|
-
|
17.
|
06, 07, 08, 09 or 12
|
Planting materials, namely, oil seeds, seeds of vegetables, flowers and
ornamental plants, tubers and bulbs of flowers, cuttings or saplings of
flower plants, seeds or plants of fruits and seeds of pulses
|
5%
|
-
|
2
|
18.
|
0601 or 0602
|
All goods
|
5%
|
-
|
-
|
19.
|
0703 10
|
All goods
|
Nil
|
-
|
-
|
20.
|
0713
|
Pulses
|
10%
|
-
|
-
|
21.
|
0713
|
Pulses
|
Nil
|
-
|
-
|
22.
|
08013100
|
Cashew nuts in shell
|
Nil
|
-
|
-
|
23.
|
0802 12 00
|
All goods
|
Rs. 65/- per kg.
|
-
|
-
|
24.
|
08025000
|
All goods
|
10%
|
-
|
-
|
25.
|
08026100, 08026200, 08027000 or 08029000
|
All goods (excluding areca nuts also known as betel nuts)
|
30%
|
-
|
-
|
26.
|
0804 1020, 0804 1030
|
All goods
|
20%
|
-
|
-
|
27.
|
0805 10 00, 0805 50 00, 0806 10 00 or 0808 20 00
|
All goods
|
30%
|
-
|
-
|
28.
|
0806 20
|
All goods
|
100%
|
-
|
-
|
29.
|
08062010
|
Sun dried dark seedless raisin
|
30%
|
-
|
-
|
30.
|
0810 60 00 or 0810 90
|
All goods, other than black, white or red currants and gooseberries
|
15%
|
-
|
-
|
31.
|
0904 11 10
|
Long pepper (Piper longum)
|
30%
|
-
|
-
|
32.
|
0907
|
All goods
|
35%
|
-
|
-
|
33.
|
1001
|
All goods other than meslin
|
50%
|
-
|
-
|
34.
|
1001 1900 or 1001 99 10
|
Wheat
|
Nil
|
-
|
-
|
35.
|
1001
|
Meslin
|
Nil
|
-
|
-
|
36.
|
1005 10 00, 1007 or 1008 21,1008 29
|
All goods
|
50%
|
-
|
-
|
37.
|
1005 90 00
|
Goods upto an aggregate of five lakh metric tonnes of total imports of
such goods in a financial year
|
Nil
|
-
|
1
|
38.
|
1005 90 00
|
All goods other than those specified against S. No. 37
|
50%
|
-
|
-
|
39.
|
11071000
|
All goods
|
30%
|
-
|
-
|
40.
|
1207 91 00
|
All goods
|
20%
|
-
|
-
|
41.
|
1209
|
All goods (other than those falling under sub-headings 120991 and 120999)
|
15%
|
-
|
-
|
42.
|
120991 or 120999
|
All goods
|
5%
|
-
|
-
|
43.
|
1211 30 00, 1211 40 00 or 1211 90
|
All goods (other than liquorice roots)
|
15%
|
-
|
-
|
44.
|
1301 90
|
Seed lac
|
5%
|
-
|
-
|
45.
|
1301 90 13
|
Asafoetida
|
20%
|
-
|
-
|
46.
|
1301 90 22
|
All goods
|
20%
|
-
|
-
|
47.
|
1301 90 49
|
Oleopine resin
|
5%
|
-
|
-
|
48.
|
1302 19 or 1302 20 00
|
All goods (other than vegetable seeds and extracts of pyrethrum or of
the roots of plants containing rotenone)
|
15%
|
-
|
-
|
49.
|
1401 10 00
|
Bamboo for use in the manufacture of agarbatti
|
10%
|
-
|
-
|
50.
|
15.
|
Edible oils falling under headings 1508, 1512, 1513, 1514,1515 or sub-heading
1511 10
|
85%
|
-
|
-
|
51.
|
15.
|
I. The following goods, other than of edible grade, namely:-
(A) Crude palm stearin having Free Fatty Acid (FFA) 20 percent or more
and falling under heading 1511, imported for manufacture of soaps, fatty
acids and fatty alcohols by a manufacturer having plant for splitting up
of such oils into fatty acids and glycerols
(B) All goods (except crude palm oil and crude palm stearin) having Free
Fatty Acid (FFA) 20 percent or more and falling under heading 1507, 1508,
1509, 1510, 1511, 1512, 1513, 1514 or 1515, imported for the manufacture
of soaps, industrial fatty acids and fatty alcohol by a manufacturer having
plant for splitting up of such oils into fatty acids and glycerols
(C) All goods (except crude palm oil), having Free Fatty Acid (FFA) 20
percent or more, and falling under heading 1507, 1508, 1509, 1510, 1511,
1512, 1513, 1514 or 1515 for the manufacture of soaps, industrial fatty
acids, and fatty alcohol
(D) All goods (except crude palm oil), having Free Fatty Acid (FFA) 20
percent or more and falling under heading 1507, 1508, 1509, 1510, 1511,
1512, 1513, 1514 or 1515
|
10%
12.5%
20%
65%
|
-
-
-
-
|
5
5
5
-
|
|
|
II. The following goods, of edible grade namely,-
(A) Crude palm oil falling under heading 1511, having an acid value of
4 or more and total carotenoid (as beta carotene) in the range of 250 mg/kg.
to 2500 mg/kg., in loose or bulk form for manufacture of refined oil, refined
palmolein, vanaspati, bakery shortening or inter-esterified fats
|
Nil
|
-
|
5
|
|
|
(B) Crude Palmolein falling under heading 1511, having an acid value
of 4 or more and total carotenoid (as beta carotene) in the range of 500
mg/kg. to 2500 mg/kg., in loose or bulk form for manufacture of refined
oil, refined palmolein, vanaspati, bakery shortening or inter-esterified
fats
(C) Fractions of crude palm oil (other than crude palmolein) falling
under heading 1511, having an acid value of 2 or more and total carotenoid
(as beta carotene) in the range of 500 mg/kg. to 2500 mg/kg., in loose or
bulk form
Explanation.-For the purposes of this entry, "Crude palm oil"
means fixed vegetable oils, fluid or solid, obtained by pressure, if they
have undergone no processing other than decantation, centrifugation or filtration,
provided that, in order to separate the oils from solid particles only mechanical
force, such as gravity, pressure or centrifugal force, has been employed,
excluding any absorption filtering process, fractionalization or any other
physical or chemical process. If obtained by extraction an oil shall continue
to be considered as "crude", provided it has undergone no change in colour,
odour or taste when compared with corresponding oil obtained by pressure
|
Nil
Nil
|
-
-
|
5
-
|
52.
|
15
|
Refined vegetable oils of edible grade, in loose or bulk form (other
than those falling under heading 1511)
|
85%
|
-
|
-
|
53.
|
15
|
Vegetable oils of edible grade, in loose or bulk form (other than those
specified against S. No. 52 and those falling under heading 1511), imported
for the manufacture of oil commonly known as "Vanaspati" or for refining
Explanation.-The expression "Vegetable oil" means-
(a) in the case of cottonseed oil, oil having a free fatty acid content
of at least 0.2%; and
(b) in the case of any other vegetable oil, oil with free fatty acid
content of at least 0.5%.
|
75%
|
-
|
4 and 5
|
54.
|
1505
|
All goods
|
15%
|
-
|
-
|
55.
|
15071000
|
All goods
|
Nil
|
-
|
-
|
56.
|
15079010
|
All goods
|
7.5%
|
-
|
-
|
57.
|
1508, 1509, 1510, 1512, 1513, 1514, or 1515
|
All goods, crude and edible grade
|
Nil
|
-
|
-
|
58.
|
1508,1509, 1510, 1512, 1513, 1514 or 1515
|
All goods, refined and edible grade
|
7.5%
|
-
|
-
|
59.
|
1511 90
|
All goods
|
7.5%
|
-
|
-
|
60.
|
1512 11
|
Crude sunflower seed or safflower oil upto an aggregate of one lakh and
fifty thousand metric tonnes of total imports of such goods in a financial
year
|
50%
|
-
|
1
|
61.
|
1512 11
|
All goods other than those specified against S. No. 60
|
75%
|
-
|
-
|
62.
|
15121110
|
All goods
|
Nil
|
-
|
-
|
63.
|
15121910
|
All goods
|
7.5%
|
-
|
-
|
64.
|
151419 or 1514 99
|
Refined rape, colza or mustard oil upto an aggregate of one lakh and
fifty thousand metric tonnes of total imports of such goods in a financial
year
|
45%
|
-
|
1
|
65.
|
1514 11 or 1514 91
|
All goods, edible grade
|
Nil
|
-
|
-
|
66.
|
1514 19 or 15 14 99
|
All goods, edible grade
|
7.5%
|
-
|
-
|
67.
|
1516 10
|
All goods
|
30%
|
-
|
-
|
68.
|
1516 20
|
All goods
|
80%
|
_
|
_
|
69.
|
1516 20
|
All goods, edible grade
|
7.5%
|
-
|
-
|
70.
|
1517 or 1518
|
All goods of edible grade
|
80%
|
-
|
-
|
71.
|
1517 10 21, 1517 90 10, 1517 90 20, 1518 00 11, 1518 00 21 or 1518 00
31
|
All goods, edible grade
|
7.5%
|
-
|
-
|
72.
|
1517 or 1518
|
All goods other than edible grade
|
30%
|
-
|
-
|
73.
|
1520 00 00
|
Crude glycerin
|
12.50%
|
-
|
-
|
74.
|
1520 00 00
|
All goods
|
20%
|
-
|
-
|
75.
|
1701
|
All goods
|
60%
|
-
|
-
|
76.
|
1701
|
Raw Sugar
|
Nil
|
-
|
3A
|
77.
|
1701
|
Refined or white sugar
|
Nil
|
-
|
3B
|
78.
|
1701
|
Raw sugar if imported by a bulk consumer
|
Nil
|
-
|
3C
|
79.
|
1702
|
Dextrose Monohydrate
|
20%
|
-
|
-
|
80.
|
1702
|
Lactose for use in the manufacture of homeopathic medicine
|
10%
|
-
|
5
|
81.
|
170211 or 170219
|
All goods
|
25%
|
-
|
-
|
82.
|
1703
|
All goods
|
10%
|
-
|
-
|
83.
|
1704 10 00
|
All goods
|
30%
|
-
|
-
|
84.
|
1806 90
|
Food preparations, for infant use and put up for retail sale, of–
(i) goods of headings 0401 to 0404, containing cocoa calculated on a
totally defatted basis, in a proportion by weight of 5% or more but less
than 10%; or
(ii) flour, meal, starch or malt extract containing cocoa calculated
on a totally defatted basis, in a proportion by weight of 40% or more but
less than 50%.
|
17.5%
|
-
|
-
|
85.
|
190110
|
Preparations for infant use, put up for retail sale
|
30%
|
-
|
-
|
86.
|
1903 00 00
|
All goods
|
30%
|
-
|
-
|
87.
|
1905 31 00 or 1905 32
|
All goods
|
30%
|
-
|
-
|
88.
|
2004 10 00
|
All goods
|
30%
|
-
|
-
|
89.
|
20089300,
2009 8100 , 2009 90 00, 2202 90
|
Cranberry products
|
10%
|
-
|
-
|
90.
|
2009 11 00, 2009 12 00 or 2009 19 00
|
Orange juice
|
30%
|
-
|
-
|
91.
|
21061000
|
Soya protein concentrate
|
10%
|
-
|
-
|
92.
|
210690
|
All goods (excluding compound alcoholic preparations of a kind used for
the manufacture of beverages, of an alcoholic strength by volume exceeding
0.5 per cent. By volume, determined at a temperature of 20 degrees centigrade)
|
30%
|
-
|
-
|
93.
|
Any Chapter
|
The goods specified in List 1 used in the processing of sea-food.
|
Nil
|
Nil
|
6
|
94.
|
22
|
Wine, for use as sacramental wine
|
30%
|
Nil
|
7
|
95.
|
220710
|
All goods
|
-
|
Nil
|
-
|
96.
|
2207 20 00
|
All goods
|
7.5%
|
-
|
-
|
97.
|
2208
|
Angostura bitters
|
5%
|
-
|
-
|
98.
|
23, 28, 29, 30 or 38
|
Veterinary drugs and other goods specified in List 2
|
10%
|
-
|
-
|
99.
|
230120
|
All goods
|
5%
|
-
|
-
|
100.
|
2302 40 00
|
Bran, sharps and other residues, whether or not in the form of pellets,
derived from the sifting, milling or other working of rice
|
15%
|
-
|
-
|
101.
|
2301 20, 2309 90 32, 2309 90 39
|
Fin fish feed
|
Nil
|
-
|
-
|
102.
|
2304, 2305 or 2306
|
All goods
|
15%
|
-
|
-
|
103.
|
2304
|
Dietary soya fibre
|
15%
|
-
|
-
|
104.
|
2306
|
De-oiled rice bran oil cake
|
Nil
|
-
|
-
|
105.
|
2309 10 00
|
All goods
|
20%
|
-
|
-
|
106.
|
2309 90
|
Feed additives or pre-mixes
|
20%
|
-
|
-
|
107.
|
2309 90
|
Prawn feed, shrimp larvae feed and fish feed in pellet form
Explanation.- For the removal of doubt, "prawn feed"shall mean goods-
(i) which are capable of being used as prawn feed, as such , without
any addition or alteration thereto; and
(ii) in which the proportion of vitamin pre- mixes or vitamins, by weight,
shall not exceed the standard input output norms (SION) for prawn feed as
contained in the Public Notice No. 19 (RE-88)/1997-2002, dated the 24 th
June, 1998 (as amended from time to time) of the Government of India, in
the Ministry of Commerce and Industry.
|
5%
|
-
|
-
|
108.
|
25 (except 2515, 2516, 2523, 2524)
|
All goods
|
5%
|
-
|
-
|
109.
|
2503 00
|
Crude or unrefined sulphur
|
2.5%
|
-
|
-
|
110.
|
2510
|
Rock phosphate
|
2.5%
|
-
|
-
|
111.
|
2520 10
|
Gypsum
|
2.5%
|
-
|
-
|
112.
|
2523 29
|
All goods
|
Nil
|
-
|
-
|
113.
|
2528
|
Boron ores
|
2.5%
|
-
|
-
|
114.
|
2529 22 00
|
Acid grade fluorspar
|
5%
|
-
|
-
|
115.
|
25, 28, 38 or 39
|
The following goods, when imported for use in the manufacture of refractory
products falling under Chapters 38, 68 or 69, namely:-
(A)
(1) Aluminous cement
(2) Silicon metal (99%)
(3) Micro/fumed silica
(4) Brown fused alumina
(5) Sintered/tabular alumina
(6) Fused zirconia
(7) Sodium hexameta phosphate
(8) Silicon carbide
(9) Boron carbide
(10) Reactive alumina
(11) Fused silica; and
(B) Phenolic resin
|
5%
5%
|
-
-
|
5
5
|
116.
|
26
|
Gold ores and concentrates for use in the manufacture of gold
|
Nil
|
2%
|
5 and 8
|
117.
|
2601 to 2617
|
All goods
|
2.5%
|
-
|
-
|
118.
|
26040000
|
Nickel ore and concentrate
|
Nil
|
-
|
-
|
119.
|
26121000
|
Uranium concentrate (U308), for generation of nuclear power
|
Nil
|
-
|
-
|
120.
|
262011 00, 262019 00
|
All goods
|
5%
|
-
|
-
|
121.
|
2620 30
|
All goods
|
5%
|
-
|
-
|
122.
|
2701
|
Coking coal
Explanation.- For the purposes of this exemption, "Coking coal" means
coal having mean reflectance of more than 0.60 and Swelling Index or Crucible
Swelling Number of 1 and above
|
Nil
|
-
|
-
|
123.
|
27011920
|
Steam Coal
|
Nil
|
1%
|
-
|
124.
|
2701 11 00, 2701 12 00, 2701 19
|
All goods other than those specified at S. Nos. 122 and 123 above.
|
5%
|
-
|
-
|
125.
|
2704 00
|
Metallurgical coke
|
Nil
|
-
|
-
|
126.
|
2707
|
Carbon black feed stock
|
2.5%
|
-
|
-
|
127.
|
2709 00 00
|
All goods
|
Nil
|
-
|
-
|
128.
|
2710
|
Avgas
|
Nil
|
-
|
-
|
129.
|
2710
|
Naphtha for the manufacture of polymers specified at S. Nos. 237 to 240
below, imported by M/s Haldia Petrochemicals Limited(HPL)
|
Nil
|
-
|
5
|
130.
|
2710, 2711, 2712, 2713, 2714 or 2715
|
All goods(including naphtha),other than goods mentioned at Sr. Nos. 131,
132, 133, 134, 135, 136, 137, 141, 143
|
5%
|
-
|
-
|
131.
|
2710
|
Motor spirit commonly known as petrol
|
2.5%
|
-
|
-
|
132.
|
2710
|
High speed diesel (HSD)
|
2.5%
|
-
|
-
|
133.
|
2710
|
Naphtha, when imported by Ratnagiri Gas and Power Private Limited (RGPPL),
for use in generation of electricity in the power plants of Ratnagiri Gas
and Power Private Limited (RGPPL) at Dabhol, District Ratnagiri, Maharashtra
|
Nil
|
Nil
|
-
|
134.
|
2710
|
Naphtha, when imported for generation of electrical energy by a generating
company as defined in section 2(28) of the Electricity Act, 2003 (36 of
2003) to supply electrical energy or to engage in the business of supplying
electrical energy: Provided that the exemption shall not be available if
such naphtha is used for generation of electrical energy by captive generating
plant as defined in section 2(8) of the Electricity Act, 2003 (36 of 2003).
|
Nil
|
-
|
-
|
135.
|
2710 19 20
|
All goods
|
Nil
|
-
|
-
|
136.
|
2710 or 2714 90
|
All goods, for the manufacture of fertilisers
|
Nil
|
Nil
|
5
|
137.
|
2710 19
|
Kerosene imported by the Indian Oil Corporation Limited, Hindustan Petroleum
Corporation Limited, Bharat Petroleum Corporation Limited and IBP Company
Limited for ultimate sale through the Public Distribution System
Explanation.- "Kerosene" means any hydrocarbon oil (excluding mineral
colza oil and white spirit) which has a smoke point of 18 mm or more (determined
in the apparatus known as the smoke point lamp in the manner indicated in
the Bureau of Indian Standards specifications ISI : 1448 (P-31)-1968 and
is ordinarily used as an illuminant in oil burning lamps.
|
Nil
|
-
|
-
|
138
|
27111100
|
Liquefied natural gas (LNG)
|
5%
|
-
|
-
|
139.
|
2711 11 00
|
Liquefied natural gas (LNG) and Natural
|
Nil
|
-
|
-
|
|
|
gas (NG), when imported for generation of electrical energy by a generating
company as defined in section 2(28) of the Electricity Act, 2003 (36 of
2003) to supply electrical energy or to engage in the business of supplying
electrical energy: Provided that the exemption shall not be available if
such liquefied natural gas (LNG) and natural gas (NG), is used for generation
of electrical energy by captive generating plant as defined in section 2(8)
of the Electricity Act, 2003 ( 36 of 2003)
|
|
|
|
140.
|
27111200, 27111300,
27112100
|
All goods
|
5%
|
-
|
-
|
141.
|
27111200,
27111300,
27111900
|
Liquefied propane and butane mixture, Liquefied propane, liquefied butane
and liquefied petroleum gases (LPG) imported for supply to household domestic
consumers at subsidized prices under the public distribution system (PDS)
kerosene and domestic LPG Subsidy Scheme, 2002, as notified by the Ministry
of Petroleum and Natural Gas vide notification No. P-20029/18/2001-PP. dated
the 28th January, 2003
|
Nil
|
-
|
-
|
142.
|
2711 19 00
|
Liquefied petroleum gases(LPG)
|
5%
|
-
|
-
|
143.
|
2713
|
Petroleum coke
|
2.5%
|
-
|
-
|
144.
|
27 or 34 or 8705
|
Following material and equipment for construction of roads based on the
bio-based asphalt, namely :-
(i) Bio-based asphalt sealer and preservation agent;
(ii) Millings remover and crack filler;
(iii) Asphalt remover and corrosion protectant;
(iv) Sprayer system for bio-based asphalt
|
Nil
|
-
|
9
|
145.
|
2716 00 00
|
Electrical energy removed from a Special Economic Zone into Domestic
Tariff Area or non processing areas or Special Economic Zone-
(a) If removed from power projects of 1000 MW and above,
(i) using imported coal as fuel;
(ii) using domestic coal as fuel;
(iii) using domestic gas as fuel;
(b) If removed from power projects of less than 1000 MW,-
(i) using imported coal as fuel;
(ii) using domestic coal as fuel;
(iii) using domestic gas as fuel;
|
Rs. 100 per 1000 kwh
Nil
Rs. 110 per 1000 kwh
Rs. 40 per 1000 kwh
Nil
Rs. 60 per 1000 kwh
|
-
-
-
-
-
-
|
-
-
-
-
-
-
|
146.
|
2716 00 00
|
All goods, other than goods mentioned at S. No. 145
|
Nil
|
-
|
-
|
147.
|
28, 29 or 30
|
The following goods, namely: -
(A) Drugs, medicines, diagnostic kits or equipment specified in List
3
(B) Bulk drugs used in the manufacture of drugs or medicines at (A)
|
5%
5%
|
-
-
|
-
5
|
148.
|
28, 29, 30 or 38
|
The following goods, namely:-
(A) Life saving drugs / medicines including their salts and esters and
diagnostic test kits specified in List 4
(B) Bulk drugs used in the manufacture of life saving drugs or medicines
at (A)
(C) Other life saving drugs or medicines
|
Nil
Nil
Nil
|
-
-
Nil
|
-
5
10
|
149.
|
28, 29, 32, 39, 54, 56, 70, 72 or 90
|
The following goods, namely:-
(A) Goods specified in List 5, for the manufacture of telecommunication
grade optical fibres or optical fibre cables;
(B) Fibre reinforced plastic rods (FRP), for the manufacture of telecommunication
grade optical fibres or optical fibre cables;
(C) Goods specified in List 6 for manufacture of telecommunication grade
FRP
|
Nil
Nil
Nil
|
-
-
-
|
5
5
5
|
150.
|
28
|
All goods
|
7.5%
|
-
|
-
|
151.
|
28
|
Phosphoric acid, for the manufacture of fertilizers
|
5%
|
Nil
|
-
|
152.
|
28
|
Anhydrous ammonia, for the manufacture of goods falling under Chapter
31, for use as fertilizers
|
-
|
Nil
|
-
|
153.
|
28, 29, 84, 85 or 90
|
The goods specified in List 7, for the manufacture of laser and laser
based instrumentation
|
Nil
|
-
|
11
|
154.
|
28 or 38
|
The following goods, namely:-
(a) Silicon in all forms, that is, polycrystalline silicon or ingots,
for the manufacture of undiffused silicon wafers;
(b) Undiffused silicon wafers, for the manufacture of solar cells or
solar cell modules;
|
Nil
|
-
|
5
|
155.
|
28, 29, 32, 39, 70 or 90
|
Following goods for manufacture of telecommunication grade impregnated
glass reinforcement roving, namely,-
(i) E-glass roving/yarn;
(ii) liquid absorbent polymer;
(iii) polyurethane polymer;
(iv) vinyl polymer
|
10%
|
-
|
5
|
156.
|
28012000
|
Iodine
|
2.5%
|
-
|
-
|
157.
|
Any Chapter
|
Common salt (including Rock Salt, Sea Salt and Table Salt)
|
Nil
|
-
|
-
|
158.
|
2809 20 10
|
All goods
|
5%
|
-
|
-
|
159.
|
2818 20 10
|
All goods
|
5%
|
-
|
-
|
160.
|
2825
|
Vanadium pentaoxide or vanadium sludge
|
2.5%
|
-
|
-
|
161.
|
2825 40 00
|
Nickel oxide and hydroxide
|
Nil
|
-
|
-
|
162.
|
2841
|
Ammonium Metavanadate
|
2.5%
|
-
|
-
|
163.
|
28442000
|
Sintered natural uranium dioxide, Sintered uranium dioxide pellets (U-235),
for generation of nuclear power
|
Nil
|
-
|
-
|
164.
|
2852 or 3822
|
Pharmaceutical Reference Standard
|
5%
|
-
|
12
|
165.
|
29 (except 2905 43 00, 2905 44 00 and 293371 00)
|
All goods
|
7.5%
|
-
|
-
|
166.
|
29 or 38
|
Alpha pinene
|
5%
|
-
|
-
|
167.
|
29 or any Chapter
|
Raw materials, intermediates and consumables supplied by the UNICEF for
the manufacture of DTP vaccines
|
Nil
|
Nil
|
13
|
168.
|
29, 30, 35, 38 or 39
|
The following goods, for the manufacture of enzyme linked immunoabsorbent
assay kits (ELISA Kits), namely :-
|
5%
|
-
|
5
|
|
|
(i) Plastic ELISA plates;
(ii) Deactivated positive control sera against human and animal diseases;
(iii) Enzyme horse raddish peroxidase;
(iv) Enzyme Alkaline phosphatase;
(v) Enzyme glucose oxidase;
(vi) Animal anti-human immunoglobins;
(vii) Protein A or Protein A Gold Conjugates;
(viii) Polystyrene latex beads;
(ix) Deactivated enzyme labelled human anti-HIV reagent
(x) Enzyme conjugates of antibodies or antigens or Protein A;
(xi) Natural or synthetic or recombinant antigens relating to human and
animal diseases;
(xii) Antibodies (monoclonal or polyclonal) relating to human and animal
diseases;
(xiii) Stabilizers for the Enzyme conjugate;
|
|
|
|
169.
|
29 or 38
|
Gibberellic acid
|
5%
|
-
|
-
|
170.
|
29
|
DL-2 Aminobutanol, Diethyl malonate, Triethyl orthoformate, Aceto butyrolactone,
Thymidine, Artemisinin
|
5%
|
-
|
-
|
171.
|
29
|
Maltol, for use in the manufacture of deferiprone
|
Nil
|
-
|
5
|
172.
|
29 or 38
|
Alkyl esters of long chain fatty acids obtained from vegetable oils,
commonly known as bio- diesels
|
10%
|
-
|
-
|
173.
|
2901, 2902, 2903 (except 2903 11 10, 2903 12 00, 2903 13 00, 2903 22
00), 2904
|
All goods
|
5%
|
-
|
-
|
174.
|
2902 43 00
|
p-Xylene
|
Nil
|
-
|
-
|
175.
|
2902 50 00
|
Styrene
|
2.5%
|
-
|
-
|
176.
|
29026000
|
Ethyl benzene
|
5%
|
-
|
-
|
177.
|
2903 15 00
|
Ethylene dichloride (EDC)
|
2.5%
|
-
|
-
|
178.
|
2903 21 00
|
Vinyl chloride monomer (VCM)
|
2.5%
|
179.
|
2905 31 00
|
Mono ethylene glycol (MEG)
|
5%
|
-
|
-
|
180.
|
2907 2300
|
Bis-phenol A
|
Nil
|
-
|
-
|
181.
|
2910 3000
|
Epichlorohydrin
|
2.5%
|
-
|
-
|
182.
|
2917 36 00
|
Pure terephthalic acid (PTA)
|
5%
|
-
|
-
|
183.
|
2917 37 00
|
Dimethyl terephthalate (DMT)
|
5%
|
-
|
-
|
184.
|
2926 10 00
|
Acrylonitrile
|
2.5%
|
-
|
-
|
185.
|
2929 10 90
|
Diphenylmethane 4, 4-diisocyanate (MDI) for use in the manufacture of
spandex yarn
|
5%
|
-
|
5
|
186.
|
293371 00
|
Caprolactam
|
7.5%
|
-
|
-
|
187.
|
2905 43 00, 2905 44 00, 3301, 3501, 3502,3503, 3504, 3505, 3809 10 00,
3823 11, 3823 12 00, 38231300,
3823 19 00,
382460, 4001 21 00, 4001 22 00, 4001 29
|
All goods
|
20%
|
-
|
-
|
188.
|
30
|
Medicaments containing spirit
|
-
|
Nil
|
-
|
189.
|
30
|
Japanese Encephalitis (JE) vaccine, imported by the Andhra Pradesh Government
through UNICEF
|
Nil
|
-
|
-
|
190.
|
30 or any other Chapter
|
Drugs and materials
|
Nil
|
Nil
|
14
|
191.
|
Any Chapter
|
Artificial Plasma
|
5%
|
-
|
-
|
192.
|
Any Chapter
|
The Blood group sera, namely: -
Anti C., anti E., anti c., anti e., anti M., anti N., anti Le., anti
Pl., anti S., anti human globulin sera, anti F., anti kell, anti cellane,
anti JKa., and anti I
|
Nil
|
-
|
-
|
193.
|
Any Chapter
|
Artificial kidney
|
Nil
|
-
|
-
|
194.
|
Any Chapter
|
All types of contraceptives
|
Nil
|
-
|
-
|
195.
|
30029030
|
Probiotics
|
5%
|
-
|
-
|
196.
|
31( Except 31022100, 31025000, 31043000, 31052000, 31053000, 31054000,
31055100, 31055900, 31056000, 31059010, 31059090)
|
All goods
|
7.5%
|
-
|
-
|
197.
|
31
|
Kyanite salts, in a form indicative of their use for manurial purpose
|
5%
|
-
|
-
|
198.
|
31
|
Muriate of potash, for use as manure or for the production of complex
fertilisers
|
5%
|
-
|
-
|
199.
|
31
|
Ammonium phosphate or ammonium nitro-phosphate, for use as manure or
for the production of complex fertilisers
|
5%
|
-
|
-
|
200.
|
31
|
Composite fertilisers
|
5%
|
-
|
-
|
201.
|
31
|
Potassium Nitrate, in a form indicative of its use for manurial purpose
|
5%
|
-
|
-
|
202.
|
31
|
I. The following Water Soluble Fertilizers included in Schedule 1, part
A of the Fertilizers Control Order, namely:-
|
(a) Potassium nitrate (13:0:45)
|
5%
|
-
|
-
|
(b) Calcium nitrate
|
5%
|
-
|
-
|
(c) Mono ammonium phosphate
|
5%
|
-
|
-
|
(d) Mono potassium phosphate (0:52:34)
|
(e) 13:40:13 NPK fertilizers
|
2.5%
|
-
|
-
|
(f) 18:18:18 NPK fertilizers
|
2.5%
|
-
|
-
|
(g) 13:25:26 fertilizers
|
2.5%
|
-
|
-
|
(h) 20:20:20 NPK fertilizers
|
2.5%
|
-
|
-
|
(i) 6:12:36 NPK fertilizers
|
2.5%
|
-
|
-
|
(j) Potassium magnesium sulphate
|
2.5%
|
-
|
-
|
(k) 19:19:19 NPK fertilizers
|
2.5%
|
-
|
-
|
(l) NPK 12:30:15
|
2.5%
|
-
|
-
|
(m) NPK 12:32:14
|
2.5%
|
-
|
-
|
II. The following Liquid fertilizers included in schedule 1 part A of
the Fertilizers Control Order, namely:-
|
(a) Super phosphoric acid ( 70% P2 O5)
|
5%
|
-
|
-
|
(b) Ammonium poly-phosphate ( 10-34-0) (Liquid)
|
5%
|
-
|
-
|
(c) Zincated phosphate ( Suspension)
|
5%
|
-
|
-
|
203.
|
3102 10 00
|
Urea
|
5%
|
-
|
-
|
204.
|
3104 30 00
|
Potassium sulphate, containing not more than 52% by weight of potassium
oxide
|
5%
|
-
|
-
|
205.
|
3105 30 00
|
Diammonium phosphate, for use as manure or for the production of complex
fertilisers
|
5%
|
-
|
-
|
206.
|
32, 34, 38, 83 or any other Chapter
|
(a) Electric parts for fitting on electric lamp / table lamp / wall lamp
/ ceiling lamp / door lamp / window lamp / garden lamp ;
(b) Hinges, metal locks and back of photo frames, and fittings for photo
frame / box ;
(c) Wax items for candle holder / votive / cup;
(d) Chemicals / lacquer required for improved finish of export product
;
(e) Motifs for attachment on export product;
(f) Severe atmospheric corrosion inhibitor (SACI) used as rust preventive
concentrate for coating on ornamental painted and unpainted cast iron artware
;
(g) Heat resistant paint used on cast iron items for ornamental fire
place accessories;
(h) Wood polish materials ; and
(i) Poly films used for shrink wrapping and cling - wrapping of artwares
(j) Wooden biscuit (splings-joining accessory for wooder board);
(k) Decorative paper for lamp shade;
(l) Sea shell, Mother of Pearl (MOP), Cattle horn and Bone Materials;
(m) Prints for photo frames
(n) Animal hair materials for brushes;
(o) Copper adhesive tape 1/2" or less;
(p) adhesive copper foil1/8" to 1;
(q) Patina and patina bronze;
(r) Analog clock movement;
(s) Hardware brass and metal fittings for furniture;
(t) Handles/blades for cutlery;
(u) Glass sheet (clear or opaque or cloured glass) for use with mosaic;
(v) Air and electric operated screw driver with hose and couplings;
(w) Tool bits, for motorizer and screw driver;
(x) Glue applicator;
(y) Moisture measuring tools;
(z) Air operated guns and tools for inserting fasteners for brads, flexi-points,
pins, staples, nails and hinges;
(za) Power operated mitre saw;
|
Nil
|
Nil
|
15
|
207.
|
32, 84 or 96
|
Ink cartridges, ribbon assembly, ribbon gear assembly, ribbon gear carriage,
for use in printers for computers
|
5%
|
-
|
-
|
208.
|
3201, 3202, 3203, 3204, 3205 00 00, 3206 (except 3206 11 and 3206 19
00)
or 3207
|
All goods
|
7.5%
|
-
|
-
|
209.
|
3206 5000
|
Triband Phosphor
|
Nil
|
-
|
-
|
210.
|
3207 10 40
|
Ceramic colours
|
5%
|
-
|
-
|
211.
|
3207 40 00
|
All goods
|
5%
|
-
|
-
|
212.
|
32099090
|
Organic / inorganic coating material for manufacture of electrical steel
|
5%
|
-
|
5
|
213.
|
330210
|
All goods (excluding compound alcoholic preparations of a kind used for
the manufacture of beverages, of an alcoholic strength by volume exceeding
0.5 per cent. volume, determined at 20 degrees centigrade)
|
10%
|
-
|
-
|
214.
|
3403
|
All goods
|
7.5%
|
-
|
215.
|
35
|
The following goods for use in the manufacture of Plasma Volume Expanders,
namely:-
(i) Hydroxyethyl starch,
(ii) Dextran
|
5%
|
-
|
5
|
216.
|
3504
|
Isolated soya protein
|
10%
|
-
|
-
|
217.
|
37 or 85
|
Films and video cassettes
|
_
|
Nil
|
16
|
218.
|
37
|
Film of a predominantly educational character
|
_
|
Nil
|
17
|
219.
|
37
|
Microfilms, of printed books (including covers for printed books), periodicals
(including newspapers), music manuscripts, maps, charts, plans, drawings
and designs
|
_
|
Nil
|
-
|
220.
|
37
|
Exposed and developed film sheets for printing or reproduction of printed
books (including covers for printed books), periodicals (including newspapers),
music manuscripts, maps, charts, plans, drawings and designs
|
_
|
Nil
|
-
|
221.
|
37
|
Exposed cinematographic films
|
_
|
Nil
|
18
|
222.
|
37
|
Colour positive unexposed cinematographic film in jumbo rolls and colour
negative unexposed cinematographic film in rolls of 400 feet and 1000 feet
|
5%
|
-
|
-
|
223.
|
3701 20 00 or 3702
|
Instant print film
|
5%
|
-
|
-
|
224.
|
3704
|
Cinematographic films, exposed but not developed
|
Nil
|
Nil
|
-
|
225.
|
Any Chapter
|
Promotional material (like Trailers, making of film etc.) imported in
the form of electronic promotion kits (EPK)/ beta cams
|
Nil
|
Nil
|
19
|
226.
|
38
|
Dipping oil, Paclobutrazol (Cultar)
|
10%
|
-
|
-
|
227.
|
38
|
Bio-pesticides, based on -
(i) Bacillus thuringiensis var. kurstaki
(ii) Bacillus thuringiensis var. israelensis
(iii) Bacillus sphaericus
(iv) Saccharopolyspora spinosa
|
5%
|
-
|
-
|
228.
|
3801, 3802, 3803 00 00, 3804, 3805, 3806, 3807, 3809 (except 3809 10
00), 3810, 3812, 3815,38160000, 3817, 3821 00 00 or 3824 (except 3824 60)
|
All goods
|
7.5%
|
-
|
-
|
229.
|
3823 11 11
|
Crude Palm Stearin for use in the manufacture of laundry soap
|
Nil
|
-
|
5
|
230.
|
3823 11 90, 3823 12 00, 3823 13 00, 3823 19 00,or 3823 70
|
All goods
|
15%
|
-
|
-
|
231.
|
39
|
Ethylene vinyl acetate (EVA)
|
5%
|
-
|
-
|
232.
|
39, 48 or any other Chapter
|
Tags, labels, stickers, belts, buttons or hangers, imported by bonafide
exporters
|
Nil
|
Nil
|
-
|
233.
|
39 or any Chapter
|
Security fibre, security threads, M- feature for use in the manufacture
of security paper by Security Paper Mill, Hoshangabad.
|
Nil
|
Nil
|
5
|
234.
|
39, 72 and 81
|
The following goods, for the manufacture of orthopaedic implants falling
under sub-heading 9021 10, namely:-
(i) Special grade stainless steel;
(ii) Titanium alloys;
(iii) Cobalt-chrome alloys;
(iv) High-density polyethylene.
|
Nil
|
-
|
5
|
235.
|
39 or 74
|
(i) Alatheon
(ii) Copper wire
|
Nil
|
Nil
|
5 and 20
|
236.
|
3901 to 3915 (except 3908)
|
All goods
|
7.5%
|
-
|
-
|
237.
|
3901
|
The following polymers of ethylene, namely:-
(i) Low density polyethylene (LDPE),
(ii) Linear low density polyethylene (LLDPE),
(iii) High density polyethylene (HDPE),
(iv) Linear medium density polyethylene (LMDPE),
(v) Linear high density polyethylene (LHDPE)
|
5%
|
-
|
-
|
238.
|
3902
|
All goods other than poly iso butylene
|
5%
|
-
|
-
|
239.
|
3903
|
All goods
|
5%
|
-
|
-
|
240.
|
3904
|
Polymers of vinyl chloride
|
5%
|
-
|
-
|
241.
|
390690
|
Sodium polyacrylate
|
5%
|
-
|
-
|
242.
|
39069090
|
Super absorbent polymer (SAP) imported for use in the manufacture of
adult diapers.
|
5%
|
6%
|
5
|
243.
|
3907
|
Polyester chips
|
5%
|
-
|
-
|
244.
|
3907 20 10
|
Polytetrametylene ether glycol, (PT MEG) for use in the manufacture of
spandex yarn
|
5%
|
-
|
5
|
245.
|
39074000
|
Polycarbonates
|
5%
|
-
|
-
|
246.
|
3908
|
Nylon chips
|
7.5%
|
-
|
-
|
247.
|
39139090
|
Compostable polymer or bio-plastic used in the manufacture of bio-degradable
agro mulching films, nursery plantation pots and flower pots.
|
Nil
|
-
|
5
|
248.
|
3920
|
Subbed polyester base, imported by M/s Hindustan Photo Films manufacturing
Company Limited, Udhagamandalam for the manufacture of medical or industrial
X-ray films and graphic art films.
|
Nil
|
-
|
-
|
249.
|
40
|
New or retreaded Pneumatic tyres of rubber of a kind used in aircrafts
of heading 8802
|
Nil
|
Nil
|
21
|
250.
|
40
|
New or retreaded Pneumatic tyres of rubber of a kind used in aircrafts
of heading 8802
|
Nil
|
Nil
|
22
|
251.
|
400110
|
All goods
|
Rs. 49/Kg
|
-
|
23
|
252.
|
4001 21, 4001 22, 4001 29
|
Goods up to an aggregate quantity of forty thousand metric tonnes of
total imports of such goods in the remaining part of the financial year
2011-12.
Explanation. - For removal of doubts, it is clarified that the quantity
of goods already cleared under S. No. 491A of notification No. 21/2002-Customs
dated the 1st March, 20102, up to the date of its supersession, shall be
included in computing the aggregate quantity.
|
7.5%
|
-
|
1
|
253.
|
4002 31 00
|
All goods
|
5%
|
-
|
-
|
254.
|
4002 39 00
|
Chlorobutyl rubber or bromobutyl rubber
|
5%
|
-
|
-
|
255.
|
41
|
Wet blue chrome tanned leather, crust leather, finished leather of all
kinds, including splits and sides of the aforesaid
|
Nil
|
-
|
-
|
256.
|
4114 20 10
|
Patent leather
|
Nil
|
-
|
-
|
257.
|
4301 or 4302
|
Raw, tanned or dressed fur skins
|
-
|
Nil
|
-
|
258.
|
4301 or 4302
|
All goods (other than those falling under tariff item 4301 30 00)
|
Nil
|
-
|
-
|
259.
|
43, 52, 54, 55, 56, 58, 59 or 60
|
Lining and inter-lining materials
|
Nil
|
Nil
|
24
|
260.
|
47
|
Pulp of wood or of other fibrous cellulosic material ( excluding rayon
grade wood pulp)
|
Nil
|
-
|
5 and 25
|
261.
|
4702
|
Rayon grade wood pulp
|
2.5%
|
-
|
-
|
262.
|
4707
|
All goods
|
Nil
|
-
|
-
|
263.
|
48
|
Grape guard, namely, paper of a type generally used for the packing of
grapes and which consists of two sheets of treated white paper pressed together
with thin rectangular pouches containing sodium meta-bi-sulphite, with kraft
paper pasted thereto or a single paper coated with sodium meta-bi-sulphite,
and which is used for the purpose of preventing fungal decay and thus helps
prolonged storage in fresh condition, imported for use in the packing of
grapes
|
5%
|
Nil
|
-
|
264.
|
48
|
Newsprint -
(i) in strips or rolls of a width not less than 34.92 cm; or
(ii) in rectangular (including square) sheets with one side not less
than 34.92 cm and the other side exceeding 15 cm in the unfolded state
|
Nil
|
Nil
|
-
|
265.
|
48
|
Uncoated paper of a kind used for the printing of newspapers, of which
not less than 50% by weight of the total fibre content consists of wood
fibres obtained by a mechanical or Chemi-mechanical process, unsized or
very lightly sized, having a surface roughness Parker Print Surf (1 Mpa)
on each side not exceeding 2.5 micro metres (microns) weighing not less
than 40 m2 and not more than 65 gms/m2
|
Nil
|
Nil
|
26
|
266.
|
4802
|
Mould vat made watermarked bank note paper, imported by the Bank Note
Press, Dewas, the Currency Note Press, Nasik, the India Security Press,
Nasik, the Security Printing Press, Hyderabad, the Bhartiya Reserve Bank
Note Mudran Limited, Mysore, or the Bhartiya Reserve Bank Note Mudran Limited,
Salbony
|
Nil
|
-
|
-
|
267.
|
4810
|
Light weight coated paper weighing upto 70 g/m 2 , imported by actual
users for printing of magazines
|
Nil
|
-
|
-
|
268.
|
49 or 8523
|
The following goods, namely:-
(i) Information Technology software, and
(ii) Document of title conveying the right to use Information Technology
software.
Explanation.- "Information Technology software" means any representation
of instructions, data, sound or image, including source code and object
code, recorded in a machine readable form, and capable of being manipulated
or providing interactivity to a user, by means of an automatic data processing
machine.
|
Nil
|
-
|
-
|
269.
|
49
|
Commonwealth and international reply coupons and UNESCO coupons
|
Nil
|
Nil
|
-
|
270.
|
49
|
Greeting cards, diaries and calendars, and corresponding number of envelopes
for such greeting cards, diaries and calendars, imported by UNICEF
|
Nil
|
-
|
-
|
271.
|
Any Chapter
|
Commercial catalogues in book form
|
Nil
|
-
|
-
|
272.
|
4901 10 10, 4901 91 00 or 4901 99 00
|
Printed books (including covers for printed books) and printed manuals,
in bound form or in loose-leaf form with binder, executed on paper or any
other material including transparencies
|
Nil
|
-
|
-
|
273.
|
4906
|
All goods
|
Nil
|
-
|
-
|
274.
|
4907
|
Printed Indian Bank Notes, imported by the Reserve Bank of India
|
Nil
|
-
|
-
|
275.
|
4911
|
Plans, drawings and designs
|
Nil
|
-
|
-
|
276.
|
5002
|
Raw silk (not thrown)
|
5%
|
-
|
-
|
277.
|
5101
|
All goods
|
5%
|
-
|
-
|
278.
|
5102
|
All goods
|
5%
|
-
|
-
|
279.
|
5103
|
Wool Waste
|
5%
|
-
|
-
|
280.
|
5103
|
All goods other than Wool waste
|
10%
|
-
|
-
|
281.
|
5105
|
Wool Tops
|
5%
|
-
|
-
|
282.
|
52 or any Chapter
|
(a) Fasteners including buttons and snap fasteners, zip fastereners including
zippers in roll, sliders/pullers and end stoppers;
(b)Inlay cards
(c) Shoulder pads;
(d) Buckles;
(e) Eyelets
(f) Hooks and eyes
(g) Rivets
(h) Collar stays, collar patties, butterfly and other garment stays including
plastic stays
(i) Fusible embroidery motifs or prints
(j) Laces
(k) Badges including embroidered badges
(l) Embroidery threads
(m) Sewing thread
(n) Stones (other than precious and semi precious)
(o) Sequin
(p) Tape, Elastic tape and hook tape of width not exceeding 75 mm
(q) Velcro tape
(r) Cord and cord stopper
(s) Toggles
(t) Polywadding materials
(u)Stud;
(v) Elastic cloth and elastic band;
(w)Quilted wadding materials;
(x)Beads for embroidery
(y)sample fabric of total length upto 500 metre imported during one financial
year;
(z) printed bags
(za) Knitted ribs;
(zb) anti-theft devices like labels, tags and sensors.
|
Nil
|
Nil
|
24
|
283.
|
Any Chapter
|
(a) Buckles, 'D' rings, eyes, rivets and studs;
(b) Buttons and fasteners of all types;
(c) Velcro Hook, Velcro tapes and Loop tape;
(d) Elastic Tape, adhesive tape and reinforcement tape;
(e) Stamping foil;
(f) Sewing Thread;
(g) Locks including magnetic locks;
(h) Metal handles, handles fittings, dog hooks, Logos all types, Ring
binders, key hooks, key rings, key holders, push clip, Chains, pullers,
hinges and magnetic snaps;
(i) Slow liners;
(j) Loop rivets and loop oval;
(k) Polishes, creams and shoe finishes in any form;
(l) Lining, interlining and reinforcement materials;
(m) Insoles or mid-soles and sheets therefore;
(n) Shanks and welts;
(o) Toe Caps and toe puffs and counters or Thermoplastic sheets;
(p) Synthetic or poly;
(q) packaging boxes of all types;
(r) Ribs
(s) adhesives;
(t) unit soles and sheets;
(u) heels;
(v) leather board;
(w) saddle tree;
(x) nylon mesh
(y) Fittings, snaps of metals or alloys;
(z) Metal fittings / embellishments, webbing of any material for making
harness and saddlery items;
(za) Stirrup of any material and stirrup bars used for making Saddle
Tree;
(zb) Nylon polyester/PVE mesh and fabrics for making non-leather harness
and saddlery items;
(zc) Beading material - synthetic / leather / fabric;
(zd) Chatons / stones / beads / crystals as decorative items;
(ze) Shoe laces;
(zf) Stretch fabric for shoe uppers;
(zg) Cork sheets for soles covering soles and insoles;
(zh) Artificial fur and alarm tag;
(zi) Buckle;
(zj) Plastic clear sheets;
(zk) Magnets for use in leather goods;
(zl) Inlay cards;
(zm) Synthetic material/synthetic leather;
(zn) Reflactive tapes/Fashion tapes;
(zo) Micropak labels and Polyethylene Sheets;
(zp) Protective steel toe cap and steel Mid sole
|
Nil
|
Nil
|
27
|
284
|
Any Chapter
|
(a) Zipper, fastener and slider ;
(b) Lace ;
(c) Velcro tape ;
(d) Elastic tape, curtain tape and edgeband tape;
(e) Curtain hook ;
(f) Button and eyelet ;
(g) Tassel ;
(h) Bead and sequin ;
(i) Insert ;
(j) Sample fabric of total length upto 500 Meters imported during one
financial year
|
|
|
|
298.
|
6001 10 or 6001 92
|
Pile fabrics for the manufacture of toys
|
10%
|
-
|
5
|
299.
|
6310
|
All goods
|
5%
|
-
|
-
|
300.
|
64 or any other Chapter
|
The following goods for use in the leather industry, namely:-
(1) Parts, consumables and other items specified in List 8
(2) Other parts, consumables and items specified in List 9
|
20%
20%
|
-
-
|
-
31
|
301.
|
Any Chapter
|
Parts of umbrella, including umbrella panels
|
5%
|
-
|
-
|
302.
|
68, 82 or 84
|
Moulds (including chassis for the manufacture of semi-conductor devices),
tools (excluding tungsten carbide micro PCB drills) and dies, for the manufacture
of parts of electronic components or electronic equipments
|
Nil
|
-
|
32
|
303.
|
68, 72 or 85
|
The following goods, namely:-
(1) Graphite Felt or graphite pack for growing silicon ingots;
(2) Thin steel wire used in wire saw for slicing of silicon wafers
|
5%
|
-
|
5
|
304.
|
6902 or 6903
|
All goods
|
5%
|
-
|
-
|
305.
|
70
|
Toughened glass with low iron content and transmissivity of minimum 91%
and above, for use in solar thermal collectors or heaters
|
5%
|
-
|
5
|
306.
|
70 or 90
|
Preform of Silica for the manufacture of telecommunication grade optical
fibres or optical fibre cables.
|
Nil
|
-
|
5
|
307.
|
7001 00 10
|
All goods
|
5%
|
-
|
-
|
308.
|
7015
|
Rough opthalmic blanks, for manufacture of optical lenses
|
5%
|
-
|
-
|
309.
|
71
|
The following goods, namely:-
(i) Raw pearls;
(ii) Rubies, emeralds and sapphires, unset and imported uncut
|
5%
Nil
|
Nil
Nil
|
-
-
|
310.
|
71
|
Rough diamonds (industrial or non-industrial)
|
Nil
|
Nil
|
-
|
311.
|
71
|
Rough coloured gemstones
|
Nil
|
-
|
-
|
312.
|
71
|
Rough semi-precious stones
|
Nil
|
-
|
-
|
313.
|
71
|
Cut and polished coloured gemstones
|
2%
|
-
|
_
|
314.
|
71
|
Diamonds including lab grown diamonds-semi-processed, half-cut or broken
|
Nil
|
-
|
-
|
315.
|
71
|
Non-industrial diamonds including lab-grown diamonds(other than rough
diamonds)
|
2%
|
-
|
-
|
316.
|
71
|
Current coins of the Government of India
|
Nil
|
Nil
|
-
|
317.
|
71
|
Foreign currency coins when imported into India by a Scheduled Bank
|
Nil
|
Nil
|
33
|
318.
|
71
|
Gold dore bar, having gold content not exceeding 95%
|
Nil
|
2%
|
5 and 34
|
320.
|
71
|
Silver dore bar having silver content not exceeding 95%
|
Nil
|
3%
|
5 and 35
|
321.
|
71 or 98
|
Gold bars, other than tola bars, bearing manufacturer‟s or refiner‟s
engraved serial number and weight expressed in metric units, and gold coins
having gold content not below 99.5%, imported by the eligible passenger
|
4%
|
Nil
|
35
|
322.
|
71 or 98
|
Silver, in any form including ornaments, but excluding ornaments studded
with stones or pearls, imported by the eligible passenger
|
6%
|
Nil
|
35
|
323.
|
71
|
Gold bars, other than tola bars, bearing manufacturer‟s or refiner‟s
engraved serial number and weight expressed in metric units, and gold coins
having gold content not below 99.5%,other than imports of such goods through
post, courier or baggage.
|
4%
|
Nil
|
-
|
324.
|
71
|
Silver, in any form including silver coins having silver content not
below 99.9%, other than imports of such goods through post, courier or baggage.
Explanation.- For the purpose of this notification, silver in any
form shall include medallions and coins having silver content not below
99.9% but shall not include foreign currency coins and jewellery made of
silver.
|
6%
|
Nil
|
-
|
325.
|
7104
|
Rough synthetic gemstones
|
Nil
|
-
|
-
|
326.
|
7104
|
Rough cubic zirconia
|
Nil
|
-
|
-
|
327.
|
7104
|
Polished Cubic zirconia
|
5%
|
-
|
-
|
328.
|
7110 11 or 7110 19 00
|
Platinum
|
4%
|
-
|
-
|
329.
|
7110 3100, 7110 39 00
|
Rhodium
|
2.5%
|
-
|
-
|
330.
|
72 (except 72026000)
|
All goods other than the following:-
(i) goods mentioned against S. Nos. 329, 330, 331 and
(ii) seconds and defectives of goods falling under Chapter 72
|
5%
|
-
|
-
|
331.
|
7202 60 00
|
Ferro-nickel
|
2.5%
|
-
|
-
|
332.
|
7204
|
Melting scrap of iron or steel (other than stainless steel)
|
Nil
|
-
|
-
|
333.
|
7204 21
|
Scrap of stainless steel, for the purpose of melting
|
Nil
|
-
|
-
|
334.
|
7208, 7209, 7210, 7211, or 7212
|
All goods
|
7.5%
|
-
|
-
|
335.
|
73
|
Pipes and tubes for use in manufacture of boilers
|
7.5%
|
-
|
5
|
336.
|
7411 or 7412
|
All goods
|
7.5%
|
-
|
-
|
337.
|
75
|
All goods
|
2.5%
|
-
|
-
|
338.
|
7602
|
Aluminium scrap
|
Nil
|
-
|
-
|
339.
|
7608 or 7609 00 00
|
All goods
|
7.5%
|
-
|
-
|
340.
|
7806
|
Lead bars, rods, profiles and wire
|
5%
|
-
|
-
|
341.
|
79
|
Zinc metal recovered by toll smelting or toll processing from zinc concentrates
exported from India for such processes
|
10%
|
-
|
36
|
342.
|
7907
|
Zinc tubes, pipes and tube or pipe fittings
|
7.5%
|
-
|
-
|
343.
|
8007
|
Tin plates, sheets and strip, of a thickness exceeding 0.2 mm; tin foil
(whether or not printed or backed with paper, paperboard, plastics or similar
backing materials), of a thickness (excluding any backing) not exceeding
0.2 mm; tin powders and flakes
|
5%
|
-
|
-
|
344.
|
8101 99 90
|
Tungsten (wolfram) bars and rods, other than those obtained simply by
sintering, profiles, plates, sheets, strip and foil
|
5%
|
-
|
-
|
345
|
82
|
Dies for drawing metal, when imported after repairs from abroad, in exchange
of similar worn- out dies exported out of India for repairs
|
10%
|
-
|
37
|
346.
|
84
|
The following goods, namely:-
(i) Cricket bat and hockey stick splice joining machine
(ii) Rugby ball or soccer ball stitching machine
(iii) Moulds for soccer ball, basket ball and volley ball
|
5%
|
-
|
-
|
347.
|
84
|
Bacteria removing clarifier
|
Nil
|
-
|
-
|
348.
|
84 or any other Chapter
|
The following goods, namely:-
(i)Marine seawater pumps with fibre impellers,
(ii)Automatic fish/prawn feeder
|
5%
|
-
|
-
|
349.
|
84 or any other Chapter
|
Machinery or equipment for effluent treatment plant for leather industry
|
Nil
|
-
|
38
|
350.
|
84 or any other Chapter
|
Goods specified in List 10 required for use in high voltage power transmission
project
|
5%
|
-
|
39
|
351.
|
Any Chapter
|
Parts and components of the goods specified in List 10 required for use
in high voltage power transmission project
|
5%
|
6%
|
5 and 39
|
352.
|
84 or any other Chapter
|
The following goods (other than old and used) for use in man-made or
synthetic fibre or yarn industry, namely:-
(1) Machinery or equipment specified in List 11;
(2) Parts for manufacture of the goods at (1)
|
5%
5%
|
-
-
|
-
5
|
353.
|
84 or any other Chapter
|
The following goods(other than old and used) for use in textiles industry;
namely:-
(1) Machinery or equipment specified in List 12;
(2) Parts for manufacture of the goods at (1)
|
5%
5%
|
-
-
|
-
5
|
354.
|
Any Chapter
|
All items of equipment including machinery and rolling stock, procured
by or on behalf of Delhi Metro Rail Corporation Ltd. for use in-
(i) Delhi MRTS Project Phase-I; and
(ii) Specified corridors of Delhi MRTS Project Phase-II, comprising of
the following, namely:-
(a) Vishwavidyalaya- Jahangirpuri;
(b) Central Secretariat-Qutab Minar (via All India Institute of Medical
Sciences);
(c) Shahdara- Dilshad Garden;
(d) Indraprastha-New Ashok Nagar;
(e) Yamuna Bank-Anand Vihar-Inter State Bus Terminus; and
(f) Kirti Nagar-Mundka(along with operational Link to Sahadara- Rithala
corridor)
|
Nil
|
Nil
|
40
|
355.
|
84 or 85
|
The following goods, for use in the manufacture of static converters
for automatic data processing machines and units thereof of heading/sub-heading/
tariff item 8443 31 00, 8443 32 00, 8471, 8517 62, 8528 41 00, 8528 49 00,
8528 51 00 or 8528 61 00, namely:-
(a) Populated printed circuit boards falling under sub-heading/ tariff
item 8443 99 or 8473 30 or 8517 70 10 or 8529 90 90;
(b) Transformers falling under tariff item 8504 31 00;
(c) All goods falling under sub-heading 8504 90;
(d) SMF Battery falling under tariff item 8507 20 00;
(e) Enamelled copper wire falling under heading 8544
|
Nil
|
-
|
5
|
356.
|
84, or any other Chapter
|
Goods specified in List 13 required in connection with petroleum operations
undertaken under petroleum exploration licenses or mining leases, as the
case may be, issued or renewed after the 1st of April, 1999 and granted
by the Government of India or any State Government to the Oil and Natural
Gas Corporation or Oil India Limited on nomination basis
|
Nil
|
Nil
|
41
|
357.
|
84 or any other Chapter
|
Parts and raw materials for manufacture of goods to be supplied in connection
with the purposes of off-shore oil exploration or exploitation
|
Nil
|
Nil
|
42
|
358.
|
84 or any other Chapter
|
Goods specified in List 13 required in connection with petroleum operations
undertaken under specified contracts
|
Nil
|
Nil
|
43
|
359.
|
84 or any other Chapter
|
Goods specified in List 13 required in connection with petroleum operations
undertaken under specified contracts under the New Exploration Licensing
Policy
|
Nil
|
Nil
|
44
|
360.
|
84 or any other Chapter
|
Goods specified in List 14 required in connection with coal bed methane
operations undertaken under specified contracts under the Coal Bed Methane
Policy
|
Nil
|
Nil
|
44
|
361.
|
84 or any other Chapter
|
The following goods, namely:-
(a) Vacuum tube solar collectors, concentrating solar collectors, plastic
collectors or stirling engines, for manufacture of solar energy equipment;
(b) Linear actuators for tracking systems, Fresnel lenses or sun sensors,
for manufacture of concentrating solar collectors
|
_
|
Nil
|
-
|
362.
|
84 or any Chapter
|
The following goods, namely:-
(1) Wind operated electricity generators upto 30 KW and wind operated
battery chargers upto 30 KW
(2) Parts of wind operated electricity generators, for the manufacture
or the maintenance of wind operated electricity generators, namely:-
(a) Special bearings, (b) Gear box, (c) Yaw components, (d) Wind turbine
controllers, and (e) Parts of the goods specified at (a) to (d)
(3) Blades for rotor of wind operated electricity generators, for the
manufacture or the maintenance of wind operated electricity generators
(4) Parts for the manufacture or the maintenance of blades for rotor
of wind operated electricity generators
(5) Raw materials for the manufacture of –
(a) blades for rotor of wind operated electricity generators, or
(b) parts, sub-parts of such blades
|
5%
5%
5%
5%
5%
|
-
-
-
-
-
|
45
45
45
45
45
|
363.
|
84 or any other Chapter
|
Permanent magnets for manufacture of PM synchronous generators above
500KW for use in wind operated electricity generators
|
5%
|
-
|
46
|
364.
|
84 or any Chapter
|
Goods required for,-
(a) the substitution of ozone depleting substances (ODS);
(b) the setting up of new capacity with non – ODS technology.
Explanation.- "Goods" , for the purpose of this entry means goods
which are designed exclusively for non-ODS technology
|
Nil
|
-
|
47
|
365.
|
84 or any Chapter
|
(A) Machinery, instruments, apparatus and appliances, as well as parts
(whether finished or not) or raw materials for the manufacture of aforesaid
items and their parts, required for renovation or modernization of a fertilizer
plant; and
(B) spare parts, other raw materials (including semi-finished material)
or consumables stores, essential for maintenance of the fertilizer plant
mentioned above
|
5%
|
_
|
48
|
366.
|
84 or any other Chapter
|
Goods specified in List 15 required for setting up crude petroleum refinery
|
5%
|
-
|
-
|
367.
|
84 or any other Chapter
|
The following goods, namely:-
(1) Kits required for the conversion of motor- spirit or diesel driven
vehicles into Compressed Natural Gas driven or Propane driven or Liquefied
Petroleum Gas driven vehicles;
(2) Parts of the kits specified at (1)
|
5%
|
-
|
49
|
368.
|
84 or any other Chapter
|
Goods specified in List 16 required for construction of roads
|
Nil
|
Nil
|
9
|
369.
|
84 or any Chapter
|
All goods, for renovation or modernisation of a power generation plant
(other than captive power generation plant)
|
5%
|
_
|
50
|
370.
|
84 or any Chapter
|
All goods, imported by a manufacturer-supplier for the manufacture and
supply of machinery and equipment to a power generation plant (other than
captive power generation plant)
|
5%
|
_
|
51
|
371.
|
84 or any Chapter
|
(a) Parts of catalytic convertors, for manufacture of catalytic convertors
(b) The following goods for manufacture of catalytic convertors and their
parts, namely:-
(i) Palladium
(ii) Platinum
(iii) Rhodium
(iv) Raw Substrate (ceramic)
(v) Washcoated Substrate (ceramic)
(vi) Raw Substrate (metal)
(vii) Washcoated Substrate (metal)
(viii) Noble Metal Solution
(ix) Noble Metal Compounds
|
5%
5%
|
-
-
|
5
5
|
372.
|
84, 85 or 90
|
(i) Goods specified in List 17 required for basic telephone service,
cellular mobile telephone service, internet service or closed users‟s group
64 KBPS domestic data network via INSAT satellite system service
(ii) Parts, for manufacture of the goods at (i)
|
Nil
Nil
|
-
-
|
52
5
|
373.
|
84, 85 or any Chapter
|
(i) Goods specified in List 18 required for radio paging service
(ii) Parts, for manufacture of the goods at (i)
|
Nil
Nil
|
-
-
|
53
5
|
374.
|
84, 85 or any Chapter
|
(i) Goods specified in List 19 required for Public Mobile Radio Trunked
Service (PMRTS)
(ii) Parts, for manufacture of the goods at (i)
|
Nil
Nil
|
-
-
|
54
5
|
375.
|
84, 85 or any Chapter
|
The goods specified in List 20, for the manufacture of goods falling
under heading/sub-heading/tariff item 8523 52 00, 8541, 8542, 8543 90 00
or 8548 90 00
(2) Parts, for manufacture of the goods at (1)
|
Nil
|
-
|
5
|
376.
|
84, 85 or 90
|
The goods specified in List 21
|
Nil
|
-
|
_
|
377.
|
84, 85 or 90
|
The following goods, imported by an accredited press cameraman:-
(i) Photographic cameras;
(ii) cinematographic cameras;
(iii) digital cameras; and
(iv) lenses, filters, flash light apparatus and exposure meters required
for use with the aforesaid cameras
|
Nil
|
Nil
|
55
|
378.
|
84, 85 or 90
|
The following goods, imported by an accredited journalist:-
(i) Personal computers including lap top personal computers;
(ii) typewriters; and
(iii) fax machines
|
Nil
|
Nil
|
56
|
379.
|
84, 85 or 90
|
(1) The following goods for use in pharmaceutical and biotechnology sector,
imported for research and development purposes, by an importer registered
with the Department of Scientific and Industrial Research, in the Ministry
of Science and Technology of the Government of India, namely:-
(a) Goods specified in List 22
(b) Goods specified in List 23
(2) The following goods for use in the pharmaceutical and biotechnology
sector, imported by a manufacturer, having a research and development wing
registered with the Department of Scientific and Industrial Research, in
the Ministry of Science and Technology of the Government of India, namely:-
(a) Goods specified in List 22
(b) Goods specified in List 23
|
5%
Nil
5%
Nil
|
-
-
-
-
|
57(i)
57(i)
57(ii)
57(ii)
|
380.
|
84,85 or 90
|
Goods specified in list 24 for use of the Agro-Chemical Sector Unit having
export turnover of Rupees Twenty Crores and above during the preceding financial
year by a manufacturer having a Research and Development wing registered
with the Department of Scientific and Industrial Research, in the Ministry
of Science and Technology of the Government of India
|
Nil
|
-
|
58
|
381.
|
84 or any other Chapter
|
The following goods (other than old and used) for use in the textile
industry, namely:-
(1) Machinery or equipment specified in List 25 and List 26;
(2) Parts, for manufacture of the goods at (1)
|
5%
5%
|
-
-
|
-
5
|
382.
|
84 or any other Chapter
|
Machinery or equipment for effluent treatment plant for handloom sector
or handicraft sector.
|
Nil
|
-
|
38
|
383.
|
84 or any other Chapter
|
The following goods (other than old and used) for use in the silk textile
industry, namely:-
(1) Machinery or equipment specified in List 27, required for reeling,
weaving, twisting, processing and printing;
(ii) Automatic reeling/ dupion reeling machines and their accessories
including cocoon assorting machines, cocoon peeling machines, vacuum permeation
machine, cocoon cooking machine, reeled silk humidifier, bale press and
raw silk testing equipments
|
5%
Nil
|
-
-
|
5
-
|
384.
|
84 or any other Chapter
|
Machinery or equipment, specified in List 28,for use in the coffee plantation
sector
|
5%
|
-
|
-
|
385.
|
84 or any Chapter(other than 8516)
|
(1) Coffee vending and brewing machines other than of a kind used for
domestic purpose ; and
(2) Parts, for manufacture of the goods at (1)
|
5%
2.5%
|
-
-
|
-
-
|
386.
|
84 or any other Chapter
|
The following goods, namely:-
(A) High speed cold-set web offset rotary double width four plate wide
printing machines with a minimum speed of 70,000 copies per hour or High
speed Heat-set web offset rotary printing machines with a minimum speed
of 70,000 copies per hour, namely;
(B) Mailroom equipment suitable for use with (A), namely:-
(i) overhead conveyor gripper;
(ii) stacker;
(iii) wrapper;
(iv) labeller;
(v) strapper;
(vi) inserters;
(vii) delivery conveyors
|
5%
5%
|
Nil
6%
|
-
26
|
387.
|
84 or 85
|
Spares, supplied with outboard motors for maintenance of such outboard
motors
|
5%
|
-
|
59
|
388.
|
84 or 85
|
Braille printer or Braille embosser or Braille display, specially designed
for computer systems
|
Nil
|
-
|
-
|
389.
|
84 or 85
|
Truck refrigeration unit
|
Nil
|
-
|
-
|
390.
|
84, 85 or 90
|
Goods specified in List 29, designed for use in the leather industry
or the footwear industry
|
5%
|
-
|
-
|
391.
|
84
|
Fogging machines imported by a Municipal Committee, District Board or
other authority legally entitled to, or entrusted by the Government with,
the control or management of a Municipal Fund, for use in combating malaria
and other mosquito borne diseases
|
5%
|
Nil
|
-
|
392.
|
84
|
Spinnerettes made inter-alia of Gold, Platinum and Rhodium or any one
or more of these metals, when imported in exchange of worn-out or damaged
spinnerettes exported out of India
|
10%
|
-
|
60
|
393.
|
84
|
Bushings made of Platinum and Rhodium alloy when imported in exchange
of worn out or damaged bushings exported out of India
|
10%
|
-
|
61
|
394.
|
84
|
The following goods to be imported by or on behalf of security printing
and minting corporation of India limited (SPMCIL), namely :-
(i) Fully automatic sachet packaging machinery or equipment or plant,
its spares;
(ii) Plant or machinery or equipment, related spares and consumables
fro the manufacture of CWBN paper and other security paper;
(iii) Plant or machinery or equipment, related spares and consumables
for printing of banknotes;
(iv)Photogravure printing machine with embossing or de-bossing facility;
(v) Plant or machinery or equipment, its spares and consumables for manufacture
of e-passport;
(vi) Plant or machinery or equipment, its spares and consumables for
inspection and processing of banknotes.
|
5%
|
Nil
|
-
|
395.
|
84
|
Geothermal ground source heat pumps
|
Nil
|
-
|
-
|
396.
|
84 or any other Chapter
|
Following goods for making of gem and jewelery – (1) Automatic Chain
Making machine, (2) chain twisting machine, (3) Spiral making machine, (4)
Rolling machine (combined Profile Groovers/Strip Making) (5) and Automatic
Investing Machine/casting Machine.
|
5%
|
-
|
-
|
397.
|
84 or any other Chapter
|
The following goods, namely:-
(A) Tunnel boring machines
(B) Parts and components of (A) for use in the assembly of Tunnel boring
machines
|
Nil
Nil
|
Nil
Nil
|
-
-
|
398.
|
84 or any other Chapter
|
The following goods required for manufacture of Optical disk drives(
ODD), namely:-
(i) Pick up assembly
(ii) Digital signature procession integrated circuit
(iii) DC motor
(iv) LDO voltage regulator
|
Nil
|
-
|
5
|
399.
|
84 or any other Chapter
|
(A) The following goods,namely:-
(i) Paddy transplanter;
(ii) Laser land leveller;
(iii) Reaper-cum-binder;
(iv) Sugarcane harvester;
(v) Straw or fodder balers;
(vi) Cotton picker;
(vii) Track used for manufacture of track type combine harvesters;
(viii) Sugarcane planter;
(ix) Root or tuber crop harvesting machines;
(x) Rotary tiller/weeder
(B) Parts and components required for manufacture of goods specified
at (A)
|
2.5%
2.5%
|
-
-
|
-
5
|
400.
|
8421
|
Catalytic convertors
|
5%
|
-
|
-
|
401.
|
8422 30 00, 8422 40 00 or 8422 90 90
|
All goods
|
5%
|
-
|
-
|
402.
|
8424
|
The following goods, namely:-
(A) Sprinklers and drip irrigation systems for agricultural and horticultural
purposes;
(B) Micro Irrigation equipment
|
5%
5%
|
-
-
|
-
-
|
403.
|
84362100
|
All goods
|
5%
|
-
|
-
|
404.
|
8438
|
All goods
|
5%
|
-
|
-
|
405.
|
8443
|
Part of manufacturers of printers falling under sub heading 8443 32
|
Nil
|
6%
|
5
|
406.
|
8446,8448
|
The following goods(other than old and used) for use in the textile industry,
namely:-
(i) Shuttle less looms;
(ii) parts and components for manufacture of the goods at (i)
|
Nil
Nil
|
-
-
|
-
5
|
407.
|
8471
|
CD –Writers
|
Nil
|
-
|
-
|
408.
|
8472 90
|
The following goods, namely:-
(i) Cash dispenser or automatic bank note dispenser;
(ii) Parts and components of the goods mentioned at (i)
|
Nil
Nil
|
-
-
|
-
5
|
409.
|
8479
|
Atmospheric water generator
|
5%
|
-
|
-
|
410.
|
8479 30 00
|
All goods
|
5%
|
-
|
-
|
411.
|
85
|
Integrated decoder receiver, also known as set top box
|
5%
|
-
|
-
|
412.
|
85
|
MP3 or MP4 or MPEG 4 player with or without radio or video reception
facility
|
5%
|
-
|
-
|
413.
|
85 or any other Chapter
|
Goods specified in List 30
|
5%
|
-
|
52 or 53 or 55, and 62
|
414.
|
85 or any other Chapter
|
Television equipment, cameras and other equipment for taking films, imported
by a foreign film unit or television team
|
Nil
|
Nil
|
63
|
415.
|
85 or any other Chapter
|
Photographic, filming, sound recording and radio equipment, raw films,
video tapes and sound recording tapes of foreign origin, if imported into
India after having been exported therefrom
|
Nil
|
Nil
|
64
|
416.
|
85 or any other Chapter
|
The wireless apparatus, accessories and parts specified in List 31, imported
by a licensed amateur radio operator
|
5%
|
-
|
65
|
417.
|
85 or any other Chapter
|
The following goods, namely:-
(1) Mono or Bi polar Membrane electrolysers and parts thereof including
secondary brine purification components, jumper switches, filtering elements
for hydrogen filters and any other machinery, required for, -
(i) modernization by using membrane cell technology, of an existing caustic
soda unit or caustic potash unit, or
(ii) capacity expansion of an existing caustic soda unit or caustic potash
unit using membrane cell technology or
(iii) setting up of a new caustic unit soda or caustic potash unit using
membrane cell technology;
(2) Membrane and parts thereof for replacement of worn out membranes
in an industrial plant based on membrane cell technology.
|
5%
|
-
|
66
|
418.
|
85 or any other Chapter
|
Goods imported for being tested in specified test centres
|
Nil
|
Nil
|
67
|
419.
|
84 or 85
|
(1) Newspaper page transmission and reception facsimile system or equipment;
(2) Telephoto transmission and reception system or equipment
|
5%
|
-
|
68
|
420.
|
85
|
One set of pre-recorded cassettes accompanying books for learning languages
and essential complement to such books
|
Nil
|
-
|
-
|
421.
|
85
|
Audio cassettes, if recorded with material from books, newspaper or magazines,
for the blind
|
Nil
|
-
|
-
|
422.
|
85
|
Deflection components for use in colour monitors for computers or for
use in PCBs of colour monitors for computers
|
Nil
|
-
|
5
|
423.
|
Any Chapter
|
Batteries for goods as specified against S. No. 274 in the Table to the
notification of the government of India in the Ministry of Finance (Department
of Revenue), No.12/2012-Central Excise, dated 17th March, 2012
|
Nil
|
6%
|
5 and 69
|
424.
|
8501 10 12
|
Stepper Motors for use in the manufacture of goods falling under heading
84.71
|
Nil
|
-
|
5
|
425.
|
8507 90
|
Battery separators
|
5%
|
-
|
-
|
426.
|
8517 70 or 8529 90 90
|
Parts of Cellular Phones and Radio Trunking terminals
|
5%
|
-
|
-
|
427.
|
8523
|
CD-ROMs containing books of an educational nature, journals, periodicals
(magazines) or newspapers
|
Nil
|
-
|
-
|
428.
|
8523
|
Recorded magnetic tapes and floppy diskettes, imported by the University
Grants Commission for use in computers
|
5%
|
Nil
|
70
|
429.
|
85 or any other Chapter
|
Parts and components of Digital Still Image video Cameras capable of
recording video with minimum resolution of 800 x 600 pixels, at minimum
23 frames per second, for at least 30 minutes in a single sequence, using
the maximum storage (including the expanded) capacity.
|
5%
|
-
|
5
|
430.
|
8529
|
Parts of Set-top Box, for use in the manufacture of Set-top Box, namely:-
(i)Tuner
(ii) RF modulator
(iii) Remote control unit
(iv) SMPS power board
(v) IR module;
|
Nil
|
-
|
5
|
431.
|
Any Chapter
|
The following goods, namely:-
(i) parts, components and accessories for the manufacture of mobile handsets;
(ii) sub-parts for the manufacture of items mentioned at (i) above;
(iii) parts or components for the manufacture of battery chargers, PC
connectivity cables, Memory cards and hands-free headphones of mobile handsets;
and
(iv) Sub-parts for the manufacture of items mentioned at (iii) above.
Explanation. - For the purposes of this entry, mobile handsets include
cellular phones.
|
Nil
|
Nil
|
5
|
432.
|
8529
|
LCD (Liquid crystal display) and LED
(Light Emitting Diode) TV Panels of 20 inches and above
|
Nil
|
-
|
-
|
433.
|
8540 71 00
|
Magnetron of up to 1KW used for the manufacture of domestic microwave
ovens
|
5%
|
-
|
5
|
434.
|
86
|
Loco simulators
|
5%
|
-
|
-
|
435.
|
86 or any Chapter
|
Train protection and warning system
|
7.5%
|
-
|
-
|
436.
|
86040000
|
Track machines and parts
|
7.5%
|
-
|
-
|
437.
|
8703
|
Motor cars and other motor vehicles principally designed for the transport
of persons (other than those of heading 87.02), including station wagons
and racing cars, new, which have not been registered anywhere prior to importation,
If imported,-
(1) As a Completely Knocked Down (CKD) kit containing all the necessary
components, parts or sub-assemblies,
for assembling a complete vehicle, with,-
(a) engine, gearbox and transmission mechanism not in a pre-assembled
condition;
(b) engine or gearbox or transmission mechanism in Pre-assembled form
but not mounted on a chassis or a body assembly.
(2) in any other form,-
(a) with FOB value more than US$ 40000 and with engine capacity more
than 3000 cc for petrol-run vehicles and more than 2500 cc for diesel-run
vehicles;
(b) other than (a) above
|
10%
30%
75%
60%
|
_
-
-
-
|
_
-
-
-
|
438.
|
Any Chapter
|
Lithium ion automotive battery for manufacture of Lithium ion battery
packs for supply to the manufacturers of hybrid and electric vehicle
|
-
|
6%
|
5
|
439.
|
Any Chapter
|
The following goods for use in the manufacture of goods specified against
S. No. 296 in the Table to the notification of the Government of India in
the Ministry of Finance ( Department of Revenue), No. 12/2012- Central Excise,
dated 17th march, 2012, namely:-
(i) Battery pack;
(ii) Battery Charger;
(iii) AC or DC Motor;
(iv) AC or DC Motor Controller
|
Nil
|
6%
|
5
|
440.
|
Any Chapter
|
The following goods for use in the manufacture of goods specified against
S. No. 297 in the Table to the notification of the Government of India in
the Ministry of Finance ( Department of Revenue), No. 12/2012- Central Excise,
dated 17th march, 2012, namely:-
(i) Battery pack;
(ii) Battery Charger;
(iii) AC or DC Motor;
(iv) AC or DC Motor Controller;
(v) Engine for HV ( Atkinson cycle);
(vi) Transaxle for HV ( split power device);
(vii) Power Control unit ( inverter, AC/DC converter, condenser);
(viii) Control ECU for HV, Generator;
(ix) Brake system for recovering;
(x) Energy Monitor;
(xi) Electric Compressor
|
Nil
|
6%
|
-
|
441.
|
8703
|
Golf cars
|
10%
|
-
|
-
|
442.
|
8704
|
Refrigerated motor vehicles
|
Nil
|
-
|
-
|
443.
|
8711
|
Motor cycles (including mopeds) and cycles fitted with an auxiliary motor,
with or without side cars, and side cars, new, which have not been registered
anywhere prior to importation,-
(1) as a completely knocked down (CKD) kit
containing all the necessary components, parts
or sub-assemblies, for assembling a complete
vehicle, with,-
(a) engine, gearbox and transmission
mechanism not in a pre-assembled
condition;
(b) engine or gearbox or transmission
mechanism in pre-assembled form, not
mounted on a body assembly.
(2) in any other form.
|
10%
30%
60%
|
-
-
-
|
-
-
-
|
444.
|
87149100, 871492,
871493,
87149400,
871495,
87149600,
871499
|
All goods other than Bicycle parts and components
|
10%
|
-
|
-
|
445.
|
88
|
Gliders, or simulators of aeroplanes or simulators of helicopters
|
Nil
|
-
|
-
|
446.
|
88 or any other Chapter
|
Parts of gliders or simulators of aircrafts (excluding rubber tyres and
tubes of gliders)
|
Nil
|
-
|
71
|
447.
|
88 or any Chapter
|
Raw materials -
(a) for manufacture or servicing of aircraft falling under heading 88.02;
(b) for manufacture of parts of aircraft at (a)
|
Nil
|
-
|
72
|
448.
|
88 or any Chapter
|
Parts and testing equipment, for maintenance repair, and overhauling
of aircraft falling under heading 8802, by the units engaged in such activities
|
Nil
|
Nil
|
73
|
449.
|
88 or any other Chapter
|
The following goods, namely:-
(a) Satellites and payloads;
(b) Scientific and technical instruments, apparatus, equipments (including
computers and computer software), accessories, parts, components, spares,
tools, mock ups and modules, raw materials and consumables required for
launch vehicles and for satellites and payloads
(c) Ground equipment brought for testing of (a)
|
Nil
|
Nil
|
74
|
450.
|
8802 (except 8802 60 00)
|
All goods
|
Nil
|
-
|
75
|
451.
|
8802
|
Helicopters
|
2.5 %
|
-
|
-
|
452.
|
8802 (except 8802 60 00)
|
All goods
|
Nil
|
-
|
76
|
453.
|
8802 (except 8802 60 00)
|
All goods
|
2.5%
|
-
|
77
|
454.
|
Any Chapter
|
Parts (other than rubber tubes), of aircraft of heading 8802
|
Nil
|
-
|
21
|
455.
|
Any Chapter
|
Parts (other than rubber tyres and tubes), of aircraft of heading 8802
|
2.5%
|
-
|
-
|
456.
|
Any Chapter
|
Parts (other than rubber tubes), of aircraft of heading 8802
|
Nil
|
-
|
22
|
457.
|
8803 10 00, 8803 20 00, 8803 30 00
|
All goods
|
2.5%
|
-
|
-
|
458.
|
89
|
Barges or pontoons imported along with ships for the more speedy unloading
of imported goods and loading of export goods
|
Nil
|
-
|
78
|
459.
|
89 or any Chapter
|
Capital goods and spares thereof, raw materials, parts, material handling
equipment and consumables, for repairs of ocean-going vessels by a ship
repair unit registered with the Director General of Shipping, Government
of India
|
Nil
|
Nil
|
79
|
460.
|
89 or any Chapter
|
Spare parts and consumables for repairs of ocean going vessels registered
in India.
|
Nil
|
Nil
|
80
|
461.
|
8901
|
All goods (excluding vessels and other floating structures as are imported
for breaking up)
|
Nil
|
-
|
81
|
462
|
8901
|
Foreign going vessel
|
Nil
|
Nil
|
82
|
463.
|
8902 00 10
|
Trawlers and other fishing vessels
|
Nil
|
-
|
-
|
464.
|
8902, 89040000 or 8905 90
|
All goods (excluding vessels and other floating structures as are imported
for breaking up)
|
5%
|
-
|
81
|
465.
|
89051000
|
All goods
|
Nil
|
-
|
-
|
466.
|
8906
|
All goods (excluding vessels and other floating structures as are imported
for breaking up)
|
Nil
|
-
|
81
|
467.
|
890710 00
|
All goods
|
Nil
|
-
|
-
|
468.
|
89080000
|
All goods
|
5%
|
-
|
-
|
469.
|
Any Chapter
|
Raw materials and parts, for use in the manufacture of goods falling
under heading 8901,8902,8904,8905( except sub-heading 890520) or 8906, in
accordance with the provisions of section 65 of the Customs Act, 1962(52
of 1962)
|
Nil
|
Nil
|
83
|
470.
|
Any Chapter
|
Parts, for repairs of dredgers
|
Nil
|
-
|
-
|
471.
|
90
|
Coronary stents and coronary stent systems for use with cardiac catheters
|
Nil
|
-
|
-
|
472.
|
90
|
Endovascular stents
|
Nil
|
-
|
-
|
473.
|
9018, 9019, 9020, 9021 or 9022
|
Goods required for medical, surgical, dental or veterinary use
Explanation.- For the purposes of this entry, the term "Goods" refers
to medical instruments / appliances required for medical, surgical, dental
or veterinary use only and do not refer to Parts and spares thereof.
|
5%
|
-
|
-
|
474.
|
90 or any other Chapter
|
(i) Parts required for the manufacture of the goods at S. No 473; and
(ii) accessories of the goods at S. No 473.
|
5%
5%
|
-
-
|
5
-
|
475.
|
Any Chapter
|
Polypropylene, Stainless steel Strip and Stainless steel capillary tube
required for manufacture of syringes, needles, catheters and cannulae
|
2.5%
|
-
|
5
|
476.
|
Any Chapter
|
Stainless steel tube and wire, cobalt chromium tube, Hayness alloy-25
and polypropylene mesh required for manufacture of Coronary stents / coronary
stent system and artificial heart valve
|
Nil
|
-
|
5
|
477.
|
Any Chapter
|
Parts and components required for manufacture of Blood Pressure Monitors
and blood glucose monitoring system ( Gluco-meters)
|
2.5%
|
-
|
5
|
478.
|
Any Chapter
|
The following goods, namely:-
(a) Ostomy products (Appliances) for managing Colostomy, Illcostomy,
Ureterostomy, Illeal Conduit Urostomy Stoma cases such as bags, belts, adhesives
seals or discs or rolls, adhesive remover, bag closing clamps, karaya seals
paste or powder, irrigation sets, plastic or rubber faceplates, flanges,
male or female urinary incontinency sets, skin gels, in parts or sets;
(b) Accessories of the medical equipment at (a) ;
(c) Parts required for the manufacture of the medical equipment at (a)
|
5%
5%
5%
|
-
-
Nil
|
-
-
5
|
479.
|
90 or any other Chapter
|
Medical and surgical instruments, apparatus and appliances including
spare parts and accessories thereof
|
Nil
|
Nil
|
84
|
480.
|
90 or any Chapter
|
Artificial Heart (left ventricular assist device)
|
5%
|
-
|
-
|
481.
|
90 or any Chapter
|
Patent ductus arteriosus/ Atrial septal defect occlusion device
|
5%
|
-
|
-
|
482.
|
90 or any other Chapter
|
(a) The following goods for physically disabled persons, namely:
(i) Crutches;
(ii) Wheel chairs
(iii) Walking frames;
(iv) Tricycles;
(v) Braillers;
(vi) Artificial limbs
(b) Parts of goods at (a)
|
Nil
Nil
|
-
-
|
-
-
|
483.
|
90 or any other Chapter
|
Parts for the manufacture of hearing aids including deaf aids
|
Nil
|
-
|
-
|
484.
|
90 or any other Chapter
|
Equipment, parts or accessories required for initial setting up, repair
or maintenance of a planetarium
|
_
|
Nil
|
85
|
485.
|
90 or any Chapter
|
Hospital Equipment (equipment, apparatus and appliances, including spare
parts and accessories thereof, but excluding consumable items) for use in
specified hospitals
|
5%
|
6%
|
86
|
486.
|
90 or any other Chapter
|
Blood Glucose Monitoring System(Glucometer) and test strips
|
5%
|
-
|
-
|
487.
|
90 or any other Chapter
|
Life saving medical equipment including accessories or spare parts or
both of such equipment for personal use
|
5%
|
6%
|
87
|
488.
|
90 or any other Chapter
|
Assistive devices, rehabilitation aids and other goods for disabled,
specified in List 32
|
Nil
|
-
|
-
|
489.
|
90 or any other Chapter
|
Survey (DGPS) instruments, 3D modelling software for ore body simulation
cum mine planning and exploration (geophysics and geochemistry) equipment
required for surveying and prospecting of minerals
|
2.5%
|
-
|
88
|
490.
|
9022
|
X-Ray Baggage Inspection Systems and parts thereof
|
Nil
|
-
|
89
|
491.
|
91 or 9804 90 00
|
Braille watches and braille one-day alarm clocks
|
Nil
|
-
|
-
|
492.
|
91
|
Parts and cases of braille watches, for the manufacture of Braille watches
|
Nil
|
-
|
5
|
493.
|
9108, 9110 or 9114 30 10
|
Watch dials and watch movements
|
5%
|
-
|
-
|
494.
|
93
|
Air rifles or air pistols of 0.177 calibre
|
Nil
|
Nil
|
-
|
495.
|
93
|
Air pellets of air rifles or air pistols, of 0.177 calibre
|
Nil
|
Nil
|
-
|
496.
|
9405 50 40
|
Solar lanterns or solar lamps
|
5%
|
-
|
-
|
497.
|
95 or any other Chapter
|
(a) Synthetic tracks and artificial surfaces of heading 9506;
(b) Equipment required for installation of (a)
|
Nil
|
Nil
|
90
|
498.
|
95 or any Chapter
|
The following goods for laying synthetic tracks and artificial surfaces
of heading 95.06, namely :-
(i) Asphalt resurfacer;
(ii) Acrylic resurfacer;
(iii) Cushion coat;
(iv) Acrylic colour concentrate;
(v) Acrylic marking paint; and
(vi) Polytan in powder or granule form
|
Nil
|
Nil
|
91
|
499.
|
95
|
Requisites for games and sports
|
Nil
|
Nil
|
92
|
500.
|
9503
|
Parts of electronic toys for the manufacture of electronic toys, namely,
parts of electric trains, including tracks, signals and other accessories
therefor
|
5%
|
-
|
5
|
501.
|
9503
|
Parts of electronic toys for the manufacture of electronic toys, other
than those of reduced size ("scale") model assembly kits, whether or not
working models, other construction sets and constructional toys, toys representing
animals or non-human creatures, toy musical instruments and apparatus, other
toys put up in sets or outfits, other toys and models incorporating a motor
|
5%
|
-
|
5
|
502.
|
9504
|
Parts of video games for the manufacture of video games
|
5%
|
-
|
5
|
503.
|
9506
|
(i) Snow-skis and other snow-ski equipment
(ii) Water-skis, surf-boards, sailboards and other water-sport equipment
|
Nil
|
-
|
-
|
504.
|
9608
|
Parts of writing instruments
|
5%
|
-
|
-
|
505.
|
Any Chapter
|
Postage stamps, unused
|
Nil
|
-
|
-
|
506.
|
9801
|
Goods required for-
(i) fertiliser projects;
(ii) coal mining projects;
(iii) iron ore pellet plants/projects and iron ore beneficiation plants/projects
(iv) power generation projects including gas turbine power projects (excluding
captive power plants set up by projects engaged in activities other than
in power generation);
(v) barge mounted power plants;
(vi) power transmission, sub-transmission or distribution projects;
|
Nil
Nil
2.5%
5%
5%
5%
|
-
-
-
-
-
-
|
-
-
-
-
-
-
|
507.
|
9801
|
Goods required for setting up of any Mega Power Project, so certified
by an officer not below the rank of a Joint Secretary to the Government
of India in the Ministry of Power, that is to say,
(a) a thermal power plant of a capacity of 700MW or more, located in
the States of Jammu and Kashmir, Sikkim, Arunachal Pradesh, Assam, Meghalaya,
Manipur, Mizoram, Nagaland and Tripura; or
(b) a thermal power plant of a capacity of 1000MW or more, located in
States other than those specified in (a); or
(c) a hydel power plant of a capacity of 350MW or more, located in the
States of Jammu and Kashmir, Sikkim, Arunachal Pradesh, Assam, Meghalaya,
Manipur, Mizoram, Nagaland and Tripura; or
(d) a hydel power plant of a capacity of 500MW or more, located in States
other than those specified in clause (c)
|
Nil
|
Nil
|
93
|
508.
|
9801
|
Goods required for the expansion of any existing Mega Power project so
certified by an officer not below the rank of a Joint Secretary to the Government
of India in the Ministry of Power.
Explanation.- For the purposes of this entry, Mega Power Project
means a project as defined in S. No. 507
|
2.5%
|
Nil
|
93
|
509.
|
9801
|
Goods required for-
(a) Project for LNG Re-gasification Plant
(b) Aerial passenger ropeway project
|
5%
5%
|
-
-
|
-
-
|
510.
|
9801
|
All goods
|
5%
|
-
|
-
|
511.
|
9801
|
Goods required for setting up of any Nuclear Power Project specified
in List 33, having a capacity of 440 MW or more, as certified by an officer
not below the rank of a Joint Secretary to the Government of India in the
Department of Atomic Energy
|
Nil
|
Nil
|
94
|
512.
|
9801
|
Drinking Water Supply Projects for supply of water for human or animal
consumption
Explanation.- For the purposes of this entry, "Drinking Water Supply
Project" includes a plant for desalination, demineralization or purification
of water or for carrying out any similar process or processes intended to
make the water fit for human or animal consumption, but does not include
a plant supplying water for industrial purposes.
|
Nil
|
Nil
|
-
|
513.
|
9801
|
Liquefied natural gas (LNG) facility project of M/s Ratnagiri Gas and
Power Private Limited for their power project at Dabhol
Explanation.- For the purpose of this exemption, Liquefied natural
gas (LNG) facility project includes goods for any or all series of operations
starting with unloading of LNG from specialized vessels, their subsequent
transfer to LNG storage tanks and finishing with re-gasification of the
LNG before feeding the natural gas to the Ratnagiri Gas and Power Private
Limited for the purpose of generating power at their power project at Dabhol
|
Nil
|
Nil
|
95
|
514.
|
9801
|
All items of equipment for National Automotive Testing and Research and
Development Infrastructure Project (NATRIP)
|
Nil
|
Nil
|
96
|
515.
|
9801
|
Goods required for installation of mechanized handling systems and pallet
racking systems in „mandis‟ and warehouses for food grains, sugar and horticultural
produce
|
5%
|
Nil
|
-
|
516.
|
9804
|
The following goods, imported by post or air, for personal use, namely:
-
(a) the life saving drugs or medicines (including diagnostic test kits)
specified in List 4;
(b) other life saving drugs or medicines
|
Nil
Nil
|
Nil
Nil
|
-
8
|
517.
|
9804
|
All Goods intended for personal use, imported by post or air and exempted
from any prohibition in respect of the imports thereof under the Foreign
Trade (Development and Regulation) Act, 1992 (22 of 1992) but excluding
articles falling under heading 9803.
|
10%
|
-
|
-
|
518.
|
Any Chapter
|
Used bona fide personal and household effects belonging to a deceased
person
|
Nil
|
Nil
|
97
|
519.
|
Any Chapter
|
Goods imported through postal parcels, packets and letters, the duty
payable on which is not more than one hundred rupees
|
Nil
|
Nil
|
-
|
520.
|
Any Chapter
|
Archaeological specimens, photographs, plaster casts or antiquities,
intended for exhibition for public benefit in a museum managed by the Archaeological
Survey of India or by a State Government
|
Nil
|
Nil
|
98
|
521.
|
Any Chapter
|
The following goods, namely:-
(a) Nylon gut
(b) PU or nylon grip sheets for hockey sticks
(c) Butyl bladders for inflatable balls
(d) Willow clefts, ashwood or beechwood
(e) Cork bottoms
(f) Synthetic rubber bladder
(g) Manau cane
(h) Table tennis rubber
(i) Table tennis bat handles
(j) Table tennis blade
(k) PU Leather Cloth/PU Laminated with cotton for inflatable balls;
(l) Extra tec (cricket bat facing tape);
(m) Resin hardener TTP-33S and release paper for composite hockey sticks;
(n) Table tennis glue;
(o) Evazote foam for protective equipments e.g. leg guards, thigh guards;
(p) plywood for carrom board
|
Nil
|
-
|
99
|
Provided that nothing contained in this notification shall apply to -
- the goods specified against serial no. 21 of the said Table on or after
the 1st day of April, 2013;
- the goods specified against serial no. 76, 77 and 78 of the said Table on
or after the 1st day of April, 2012;
- the goods specified against serial no. 123 of the said Table on or after
the 1st day of April, 2014;
- the goods specified against serial no. 251 of the said Table on or after
the 16th day of January, 2013;
- the goods specified against serial no. 384 of the said Table on or after
the 1st day of April, 2014;
- the goods specified against serial no.385 of the said Table on or after
the 1st day of April,2014;
- the goods specified against serial no. 439 of the said Table on or after
the 1st day of April, 2013.
- the goods specified against serial no. 440 of the said Table on or after
the 1st day of April, 2013.
- the goods specified against serial no. 506(i) of the said Table on or after
the 1st day of April, 2015;
Explanation.-(I) For the purposes of this notification, the
rate specified in column (4) or column (5) of the said Table is ad valorem rate,
unless otherwise specified;
(II) For the removal of doubts,-
- “–“ appearing in column (4) means basic customs duty leviable on the
goods as per the First Schedule to the Customs Tariff Act, 1975 (51 of 1975)
read with any other notifications issued under sub-section (1) of section 25
of the Customs Act, 1962 (52 of 1962), for the time being in force.
- “–” appearing in column (5) means additional duty equal to duty of excise
leviable on the goods as per the First Schedule to the Central Excise Tariff
Act, 1985 (5 of 1986) read with any other notifications issued under sub-section
(1) of section 5A of the Central Excise Act, 1944 (1 of 1944), for the time
being in force.
ANNEXURE
Condition No.
|
Conditions
|
1.
|
The rate of duty specified in column (4) shall apply to such quantity
of imports for which an importer holds a Tariff Rate Quota Allocation Certificate
issued by the EXIM Facilitation Committee in the Directorate General Of
Foreign Trade in accordance with the procedure as may be specified by the
EXIM Facilitation Committee in the Directorate General Of Foreign Trade
from time to time through a Public Notice.
|
2.
|
If the importer gives a declaration that such material is for the purposes
of sowing or planting only.
|
3A.
|
(a) if imported by a sugar factory or a sugar refinery.
Explanation.- For the purpose of this notification-
(i) "sugar factory" shall have the same meaning as assigned to it in
Section 2(c) of the Sugarcane (Control) Order, 1966;
(ii) "sugar refinery" means a unit which is engaged in the manufacture
of refined sugar starting from the stage of raw sugar".
(b) If imported by any person other than at (a) above:
(i) the importer shall produce to the Deputy Commissioner of Customs
or the Assistant Commissioner of Customs, as the case may be, a valid contract
or agreement with a sugar factory or sugar refinery for refining of such
raw sugar and shall furnish a bond to the effect that the said raw sugar
shall be used for the said purpose;
(ii) the bond shall be discharged by the Deputy Commissioner of Customs
or the Assistant Commissioner of Customs, as the case may be, on production
of a certificate from the Central Excise authorities having jurisdiction
over such sugar factory within a period of three months from the date of
import of such raw sugar that the entire quantity of imported raw sugar
has been refined and
(iii) in the event of his failure to comply with the above conditions,
the importer shall be liable to pay, in respect of such quantity of the
raw sugar as is not proven to have been refined, an amount equal to the
difference between the duty leviable on such quantity but for the exemption
contained herein.";
|
3B.
|
If the importer produces before the Deputy Commissioner of Customs or
the Assistant Commissioner of Customs, as the case may be, a proof to show
that the contract for import of such sugar is duly registered with Agricultural
& processed food Products Export Development Authority (APEDA).
|
3C.
|
If the importer, at the time of import, produces a certificate from a
Chartered Accountant to the effect that the importer is a bulk consumer.
Explanation,- For the purpose of this notification,-
(i) bulk consumer is a person, establishment or industrial unit using
or consuming more than ten quintals of sugar per month as a raw material
for production or consumption or use in any manner other than sale.
(ii) the said certificate shall be issued by the Chartered Accountant
after taking into account monthly use or consumption of sugar by such person,
establishment or unit in the last twelve months; and
(iii) "Chartered Accountant" shall have the same meaning as assigned
to it in clause (b) of sub-section (1) of section 2 of the Chartered Accountant
Act, 1949.
|
4.
|
If the importer, is registered with the Directorate of Vanaspati, Vegetable
Oils and Fats in the Department of Food and Public Distribution in the Government
of India.
|
5.
|
If the importer follows the procedure set out in the Customs (Import
of Goods at Concessional Rate of Duty for Manufacture of Excisable Goods)
Rules, 1996.
|
6.
|
If,- (a) the goods are imported by an exporter of sea-food products for
use in processing sea- food products for export and the said exporter is
registered with the Marine Products Export Development Authority;
(b)the total value of the goods imported shall not exceed 1% of the FOB
value of exports of sea-food products exported during the preceding financial
year; and
(c) the importer produces a certificate from the Marine Products Export
Development Authority, certifying the value of exports made during the financial
year referred to in clause (b) above, and also the value and quantity of
goods already imported under this notification during the current financial
year.
|
7.
|
If the importer furnishes an undertaking to the Deputy Commissioner of
Customs or the Assistant Commissioner of Customs, as the case may be, that
the wine shall be used as sacramental wine.
|
8.
|
If the importer produces before the Deputy Commissioner of customs or
the Assistant Commissioner of Customs, as the case may be, an assay certificate
issued by the mining company, giving details of composition.
|
9.
|
If,- (a)the goods are imported by-
(i)the Ministry of Surface Transport, or
(ii) a person who has been awarded a contract for the construction of
roads in India by or on behalf of the Ministry of Surface Transport, by
the National Highway Authority of India, by the Public Works Department
of a State Government, Metropolitan Development Authority or by a road construction
corporation under the control of the Government of a State or Union Territory;
or
(iii)a person who has been named as a sub-contractor in the contract
referred to in (ii) above for the construction of roads in India by or on
behalf of the Ministry of Surface Transport, by the National Highway Authority
of India, by Public Works Department of a State Government, Metropolitan
Development Authority or by a road construction corporation under the control
of the Government of a State or Union Territory; (b) the importer, at the
time of importation, furnishes an undertaking to the Deputy Commissioner
of Customs or the Assistant Commissioner of Customs, as the case may be,
to the effect that he shall use the imported goods exclusively for the construction
of roads and that he shall not sell or otherwise dispose of the said goods,
in any manner, for a period of five years from the date of their importation:
Provided that the said Deputy Commissioner of Customs or the Assistant
Commissioner of Customs, may allow the importer to sell or dispose of any
of the imported goods on payment of customs duties at the rates applicable
at the time of import but for this exemption, on the depreciated value of
the goods to be calculated @ 5% on straight line method for each completed
quarter starting from the date of importation of the said goods till the
date of their sale subject to the condition that the concerned Ministry,
Authority, Department or Corporation referred to in condition (a) above
certifies that said goods in the project, for which duty free import was
allowed, are no longer required for the project.
(c) in case of goods of serial no.12 and 13 of List 16, the importer,
at the time of importation of such goods, also produces to the Deputy Commissioner
of Customs or the Assistant Commissioner of Customs, as the case may be,
a certificate from an officer not below the rank of a Deputy Secretary to
the Government of India in the Ministry of Surface Transport (Roads Wing),
or an officer not below the rank of Chief Engineer of the National Highways
Authority of India, to the effect that the imported goods are required for
construction of roads in India.
|
10.
|
If,- (a) the goods are imported by an individual for personal use;
(b) it is certified in the Form below, by the Director General or Deputy
Director General or Assistant Director General, Health Services, New Delhi,
Director of Health Services of the State Government or the District Medical
Officer/Civil Surgeon of the district, in each individual case, that the
goods are life saving drugs or medicines; and
(c) the importer produces the said certificate to the Deputy Commissioner
of Customs or the Assistant Commissioner of Customs, as the case may be,
at the time of clearance, or gives an undertaking as acceptable to the Deputy
Commissioner or the Assistant Commissioner to furnish the said certificate
within such period as may be specified by the Deputy Commissioner or the
Assistant Commissioner, failing which to pay duty leviable thereon.
Form
Certficate No....………. of …...…….. (year) Certified that the drug / medicine………………….(name
of the drug / medicine) being imported by ………………................... is a
life saving drug / medicine and exemption from the payment of customs duty
is recommended.
Signature with date of Director General / Deputy Director General / Assistant
Director General, Health Services, New Delhi or Director of Health Services
or District Medical Officer/Civil Surgeon.
|
11.
|
If the importer at the time of import-
(1) furnishes a certificate from an officer not below the rank of a Deputy
Secretary to the Government of India in the Department of Atomic Energy,
Government of India, to the effect that the imported goods (in respect of
description, quantity and technical specifications) are required for the
manufacture of laser and laser based instrumentation; and (2) furnishes
an undertaking to the Deputy Commissioner of Customs or the Assistant Commissioner
of Customs, as the case may be, to the effect that the imported goods shall
be used for the above purpose and he shall pay, on demand, in the event
of his failure to use the imported goods for the above purpose, an amount
equal to the difference between the duty leviable on such quantity of the
imported goods but for the exemption under this notification and that already
paid at the time of importation.
|
12.
|
If the importer produces a certificate of the Reference Standard and
copies of documents to substantiate that the organization or institution
from where the Reference Standard has been imported is approved by the World
Health Organisation or International Organisation for Standards.
|
13.
|
If,- (a) the importer produces a certificate from a duly authorised officer
of the UNICEF to the effect that the said raw materials, intermediates and
consumables are required for the manufacture of DTP vaccines; and
(b) the importer, at the time of clearance, furnishes an undertaking,
in each case, to the effect that the said raw materials, intermediates and
consumables shall be used only for the manufacture of DTP vaccines.
|
14.
|
If, at the time of importation, the importer produces to the Deputy Commissioner
of Customs or the Assistant Commissioner of Customs, as the case may be,
a certificate from the Licensing Authority to the effect that specified
quantity of such drugs and materials are required for being used in a clinical
trial for which permission has been granted by the Licensing Authority under
the provisions of the Drugs and Cosmetics Rules, 1945.
|
15.
|
If,- (a) the goods are imported,-
(i) by a manufacturer of handicrafts;
(ii) by a merchant exporter tied up with supporting manufacturer of handicrafts;
or (iii) on behalf of the said manufacturer or merchant exporter by the
Export Promotion Council for Handicrafts,
for use in the manufacture of handicrafts for export by the said manufacturers
or as the case may be, the merchant exporter and the said manufacturers
or as the case may be, merchant exporter is registered with the Export Promotion
Council for Handicrafts;
(b) the value of the goods imported does not exceed 5 per cent of the
FOB value of handicrafts exported during the preceding financial year; and
(c) the importer produces a certificate from the Export Promotion Council
for Handicrafts certifying the value of exports made during the financial
year mentioned in clause (b) above and also the description, value and quantity
of the item(s) already imported under this notification during the current
financial year
|
16.
|
If certified by the Ministry of Information and Broadcasting that the
films and video cassettes are intended for archival study, or record and
reference purposes.
|
17.
|
If, the Central Board of Film Censors or, an officer not below the rank
of a Director, All India Radio or Doordarshan, as the case may be, certifies
that the said film is predominantly educational in character.
|
18.
|
If certified by the Ministry of Defence that the film is predominantly
educational in character and is meant for training of defence personnel.
|
19.
|
The exemption shall be available subject to the condition that no remittance
s are made or required to be made by the importer relating to the import
of the said goods.
|
20.
|
If, imported for the manufacture of Copper - T contraceptives.
|
21.
|
If, - (i) imported for servicing, repair or maintenance of aircraft,
which is used for operating scheduled air transport service or the scheduled
air cargo service, as the case may be; or (ii) the parts are brought into
India for servicing, repair or maintenance of an aircraft mentioned in clause
(ii) of Condition No.73.
Explanation.- The expressions "scheduled air transport service" and "scheduled
air cargo service" shall have the meanings respectively assigned to them
in Condition No.73.
|
22.
|
If,- (i) imported for servicing, repair or maintenance of aircraft imported
or procured by Aero Club of India; or
(ii) imported for servicing, repair or maintenance of aircraft, which
are used for flying training purposes or for operating non-scheduled (passenger)
service or non-scheduled (charter) services;
(iii) imported for servicing, repair or maintenance of aircraft imported
or procured by the Airports Authority of India for flight calibration purposes
(iv) the importer furnishes an undertaking to the Deputy Commissioner
of Customs or the Assistant Commissioner of Customs, as the case may be,
at the time of importation that:- a. the imported goods shall be used for
the specified purpose only; and
b. he shall pay on demand, in the event of his failure to use the imported
goods for the specified purpose, an amount equal to the duty payable on
the said goods but for the exemption under this notification.
Explanation. - The expressions, "Aero Club of India", "operator", "non-scheduled
(passenger) services" and "non-scheduled (charter) services" shall have
the meanings respectively assigned to them in Condition No. 75 or 76.
|
23.
|
If the duty amount per kg calculated at the rate of 70% ad valorem,
is more than Rs. 49/- per kg.
|
24.
|
If, (a) the goods are imported by a manufacturer of textile garments
or leather garments for use in the manufacture of textile garments or leather
garments for export by that manufacturer and that the said manufacturer
is registered with the Apparel Export Promotion Council or Council for Leather
Exports, or as the case may be, Handloom Export Promotion Council;
(b) the total value of goods imported shall not exceed 3 percent of the
FOB value of textile garments (other than handloom garments) or leather
garments, as the case may be, or 5 percent of the FOB Value of handloom
garments exported during the preceding financial year; however, the value
of lining and inter-lining materials imported shall not exceed 2 percent
of the said FOB value.
(c) the importer produces a certificate from the Apparel Export Promotion
Council or Council for Leather Exports, as the case may be, or Handloom
Export Promotion Council, certifying the value of exports made during the
financial year mentioned in clause (b) above, and also the value and quantity
of goods already imported under this notification during the current financial
year;
(d) the importer produces a certificate from Apparel Export Promotion
Council or Council for Leather Exports, as the case may be, or Handloom
Export Promotion Council, certifying that the lining and inter-lining materials
shall not be put to any other use or sold in the market except in the manufacture
of textile garments or leather garments; and
(e) there is a doubt as to the usability of lining and interlining materials
in relation to the export product, the Commissioner of Customs, for reasons
to be recorded in writing, orders drawal of sample at the time of export
to verify such use;
|
25.
|
If,- (a) the pulp of wood is imported for the manufacture of newsprint,
that is to say, paper intended for the printing of newspapers, books and
periodicals; and
(b) the newsprint manufactured in terms of (a) above is supplied to a
newspaper. Explanation.- For the purpose of this condition, "newspaper"
means a newspaper registered by the Registrar of Newspapers for India under
the provisions of the Press and Registration of Books Act, 1867 (25 of 1867).
|
26.
|
If the importer, at the time of import is an establishment registered
with the Registrar of Newspapers, India (RNI).
|
27.
|
If- (a) the goods are imported
(i) by a manufacturer of textile garments or leather garments; or
(ii) by a merchant exporter tied up with supporting manufacturer of textile
garments or leather garments,
For use in the manufacture of textile garments or leather garments for
export by that manufacturer directly or through a merchant exporter, as
the case may be, and that the said manufacturer or merchant exporter is
registered with the Apparel Export Promotion Council or Council for Leather
Exports, or as the case may be, handloom Export Promotion Council; and
(b) the entitlement certificate issued by respective export promotion
councils shall carry the name of supporting manufacturers along with the
name of the merchant-exporter in case the goods are exported by a merchant
exporter.
|
28.
|
If,-
(a) the goods are imported by a manufacturer of handloom made ups or
polyester made ups for use in the manufacture of said goods for export by
that manufacturer and the said manufacturer is registered with the handloom
Export Promotion Council or Cotton Textile Export Promotion Council or Synthetic
& Rayon Textile Export Promotion Council as the case may be;
(b) the total value of goods imported shall not exceed 5 percent of the
FOB value of handloom made ups or 1 percent of the FOB value of cotton made
ups or polyester made ups as the case may be, exported during the preceding
financial year;
( C ) the importer produces a certificate from the Handloom Export Promotion
Council or Cotton Textile Export Promotion Council or Synthetic & Rayon
Textile Export Promotion Council certifying the value of exports made during
the financial year mentioned in sub-condition (b), and also the value and
quantity of goods already imported under this notification during the current
financial year.
|
29.
|
If at the time of importation, the importer produces a certificate from
an officer, not below the rank of Director in the Marine Products Export
Development Authority, in the Ministry of Commerce and Industry, Government
of India, to the effect that that the imported goods constitute monofilament
long line system for tuna fishing and are intended to be used for tuna fishing.;
|
30.
|
If, - (a) the total value of goods imported shall not exceed 1 per cent
of the FOB value of exports of carpets during the preceding financial year;
(b) the importer produces a Certificate from Carpet Export Promotion
council certifying the value of exports made during the preceding financial
year, mentioned in condition(a), and also the value and quantity of goods
already imported under this notification during the current financial year.
|
31.
|
If at the time of importation, the importer,-
(1) in all cases [excluding the case of the goods at item No. 9 of List
9], produces a valid registration-cum-membership certificate issued by the
Council for Leather Exports sponsored by the Government of India in the
Ministry of Commerce and Industry; and (2) furnishes an undertaking to the
Deputy Commissioner of Customs or the Assistant Commissioner of Customs,
as the case may be, to the effect that-
(a) the imported goods shall be used in the leather industry, or as the
case may be, for the manufacture of leather chemicals to be used in the
leather industry;
(b) he shall maintain an account of the imported goods, received and
consumed in the place of manufacture for the above purpose, in the manner
specified by the said Deputy Commissioner or the Assistant Commissioner;
(c) he shall, within three months or such extended period as the said
Deputy Commissioner or the Assistant Commissioner may allow, produce the
extract of the aforesaid account, duly certified by the Deputy Commissioner
of Central Excise or the Assistant Commissioner of Central Excise, as the
case may be, having jurisdiction over the factory manufacturing the goods,
to the effect that the said goods have been used for the aforesaid purpose;
and (d) he shall pay, in the event of his failure to comply with the conditions
above, an amount equal to the difference between the duty leviable on the
imported goods but for the exemption under this notification and that already
paid at the time of importation.
|
32.
|
If the importer produces a certificate from an officer not below the
rank of a Joint Director in the Ministry of Information Technology, Government
of India, mentioning the technical specifications, description and quantity
of the moulds, tools and dies and certifying that they are required for
the manufacture of electronic parts and recommending grant of exemption.
|
33.
|
If the said coins are imported with the approval of the Reserve Bank
of India and are utilised for disbursement by the Scheduled bank in accordance
with the regulations of the Reserve Bank of India, sanctioning foreign exchange
for travelers.
Explanation.- The expression "Scheduled bank" means the State Bank of
India constituted under the State Bank of India Act, 1955 (23 of 1955),
a subsidiary bank as defined in the State Bank of India (Subsidiary Banks)
Act, 1959 (38 of 1959), a corresponding new bank constituted under section
3 of the Banking Companies (Acquisition and Transfer of Undertakings) Act,
1970 (5 of 1970) or any other bank, being a bank included in the Second
Schedule to the Reserve Bank of India Act, 1934 (2 of 1934).
|
34.
|
If,-
(a) the goods are directly shipped from the country in which they were
produced and each bar has a weight of 5 kg. or above;
(b) the goods are imported in accordance with the packing list issued
by the mining company by whom they were produced;
(c) the importer produces before the Deputy Commissioner of Customs or
the Assistant Commissioner of Customs, as the case may be, an assay certificate
issued by the mining company or the laboratory attached to it, giving detailed
precious metal content in the dore bar;
(d) the gold dore bars are imported by the actual user for the purpose
of refining and manufacture of standard gold bars of purity 99.5% and above;
and
(e) the silver dore bars are imported by the actual user for the purpose
of refining and manufacture of silver bars of purity 99.9% and above.
|
35.
|
If,-
1.
(a) the duty is paid in convertible foreign currency;
(b) the quantity of import does not exceed ten kilograms of gold and
one hundred kilograms of silver per eligible passenger; and
2. the gold or silver is,-
(a) carried by the eligible passenger at the time of his arrival in India,
or
(b) imported by him within fifteen days of his arrival in India, or
(c ) is taken delivery of from a customs bonded warehouse of the State
Bank of India or the Minerals and Metals Trading Corporation Ltd., subject
to the conditions 1 ;
provided such eligible passenger files a declaration in the prescribed
form before the proper officer of customs at the time of his arrival in
India declaring his intention to take delivery of the gold or silver from
such a customs bonded warehouse and pays the duty leviable thereon before
his clearance from customs.
Explanation.- For the purposes of this notification, "eligible
passenger" means a passenger of Indian origin or a passenger holding a valid
passport, issued under the Passports Act, 1967 (15 of 1967), who is coming
to India after a period of not less than six months of stay abroad; and
short visits, if any, made by the eligible passenger during the aforesaid
period of six months shall be ignored if the total duration of stay on such
visits does not exceed thirty days and such passenger has not availed of
the exemption under this notification or under the notification being superseded
at any time of such short visits.
|
36.
|
If,- (1) zinc metal is imported within one year of the date of export
of zinc concentrate out of India; and
(2) sufficient evidence exists to establish that the zinc metal, which
is imported has in fact been obtained out of toll smelting or toll processing
of zinc concentrate exported out of India.
Explanation.- On the imports referred to in condition (1) above, the
duty shall be leviable as if the value of the said metal were equal to the
aggregate of-
(i) the toll smelting or toll processing costs, as the case may be, that
is to say,-
(a) labour charges;
(b) cost of materials (other than the cost of goods exported out of India)
used in such toll smelting or toll processing; and
(c) any other charges which are payable in connection with the toll smelting
or toll processing abroad; and
(ii) the insurance and freight charges, both ways.
|
37.
|
If,-
(1) the dies for drawing metal, acquired in exchange, are imported within
one year of the date of exportation of similar dies out of India for repairs;
and
(2) no drawback of duty has been paid on the occasion of their export.
Explanation.- On the imports referred to in condition (1) above, the
duty would be leviable as if the value of the said dies were equal to-
(i) the aggregate of-
(a) labour charges for such repair; (b) cost of materials used in such
repair ; (c) any other charges paid by the importer for repair of such dies;
and
(ii) the insurance and freight charges, both ways.
|
38.
|
If,- (a) the importer furnishes a certificate from an officer not below
the rank of Deputy Secretary to the Government of India in the Department
of Industrial Policy and Promotion in the Ministry of Commerce and Industry
to the effect that goods being imported are required for effluent treatment
plant for leather industry or handloom sector or handicraft sector, as the
case may be.
|
39.
|
If,- (i) (a) in the case of Central Power Sector Undertakings, the Chairman
of the concerned Undertaking or an officer authorized by him certifies that
the power transmission project has been approved and an officer not below
the rank of the Deputy Secretary to the Government of India in the Ministry
of Power recommends, in each case, the grant of the aforesaid exemption
to the goods for such project;
(b) in other cases, an officer not below the rank of the Chief Engineer
of the concerned Power Transmission Board or Corporation in a State certifies
that such power transmission project has been approved and an officer not
below the rank of the Secretary in a State Government concerned dealing
with the subject of power or electricity recommends, in each case, the grant
of the aforesaid exemption to the goods for such project;
(ii) in all cases, the importer furnishes an undertaking to the Deputy
Commissioner of Customs or the Assistant Commissioner of Customs, as the
case may be, to the effect that the said goods shall be used for the purpose
specified above and in the event of his failure to use the goods for power
transmission, he shall pay an amount equal to the difference between the
duty leviable on the said imported goods but for the exemption under this
notification and that already paid at the time of importation.
|
40.
|
If, at the time of importation, the importer produces to the Deputy Commissioner
of Customs or the Assistant Commissioner of Customs, as the case may be,
a certificate from the Chairman or the Managing Director or the Director
(Rolling Stock, Electrical and Signaling) or the Director (Finance) of the
Delhi Metro Rail Corporation Ltd., to the effect that –
(i) the goods are procured by or on behalf of the Delhi Metro Rail Corporation
Ltd. for use in the Delhi MRTS Project Phase-I and specified corridors of
Delhi MRTS Project Phase-II; and (ii) the goods are part of the inventory
maintained by the Delhi Metro Rail Corporation Ltd. and shall be finally
owned by the Delhi Metro Rail Corporation Ltd.
|
41.
|
If,- (a) the goods are imported by the Oil and Natural Gas Corporation
or Oil India Limited (hereinafter referred to as the "licensee") or a sub-contractor
of the licensee and in each case in connection with petroleum operations
to be undertaken under petroleum exploration licenses or mining leases,
as the case may be, issued or renewed after the 1 st of April, 1999 and
granted by the Government of India or any State Government on nomination
basis; (b) where the importer is a licensee, he produces to the Deputy Commissioner
of Customs or the Assistant Commissioner of Customs, as the case may be,
at the time of importation, the following, namely, a certificate from a
duly authorised officer of the Directorate General of Hydro Carbons in the
Ministry of Petroleum and Natural Gas, Government of India, to the effect
that the imported goods are required for petroleum operations referred to
in clause (a) and have been imported under the licences referred to in that
clause, and
(c) where the importer is a sub-contractor, he produces to the Deputy
Commissioner of Customs or the Assistant Commissioner of Customs, as the
case may be, at the time of importation, the following, namely:-
(i) a certificate from a duly authorised officer of the Directorate General
of Hydro Carbons in the Ministry of Petroleum and Natural Gas, Government
of India, to the effect that the imported goods are required for petroleum
operations referred to in clause (a) and have been imported under the licenses
or mining leases, as the case may be, referred to in that clause and containing
the name of such sub-contractor,
(ii)an affidavit to the effect that such sub-contractor is a bona-fide
sub-contractor of the licensee or lessee, as the case may be,
(iii)an undertaking from such licensee or lessee, as the case may be,
binding him to pay any duty, fine or penalty that may become payable, if
any of the conditions of this notification are not complied with by such
sub-contractor or licensee or lessee, as the case may be, and (iv)a certificate,
in the case of a petroleum exploration license or mining lease, as the case
may be, issued or renewed after the 1st of April, 1999, by the Government
of India or any State Government on nomination basis, that no foreign exchange
remittance is made for the import of such goods undertaken by the sub-contractor
on behalf of the licensee or lessee, as the case may be:
Provided that nothing contained in this sub-clause shall apply if such
sub-contractor is an Indian Company or Companies.
|
42.
|
If,- (a) the parts and raw materials are used in the manufacture of goods
in accordance with the provisions of section 65 of the Customs Act, 1962
(52 of 1962); and
(b) a certificate is produced in each case to the Deputy Commissioner
of Customs or the Assistant Commissioner of Customs, as the case may be,
from a duly authorized officer of the Assistant Commissioner of Customs,
as the case may be, from a duly authorized officer of the Directorate General
of Hydrocarbons in the Ministry of Petroleum and Natural Gas, Government
of India, to the effect that the goods are required for the purposes of
off-shore oil exploration or exploitation.
|
43.
|
If,- (a) the goods are imported by an Indian Company or Companies, a
Foreign Company or Companies, or a consortium of an Indian Company or Companies
and a Foreign Company or Companies (hereinafter referred to as the "contractor")
or a sub-contractor of the contractor and in each case in connection with
petroleum operations to be undertaken under a contract with the Government
of India;
(b) where the importer is a contractor, he produces to the Deputy Commissioner
of Customs or the Assistant Commissioner of Customs, as the case may be,
at the time of importation, the following, namely:-
(i) a certificate from a duly authorised officer of the Directorate General
of Hydro Carbons in the Ministry of Petroleum and Natural Gas, Government
of India, to the effect that the imported goods are required for petroleum
operations referred to in clause (a) and have been imported under the contract
referred to in that clause, and
(ii) a certificate, in the case of a contract entered into by the Government
of India and a Foreign Company or Companies or, the Government of India
and a consortium of an Indian Company or Companies and a Foreign Company
or Companies, that no foreign exchange remittance is made for the imports
of such goods undertaken by such Foreign Company or Companies; (c) where
the importer is a sub-contractor, he produces to the Deputy Commissioner
of Customs or the Assistant Commissioner of Customs, as the case may be,
at the time of importation, the following, namely:-
(i) a certificate from a duly authorised officer of the Directorate General
of Hydro Carbons, in the Ministry of Petroleum and Natural Gas, Government
of India, to the effect that the imported goods are required for petroleum
operations referred to in clause (a) and have been imported under the contract
referred to in that clause and containing, the name of such sub-contractor,
(ii) an affidavit to the effect that such sub-contractor is a bona-fide
sub-contractor of the contractor, (iii) an undertaking from such contractor
, binding him to pay any duty, fine or penalty that may become payable,
if any of the conditions of this notification are not complied with, by
such sub-contractor or contractor, as the case may be, and
(iv) a certificate, in the case of a contract entered into by the Government
of India and a Foreign Company or Companies or, the Government of India
and a consortium of an Indian Company or Companies and a Foreign Company
or Companies, that no foreign exchange remittance is made for the import
of such goods undertaken by the sub-contractor on behalf of the Foreign
Company or Companies:
Provided that nothing contained in this sub-clause shall apply if such
sub-contractor is an Indian Company or Companies.
|
44.
|
If,- (a) the goods are imported by an Indian Company or Companies, a
Foreign Company or Companies, or a consortium of an Indian Company or Companies
and a Foreign Company or Companies (hereinafter referred to as the "contractor")
or a sub-contractor of such Company or Companies or such consortium and
in each case in connection with petroleum operations or coal bed methane
operations, as the case may be, to be undertaken under a contract signed
with the Government of India, on or after the 1st day of April,1998, under
the New Exploration Licensing Policy, or on or after the 1st day of April
2001 in terms of the Coal Bed Methane Policy, as the case may be;
(b)where the importer is a contractor, he produces to the Deputy Commissioner
of Customs or the Assistant Commissioner of Customs, as the case may be,
at the time of importation, the following, namely:-
(i) a certificate from a duly authorised officer of the Directorate General
of Hydrocarbons in the Ministry of Petroleum and Natural Gas, Government
of India, to the effect that the imported goods are required for such petroleum
operations or coal bed methane operations, as the case may goods are required
for such petroleum operations or coal bed methane operations, as the case
may be, and have been imported under a contract signed under the New Exploration
Licensing Policy or the Coal Bed Methane Policy, as the case may be; and
(ii) a certificate, in the case of a contract entered into by the Government
of India and a Foreign Company or Companies or, the Government of India
and a consortium of an Indian Company or Companies and a Foreign Company
or Companies, that no foreign exchange remittance is made for the imports
of such goods undertaken by the Foreign Company or Companies; (c) where
the importer is a sub-contractor, he produces to the Deputy Commissioner
of Customs or the Assistant Commissioner of Customs, as the case may be,
at the time of importation, the following, namely:-
(i) a certificate from a duly authorized officer of the Directorate General
of Hydrocarbons, in the Ministry of Petroleum and Natural Gas, Government
of India, to the effect that the imported goods are required for petroleum
operations or coal bed methane operations, as the case may be, referred
to in clause (a) and have been imported under a contract signed under the
New Exploration Licensing Policy or the Coal Bed Methane Policy, as the
case may be ,and containing the name of such sub-contractor,
(ii)an affidavit to the effect that such sub-contractor is a bona-fide
sub-contractor of the contractor, (iii)an undertaking from such contractor
, binding him to pay any duty, fine or penalty that may become payable,
if any of the conditions of this notification are not complied with, by
such sub-contractor or contractor, as the case may be; and
(iv)a certificate, in the case of a contract entered into by the Government
of India and a Foreign Company or Companies or, the Government of India
and a consortium of an Indian Company r Companies and a Foreign Company
or Companies, that no foreign exchange remittance is made for the import
of such goods undertaken by the sub-contractor on behalf of the Foreign
Company or Companies:
Provided that nothing contained in this sub-clause shall apply if such
sub-contractor is an Indian Company or Companies.
|
45.
|
If the importer at the time of importation,-
(a) furnishes in all cases a certificate to the Deputy Commissioner of
Customs or the Assistant Commissioner of Customs, as the case may be, from
an officer not below the rank of a Deputy Secretary to the Government of
India in the Ministry of Non-Conventional Energy Sources recommending the
grant of this exemption and in the case of the goods at (2) to (5), the
said officer certifies that the goods are required for the specified purposes;
and officer certifies that the goods are required for the specified purposes;
and
(b) furnishes an undertaking to the said Deputy Commissioner or Assistant
Commissioner to the effect that,-
(i)in the case of wind operated electricity generators upto 30 KW or
wind operated battery chargers upto 30 KW, he shall not sell or otherwise
dispose off, in any manner, such generators or chargers for a period of
two years from the date of importation;
(ii)in the case of other goods specified at (2) to (5), he shall use
them for the specified purpose; and
(iii)in case he fails to comply with sub-conditions (i) or (ii), or both
conditions, as the case may be, he shall pay an amount equal to the difference
between the duty leviable on the imported goods but for the exemption under
this notification and that already paid at the time of importation.
|
46.
|
If the importer at the time of importation,-
(a) furnishes a certificate to the Deputy Commissioner of Customs or
the Assistant Commissioner of Customs, as the case may be, from an officer
not below the rank of a Deputy Secretary to the Government of India in the
Ministry of New and Renewable Energy recommending the grant of this exemption
and the said officer certifies that the goods are required for the specified
purpose; and
(b) furnishes an undertaking to the said Deputy Commissioner or Assistant
Commissioner to the effect that,-
(i) he shall use the goods for the specified purpose; and
(ii) in case he fails to comply with sub-condition (i), he shall pay
an amount equal to the difference between the duty leviable on the imported
goods but for the exemption under this notification and that already paid
at the time of importation.
|
47.
|
If,- (a) the project for substitution of ozone depleting substances (ODS)
or the project for setting up of new capacity with non-ODS technology has
been approved by the Steering Committee set up in the Ministry of Environment
and Forests for the clearance of such projects; and
(b) the importer furnishes in each case a list of the goods required
for the aforesaid projects, which is duly certified, to the effect that
the goods mentioned in the said list are required for the aforesaid projects,
by an officer not below the rank of a Deputy Secretary in the Ministry of
Environment and Forests.
|
48.
|
(1)If an officer not below the rank of a Deputy Secretary to the Government
of India in the Department of Fertilizers,-
(i) certifies that the scheme for renovation or modernization as the
case may be, of the fertilizer plant has been granted techno-economic clearance
by the said Department; (ii) recommends, in each case, the grant of exemption
under this notification to,-
(a)Machinery, instruments, apparatus and appliances, as well as components
(whether finished or not) or raw materials for the manufacture of aforesaid
items and their components, required for renovation or modernization of
a fertilizer plant; and
(b)spare parts, other raw materials (including semi-finished material)
or consumable stores, essential for maintenance of the fertilizer plant
mentioned above (hereinafter referred to as the said goods) for such scheme;
and
(iii)certifies in each case, that the said goods are, or will be, required
for the purposes specified above;
(2) the value of import of the goods specified in sub-clause (b) of clause
(ii) of sub-condition (1) shall not exceed 10% of the value of imported
goods specified in sub-clause (a) of the said clause;
(3) if the importer furnishes an undertaking to the Joint Commissioner
of customs or the Assistant Commissioner of Customs or Deputy Commissioner
of Customs, as the case may be, to the effect that the said goods shall
be used for the purposes specified above and in the event of his failure
to use the goods for such purposes, he shall pay an amount equal to the
difference between the duty leviable on the said imported goods but for
the exemption under this notification and that already paid at the time
of importation.
|
49.
|
If, at the time of importation, the importer produces a certificate,
from an officer not below the rank of a Deputy Secretary to the Government
of India in the Ministry of Environment and Forests, to the effect that
the imported kits or parts thereof are required for the conversion of motor-spirit
or diesel driven vehicles into Compressed Natural Gas driven vehicles, or
Propane driven vehicles, or Liquefied Petroleum Gas driven vehicles, as
the case may be.
|
50.
|
If,- (i) in the case of a power plant (except a nuclear power plant),-
(a) in the case of Central Power Sector Undertakings, the Chairman of the
concerned Undertaking or an officer authorized by him certifies that the
scheme for renovation or modernization as the case may be, of such power
plant, has been approved and an officer not below the rank of a Deputy Secretary
to the Government of India in the Ministry of Power recommends, in each
case, the grant of the aforesaid exemption to the goods for such scheme;
(b) in other cases, an officer not below the rank of the Chief Engineer
of the concerned State Electricity Board or State Power Utility certifies
that the scheme for renovation or modernization, as the case may be, of
such power plant, has been approved and an officer not below the rank of
a Secretary in the State Government concerned dealing with the subject of
power or electricity recommends, in each case, the grant of the aforesaid
exemption to the goods for such scheme;
(ii) in the case of nuclear power plant, an officer not below the rank
of a Deputy Secretary to the Government of India in the Department of Atomic
Energy certifies the scheme for renovation or modernization as the case
may be, of such power plant, has been approved and recommends the grant
of the aforesaid exemption to the goods for such scheme; and (iii) in all
cases, the importer furnishes an undertaking to the Deputy Commissioner
of Customs or the Assistant Commissioner of Customs, as the case may be,
to the effect that the said goods shall be used for the purpose specified
above and in the event of his failure to use the goods for the renovation
or modernization of the said power generation plant, he shall pay an amount
equal to the difference between the duty leviable on the said imported goods
but for the exemption under this notification and that already paid at the
time of importation.
|
51.
|
If,- (a)in the case of small hydel power generation plants upto 3 MW
station capacity, an officer not below the rank of a Deputy Secretary to
the Government of India in the Ministry of Non- Conventional Energy Sources
certifies the quantity, description and technical specifications of raw
materials and parts required to be imported for the manufacture and supply
of machinery and equipment to the said hydel power generation plant and
recommends the grant of this exemption to the imported goods;
(b)in the case of nuclear power generation plant, an officer not below
the rank of a Deputy Secretary to the Government of India in the Department
of Atomic Energy certifies the quantity, description and technical specifications
of raw materials and parts required to be imported for the manufacture and
supply of machinery and equipment to the said power generation plant and
recommends the grant of this exemption to the imported goods;
(c)in the case of power generation plants (except those specified above),-
(i) in the case of Central Power Sector Undertakings, the Chairman of
the concerned Undertaking or an officer authorized by him certifies the
quantity, description and technical specifications of raw materials and
parts required to be imported for the manufacture and supply of machinery
and equipment to the said power generation plant and an officer not below
the rank of a Deputy Secretary to the Government of India in the Ministry
of Power recommends, in each case, the grant of the aforesaid exemption
to the goods for such scheme; (ii) in other cases, an officer not below
the rank of the Chief Engineer of the concerned State Electricity Board
or State Power Utility certifies the quantity, description and technical
specifications of raw materials and parts required to be imported for the
manufacture and supply of machinery and equipment to the said power generation
plant and an officer not below the rank of a Secretary in the State Government
concerned dealing with the subject of power or electricity recommends, in
each case, the grant of the aforesaid exemption to the goods for such scheme;
and
(iii) in all cases, the importer furnishes an undertaking to the Deputy
Commissioner of Customs or the Assistant Commissioner of Customs, as the
case may be, to the effect that the imported goods shall be used for the
purpose specified above and in the event of his failure to use the goods
for the purpose specified, he shall pay an amount equal to the difference
between the duty leviable on the said imported goods but for the exemption
under this notification and that already paid at the time of importation.
|
52.
|
If imported by a person licensed by the Department of Telecommunications
of the Government of India for the purpose of providing basic telephone
service, cellular mobile telephone service, value added services via V-SAT
system or Internet Service
|
53.
|
If imported by a person licensed by the Department of Telecommunications
of the Government of India for the purpose of providing radio paging service.
|
54.
|
If imported by a person licensed by the Department of Telecommunications
of the Government of India for the purpose of providing Public Mobile Radio
Trunked Service (PMRTS).
|
55.
|
(i) If the importer produces a certificate from an officer not below
the rank of a Deputy Principal Information Officer in the Press Information
Bureau in the Ministry of Information and Broadcasting to the effect that
the importer is an accredited press cameraman, and that the importer has
not availed, on any occasion in the previous two years, exemption under
this notification or the notification of the Government of India in the
Ministry of Finance (Department of Revenue), No. 16/2000- Customs, dated
the 1st March, 2000 or No. 17/2001-Customs, dated the 1 st March, 2001;
(ii) the exemption under this notification shall be applicable to that
portion of C.I.F. value of the specified cameras, lenses and other goods,
which does not exceed one lakh rupees; and
(iii) if the importer gives an undertaking to the Deputy Commissioner
of Customs or the Assistant Commissioner of Customs, as the case may be,
at the time and place of importation to the effect that the said goods shall
remain in his possession, control and use and shall not be sold or parted
with for a period of two years from the date of importation.
|
56.
|
(i) If the importer produces a certificate from an officer not below
the rank of a Deputy Principal Information Officer in the Press Information
Bureau in the Ministry of Information and Broadcasting to the effect that
the importer is an accredited journalist, and that the importer has not
availed, on any occasion in the previous two years, exemption under this
notification or the notification of the Government of India in the Ministry
of Finance (Department of Revenue), No. 16/2000-Customs, dated the 1st March,
2000 or No. 17/2001-Customs, dated the 1st March, 2001;
(ii) the exemption under this notification shall be applicable to that
portion of C.I.F. value of the specified personal computers, typewriters
and fax machines, which does not exceed one lakh rupees; and
(iii) if the importer gives an undertaking to the Joint Commissioner
of Customs or the Assistant Commissioner of Customs or Deputy Commissioner
of Customs as the case may be, at the time and place of importation to the
effect that the said goods shall remain in is possession, control and use
and shall not be sold or parted with for a period of two years from the
date of importation.
|
57.
|
(i) If,-
(a) the goods are imported for Research and Development purposes;
(b) the imported goods are installed in the said Research and Development
Wing of the importer within six months from the date of importation and
certificate from the jurisdictional Assistant Commissioner of Central Excise
or the Deputy Commissioner of Central Excise, as the case may be, for the
units registered with the Central Excise, and from an independent Chartered
Engineer, for the units not registered with the Central Excise is produced
before the Assistant Commissioner of Customs or the Deputy Commissioner
of Customs, as the case may be, at the Port of importation; and
(c) the goods imported are not transferred or sold for a period of seven
years from the date of installation;
(ii) If, -
(a) the goods are imported for use in the manufacture of commodities;
(b) the total value of goods imported does not exceed 25 per cent. of
the FOB value of exports made during the preceding financial year;
(c) the importer produces a certificate from the Joint Director General
of Foreign Trade in the Ministry of Commerce of the Government of India,
certifying the value of exports made during the financial year mentioned
in clause (b) above, and also the value and quantity of goods already imported
under this notification during the current financial year;
(d) the imported goods are installed in the factory of the importer within
six months from the date of importation and certificate from the jurisdictional
Assistant Commissioner of Central Excise or the Deputy Commissioner of Central
Excise, as the case may be, for the units registered with the Central Excise
and from an independent Chartered Engineer, for the units not registered
with the Central Excise is produced before the Assistant Commissioner of
Customs or the Deputy Commissioner of Customs, as the case may be, at the
Port of importation;
(e) the goods imported are not transferred or sold for a period of 7
years from the date of installation.
|
58.
|
If,- (a) the goods are imported for Research and Development purpose;
(b) the total value of goods imported does not exceed one percent of
the FOB value of exports made during the preceding financial year;
(c) the importer produces a certificate from the Joint Director General
of Foreign Trade in the Ministry of Commerce of the Government of India,
certifying the value of exports made during the financial year mentioned
in clause (b) above, and also the value and quantity of goods already imported
under this notification during the current financial year;
(d) the imported goods are installed in the said Research and Development
wing of the importer within six months from the date of importation and
certificate from the jurisdictional Assistant Commissioner of Central Excise
or Deputy Commissioner of Central Excise, as the case may be, for the units
registered with the Central Excise and from an independent Chartered Engineer,
for the units not registered with the Central Excise is produced before
the Assistant Commissioner of Customs or deputy Commissioner of customs,
as the case may be, at the port of importation;
(e) the goods imported are not transferred or sold for a period of 7
years from the date of installation;
|
59.
|
If,- (A)imported by a State Fisheries Corporation or any Fisheries Co-operative
Federation recognized by the State Government; or
(B) imported by a person other than a State Fisheries Corporation or
any Fisheries Co-operative Federation recognized by the State Government
concerned,-
(i) the importer produces a certificate, from an officer not below the
rank of a Deputy Secretary of the Department concerned with fisheries in
the State Government, to the effect that the spares are being imported with
outboard motors meant for fitment to boats which are exclusively used for
fishing operations and that such spares are for the purpose of maintenance
of the said outboard motors and recommending the grant of the concession;
and
(ii) the importer furnishes an undertaking to the Deputy Commissioner
of Customs or the Assistant Commissioner of Customs, as the case may be,
at the time of importation to the effect that –
(a) the said spares shall be used for the purpose specified above; and
(b) he shall pay on demand in the event of his failure to comply with
(a) above an amount equal to the difference between the duty leviable on
the said spares but for the exemption under this notification and that already
paid at the time of importation.
|
60.
|
If,- (1) the spinnerettes acquired in exchange, are imported, within
one year of the date of exportation of spinnerettes out of India; and
(2) no drawback of duty has been paid on the occasion of their export.
Explanation.- On the imports referred to in condition (1) above,
the duty would be leviable as if the value of the said spinnerettes were
equal to-
(i) the cost of such exchange, that is to say, the aggregate of –
(a)labour charges;
(b)price charged for that quantity of gold, platinum and rhodium, if
any, which is in excess of the respective quantity of gold, platinum or
rhodium contained in the said spinnerettes exported out of India; and
(c)any other charges paid by the importer to the supplier of such spinnerettes
for such exchange of spinnerettes; and
(ii) the insurance and freight charges, both ways.
|
61.
|
If, -
(1) the bushings acquired in exchange, are imported, within one year
of the date of exportation of bushings out of India; and
(2) no drawback of duty has been paid on the occasion of their export.
Explanation.- On the imports referred to in condition (1) above,
the duty would be leviable as if the value of the said bushings were equal
to-
(i) the cost of such exchange, that is to say, the aggregate of-
(a) labour charges;
(b) price charged for that quantity of platinum and rhodium, if any,
which is in excess of the respective quantity of the platinum and rhodium
contained in the said bushings exported out of India; and
(c) any other charges paid by the importer to the supplier of such bushings
for such exchange of bushings; and
(ii) the insurance and freight charges, both ways.
|
62.
|
If the importer produces a certificate from an officer not below the
rank of a Joint Secretary to the Government of India in the Ministry of
Home Affairs that the imported goods are required for call interception
and monitoring, to be used by authorized security agencies.
|
63.
|
If an accredited representative of the foreign film unit or the television
team executes a bond in such form and with such surety as may be acceptable
to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs,
as the case may be, binding himself to pay on demand an amount equal to
the duty leviable on such equipment and cameras if the same are not placed
under customs control for re-export within a period of three months or such
extended period as the said Deputy Commissioner or the Assistant Commissioner
may permit, after clearance for home consumption.
|
64.
|
If, - (a) the duties of customs leviable on the specified equipment,
raw films and tapes had been paid at the time of their first importation
into India;
(b) no drawback of duty was paid on their exportation from India;
(c) the identity of the goods is established to the satisfaction of the
Deputy Commissioner of Customs or the Assistant Commissioner of Customs,
as the case may be, at the time of availing of this concession;
(d) the goods are re-imported into India within six months or such period
not exceeding one year from the date of their export from India, as may
be extended by the said Deputy Commissioner or the Assistant Commissioner
on sufficient cause being shown to his satisfaction; and
(e) the External Publicity Division of the Ministry of External Affairs
certifies that the purpose for which the goods had been exported from India
was in public interest and had been sponsored or approved by the Government
of India.
|
65.
|
If, -
(a)the total C.I.F. value of the wireless apparatus, accessories and
parts, imported under this notification does not exceed seventy-five thousand
rupees;
(b)the total value of the parts imported under this exemption does not
exceed Rs.1,000; (c) the importer, i.e. the Licensed amateur radio operator,
at the time of clearance, produces a certificate from an officer not below
the rank of an Assistant Wireless Adviser to the Government of India in
the Ministry of Communications to the effect that the wireless apparatus,
accessories and parts in respect of which this exemption is claimed are
within the value limit specified above, and also recommending the grant
of this exemption. Explanation.- "Licensed amateur radio operator" means
a person duly authorised under the Indian Wireless Telegraphs (Amateur Service)
Rules, 1978, made under sections 4 and 7 of the Indian Telegraph Act, 1885
(13 of 1885).
|
66.
|
If the importer, at the time of importation furnishes an undertaking
to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs,
as the case may be, to the effect that,-
(a) the imported goods shall be used for the specified purposes and shall
not be sold or otherwise disposed of in any manner for a period of at least
two years from the date of importation; and
(b) in the event of failure to comply with (a) above, he shall be liable
to pay an amount equal to the difference between the duty leviable on the
imported goods but for the exemption under this notification and that already
paid at the time of importation.
|
67.
|
If,-
(1)the goods are imported for being tested in –
(a) Defence Research and Development Organisation (DRDO) laboratories;
(b )Indian Institutes of Technology;
(c) Council for Scientific and Industrial Research (CSIR) laboratories;
(d) Central Power Research Institute, Bangalore; or
(e) Any other test centre approved by any Ministry in the Government
of India for this purpose; and
(2) the Head of the organisation certifies that the goods have been imported
by that organisation only for the purpose of testing and shall not be used
or sold after such testing.
|
68.
|
If, -
(a)the goods are imported by a newspaper establishment registered with
the Registrar of Newspapers for India appointed under section 19A of the
Press and Registration of Books Act, 1867 (25 of 1867); and
(b) the importer at the time of import produces before the Deputy Commissioner
of Customs or the Assistant Commissioner of Customs, as the case may be,
-
(1) a certificate issued by the Registrar of Newspapers for India recommending
the grant of exemption under this notification; and
(2) an undertaking to the effect that the imported goods shall remain
in his possession, control and use and shall not be sold or parted with
for a period of five years from the date of importation and in case the
said goods are sold thereafter, the sale shall be subject to the permission
granted by the Registrar of Newspapers for India.
|
69.
|
If the importer, at the time of import, is registered with the Indian
Renewable Energy Development Agency or any State Nodal Agency notified for
the purpose by the Ministry of New and Renewable Energy, Government of India,
for Central Financial Assistance.
|
70.
|
If the importer, at the time and place of clearance,-
(a) produces a certificate from an officer not below the rank of a Deputy
Secretary to the Government of India in the Ministry of Human Resource Development,
Department of Education, to the effect that the imported recorded magnetic
tapes and floppy diskettes are recorded with educational or scientific material
for use in computers and are required by Institutes or Research Centres
duly approved by the University Grants Commission; (b)gives an undertaking
to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs,
as the case may be, to the effect that such imported goods shall not be-
(i) used for any other purpose and shall not be subsequently recorded
with any other material; and
(ii) sold or parted with, without the prior permission of the Commissioner
of Customs of the port of importation.
|
71.
|
If the parts are required for manufacture or servicing of aero planes,
gliders, helicopters or simulators of aircraft.
Explanation.- "Parts of aero planes, gliders, helicopters or simulators
of aircraft" shall include engines, engine parts, wireless transmission
apparatus, wireless receivers, iron and steel washers and screws, ball and
roller bearings and other parts.
|
72.
|
If an officer not below the rank of a Deputy Secretary to the Government
of India in the Ministry of Civil Aviation certifies in each case the description
and quantity of such raw materials which are required for the manufacture
or servicing of the specified aircraft or parts of such aircraft, as the
case may be.
|
73.
|
If a.
(i) imported for servicing ,repair or maintenance of aircraft imported
by Aero Club of India; or
(ii) imported for servicing ,repair or maintenance of aircraft, which
are used for flying training purposes or for operating non-scheduled (passenger)
service or non-schedule (charter) services;
(iii) imported for servicing ,repair or maintenance of aircraft, imported
or procured by the Airports Authority of India for flight calibration purposes;
(iv) imported for servicing ,repair or maintenance of aircraft, which
are used for operating scheduled air transport service or the schedule air
cargo services;
(v) imported for servicing ,repair or maintenance of aircraft, which
is not registered or not intended to be registered in India, and brought
into India for the purpose of a flight to or across India, and which is
intended to be removed from India within 15 days or as extended by the competent
Authority in the Ministry of Civil Aviation not exceeding 60 days from the
date of entry
b. the importer maintains a proper account of import, use and consumption
of the specified goods imported for the purposes of servicing, repair and
maintenance of aircrafts and submits such account periodically to the commissioner
of Customs in such form and in such manner as may be specified by the said
commissioner;
c. the importer, by the execution of bond, in such form and for such
sum as may be specified by the said commissioner, binds himself to pay on
demand an amount equal to the duty leviable,-
(i) on parts, raw material, as are not proved to the satisfaction of
the said Commissioner to have been used or consumed for the aforesaid purpose,
(ii) on the testing equipment ,as are not proved to the satisfaction
of the said Commissioner to have been installed or otherwise used for the
aforesaid purposes,
within a period of three months from the date of importation thereof
or within such extended period as that Commissioner, on being satisfied
that there is sufficient cause for not installing, using or consuming as
the case may be, for the aforesaid purposes within the said period, allow.
Explanation.- The expression "Aero Club of India, "operator"
,"non-scheduled (passenger) services, "non-scheduled(charter services)",
"scheduled air transport service" ," schedule air cargo services" shall
have the meanings as assigned to them in condition No. 75/76/77.
|
74.
|
If the importer, at the time of import,-
(i) produces before the Deputy Commissioner of Customs or the Assistant
Commissioner of Customs, as the case may be, a certificate from an officer
not below the rank of a Deputy Secretary to the Government of India in the
Department of Space certifying that the said satellite and pay-loads are
for launch into outer space in conformity with the provisions of the Outer
Space Treaty of 1967;
(ii) produces before the Deputy Commissioner of Customs or the Assistant
Commissioner of Customs, as the case may be, a certificate from an officer
not below the rank of a Deputy Secretary to the Government of India in the
Department of Space certifying that the goods covered under item (ii) of
column (3) of S.No.449 of the Table, are required for launch vehicles and
satellites and payloads; and
(iii) gives an undertaking to the effect that the ground equipment, covered
under item (iii) of column (3) of S.No.449 of the Table, imported for testing
the satellites or pay-loads shall be re-exported within a period of six
months from the date of their importation or such extended period as the
Deputy Commissioner of Customs or the Assistant Commissioner of Customs,
as the case may be, may allow, and in the event of failure to comply with
the same, he shall pay on demand an amount equal to the difference between
the duty leviable on such goods but for the exemption under this notification
and that already paid at the time of importation.
|
75.
|
If, -
(i) imported by an operator or on behalf of the operator, for operating
scheduled air transport service or scheduled air cargo service, and such
aircraft is used for operating the scheduled air transport service or the
scheduled air cargo service, as the case may be; or (ii) the said aircraft
is not registered or not intended to be registered in India, and brought
into India for the purpose of a flight to or across India, and which is
intended to be removed from India within fifteen days, or as extended by
the competent authority in Ministry of Civil aviation, not exceeding sixty
days, from the date of entry.
Explanation.- For the purposes of this entry,
(a) "operator" means a person, organisation or enterprise engaged in
or offering to engage in aircraft operation;
(b) "scheduled air transport service" means an air transport service
undertaken between the same two or more places and operated according to
a published time table or with flights so regular or frequent that they
constitute a recognizably systematic series, each flight being open to use
by members of the public; and
(c) "scheduled air cargo service" means air transportation of cargo or
mail on a scheduled basis according to a published time table or with flights
so regular or frequent that they constitute a recognizably systematic series,
not open to use by passengers.
|
76.
|
If,- (a) the aircraft is imported by:-
(i) the Aero Club of India, New Delhi, recognized as a National Sports
Federation by Ministry of Youth Affairs and Sports, Government of India;
or
(ii) a Flying Training Institute approved by the competent authority
in the Ministry of Civil Aviation; and
(b) the importer has been granted approval by the competent authority
in the Ministry of Civil Aviation to import aircraft for use in imparting
training; and
(c) the importer furnishes an undertaking to the Deputy Commissioner
of Customs or Assistant Commissioner of Customs, as the case may be, at
the time of importation that:- a. the said aircraft shall be used for the
specified purpose only and he shall pay on demand, in the event of his failure
to use the imported aircraft for the specified purpose, an amount equal
to the duty payable on the said aircraft but for the exemption under this
notification; b. the aircraft imported under this concession shall not be
sold/transferred to an entity other than a flying training institute approved
by the Directorate General of Civil Aviation. (d) the aircraft is imported
by the Airports Authority of India for flight calibration purposes and at
the time of importation, the Airports Authority of India furnishes an undertaking
to the Deputy Commissioner of Customs or Assistant Commissioner of Customs,
as the case may be, that :-
a. the said aircraft shall be used for flight calibration purposes only
and in the event of their failure to use the imported aircraft for the specified
purpose, they shall pay, on demand, an amount equal to the duty payable
on the said aircraft but for the exemption under this notification; and
b. the said aircraft shall not be sold or transferred to any other entity
|
77.
|
(i) the aircraft are imported by an operator who has been granted approval
by the competent authority in the Ministry of Civil Aviation to import aircraft
for providing non-scheduled (passenger) services or non-scheduled (charter)
services; and
(ii) the importer furnishes an undertaking to the Deputy Commissioner
of Customs or Assistant Commissioner of Customs, as the case may be, at
the time of importation that:-
a. the said aircraft shall be used only for providing non- scheduled
(passenger) services or non-scheduled (charter) services, as the case may
be; and
b. he shall pay on demand, in the event of his failure to use the imported
aircraft for the specified purpose, an amount equal to the duty payable
on the said aircraft but for the exemption under this notification.
Explanation.-
1. for the purposes of this entry,-
(a) „operator‟ means a person, organization, or enterprise engaged in
or offering to engage in aircraft operation;
(b) „non-scheduled (passenger) services‟ means air transport services
other than Scheduled (passenger) air transport services as defined in rule
3 of the Aircraft Rules 1937. (c) „non-scheduled (charter) services‟ mean
services provided by a „non-scheduled (charter) air transport operator‟,
for charter or hire of an aircraft to any person, with published tariff,
and who is registered with and approved by Directorate General of Civil
Aviation for such purposes, and who conforms to the civil aviation requirement
under the provision of rule 133A of the Aircraft Rules 1937:
2. For the purpose of this exemption, use of such imported aircraft by
a non-scheduled (passenger) operator for non-scheduled (charter) services
or by a non-scheduled (charter) operator for non-scheduled (passenger) services,
shall not be construed to be a violation of the conditions of import at
concessional rate of duty.
|
78
|
If,- (a) the importer makes a declaration at the time of import that
the barges would be re-exported; (b) the barges are re-exported, by the
same ship which brought them or by any other ship under the same shipping
agency, within two months of the date of importation or such extended period
as the Deputy Commissioner of Customs or the Assistant Commissioner of Customs,
as the case may be, may allow; and
(c) the importer executes a bond, in such form and for such sum as may
be specified by the Deputy Commissioner of Customs or the Assistant Commissioner
of Customs, as the case may be, binding himself to pay that sum if the re-export
does not take place within the period specified under condition (b) above.
|
79.
|
If,- (a) the importer maintains a proper account of import, use and consumption
of the specified goods imported for the purpose of repairs of ocean-going
vessels and submits such account periodically to the Commissioner of Customs
in such form and in such manner as may be specified by the said Commissioner;
(b)the importer, by the execution of bond, in such form and for such
sum as may be specified by the said Commissioner, binds himself to pay on
demand an amount equal to the duty leviable,-
(i) on the capital goods or spares thereof or material handling equipment,
as are not proved to the satisfaction of the said Commissioner to have been
installed or otherwise used for the aforesaid purpose;
(ii) on parts, raw material and consumables, as are not proved to the
satisfaction of the said Commissioner to have been used or consumed for
the aforesaid purpose, within a period of three months from the date of
importation thereof or within such extended period as that Commissioner,
on being satisfied that there is sufficient cause for not installing, using
orconsuming them, as the case may be, for the aforesaid purpose within the
said period, allow. Explanation. – "Ocean going vessels" includes-
(a) liners; cargo-vessel of various kinds including refrigerator vessels
for the transport of meat, fruit or the like, vessels specified for the
transport of particular goods (grain, coal, ores or the like) ; tankers
(petrol, wine or the like); yachts and other sailing vessels; cable ships;
ice-breakers; floating factories of all kinds (for processing whales, preserving
fish or the like) whale catchers; trawlers and other fishing vessels; life
boats, scientific research vessels; weather ships; vessels for the transportation
or mooring of buoys; pilot-boats; hopper barges for the disposal of dredged
material or the like;
(b) war ships of all kinds including submarines;
(c)tugs, dredgers, fire- floats and salvage ships; and
(d)oil rigs, drilling ships and jack-up ris.
|
80.
|
If,-
(a) the importer maintains a proper account of import , use and consumption
of the specified goods imported for the purpose of repairs of ocean going
vessels and submits such account periodically to the commissioner of customs
in such form and in such manner as may be specified by the said commissioner;
(b) the importer, by the execution of bond, in such form and for such
sum as may be specified by the Commissioner of Customs , binds himself to
pay on demand an amount equal to the duty leviable,- on the spares and consumables,
as are not proved to the satisfaction of the said commissioner to have been
used or otherwise consumed for the aforesaid purpose, within a period of
three months from the date of importation thereof or within such extended
period as that commissioner, on being satisfied that there is sufficient
cause for not using or consuming them, as the case may be, for the aforesaid
purpose within the said period, allow.
Explanation.-"Ocean going vessels" includes-
(i) Liners; cargo vessels of various kinds including refrigerator vessels
for the transport of meat, fruit or the like, vessels specified for the
transport of particular goods (grain, coal, ores or the likes);
tankers(petrol, wine or the like );yachts and other sailing vessels ;
cable ships; ice-breakers ; floating factories of all kind( for processing
whales, preserving fish or the like) whale catchers; trawlers and other
fishing vessels; life boats ,scientific research vessels; weather ships;
vessels for the transportation or mooring of buoys ; pilot boats ;hopper
barges for the disposal of dredged
material or the like;
(ii) War ships of all kinds including submarines;
(iii) Tugs, dredgers, fire-floats and salvage ships ; and
(iv) Oil rigs , drilling ships and jack-up rigs."
|
81.
|
If the vessels and other floating structures are intended to be broken
up after their importation, the importer shall present a fresh bill of entry
to the Commissioner of Customs, and thereupon such goods shall be chargeable
with the duty which would be payable on such goods as if they were entered
for home consumption, under section 46 of the Customs Act, 1962 (52 of 1962),
on the date of the presentation of such fresh bill of entry, for the purposes
of break-up of such goods.
|
82.
|
If,-
the importer files a bill of entry under section 46 of the Customs Act,
1962 [No. 52 of 1962] at the time of conversion of vessel for coastal run
subsequent to import and pays the applicable duty of customs on:-
(a) full lease or contract value, if the import is under a lease agreement
or contract;
(b) 1/120th of the applicable duty, for each month or part thereof, of
stay in India as coastal vessel.
Explanation.- For the purposes of this entry,
(1)"Foreign going vessel" shall have the same meaning as assigned to
it under clause (21) of Section 2 of the Customs Act1962 [No. 52 of 1962];
(2) "Conversion to coastal Vessel" shall include the vessel granted
a license for coastal trade under Section 407 of the Merchant Shipping Act,
1958 (44) of 1958) by the Director General Shipping and the vessel granted
permission for carrying coastal goods, under the provisions specified in
Chapter XII, of the Customs Act, 1962, [No. 52 of 1962] by the proper officer
of the customs;
(3) "applicable duty" means the Additional duty of Customs under
sub-section (1) of section 3 of the Customs tariff Act,1975 (51 of 1975).
|
83.
|
If any of the goods manufactured from the imported raw materials and
parts are subsequently intended to be broken up, a fresh bill of entry in
respect of such manufactured goods shall be presented to the Commissioner
of Customs and thereupon these goods shall be chargeable with the duty which
would be payable as if such manufactured goods had been imported and entered
for home consumption, under section 46 of the Customs Act, 1962 (52 of 1962),
on the date of the presentation of such fresh bill of entry, for the purposes
of break-up of such manufactured goods.
|
84.
|
If,- (a) imported by any Department or Ministry of the Government of
India; and
(b) the importer produces a certificate from an officer not below the
rank of a Joint Secretary to the Government of India in the concerned Department
or Ministry, certifying that the said goods are being imported under an
agreement relating to Government to Government Assistance Programme with
any other country.
|
85.
|
If, at the time of importation, the importer produces a certificate,
from an officer not below the rank of a Deputy Secretary to the Government
of India in the Department of Science and Technology or an officer not below
the rank of a Joint Secretary to the concerned State Government in the Department
of Science and Technology to the effect that imported equipment, parts or
accessories are required for initial setting up, repair or maintenance of
a planetarium.
|
86.
|
If,- (a) the hospital is run by –
(1) the Central Government, a State Government, a Union Territory Administration
or a Local Authority; or (2) institutions established by or under any law
for the time being in force; or (3) societies registered under any law for
the time being in force relating to registration of societies, such societies
being controlled by any of the authorities mentioned in (1) above;
(b) the importer produces a certificate, from the Directorate General
of Health Services of the Government of India or the Ministry of Health
and Family Welfare in the Government of India, or from the State Government,
the Union Terrritory Administration or the Local Authority running or controlling
that hospital, as the case may be, to the effect that the said hospital
falls in any of the categories specified at (a) above; and
(c) the head of the hospital certifies in each case that the hospital
equipment is meant for use in the hospital and is essential for running
or maintenance of the hospital. Explanation.- "Hospital" includes
any Institution, Centre, Trust, Society, Association, Laboratory, Clinic
and Maternity Home, which renders medical, surgical or diagnostic treatment.
|
87.
|
If the importer at the time of importation, -
(a) produces a certificate from the Director General or Deputy Director
General or Assistant Director General, Health Services, New Delhi, in each
case, in the Form below; or (b) furnishes an undertaking acceptable to the
Deputy Commissioner of Customs or the Assistant Commissioner of Customs,
as the case may be, to the effect that the aforesaid certificate shall be
produced before the said Deputy Commissioner or the Assistant Commissioner
within the period specified by the said Deputy Commissioner or the Assistant
Commissioner, failing which he would pay the duty leviable thereon.
FORM
Certficate No....………. of …...…….. (year)
Certified that the medical equipment / accessory / spare part ........................
(name to be specified) being imported by ................…………… is a life
saving medical equipment, accessory or spare part and exemption from payment
of customs duty is recommended.
Signature with date of Director General /Deputy Director General / Assistant
Director General,Health Services, New Delhi
|
88.
|
If, at the time of importation, the importer produces to the Deputy commissioner
of Customs or the Assistant Commissioner of Customs, as the case may be,
a certificate from an officer not below the rank of Joint Secretary to the
Government of India in the Ministry of Mines to the effect that the said
goods are required for the specified purpose.
|
89.
|
If,- (a) where the importer is the Government of India or a person authorised
by that Government, or the goods are shipped on the order of a Department
of that Government and are appropriated under such order at the time of
shipment, for use in anti-smuggling operations, he produces, at the time
of importation, a certificate from the Under Secretary to the Government
of India in the Department of Revenue to the effect that the said goods
are intended for the aforesaid use;
(b) where the importer is a Police Force of a State or a Union Territory
or the Central Reserve Police Force, the National Security Guard or the
Special Protection Group and the said goods are imported for bomb detection
or disposal purposes, he produces, at the time of importation, a certificate
from an officer in the Ministry of Home Affairs not below the rank of an
Under Secretary to the Government of India to the effect that the said goods
are intended for the aforesaid use.
|
90.
|
If,- (a) the synthetic tracks and artificial surfaces and equipment required
for their installation are imported under the "Scheme for Laying Synthetic
Tracks and Artificial Surfaces" of the Department of Youth Affairs and Sports,
Government of India;
(b) the importer, at the time of import –
(1) produces before the Deputy Commissioner of Customs or the Assistant
Commissioner of Customs, as the case may be, a certificate from an officer
not below the rank of a Deputy Secretary to the Government of India in the
said Department certifying that the import of the said tracks and surfaces
is under the "Scheme for Laying Synthetic Tracks and Artificial Surfaces"
and also recommending the grant of the exemption; and
(2) gives an undertaking to the effect that the equipment imported for
installation of the said tracks and surfaces shall be re-exported within
a period of six months from the date of importation, and in the event of
failure to comply with the same he shall pay on demand an amount equal to
the difference between the duty leviable on such goods but for the exemption
under this notification and that already paid at the time of importation.
|
91.
|
If,- (a) the goods are imported into India by a National Sports Federation,
under a certificate issued by the Sports Authority of India or imported
by the Sports Authority of India, for use in a national or international
championship or competition, to be held in India or abroad; and (b) the
importer, at the time of clearance of the goods, produces a certificate
to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs,
as the case may be, from an officer not below the rank of a Director in
the Sports Authority of India certifying - (i) the name and address of the
importer of the goods and the description, quantity and value of the goods,
and
(ii) that the goods are required for the purpose specified at (a) above.
|
92.
|
If certified by the apex body in relation to the concerned game or sport
(i.e the highest organisation, other than Government, by which the game
or sport is controlled or regulated), or the Sports Authority of the concerned
State, that the requisites for games and sports are required to be used
in a national or international championship or competition to be held in
India or abroad.
|
93.
|
If an officer not below the rank of a Joint Secretary to the Government
of India in the Ministry of Power certifies that:-
(i) the power purchasing State has constituted the Regulatory Commission
with full powers to fix tariffs;
(ii) the power purchasing states shall undertake to carry out distribution
reforms as laid down by Ministry of Power.
(a) in case of imports for a project for which certificate regarding
Mega Power Project status issued by an officer not below the rank of Joint
Secretary to the Government of India in the Ministry of Power is provisional,
the importer furnishes a security in the form of a Fixed deposit Receipt
from any Scheduled Bank for a term of thirty six months or more in the name
of the President of India for an amount equal to the duty of customs payable
on such imports but for this exemption, to the Deputy Commissioner of Customs
or Assistant Commissioner of Customs, as the case may be, at the time of
importation and if the importer fails to furnish the final mega power status
certificate within a period of thirty six months from the date of importation,
the said security shall be appropriated towards duty of customs payable
on such imports but for this exemption.
(b) In the case of imports by a Central Public Sector Undertaking, the
quantity, total value, description and specifications of the imported goods
are certified by the Chairman and Managing Director of the said Central
Public Sector Undertaking; and
(c) In the case of imports by a Private Sector Project, the quantity,
total value, description and specifications of the imported goods are certified
by the Chief Executive Officer of such project.
|
94.
|
(a) In the case of imports by the constituent units of the Department
of Atomic Energy, the quantity, total value, description and specifications
of the imported goods are certified by an officer not below the rank of
a Joint Secretary to the Government of India in the Department of Atomic
Energy;
(b) In the case of imports by a Central Public Sector Undertaking, the
quantity, total value, description and specifications of the imported goods
are certified by the Chairman and Managing Director of the said Central
Public Sector Undertaking;
|
95.
|
The LNG facility is certified by an officer not below the rank of a Joint
Secretary to the Government of India in the Ministry of Power as being an
integral part of the said power project of M/s Ratnagiri Gas and Power Private
Limited at Dabhol.
|
96.
|
If the importer, at the time of import, produces to the Deputy Commissioner
of Customs or the Assistant Commissioner of Customs, as the case may be,
a certificate from an officer not below the rank of Deputy Secretary to
the Government of India in the Ministry of Heavy Industries and Public Enterprises
(Department of Heavy Industry), certifying that the imported goods (having
regard to their description, quantity and technical specifications) are
intended for use in the National Automotive Testing and Research and Development
Infrastructure Project (NATRIP).
|
97.
|
If a certificate from the Indian Mission concerned, about the ownership
of the goods by the deceased person, is produced at the time of clearance
of the goods through Customs station.
|
98.
|
If the imported goods are meant to be exhibited in a museum managed by
–
(a) the Archaeological Survey of India, such goods shall be imported
under cover of a certificate issued by the Director General of Archaeology
in India; or
(b) a State Government, such goods shall be imported under cover of a
certificate issued by the concerned Authority in the concerned State Government.
|
99.
|
If,- (a) the goods are imported by a manufacturer, for use in the manufacture
of sports goods for export by that manufacturer and the manufacturer is
registered with the „Sports Goods Export Promotion Council‟;
(b) the total value of specified goods imported in a year shall not exceed
3 per cent. of the FOB value of sports goods exported by the manufacturer
during the preceding financial year; (c) the importer produces a certificate
from the „Sports Goods Export Promotion Council‟ certifying the value and
quantity of exports made during the preceding financial year mentioned in
sub-condition (b); and also the value and quantity of goods already imported
under this notification during the current financial year.
|
List 1 (See Sr.No.93 of the Table)
- Breadcrumbs
- Batter
- Flavouring Oil
- Food Colours
- Monosodium Glutamate
- Flavouring extracts, and sauces
- Pre-formed HIPS Containers
- Polyurethane and Polystyrene containers meeting buyers‟ requirements
- Printed Plastic Pouches for Packing buyers brand
- Food grade Phosphates
- Food tenderizers
- Food enzymes
- Food marinates
- Starch (Wheat/non-wheat)/Pre-gelatinized Starch
- Sucrose
- Sodium Chloride
- Seasoning Salts/acids such as sodium carbonate, potassium hydrogen tartrate
- Oleoresins/spice extract
- Natural Edible gum
- Anti-oxidants, BHT/EDTA/Sod, or Pot.Metabisulphite
- Soya protein
- Citric Acid
- Sorbitol
- Seasoning Oil
- Gel Ice (for air freighting chilled fish)
- Fats/Hydrogenated oils
- Milk Protein
- Reducing Sugars, such as lactose
- Lecithin (emulsifier)
- Glucose
- Pre-formed Crystallised Polyethylene Terephthalate (CPET) containers
- Ascorbic Acid
- Sodium Citrate
- Acid Sodium Carbonate (Sodium bicarbonate)
- Sodium Sulfite
- Active Oxygen
List 2 (See S. No. 98 of the Table)
- Amprolium hydrochloride
- Ascorbyl dipotassium 2 sulphate dihydrate
- Ascorbyl polyphosphate
- Avilamycin
- Avoparcin
- Bovine albumin fraction
- Bovine somatotropin
- Buparvaquone
- Calf serum/foetal calf serum
- Dulbecco phosphate buffer saline medium
- Flavophospholipol
- Follicular stimulating hormone (FSH)
- Gonadotropin releasing hormone (GnRH)
- Halofuginone bromide
- Human chorionic gonadotropin hormone (HCG)
- Ivermectin
- Lasolacid sodium
- Leutinising hormone
- Lincomycin powder
- Lincospectin (bulk drug lincomycin spectinomycin 1:2)
- Maduramicin ammonium/haduramycin ammonium
- Monensin granulated (coban premix)
- Ovaprim [gonadotropin releasing hormones] (GnRH) analogue with domperidone
- Pleuromutilin
- Pregnant mare serum (PMSG)
- Prostaglandin F2 alpha
- Prostaglandin
- Prostaglandins (PgF2 alpha)
- Robenidin HCl
- Salinomycin 12%
- Tiamulin hydrogen fumarate
- Tiamulin hydrochloride
- Tylan premix
- Tylosin tartarate/ tylosin phosphate
- Vaccine for fish
- Virginiamycin
- 4-hexyl resorcinol
List 3 (See S. No 147 of Table)
- Allopurinol
- Amikacin
- Amiodarone
- Amphotericin-B
- Amrinone
- Amifostine
- Aprotinin
- Atracurium besylate
- Baclofen
- Bleomycin
- Busulphan
- BCG vaccine , Iopromide,Iotrolan
- Carbidopa with Levodopa
- Cefoperazone
- Ceftizoxime
- Chlorambucil
- Chorionic Gonadotrophin
- Clindamycin
- Cyclophosphamide
- Cefpirome
- Dactinomycin
- Dacarbazine
- Daunorubicin
- Desmopressin
- Desferrioxamine
- Dimercaprol
- Dobutamine
- Disopyramide phosphate
- Dopamine
- Disodium Pamidronate
- Eptifibatide
- Gemcitabine
- Glucagon
- Hydroxyurea
- Ifosfamide
- Isoprenaline
- Interferon alpha - 2b/interferon alpha- 2a/Interferon NL/ Interferon alpha
NL(LNS)
- Isoflurane
- Ketamine
- Lactulose
- Levodopa (L-Dopa)
- Lomustine
- Lamivudine
- Letrozole
- Leuprolide Acetate
- Latanoprost
- Melphalan
- Mercaptopurine
- Mesna
- Methotrexate
- Methyl prednisolone
- Mitomycin
- MMR (Measles, mumps and rubella) vaccine
- Mustin Hydrochloride
- Netilmicin
- Naloxone
- Nitroglycerine
- Micronised Progesterone or Injection Progesterone
- Octreotide
- Pancuronium Bromide
- Pilocarpine
- Podophyllotoxin
- Piperacillin
- Praziquantel
- Pralidoxime
- Prazosin
- Protamine
- Quinidine
- Sodium Cromoglycate spincaps and cartridges
- Sodium Hyalauronate sterile 1% and 1.4% solution
- Somatostatin
- Somatropin
- Streptokinase and Streptodomase preparations
- Strontium Chloride (85 Sr.)
- Thioguanine
- Tobramycin
- Tissue Plasminogen Activator
- Tetanus Immunoglobin
- Typhoid Vaccines : (i) VI Antigen of Salmonella Typhi, and (ii) (ii) Ty
2la cells and attenuated non-pathogenic strains of S. Typhi
- Tretinoin
- Tribavirin/Ribavirin
- Urokinase
- Ursodeoxycholic Acid
- Vancomycin
- Vasopressin
- Vecuronium Bromide
- Zidovudine
- 5-Fluorouracil
- Pegulated Liposomal Doxorubicin Hydrochloride injection
- Ketoanalogue preparation of essential amino acids
- Recombinant human Erythropoietin
- Pergolide
- Kit for bedside assay of Troponin-T
- Solution for storing, transporting, flushing donor organs for transplant
- Lopinavir plus Ritonavir (co-formulation of Lopinavir and Ritonavir)
- Miltefosine
- Milrinone Lactate
- Methoxy Isobutile Isonitrile (MIBI)
- Haemophilus Influenzae Type b Vaccine
- Mycophenolate Sodium
- Verteporfin
- Capecitabine
- Daclizumab
- Ganciclovir
- Infliximab
- Drotrecogin alfa (activated)
- Eptacog alfa activated recombinant coagulation factor VIIa
- Muromonab CD3
- Japanese encephalitis vaccine
- Interluekin-2
- Valganciclovir
- Low molecular weight heparin
- Didanosine;
- Efavirenz;
- Indinavir;
- Nelfinavir;
- Nevirapine;
- Stavudine;
- Abacavir Sulphate;
- Lopinavir;
- Tenofovir Disoproxil;
- Emtricitabine;
- Azathioprine ;
- Antinomycin D;
- Cisplatin;
- Cytosine Arabinoside (Cytarabine);
- Danazol;
- Doxorubicin;
- Etoposide;
- Flutamide;
- Ondansetron;;
- Paclitaxel;
- Tamoxifen Citrate;
- Vinblastine Sulphate;
- Vincristine;
- Eurocollins Solution;
- Everolimus tablets/dispersible tablets;
- Poractant alfa;
- Exemestane;
- Recombinant Human Interferon beta 1-a;
- Troponin-I whole blood test kit;
- Blower/mister kit for beating heart surgery;
- Fluoro Enzyme Immunoassay Diagnostic kits.
- Tablet Telbivudine
- Injection Exenatide
- DTaP-IPV-Hib or PRP-T combined Vaccine
- Pneumococcal-7 Valent Conjugate Vaccine (Diphtheria CRM197 Protein)
- Injection Thyrotropin Alfa
- Injection Omalizumab.
- Abatacept
- Daptomycin
- Entacevir
- Fondaparinux Sodium
- Influenza Vaccine
- Ixabepilone
- Lapatinib
- Pegaptanib Sodium injection
- Suntinib Malate
- Tocilizumab
- Agalsidase Beta
- Anidulafungin
- Capsofungin acetate
- Desflurane USP
- Heamostatic Matrix with Gelatin and human Thrombin
- Imiglucerase
- Maraviroc
- Radiographic contrast media (Sodium and Meglumine ioxitalamate, Iobitridol
and Sodium and meglumine ioxaglate)
- Sorafenib tosylate
- Varenciline tartrate
- 90Yttrium
- Rasburicase
- Nilotinib
- Pneumococcal acchride Conjugate vaccine adsorbed 13-valent suspension for
injection
- Micafungin sodium for injection
- Bevacizumab
- Raltegravir potassium
- Rotavirus Vaccine (Live Oral Pentavalent)
- Pneumococcal Polysaccharide Vaccine
- Posaconazole Oral suspension
- Temsirolimus Concentrate for infusion for injection
- Natalizumab
List 4 (See S. No. 148 and 516 of the Table)
- Abciximab
- Aurothiomalate Sodium
- Asparaginase
- Agglutinating Sera
- Anti-Diphtheria Normal Human Immunoglobulin
- Anti-Haeomophilic Factor concentrate(VIII and IX)
- Anti-human lymophocyte immunoglobulin IV
- Anti-human thymocyte immunoglobulin IV
- Anti-Pertussis Normal Human Immunoglobulin
- Anti-Plague serum
- Anti-Pseudomonas Normal Human Immunoglobulin
- Anti-Rabies Normal Human Immunoglobulin
- Anti -D Immunoglobulin
- Basiliximab
- Beractant Intra-tracheal Suspension
- Blood group sera
- Botulinum Toxin Type „A‟
- Burn therapy dressing soaked in gel
- Bovine Thrombin for in vitro test for diagnosis in Haemorrhagic disorders
- Bovine Albumin
- Bretyleum Tossylate
- Calcium Disodium Edetate
- Carmustine
- Cesium Tubes
- Calcium folinate
- Cholestyramine
- Christmas Factor Concentrate (Coagulation factor IX prothrombin complex
concentrate)
- Cobalt-60
- Corticotrophin
- Cyanamide
- Diagnostic Agent for Detection of Hepatitis B Antigen
- Diagnostic kits for detection of HIV antibodies
- Diphtheria Antitoxin sera
- Diazoxide
- Edrophonium
- Enzyme linked Immunoabsorbent Assay kits [ELISA KITS]
- Epirubicin
- Fibrinogen
- Floxuridine
- Follicle Stimulating Hormone [FSH]
- Flucytosin
- Filgrastim /Molgramostim (G- CSF/GM-CSF)
- Flecainide
- Fludarabine Phosphate
- Foetal Bovine Serum (FBS)
- Gadolinium DTPA Dimeglumine
- Gallium Citrate
- Gasgangrene Anti-Toxin Serum
- Goserlin Acetate
- Hepatitis B Immunoglobulin
- Hexamethylmelamine
- Hydralazine
- Idarubicine
- Idoxuridine
- Imatinib Mesilate
- Irinotecan
- Immunoassay kit for blood Fibrinogen degradation product for direct estimation
for diagnostic test in D.I.C.
- Inactivated rabies vaccine [Human diploid cell]
- Inactivated rabies vaccine [Vero-cell]
- Intravenous amino acids
- Intravenous Fat Emulsion
- Iopamidol
- Iohexol
- (a) Indium (III) in bleomycin (b) Indium 113 Sterile generator and elution
accessories (c) Indium 113 in brain scanning kit (d) Indium 113 in liver scanning
kit
- Iscador, CLIA diagnostic kits
- Levodopa with benserazine
- Lenograstim
- Meningococcoal A and C combined vaccine with diluant solvent
- Methicillin
- Metrizamide Inj with diluant
- Monocomponent insulins
- Mycophenolate Mofetil
- Nalorphine
- Normal Human plasma
- Normal Human immunoglobulin
- Nuclear magnetic resonance contrast agent
- Normal Human serum Albumin
- Penicillamine
- Pentamidine
- Penicillinase
- Poliomyelitis vaccine (inactivated and live)
- Potassium Aminobenzoate
- Porcine Insulin Zinc Suspension
- Prednimustine
- Porcine and Bovine insulin
- Procarbazine
- Purified Chick Embryo Cell Rabies Vaccine
- Pyridostigmine
- Pneumocystis carinii IF kits
- Prostaglandin E 1 (PGE1)
- Radio-immunoassay kit for hormones (T3, T4, TSH Insulin, Glucogen, Growth
Hormone, Cortisol, L.H., FSH and Digoxin)
- Radioisotope TI 201
- (a) Rabbit brains thromboplastin for PT test (b) Reagent for PT tests (c)
Human Thrombin for TT tests
- Rabies immunoglobulin of equine origin
- Ritonavir
- Rivastigmine
- Rituximab
- Sevoflurane
- Saquinavir
- Recuronium Bromide
- Septopal beads and chains
- Sodium Arsenate
- Freeze Dried Form of Human Follicle Stimulating and Luteinising Hormones
- Solution of Nucleotides and Nucliosides
- Specific Desensitizing Vaccine
- Sterile Absorbable Haemostat for control of surgical vessel bleeding
- Strontium SR-89 Chloride
- Suxamethonium Chloride
- Selenium-75
- Teicoplanin
- Technitium-99M
- Tetrofosmin
- Ticarcillin
- Tranexamic Acid
- Tocainide
- Tri-iodothyronine
- Triethylene Tetramine
- Trastuzumab
- Thrombokinase
- Teniposide
- Trans-1- diamino cyclohexane Oxalatoplatinum
- Ticarcillin Disodium and Potassium Clavulanate combination
- Vindesin Sulphate
- X-ray diagnostic agents, the following :- (i) Propylidone (ii) Ethyl iodophenylun
decylate (iii) Iodipammide methyl glucamine (iv) Lipidoll utra fluid
(v) Patent blue
- Zalcitabine
- Zoledronic Acid
List 5 (See S.No.149 of the Table)
- Chlorine
- Helium
- Silicon tetra chloride
- Germanium tetra chloride
- Phosphorous oxychloride
- Sulphur hexa flouride oxygen
- Olige-poly iso cyanate ethyl-acetate solution
- Colouring ink for fibre
- Binder of polyurethane or vinyl chloride-vinyl acetate copolymer
- UV resin 1 & 2/Ribbon matrix
- Nylon-12/Ether Ester Elastomer
- Coloured Nylon 12/ Nylon 11/Ether Ester Elastomer
- Elongated polyethylene tape
- Polyester tape/Water blocking tape
- Nylon thread/water swellable yarn
- Polyethylene cord
- Biaxily oriented nylon tape
- Silica tube / rod, other than preform
- Aramid Yarn
- Impregnated Glass fibre reinforcement (Glass rovings)
- Rip Cord
- Nylon 11
- Co-polymer coated MS Tape / Stainless steel tape
- Low smoke zero Halogen compound for sheathing
- Glass yarn / Rovings
- Complex high molecular weight resin in acrylate solution
- Acrylated monomers
- Photoinitiater
- Tert Butyl perbenzoate
- Zinc soap of long fatty acid mixture
- Modified polypropylene
- Ethylene acrylic acid (EAA)/Vinyl ester
List 6 (See S.No.149 of the Table)
- Glass yarn / Rovings
- UV resin
- Complex high molecular weight resin in acrylate solution
- Acrylated monomers
- Photoinitiater
- Tert Butyl perbenzoate
- Zinc soap of long fatty acid mixture
- Modified polypropylene
- Ethylene acrylic acid (EAA)/Vinyl ester”;
List 7 (See S. No. 153 of the Table)
- (a) Laser rods - Neodymium: YAG, Neodymium : Glass, Ruby, Erbium : YAG,
TI : A1203, Alexandrite, HO : YAG (b) Helium- Neon Laser Tubes (c) Semi-conductor
visible lasers (d) Dielectric coated mirrors for visible , near IR & 10.6 micrometer
region (e) Hard dielectric coated optics including thin film polarisers, calcite
polarisers and Beam splitters (f) ZnSe mirrors, ZnSe lenses and ZnSe windows
(g) Gratings and prisms (h) Dye cells and laser dyes (i) Thin film polarisers
for visible, near IR region (j) Electro- optic switches for visible, near IR
and 10.6 micrometer region (k) Flash lamps (Xenon, Krypton) (l) Arc lamps (Krypton)
(m) Second harmonic generation crystals
- Energy storage capacitors
- Thyratrons
- Photodetectors and photomultipliers
- Metering needle valves and pressure indicators
- Spectroscopic grade pure gases viz., Xenon, Krypton, Fluorine, Argon
- Vaccum pumps of capacity upto 20 litres per minute
- Quartz and Special glasses
- Non linear crystals
- Electro- optic and Acousto- optic switches
- Special materials, namely, High purity gases, Kovar, Alumina and Zirconia
fibres, Recrystallised Alumina Tubes, Optical polishing materials, Optical cleaning
material, Dyes and Pitch for optical polishing
- Optical filters
List 8 (See S.No. 300 of the Table)
PARTS, CONSUMABLES AND OTHER ITEMS
- Leather, plastic, rubber coco board, masonite board or plastic board, heels
with or without rubber/PVC top lift
- Toe caps and counters for leather footwear
- Insoles or midsoles and sheets therefor
- Welts made from leather or plastic
- Shoes eyelets
- Felt sleeves
- Heel tips
- Unit soles with or without heels
- Stamping wheels
- Patterns for leather footwear
- Plastic or nylon tipped hammers
- Plastic, PVC or nylon lasts with or without steel hinges
- Clicking boards for leather machinery
- Harness needles for hand sewing pre-punched cards
- Pre-punched cards
- Leather designers kit, namely, designers knife, shoe measuring tape, designers
tape and satra vaccum former
- Industrial sewing machine needles with leather point
- Bell skiving knives
- Band knife for splitting machines
- Cutting and clicking dies
- Aluminium shoe forms with or without heating elements
- Silver marking pencils or pens and refills thereof
- Polyurethane films and polyurethane foils of thickness 0.3 mm. and above
but not above 0.7 mm., for finishing leather
- Non-woven material coated with thermoplastic for the manufacture of toe-counters
- Cellulose board insole sheets
- Leather board made from leather scrap for the manufacture of counters and
stiffeners
- Masonite or coco board
- Sole leather bends
- Styrene butadiene styrene oilbound copolymer for the manufacture of soles
- Rubber, resin rubber, EVA or crepe sheets for soles and heels
- Felt, all types
- Sulphonated / sulphated / oxidised / chlorinated cod oil or sulphonated
/ sulphated / oxidised / chlorinated neats foot oil or sulphonated / oxidised
/ chlorinated fish oil or mixtures thereof
- Pigment finishes for leather
- Aluminium tanning agents, oil tanning agents, zirconium tanning agents,
basic chrome sulphate
- Polishes, creams and similar preparations for footwear or leather
- Casein, resin (other than acrylic resin) and polyurethane binders
- Slip agents of heading 32.08
- Lacquer and lacquer emulsion of heading 32.08
- Preservatives of heading 29.42
- Synthetic fat liquors (with or without hydrocarbons), non-ionic fat liquors,
and mixtures thereof
- Fatty oil or pull up oil
- Syntans
- Solvent soluble dye Mordant Brown of Hue No.79
- Solvent soluble dye Acid Brown of Hue Nos. 75, 76, 97, 98, 126, 127, 144,
159, 160, 161, 162, 165, 188, 191, 194, 196, 214, 237, 256, 265, 268, 270, 282,
290, 298, 303, 310, 321, 322, 349, 355, 358, 359, 360, 362, 365, 373, 387, 396,
402, 422, 425, 432, 433, 434 or 447
- Solvent soluble dye Acid Black of Hue Nos. 50, 52, 71, 76, 82, 83, 84, 85,
115, 132, 169, 172, 194, 209, 210, 213, 215, 221 or 234
- Solvent soluble dye Acid Blue of Hue Nos. 115, 133, 134, 193, 254, 260,
312 or 349
- Solvent soluble dye Direct Blue of Hue No. 59 or 78
- Solvent soluble dye Acid Red of Hue No. 97, 119, 120, 167, 231, 234, 248,
283, 324, 362, 399, 404, 407 or 423
- Solvent soluble dye Direct Red of Hue No. 23, 99, 111 or 239
- Solvent soluble dye Acid Green of Hue No. 20, 26, 68 or 111
- Solvent soluble dye Acid Orange of Hue Nos. 51, 66, 78, 80, 95, 162, 168
or 170
- Solvent soluble dye Acid Violet of Hue No. 54, 80 or 90
- Solvent soluble dye Acid yellow of Hue No. 96, 99, 194, 204, 220 or 243
- Solvent soluble dye Direct Orange of Hue No. 61
- Solvent soluble dye Direct Brown of Hue No. 94 or 209
- Solvent soluble dye Direct Violet of Hue No. 46
- Solvent soluble dye Direct Black of Hue No. 120 or 155
- Solvent soluble dye Direct Green of Hue No. 66.
List 9 (See S. No. 300 of the Table)
OTHER PARTS, CONSUMABLES AND ITEMS
- Formulations containing either Thio Cyano Methyl Thio Benzothiazole (TCMTP)
or Para Chloro Meta Cresol (PCMC) or both; Self basifying chrome tanning agents
- Penetrators
- Stamping foil in strips of width not exceeding 6 inches
- Eyelets, hooks, rings, all type locks including magnetic locks, push clips,
metal handle, key chain holder, corners, puller, fancy caps, clamps, decorative
rivets, decorative fittings and logos, handle holders, studs, sockets, hinges,
buckles, metal frames, tacks and washers
- Buttons, press-fasteners and snap-fasteners falling under heading 96.06
- Magnetic buttons
- Abrasive sheets falling under sub-heading 6805.20
- Shanks and welts falling under headings 73.26 and 64.06 respectively
- The following chemicals for the manufacture of leather chemicals : (I) Phenol
(II) Naphthalene (III) Paraffin wax (IV) Dicarboxylic acid and mixtures thereof
(V) Acrylic acid / Methacrylic acid (VI) Synthetic substitute for Sperm oil
(VII) Synthetic substitute for Neats foot oil (VIII) Alcohol mixture of C9 ,
C10 , C11 (IX)Thio cyano methyl thio benzothiazole (TCMTB) (X) Para chloro meta
cresol (PCMC) (XI) Lactic Casein (XII) Titanium Dioxide (XIII) Iron Oxide (XIV)
Cellulose Acetate Butyrate (XV) Methoxydihydropyrane (XVI) Dioxy Diphenyl Sulphone
(XVII) Dehydro Thio Paratoludine (XVIII) Nitro Amino Phenol Sulphonic Acid (XIX)
Dicyandiamide (XX) Silicone Oil in solvent or water (XXI) Sodium Picramate (XXII)
Methyl Pyrozollic Acid (XXIII) Itaconic Acid (XXIV) 1-Methoxy Propanol-2 (XXV)
Ethyl Acetate (XXVI) Butyl Acetate (XXVII) 2 Ethyl Hexyl Acetate (XXVIII) Emulsifiers
(XXIX) Ethyl Glycol (XXX) Butyl Glycol
List 10 (See S. No. 350 and 351 of the Table)
- 765 KV Transformers;
- 765 KV Reactor;
- 765 KV Circuit Breaker;
- 765 KV Isolators;
- 765 KV Current Transformer;
- 765 KV Capacity Voltage Transformer;
- 765 KV Surge Arrestors;
- INVAR/ACSS Conductor for high temperature application;
- 765 KV Polymer Long Rod Insulators
- Emergency Restoration System (ERS) for extra-high voltage transmission Line;
- Overhead Optical Ground Wire (OPGW), including hardware and accessories
such as Vibration Damper, Joint Box, Suspension and tenslon clamps;
- High Voltage DC Divider and CT;
- High Voltage DC Reactor;
- High TRV Circuit Breaker for High Voltage DC application;
- Protective Spark Gap and Damping Equipment for Thyristor Controlled Series
Compensator (TCSC)/ Fixed Series Compensator (FSC);
- Thyristor Controlled Series Compensator (TCSC)/ Fixed Series Compensator
(FSC) MOV for Series Compensation;
- Optical Current Transformer;
- 400 KV Extra High Voltage Cables;
- Gas Insulated Switchgear equipment for 220 KV and above;
- Thermo Vision Camera;
- On-line Puncture insulator detector;
- Hot line Kits and Tools for transmission line live maintenance;
- Hot line washing equipment for insulators.
List 11 (See S.No.352 of the Table)
Textile machinery for man-made fibre and yarn industry:-
- Machinery for continuous polymerization plant:
(a) Polymerizing equipment, including esterification reactor, vapor separator,
pre-polymerization reactor, polymerization reactor, static mixers, polymer pumps
and automatic chipping system; pre-polyester pumps, spray condensers, probe
assemblies, vacuum pumps, vacuum equipment such as ejectors, jacketed valves
and jacketed control valves, pre-poly filters, mechanical seals and cooling
system of polymerization reactors (b) Slurry and additive preparation system,
such as high shear agitators, mill feed pumps, filters and injection systems
for additive and slurry pumps (c) HTM (Heat Transfer Medium) and heating system;
HTM pumps (d) PTA conveying system, including container unloading platform and
rotary feeders; (e) Polymer transfer line equipment, including polymer coolers
and jacketed polymer pumps; tandem drives on-line master batch and additive
injection system (f) Solid state polymerization equipment, including pre-crystalliser,
crystalliser and rotary feeders; (g) Process control equipment, including viscosity
measuring equipment (Viscometer) and, Distributed control system; (h) Atomic
absorption spectrometer, X-ray fluorescence spectrometer; (i) Extraction tower
with accessories like centrifugal dehydrator and blower; (j) Chip conveying
system and accessories like blowers, filters and rotary and screw feeders; (k)
Solid State polymerization system including blowers and nitrogen plant; (l)
Crushing and melting system for caprolactum; (m) V.K. Tube; (n) Screw Feeder;
(o) Centrifugal dehydrator; (p) Drying Tower; (q) Circulating Blower; (r) Fuel
Oil Bowler;
- Machinery for synthetic fibre plant:
(a) Spinning equipment, including manifold spinning beams, pre-heating ovens
and finish applicators; (b) Polymer transfer line, including extruder, color
blender and continuous polymer filter (CPF); polymer valves (c) Draw-off equipment,
including take-up equipment, thread cutters and aspirators, spin defect detectors,
draw off unit, tow guide equipment, lace-up or suction gun and tow suction unit;
traversing unit (d) Draw line (Fibre line), including creel, tow guide stand,
draw frames, drawing bath, heat set calender/thermosetting/annealer unit, tow
assembler, draw-off unit, tensiometer roll, steam box, crimping machine, spray
box, tow guide system, cable dryer, tow cutter and grinding machine and tow
cutter reels; (e) Hydraulic baling press, strapping machine, dock levelers and
automatic bale handling equipment; (f) Process control equipment, including
precision anemometer, thermo-hygrograph, aspiration psychrometer, ultrasonic
cleaning unit, spinneret inspection system, infrared pyrometer, optical temperature
measuring instrument; pack cleaning equipment with hydrolysis and vacuum pryolysism
and pack press (g) Textile laboratory equipment for fibre testing, including
favimat, fafegraph HR, coring machine, stereo microscope, crimper tester, fibre
shrinkage tester, refractometer, conductivity meter;
- Machinery for synthetic filament yarn plant :
(a) Spinning equipment, including manifold, spinning beams and pre-heating ovens;
(b) Polymer transfer line, including extruder, color blender and continuous
polymer filter (CPF); (c) Take-up equipment, including take-up frames, oil application
unit, godet rollers, yarn guides, thread cutters and aspirators, lace-up/suction
gun, take-up and draw winders; (d) Packing and automation equipment, including
automatic doffers, automatic bobbin storage and handling system; (e) Draw texturising
machine, including creel, intermingling jets, ceramic guides, doffers; (f) Textile
laboratory equipment for yarn testing, including automatic tensile tester, projection
microscope, denier skein reel, entanglement tester, denier auto count, dynafil,
uster tester, online finish checking instrument.
- Other capital goods for synthetic fibre/yarn industry:
(a) Spin draw winding machine; (b) Spindles; (c) Yarn guides; (d) PSM Rings;
(e) Ballon Control Rings; (f) Travellers; (g) Extruders; (h) Extruder barrel;
(i) Online filamentation detector;
- Machinery for Regular/HWM Viscose Staple Fibre Plant:
(a) Sintered Filter Media; (b) Automatic High Speed centrifugal separator; (c)
Fibre production lines; (d) Fibre Cutter; (e) Fibre Dryer; (f) Pneumatic Fiber
Fidders; (g) Baling Press; (h) Plate Heat exchanger; (i) Graphite heat exchanger;
(j) Neno filtration plant;
- Machinery for Lyocell Fiber Plant:
(a) High viscosity handling equipment including pulper; (b) Reactor for cellulose
dissolution; (c) Thin film evaporator with accessories; (d) Spinning module;
(e) Air quenching systems and associated control systems; (f) Fiber washing
and treatment machines; (g) Baling Press;
- Process and quality control equipment for artificial man-made cellulosic
fibre/yarn industry:
(a) Robotic Fiber sampler; (b) Spectrophotometers for fiber color evaluation;
(c) Automatic absorption spectrophotometer; (d) X-ray phloroscence spectrometer;
(e) Automated oil pick up analyzer; (f) Automated titrator; (g) Textile laboratory
equipment for testing of fiber properties such as denier, tenacity, elongaton,
spinning fault, UV value and microscope with fibre imaging system;
- Machinery for Viscose Rayon Filament Yarn/ Rayon Tyre Yarn:
(a) Twin rolls press; (b) Ageing Drum Hopper; (c) Blowers and Fans for Alkali
Cellulose Transport system; (d) Slorry Pumps including VFDs; (e) Automatic Pulp
handling system; (f) Simplex/Churn; (g) Plate and Frame Filter Press; (h) Viscose
Pumps (Gear/Screw Pumps including VFDs); (i) Evaporator; (j) Heat Exchager-
Hastalloy Plate and Frame Type; (k) Crystallizer; (l) Vacuum System - Ejectors,
Boosters, Vacuum Pump and Vacuum Filter; (m) Auto bagging and weighing system;
(n) Sand Filters; (o) Centrifugal Pumps including VFDs; (p) Pot Spinning Machine;
(q) Spinning Pots and Pot Motors; (r) Metering Gear Pumps for Viscose; (s) Automatic
cake wrapping system; (t) Air Splicer for Knotting Yarn; (u) Automation for
Cone Weighing and Cone Doffing; (v) Auto Cone Packing and Palletizing; (w) Environment
Monitoring like Gas Monitors for Carbon-di-Sulfide (CS2), Hydrogen Sulfide (H2S)
Sulfur Dioxide (SO2); (x) BOD and COD Monitors; (y) Textile Laboratory Equipment
for Yarn testing namely, Universal Computerised automatic Tensile Tester and
Denier Tester; (z) Gas Chromatography and Mass Spectrometer.
- Other machinery for man-made fibre and yarn industry:
(i) Pulp slurry with automatic slurry control systems (ii) Alkali Cellulose
Cooler-Fluidized with automatic temperature control (iii) Press Lye Filter (iv)
Xanthator with automation (v) Rough and Fine Grinders for Viscose (vi) Viscose
Filters (vii) Viscose deaerators (viii) Color slurry injection pumps (ix) Slurry
homogeniser system (x) After treatment line for washing fibre, conveying of
fibre and chemical treatment (xi) After treatment chemicals filtration system
(xii) Pneumatic fibre squeezing system (xiii) Wet fibre opener (xiv) Dry fibre
opener (xv) Online fibre contamination and removal system (xvi) Automatic bale
handling system (xvii) Bale inspection system (xviii) Automatic candle filters
for spin bath filtration (xix) Dry condensing system for low pressure vapour
removal in evaporators, crystallisers and viscose deaerators (xx) Low temperature
multi effect distillation (LT-MED) system and mechanical vapour compression
for effluent treatment by water desalination process (xxi) Electrical protecting
devices and relays falling under tariff item 8536 49 00 (xxii) Flame proof motors
falling under tariff item 8536 90 90 (xxiii) Process monitoring and control
equipment falling under tariff item 8538 10 10 (xxiv) Distributed control system
falling under tariff item 8537 10 10 (xxv) Precision gear pumps for highly viscous
polymers (xxvi) Hydraulic screen changing type continuous filters for viscous
polymers (xxvii) Static mixers for high viscosity polymers (xxviii) High pressure
stainless steel micro spinnerettes (less than 80 micron hole size) for high
viscosity polymers (xxix) High efficiency fibre dryer for Iyocell fibres (xxx)
High capacity fibre openers suited for Iyocell fibres (xxxi) Solvent purification
system including ion exchange and membrane based systems falling under tariff
item 8445 19 30 (xxxii) Energy efficient multi staged evaporators/distillation
columns for solvent recovery falling under tariff item 8445 19 30 (xxxiii) Open
end spinning machine (xxxiv) Autoconer (xxxv) Uster Tensorapid (xxxvi) Positive
rapier loom (xxxvii) Jacquard
List 12 (See S. No. 353 of the Table)
(A) Sewing machines with in-built motors, falling under tariff item 8452 29 00
(B) Machinery for garment sector, namely:-
- Garment sand blasting or brushing machine;
- Hook and bar machine;
- Hydro-extractor machine;
- Garment washing machine falling under tariff item 8450 20 00;
- Waistband attaching machine;
- Label or tag inserting machine;
- Profile cutting machine
- End cutter with cloth press track;
- Collar point trimmer/gear knotcher machine;
- Laser colour fading/marking/drawing machine;
- Laser operated colour spraying machine for garments;
- Needle detector machine;
- Fusing machine;
- Fabric laying machine;
- Computerised cutting machine
(C) Machinery for manufacture of technical textiles, namely:-
- Precision coating heads
- Turret winder and unwinders
- Coating equipment for scrim fabrics
- Multi-colour roto gravure printing machine for coated fabrics
- Printing equipment for sineage for coated or laminated fabrics
- Grommet fixing machine
- Ultra sonic, hot air and wedge RF/laser polymetric sealing machine
- Weatherometer
- Automatic thickness gauze
- Puncture resistance
- Twisting Machines
- Material Handling system for Twisting Machines
- Data capture system for Twisting Machines
- Balancing Equipment for Cable Corder Spindle Motors
- Shuttle-less looms
- Reeds for weaving machines
- Warp defects detection system
- Parts for Airjet weaving machines
- Parts for projectile weaving machines
- Parts for Rapier weaving machines
- Warp knotting system
- Take up system for weaving machine
- Creels for weaving machines
- Package change system for creels
- Process control equipment namely, Tension meters, On-line denier checking
system, On-line twist checking system, On-line EDS monitoring system, Filamentation
detector, Fluff Detector, Automatic Fabric Inspection System, Tacho-meters
- Storage and Transport systems namely, Automated fabric transport system
and Automated fabric packing system
- Finishing Machines namely, Dipping Machine for Tyre Cord/industrial Fabrics,
Coating Machines, Dipping Machine for beting duck, Stenter for Technical Textiles,
Embossing Rollers, Parts and Accessories for Dip and coating units, Hydraulic
Control for Accumulator, Dynamic Braking for Pull Rolls System, De-webber system,
Burners with Controllers
- Testing equipment, namely, Tensile Tester, Thermal Shrinkage Tester, Twist
Tester, Fatigue Tester
(D) Woollen machinery items, namely:-
- Automatic Hopper Feeder
- Greasy Wool Opener
- Tow-to-Top Converter
- Automatic/Semi-Automatic Pump Press
- Ring frame with 50 mm Ring or below PLC/Computer controlled
- PLC/ Computer Controller Assembly Winding machine
- PLC/ Computer controlled Two- for Twister/Three-for-one Twister
- Twisting /covering machine for Lycra Yarn
- Automatic cleaning machine for Heald, Reeds and drop wires.
- Electric/ Electronic/ motorized beam trolley with Harness lifting arrangement.
- Open Width scouring machine/Rope scouring machine
- Damping unit for fabric conditioning
- Automatic Weft straightener
- Shearing machine
- Continuous crabbing machine
- Wollen ring frame
- Fibre/Yarn/Fabric testing equipment namely, Fineness meter, Evenness Tester,
Light Fastness Tester, Strength Tester, Length Measurement Tester, Crease Recovery
Tester, Projection Microscope, Pilling and Abrasion Tester, Colour Comparator
for instant observation of matched shades, Yarn friction and Hairiness meter
and Seam Slippage Tester.
- Rag tearing machine
- Fibre opening and blending machine
- Self Acting spinning frame
- Raising machine
(E) Machinery for use with shuttleless looms, namely, electronic dobby and jacquard.(F)
Machinery for manufacture of denim fabrics, namely:-
- Sand blasting or brushing machine
- Washing machine falling under tariff item 8450 20 00
(G) Machinery for manufacture of non-wovens textiles, namely:-
- Complete production lines for the production of following non-wovens, up
to rolled goods preparation and packing, namely:
(a) Needle punched non-wovens (b) Chemically bonded non-wovens (c) Thermally
bonded non-wovens (d) Stitch bond non-wovens (e) Spun laced (hydro entangled)
non-wovens
(f) Spun bonded non-wovens (g) Melt blown non-wovens (h) Spun bond melt blown
(SMS) non-wovens
- Machinery for finishing of all non-wovens
- Machinery for converting non-wovens into made-ups
(H) Other machinery for use in textiles industry, namely:-
- Spandex/elastane yarn attachment on ring frame for manufacturing core spun
yarn
- Single end warping machine
- Single end sizing machine
- Reaching-in machine
- Humidification plant
List 13 (See S. No. 356, 358 and 359 of the Table)
- Land Seismic Survey Equipment and accessories, requisite vehicles including
those for carrying the equipment, seismic survey vessels, global positioning
system and accessories, and other materials required for seismic work or other
types of Geophysical and Geochemical surveys for onshore and offshore activities
- All types of Drilling rigs, jackup rigs, submersible rigs, semi submersible
rigs, drill ships, drilling barges, shot-hole drilling rigs, mobile rigs, workover
rigs consisting of various equipment and other drilling equipment required for
drilling operations, snubbing units, hydraulic workover units, self elevating
workover platforms, Remote Operated Vessel(ROV)
- Helicopters including assemblies/parts
- All types of Marine vessels to support petroleum operations including work
boats, barges, crew boats, tugs, anchor handling vessels, lay barges and supply
boats, Marine ship equipment including water Maker, DP system and Diving system
- All types of Equipment/units for specialised services like diving, cementing,
logging, casing repair, production testing, simulation and mud services, oil
field related lab equipment, reservoir engineering, geological equipment, directional
drilling,Stimulation, Coil Tubing units, drill stem testing (DST), data acquisition
and processing, solids control, fishing(as related to downhole retrieval in
oil field operations), well control, blowout prevention(BOP),pipe inspection
including Non Destructive Testing, coring, gravel pack, well completion and
workover for oil/gas wells including wireline and downhole equipment
- All types of casing pipes, drill pipes, production tubing, pup joints, connections,
coupling,
kelly, cross overs and swages, Drive Pipes
- All types of drilling bits, including nozzles, breakers and related tools
- All types of oil field chemicals including synthetic products used in petroleum
operations, oil well cement and cement additives, required for drilling, production
and transportation of oil or gas
- Process, production and well platforms for oil, gas and water injection
including items forming part of the platforms and equipment required like process
equipment, turbines, pumps, generators, compressors, primemovers, water makers,
filters and filtering equipment, Telemetery, Telecommunication, Tele-Control
and other material required for platforms
- Line pipes for flow lines and trunk pipelines including weight- coating
and wrapping
- Derrick barges, Mobile and stationary cranes, trenchers, pipelay barges,
cargo barges and the like required in the construction/installation of platforms
and laying of pipelines
- Single buoy mooring systems, mooring ropes, fittings like chains, shackles,
couplings marine hoses and oil tankers to be used for oil storage and connected
equipment, Tanks used for storage of oil, condensate, water, mud, chemicals
and related materials
- All types of fully equipped vessels and other units/equipment required for
pollution control, fire prevention, fire fighting, safety items like Survival
Craft, Life Raft, fire and gas detection equipment, including H2S monitoring
equipment.
- Mobile and skid mounted pipe laying, pipe testing and pipe inspection equipment
- All types of valves including high pressure valves
- Communication equipment required for Petroleum operations including synthesized
VHF Aero and VHF Marine multi channel sets
- Non-directional radio beacons, intrinsically safe walkie-talkies, directional
finders, EPIRV, electronic individual security devices including electronic
access control system
- Specialized antenna system, simplex telex over radio terminals, channel
micro wave systems, test and measurement equipment
- X-band radar transponders, area surveillance system
- Common depth point (CDP) cable, logging cable, connectors, geo-phone strings,
perforation equipment and explosives
- Wellhead and christmas trees, including valves, chokes, heads spools, hangers
and actuators, flexible connections like chicksons and high pressure hoses,
shut down panels
- Cathodic Protection Systems including anodes
- Technical drawings, maps, literature, Data tapes, Operational and Maintenance
Manuals required for petroleum operations
- Sub-assemblies, tools, accessories, stores, spares, materials, supplies,
consumables for running, repairing or maintenance of the goods specified in
this List
List 14 (See S. No. 360 of the Table)
- Land Seismic Survey Equipment and accessories, seismic survey vesels, global
positioninig system and accessories, and other materials required for seismic
work or other types of Geophysical and Geochemical surveys for on-shore activities
- All types of Drilling rigs, shot-hole drilling rigs. Mobile rigs, workover
rigs consisting of various equipment and other drilling equipment required for
drilling operations, snubbing units, hydraulic workover units, self-elevating
workover platforms
- All types of Equipments / units for specialized services like, cementing,
logging, casing repair, Production testing, simulation and mud services, reservoir
engineering, geological equipment, directional drilling, Stimulation, Coil Tubing
units, drill stem testing (DST), data acquisition and processing, solids control,
fishing (as related to downhole retrieval in coal bed methane operations), well
control, blowout prevention (BOP), pipe inspection including Non Destructive
Testing, coring, gravel pack, well completion and workover for CBM wells including
wireline and downhole equipment
- All types of casing pipes, drill pipes, production tubing, pup joints, connections,
coupling, Kelly, cross overs and swages, Drive Pipes
- All types of drilling bits, including nozzles, breakers and related tools
- All types of coal bed methane chemicals including synthetic products used
in coal bed methane operations, required for drilling, production and transportations
of gas
- Process, production and well installation for CBM and water injection including
items forming part of the installation and equipment required like process equipment,
turbines, pumps, generators, compressors, primemovers, water makers, filters
and filtering equipment, Telemetery, Telecommunication, Tele-Control and other
material required for installations
- Line pipes for flow lines and trunk pipelines including weight-coating and
wrapping
- Tanks used for storage of coal bed methane, water, mud, chemicals and related
materials
- All types of fully equipped units/equipment required for pollution control,
fire prevention, fire fighting, safety items like fire and gas detection equipment,
including H2 S monitoring equipment
- Mobile and skid mounted pipe laying, pipe testing and pipe inspection equipment
- All types of valves including high pressure valves
- Communication equipment required for operations including synthesized VHF
Aero and VHF multi channel sets, Non-directional radio beacons, intrinsically
safe walkie-talkies, directional finders, EPIRV, electronic individual security
devices including electronic access control system
- Specialized antenna system, simplex telex over radio terminals, channel
micro wave systems, test and measurement equipment
- Area surveillance system
- Common depth point (CDP) cable, logging cable, connectors, geo-phone strings,
perforation equipment and explosives
- Wellhead and Christmas trees, including valves, chokes, heads spools, hangers
and actuators, flexible connections like chicksons and high pressure hoses,
shut down panels , Cathodic Protection Systems including anodes
- Technical drawings, maps literature, Data tapes, Operational and Maintenance
Manuals required for coal bed methane operations
- Sub-assemblies, tools, accessories, stores, spares, materials, supplies,
consumables for running, repairing or maintenance of the goods specified in
this List
List 15 (See S. No. 366 of the Table)
- All types of Refinery Process Units including distillation (CDU, VDU,
Condensate Fractionator), thermal cracking (Delayed Coker, Visbreaker, Flexicoker),
catalytic cracking (FCC, Hydrocracker), lube processing (Deasphalting, Dewaxing,
Solvent Extraction), hydro-desulphurisation/hydrotreating (Naphtha, Diesel,
VGO, ARDS, LC Fining, H. Oil), alkylation, isomerisation, catalytic reforming,
treating (Merox, Amine), recovery (Propylene, Ethylene, Butane), synthesis (MTBE,
TAME), gas concentration plant, bitumen blowing, sour water stripping and extraction
(Pentane, Hexane, BTX).
- All types of Hydrogen Generation, Recovery and Purification Plants, Sulphur
Recovery Plants including Tail Gas Treatment Units, with associated components
and equipments, including reactors (like shift, Claus, hydrotreater, CBA, desulphurizer),
furnaces, steam reformers, waste heat boilers, condensers, Pressure Swing Adsorption
(PSA) systems, incinerators, vessels, boilers, pumps, compressors, drivers,
alongwith associated instrumentation and control systems and auxiliaries (skidded
or otherwise).
- All types of Utility Systems, including Nitrogen Systems comprising of generation,
storage and vaporization plants, Flare Systems comprising of flare tips, stacks,
seal drums, knockout drums and pumps, Refrigeration Systems comprising of compressors,
refrigerant storage and heat exchangers, Emergency Power Systems comprising
of generators, UPS and batteries, with component equipments and all systems
auxiliaries, instrumentation and control systems.
- All types of Process Subsystems, including Continuous Catalyst Regeneration
Systems for Reformer, Recovery Plus Systems for Reformer, Power Recovery Train
Systems for FCC, Feed Nozzles for FCC, Vapour Recovery Systems, Cryogenic Systems
for LPG either supplied separately or as a whole, with component equipments,
drivers, instrumentation and control systems, and auxiliaries.
- All types of Water Handling and Treatment Systems, including sea water intake
systems comprising of sea water band screens, Desilting systems for still basin,
Sea Water filtration/Chlorination Systems, Desalination plants, Cooling Water
Towers, Demineralization plants, Condensate Polishing Systems, Deaerators and
Potable Water Systems, and all component equipments, vessels, pumps, vapourisers,
condensers, filters, eductors, heat exchangers, drivers, screens, framing structures,
gates, instrumentation and control systems, activated carbons, ion exchange
resins, resin traps, additive injection systems and auxiliaries (skidded or
otherwise)
- All types of Effluent Solids/Liquids/Gaseous Processing, Handling, Control,
Abatement and Disposal Systems, including plate interceptors, dissolved air
floatation devices, skimmers, hydrocyclones, clarifiers, chemical dosing systems,
acid treatment and biological treatment systems, Spent Caustic Neutralisation
Systems and Sewage Filtration/Treatment Systems, with component equipments,
instrumentation and control systems.
- All types of Air Handling Systems and Equipments, including plant/instrument
air compressors, FD/ID fans, blowers, dehumidifiers, pneumatic systems, mixers,
dryers, intake filters, vents, silencers, cyclones, stacks, manifolds, ducts,
with drivers, auxiliary seal/lube/control oil systems, instrumentation and control
systems.
- All types of Fired Heaters and Boilers, with radiant coils and sections,
transfer line assemblies, convection coils and sections, cross over/jump over
pipes, fittings, tube sheets, tube supports, refractory materials, structural
steel supports, casings, stacks, dampers, soot blowers, ducting systems, gas/oil/dual
burner assemblies, burner tiles, waste heat boilers (WHB), steam generators,
economizers, air/fuel preheat systems, FD/ID fans, fuel gas/oil kids, and including
LPG vaporizers, steam superheaters, heat recovery steam generators, electric
heaters, FCC flue gas coolers, steam reformers, CO boilers, circulating fluidised
bed boiler, auxiliary boilers, process interheaters, thermal reactors, thermal
incinerators, coke feeders, limestone feeders, ESP/baghouse filters, alongwith
associated instrumentation & control systems, including burner lighting, flame
detection and burner management systems.
- All types of Compressors, including axial, centrifugal, diaphragm, reciprocating,
rotary screw and sliding vane type compressors, for gas, air, hydrocarbon and
all special services including FCC Power Recovery Trains (PRT), LPG vapour return
blowers, with drivers of motor or steam turbine or expansion turbine or engine
or gas turbine or hydraulic turbine types, speed governor systems, seal/lube/control
oil systems (skidded or otherwise), gear assembly, bearings, barring gears,
clutch, couplings, intercoolers, after coolers, suction filters, instrumentation
& control systems including vibration monitoring anti surge control, inlet guide
vane control, sequencer control, control panel and machine condition monitoring
systems.
- All types of Heat Exchangers, including shell and tube, double pipe, kettle,
plate welded plate, high pressure (breech lock), Armstrong and brazed types,
with plain or fin or High Flux or U tubes for cooling inter-cooling, trim cooling,
chilling, condensing, crystallizing, heating, vaporizing or re-boiling services,
with tubes, tube sheets, head assemblies, shells, flanges, bolts and nuts, gaskets,
baffles, tie rods, instrumentation and control systems.
- All types of Air Cooled Exchangers, for cooling, inter-cooling, trim cooling,
chilling and condensing services, with plain/finned tubes, of carbon steel,
admiralty brass, alloy steel, stainless steel, monel or titanium or other materials,
with fans, fan drivers, structural steel support frameworks, instrumentation
and control systems, anti vibration systems.
- All types of Agitators and Mixers, including static, jet, dilution types,
motor drivers, aeration systems, with instrumentation and control systems.
- All types of Filters, Screens and Strainers, including backwash, bucket,
carbon, cartridge, duplex, pressure / mechanical, rotary, drum, sand, sock/bag,
vaccum types, and special FCC net bottoms catalyst filters, screens, strainers,
demisters and sea water clarifiers, with instrumentation and control systems.
- All types of Vaccum Producing Equipments, including ejectors, educators,
venturies, with instrumentation and control systems.
- All types of Materials Separation systems, including cyclones, centrifuges,
coalescers, dust collectors, electrostatic precipitators, oily water separators,
flocculators, and specialized systems of Crude Oil Desalters, Reactor Cyclones
and Regenerator Cyclones for FCC, third Stage Separators and Fourth Stage Cyclone
Separators for FCC, with vessel internals, grids, distributors, supports, instrumentation
and control systems.
- All types of Materials Transporting Equipments, including loading and unloading
arms and racks, gantries, dispatch tanks, loading / transfer pumps, hydraulic
systems, weigh bridges, Diesel shunters, feed or injection or spray nozzles,
skimmers, soot blowers, with instrumentation and control systems, including
load cells and metering stations.
- All types of Electrical Equipments including switchyard equipments, transmitters,
relays, solar power systems, including solar panels, batteries and charger,
phase shift monitors, motor or steam turbine generators, protection relays for
generators, auxiliary seal/lube/control oil systems, actuators, annunciators,
lighting masts, lighting fittings, panels, batteries and battery chargers, bus
ducts, all types of cables including power/instrument/compensating/fibre optic/coaxial/control
cables, cable joints, capacitors, distribution boards, fittings, substations,
grounding/neutral resistors, heat tracing systems including insulation, microprocessor
based
process controllers, local control stations, motor control centres, power control
centres, HT/LT motors, shock eliminators, HT/LT switch gears, transducers, HT/LT
transformers, UPS and variable speed drivers over current protection devices,
instrumentation and control systems including load distribution and management
systems and auxiliaries, (skidded or otherwise).
- All types of Materials Handling Equipments including belt or pneumatic conveyors,
ducts, hoists, bucket or jib cranes, (with or without gangways), pipe and hoses,
funnels, hoppers, disengaging lock hoppers, catalyst addition pots, valves and
sampler devices, bagging, weighing and bag stitching systems, weigh bridges,
buoy systems for crude oil receipt, pipeline and manifolds with valves, fenders,
mooring aids, laser docking systems, product tanker loading facilities, with
associated equipments, instrumentation and control systems, and auxiliaries.
- All types of coke handling and storage equipments, including coke crushers,
coke cutting systems, coke drum unheading devices, coke drum switching systems,
coke conveyors, stackers and reclaimers, silos/hoppers, dust abatement systems,
belt weighers, Sulfur Handling and Storage Equipments and Sulphur Granulation
or Flaking or Prilling Systems with associated equipments, instrumentation and
control systems and auxiliaries.
- All types of Product Filling Systems, including LPG bottles filling machines
and bitumen drum filling machines, and associated equipments, instrumentation
and control systems and auxiliaries.
- All types of injections and Dosing Packages, for Injection or metering or
dosing of chemicals, additives, inhibitors, odourisers, oxygen scavengers, blocides,
chlorine, polymers, caustic, acids, emulsifiers, antifoams or antifoulants,
with their component equipments, like drums, tanks, pumps, instrumentation and
control systems, auxiliaries (skidded or otherwise).
- All types of Pumps, including API or non-API, centrifugal , diaphragm, in-line,
jockey, vertical, booster, barrel, gear, Sundyne, screw, ram, reciprocating
or submersible types, single stage or multistage types, for petroleum crude
or intermediate products or petroleum products and byproducts, water including
sea water and boiler feed water, chemicals, slops or sludge services, liquid
booster for LPG (cryogenic), with motor or steam turbine or hydraulic turbine
or diesel engine drivers, and instrumentation and control systems, auxiliaries,
including seals flushes, gear boxes, water cooling harnesses and lube oil consoles.
- All types of Tanks and Storages, including plate materials, flanges, fasteners,
nozzles, fittings and other components for assembly/construction/erection at
site, and instrumentations, including relief, breather, and rim vent values,
nitrogen blanketing systems, roof drain pipings, rim seals, flame arrestors
and automatic tank gauging systems, for oil, hydrocarbon (petroleum crude, products,
byproducts, intermediate and blend components), water, chemicals, slops, sludge
storage in either cone, fixed, floating, dome or internal floating roof configurations,
solids storage in silos, bins or hoppers and LPG/propylene/ethylene/propane/butane
storage in spheres, bullets or cryogenic tanks, and instrumentation and control
systems.
- All types of Columns, either supplied separately or together, comprising
of grids, screens, distributors, nozzles and their supports/fasteners and accessories,
for services like absorption, desorption, stripping, fractionation, distillation,
splitting, stabilization, extraction, washing or scrubbing services, and column
internals comprising of trays either bubble, jet, multi downcorner (MD), sieve
or valve trays, or either random or structured type packings, and their appurtenances,
instrumentation and auxiliaries.
- All types of Vessels and Drums, either supplied separately or together,
comprising of shells, heads, internals, grids, screens, demisters, coalescers,
boots, distributors, packing and their supports/fasteners and accessories, for
storage, separation, reaction, mixing, decoking, degassing, flashing, draining,
blow down, desuperheating, drying, sealing, receiving, surge and interface controlling
services, and their appurtenances, instrumentation, insulation and auxiliaries.
- All types of Reactors, either supplied separately or together, comprising
of shells, heads, catalysts, support materials, grids, screens, demisters, coalescers,
distributors, packings and supports/fasteners and accessories, for carrying
out cracking (FCC Reactor and Spent Catalyst Stripper), coking (Coke Drums),
visbreaking, hydrotreating, hydro desulphurization, hydrocracking, catalytic
reforming (Platformer), shift, sulphur (Claus), adsorption (CBA, PSA), oxidizing,
treating (Merox), regenerating (FCC Regenerator/Combustor), desulphurising reactions,
spray and mixing nozzles and their appurtenances, instrumentation and auxiliaries.
- All types of Instrumentations, including various types of level/pressure/density/temperature/flow
instruments, detectors, level/pressure/draft/temperature gauges, capacitance/level/limit,
proximity switches, transmitters, annunciators, controllers, converters, transducers,
temperature sensor assemblies, load cells, orifice assemblies, rotameters, pitot
tubes, venturies, meter runs, control/metering panels, pneumatic/motorised/hydraulic/piston
actuators, recorders, solenoid operated valves, transmitters, thermocouples,
temperature elements, sight glasses, amplifiers, annubars, barriers / isolators,
all types of flow meters, custody transfer meters, meter provers, density meters,
electromechanical/magnetic/nuclear/radar/ultrasonic level indicators, weighing
and bagging systems and test equipments for testing and calibration of above
instruments.
- All types of Transmitters and Monitors, including electronic transmitters
for measurement of level, pressure, flow speed, temperature and weight, and
monitoring systems for ambient air, fugitive emissions, pipelines, speed, stack
emissions and vibration.
- All types of Control Equipments, including ball/butterfly/gate/globe/needle/plug/bellow
sealed type control valves, shutdown valves, self actuating, solenoid, on/off,
fast acting quarter turn, pressure regulating, breather and pressure/vaccum
relief valves, pilot operated safety valves, and valves for specialised services,
such as catalyst addition systems and lock hopper control systems.
- All types of Control Hardware and Software Systems, including Distributed
Control Systems (DCS), Emergency Shutdown Systems (ESD), Programmable Logic
Controllers (PLC), Security and Access Systems, Terminal Automation Systems,
Advanced Process Control (APC) Systems with Real Time Optimizer (RTO), Supervisory
Control and Date Acquisition (SCADA) Systems, and Refinery Information Management
System (RIMS) with operator panels, computers, date loggers, interfaces, relay
cabinets, engineering controls, large display screens, microwave transmission
and receiver equipments, logic multipoint recorder/multiplexers, and their hardware
and software
- All types of Fire and Gas Detection Systems, consisting of LEL/fire/smoke/UV/gas/IR/toxic
detectors, panels, cables, weather protection housing, junction boxes, detector
cards, cabinets, calibration equipments, beacons and lights, and their hardware
and software.
- All types of Pipes, Tubes and Hoses, including cladded, coated, lined, made
of carbon steel, low temperature carbon steel, alloy steel, stainless steel,
GRP, copper, aluminium HDPE, PP, fibre glass, monel incolloy, titanium or any
other materials, and other in seamless or welded construction, for all applications
fields joint coating materials, with instrumentation and control systems like
pipeline surge relief systems, auxiliaries, painting and insulation.
- All types of Pipe Fittings, including elbows, connectors, tees, pipe fabrication
accessories, spargers, nozzles, plugs, packing glands, rings, flanges, gaskets,
supports, pads, manifolds, siphons, shock absorbers, struts, fasteners, mitre/long
radius/short radius bends, sockolets, weldolets, spray nozzles, graylock fittings,
swagelock/compression fittings, insulating kits, special steam traps, liquid
float traps, bellows, flexible hoses, couplings, vent silencers, and speciality
items like Teflon sliders, standpipe expansion joints, spring supports/hangers,
scraper tees, pipeline and manifolds with valves, cleaning/scraping/monitoring
pigs, pig launcher, pig receiver and pig detection system, cathodic protection
system with sacrificial anodes and CP monitoring system, with instrumentation
and auxiliaries.
- All types of valves, including ball, butterfly, check, diaphragm, gate,
double disc or knife gate,, globe bellow sealed globe, jacketed, plug, through
conduit type valves, with manual/gear/motor/hydraulic operations, for oil, water,
steam, hydrocarbon, chemical, cryogenic, subsea, nitrogen blanketing and thermic
fluid services, and specialised services valves, like FCC butterfly valves,
Cooker switch valves, standpipe slide valves, flue gas divertor valves, pressure
reducing station systems, pipeleine and manifolds and riser tie-in manifolds.
- All types of Gaskets and fasteners, including anchor/foundation/structural
bolts, flanges, studs, nuts, washers, and metallic/soft/spiral wound gaskets
and O-rings.
- all types of Structural Steels, Materials and Plates including carbon steel/LT
carbon steel/alloy steel/stainless steel plates, bars, rolled sections, tubular
sections, HYSD bars, dampers, prefabricated tresties, pipe bridges with pre-installed
pipes, loading platforms, steel A frames, blast proof doors, steel tubulars,
seamless and welded, special steel piles, dolphins, low, medium and high strength
steel, fasteners, and special application refractory/copalite/sulphide resistant
quick setting cements.
- All types of ferrous or non-ferrous pre-fabricated/semi-fabricated, Plant
Structures, including pipe racks, supporting frames, trestles, pipe bridges
with pipes pre-installed and pre-insulated.
- All types of Analyzers, either on-line or off line, for measurement of H2S,
Oxygen, NOX, SOX, CO2, CO, hydrocarbon, dew point, density, conductivity, pH,
combustible gases, oil in water, vapour pressure, silica, sodium, distillation,
flash point, moisture, viscosity and smoke point, and analyzer sampling systems/cubicles,
analyzer houses with sample conditioning systems, sample probes/sensors, tubings,
HAVC systems, calibration gases cylinders and Drager tubes.
- All types of Laboratory Equipments, including sampling, quality control
and analytical equipments for testing and measurement of various petroleum crude/products/by
products quality parameters, and including sample collection equipments, gas/ion
chromatograph, CFR engines for octane and cetana number, pulse NMR, spectrophotometers
of different types, distillation equipment systems, analyzer management systems
and laboratory information management systems, with instrumentation, auxiliaries,
hardware and software.
- All types of Safety and Fire Fighting Equipments, for safety of personnel
and plant and machinery including fire suits, fire monitors, Q.B. bulbs, spray
nozzles, ambient air monitors, heat and flame resistant clothings, portable
extinguishers, deluge skid systems, explosimeters, rupture discs, fire fighting
systems, fire tenders, foam systems with foam storage and monitor, transport
and booms, snorkels, sprinkler systems, breathing air apparatus, fire proofing
materials for passive fire protection of steel structures and oil spill protection
booms, with auxiliaries.
- All types of Communication Equipments, including cables, bone mikes, frequency
synthesizers, meteorological instruments, microwave transmission and receiving
equipments, public address systems, intrinsically safe walkie-talkies, UHF/VHF
multi-channel communication systems, radio telemetry systems, with remote telemetry
units, portable units and PC based master telemetry units and antenna systems.
- Initial charge of all types of catalysts, deslocants, zeolites, activated
carbons, clay molecular sleves, used in refining and processing of petroleum
crude, petroleum products and by-products.
- Software Support Systems, including training simulation systems, electronic
documentation systems, CAD stations, date tapes, operation/maintenance/safety
manuals, scanners, plotters, printers, software including licenses, specifications,
drawings, technical literature, and their
hardware and software.
- Special Maintenance Systems, including hydro-jetting tools, pneumatic torque
wrenches, EOT/mobile cranes, hoists, grinders, high pressure cleaning systems,
induction bending machines, auto welding machines, various welding equipments
like girth welding, vertical flux cord, bottom saw, four-side edge preparation,
angle rolls, rolling and levelling machines, sky climbers, hot tapping machines,
bolt tensioners, high pressure test pumps, tube bundles pullers, tube nippers,
ultrasonic leak detectors, machine condition monitoring systems and associated
sub-assemblies, vibration analysers and computerized alignments systems.
- Sub-assemblies, tools, accessories, protective coating/paint materials,
stores, spares, materials, supplies, consumables for running, repairing or maintenance
of the goods specified in this List.
List 16 (See S. No. 368 of the Table)
- Hot mix plant batch type with electronic controls and bag type filter arrangements
more than 120 T/hour capacity
- Electronic paver finisher (with sensor device) for laying bituminous pavement
7 m size and above
- Slip form/fixed form paverfinisher for laying concrete pavement
- Surface dressing equipment (self propelled) (chips spreader)
- Slurry seal machine for filling up cracks in roads
- Kerb laying machine
- Mobile bridge inspection unit
- Mechanical broom with blower
- Toll collection and traffic control equipment
- Electronic Total station instrument for topographic survey
- Global Positioning System (GPS) Instrument
- Stone crushing (cone type) plants
- Concrete Batching plants 50 cum/hr or more
- Hydraulically operated self propelled piling rig with accessories
- Hydraulically operated rough terrain self propelled 100 tons crane with
telescopic boom
- Hydraulically operated self propelled soil boring equipment with casing
pipes for deep earth anchor
- Mobile concrete pump placer of 90/120 cu m/hr capacity
- Automatic asphalt extraction equipment
- Fully automatic, hydraulically operated, pre-cast segment moulds
- Hydraulic gantry crane of 100 tonnes capacity for launching truss
- Skid steer loaders
- Tunnel Excavation & Lining Equipments consisting of Drilling jumbos, Loaders,
Excavators, Shotcrete machine and 3 stage crushers.
List 17 (See S. No. 372 of the Table)
- Telephonic or telegraphic apparatus of the following description: (a) Switching
apparatus for cellular mobile telephone service (b) Base station controllers
(c) ATM Switches (d) Frame Relay Switches (e) Ethernet Switches
- Apparatus for Carrier Current Line System or Digital Line System of the
following description:- (a) HDSL System (b) Dense Wave Division Multiplexing(DWDM)
System (c) Routers
- Radio communication equipment including VHF, UHF and microwave communication
equipment of the following description:- (a) Base Trans-receivers stations (BTS)
(b) Satellite communication equipment; the following customer premises equipment,
namely:- (i) Radio with LNA, up converters and down converters (ii) Satellite
modems (c) BTS ancillary equipment of the following description,- (i) Cellular
repeaters (ii) Amplifiers (iii) Wave Guides
- Network management stations
- Computers for billing and customer services
- Short message service hardware
- Automatic call distribution system
- Transcoders
- Test equipment Note:- Goods specified against item 1(a) is to be imported
only by Cellular Mobile Telephone Service Licencees and Universal Access Service
Providers
List 18 (See S. No. 373 of the Table)
- Paging control terminal
- Transmitter controller
- Paging transmitter
- Link transmitter/link repeater, monitor receiver
- Link receiver
- N+1 Arbitrators for the above, hot standby panel
- Combiners
- Automatic monitoring system
- Network management & control system
- Integrated ACD/OAP system
- Isolators
- Cavity filters
- Multicouplers
- Directional power sensors
- Communication analysers
- Radio communication test set up, spectrum analyser, field strength meter
- POCSAG or FLEX encoders
- Global positioning system
- Simul cast controller
- Automatic call distribution equipment/system
List 19 (See S. No 374 of Table)
- Controller (Dispatch) of the following description:- (a) Network Controller,
Master Controller (b) Line Conditioner for controller (c) Computer for Network
Management and Control System, System Watch (d) Processor Controller Frame,
Shelves (e) Network Interface Module (f) Voice Tone Module (g) Dispatch Application
Processor (h) Metro Packet Switch (i) Digital Cross Connect Switch (j) Advance
Packet Duplicator (k) Building Integration Timing System
- Telephonic or telegraphic apparatus of the following description, namely;-
Base Station Controllers
- Radio Communication equipment including VHF,UHF and Microwave communication
equipment of the following description, namely:- Base Transreceivers Stations(BTS)
- Trunked Repeaters(multiple repeaters required operations)- (a) Repeaters,350/400/800Mh,
20-100 Watts (b) Line Interface Module (c) Repeater Programming kit and cable
(d) Extender Card, extender cable (e) Repeater Module Packing kit
- Antenna System equipment (a) Tower top pre-amplifier (b) Bi-directional
amplifier
- Voting Equipment (a) Voter Cable (b) Audio Revert Option Kit (c) Receiver
decoder module (d) SMC main site RDM (e) Receiver Voter Module (f) Remote Multiplexer
Module (g) Voter Diagnostic Module (h) RDM Test Cable
(i) Satellite Power Supply (j) Central demix Module (k) Voter Shell Assembly
- Field Programming kit- (a) Radio Interface Box (RIB) (b) RIB to Repeater
Cable
- Computer for billing and customer services
- Short Message Service Hardware
- Automatic Call Distribution System
- Transcoders
- Test equipment
- Mobile Switching Office (MSO)
List 20 (See S. No. 375 of the Table)
- Micromanipulators
- Molecular beam expitaxy system (MBE system)
- Chemical vapour deposition (CVD) system - Low pressure CVD (LP CVD) - Metal
organic CVD (MO CVD)
- High pressure oxidation systems
- Lithography systems
- Direct step on wafers / steppers
- X-ray lithography systems
- E-Beam mask making system
- E-Beam direct write system
- Mask aligners
- Mask inspection systems (comparators)
- Wafer scriber or Wafer slicer or Wafer sawing machine or Wafer fractures
or any combination thereof
- Die bonders or wire bonders or combination thereof
- Wafer sawing machine
- Leak detection system
- Clean room air showers
- Particle monitor / counter both air and liquid borne
- Automatic encapsulation system, Automatic marking / branding machine
- Clean room laminar flow air handling system
- Ultra clean room equipment
- Ultra high purity demineralised water treatment plant
- PVDF welding and orbital welding machines
- Ultra high pure (UHP) gas distribution system
- Toxic gas distribution / monitoring system
- Fourier Transform Infra-red (FTIR) Spectrophotometer for measuring Epitaxy
Thickness, Boron and Phosphorus weight percentage
- Parts of FTIR instrument
- Interferometer and nano- scan meter for measuring deposited metal or oxide
thickness
- Ellipsometer for measurement of refractive thickness, thickness of layers
deposited on semi-
conductor wafer
- De-Oxo purifiers and puridriers and Hydrogen, Nitrogen, Oxygen and Argon
gases
- Hydrogen, Oxygen and Nitrogen gas generators and accessories for producing
high purity process gases for semiconductor wafer/device manufacture
- Automatic lead frame loaders for semiconductor devices
- Mercury probing apparatus and accessories for measuring oxide purity and
carrier concentration of semiconductor wafers
- Parts of mercury probing apparatus
- Fume scrubbers for toxic process gases used in semiconductor industry
- Apparatus for profiling and measurement of the surface including topography
of semiconductor wafers and /or any layers deposited on it.
- Mass Flow Controllers (MFC) and Source Vaporiser for various process gases
used in semiconductor wafer processing
- RF Generator for Epitaxial Reactors heating
- Parts of RF Generator
- Equipment used for quality control namely Burn-in Systems, moisture monitors
and parts thereof
- Tools for Moulding, Cutting, Trimming operations used in the semiconductors
manufacture
- Apparatus for the measurement of dynamic electrical parameters of Semiconductor
wafer devices
- Apparatus for measuring physical parameters of junction in semiconductor
wafter
- Automatic trim and form/die equipment for semiconductor devices
- Electro polished SS pipes, Swagelok fittings, nupro bellows valves, manual
shut-off valves, non-return valves, high purity gas and chemical filters
- Optical pyrometer for measuring infra-red radiated temperature
- Gas Chromatograph/Analyzer for analysing purity of process gases
- Toxic gas monitors and Alarms
- Milli-Volt generator for temperature profiling of diffusion furnace used
in semiconductor industry
- Curve Tracer for measurement of dynamic electrical parameters of semiconductor
wafers/devices
- Apparatus for measurement of life time carriers/Switching time for semiconductor
devices
- Contact Printer for photomask
- Die sheer Tester
- XRP Tester for inspection of the Moulded / Encapsulated devices for finding
out the defects.
- Trace Moisture Analyzer / Dew point analyser for measuring moisture contents
in PPMS
- UV light intensity measurement apparatus in semiconductor manufacture
- Critical Dimension measurement system for Mask making
List 21 (See S. No. 376 of the Table)
- Ferrite parts including memory cores and ferrite magnets
- Switches with contact rating less than 5 amperes at voltage not exceeding
250 Volts AC or DC
- Connectors
- Magnetic -Heads (all types)
- Ceramic / Magnetic cartridges and stylus
- Microphones /Microphone cartridges
- Antennas
- Relays of contact rating upto 7 amperes
- EHT cables
- Level meters/level indicators/ tuning indicators/ peak level meters/ battery
meter/ VC meters / Tape counters
- Tone arms
- Microwave passive parts
- (i) Saw filters (ii) Ceramic filter/trap (iii) Delay lines (iv) CRT socket
(v) Spark gap
- Fibre optics and other optoelectronic parts and devices namely, Couplers,
Attenuators, Connectors, Splicers, Multiplexers and Demultiplexers
- Passive optical parts, namely, Microlens and splitters, Micropositioners,
Optical filters and gratings and Phase plates
- Special purpose optical fibres, namely, polarisation holding fibres, plastic
fibres and large core fibres
- Electron guns
List 22 ( See S.No. 379 of the Table )
- Cell cultivation devices, namely, roller bottle systems and spinner
flasks
- CO2 incubator
- DNA/Oligonucleotides Synthesizers
- Electrophoresis system – (Protein & DNA; 2D)
- ELISA Reader
- ELISA Washer
- Fluorimeters
- Low Temperature Freezers (minus 70 degrees and less)
- Spectrophotometers (including Nuclear Magnetic Resonance Spectrometers);
- Cartridges and membranes for ultra-filtration, micro-filtration, reverse
osmosis, sterile filtration and viral removal
- Cell cultivation devices like roller bottle systems, spinner flasks etc
- Centrifuges-tubular, explosion proof, disk stack
- DNA/Oligonucleotides Synthesizers and DNA Analysers
- Electrophoresis system (protein and DNA; 2D)
- ELISA washer
- Fluorimeter
- LC-MS machines
- Low temperature freezers (minus 70 degree centigrade and less)
- Micro-array equipment including scanners, micro-fluidics station, arrayers,
bio-analysers, micro-array chips and bio-chips
- Proteomic Analysers and proteomic lab Systems
- Flow Cytometer/FACs
- Protein Purification System
- Gel Documentation System
- Enzyme linked immuno SPOT (Elispot) Reader System.
List 23 (See S. No. 379 of the Table)
- UV/Visible spectrophotometer, either with PDA and/or kinetics measurement
and low bandwidth,
- Preparative chromatographic system,
- Chiral columns and other HPLC columns for specific application,
- X-ray diffraction equipment,
- Capillary electrophoresis,
- Robotic sample processing system,
- Particle size analysers, laser diffraction, lights scattering and photocorrelation
spectroscopy types,
- Atomic absorption Spectrophotometer,
- Tensiometer,
- Moisture balance,
- Elemental analyser,
- High Precision Auto titrator,
- TOC Analyser,
- Ion Chromatograph,
- Spectrofluorimeter.Luminescence meter,
- Parenteral particle counting system,
- Particle shape analyser,
- FT-NIR Spectrophotometer,
- FT-Raman Spectrophotometer,
- Spectropolarimeter,
- Adsorption gas apparatus,
- Freezing point apparatus,
- Hot stage microscope,
- Osmometer,
- Porosity analyser,
- Sample preparation instrument,
- Automated sampling devices,
- Surface area analyser,
- Multiple organic synthesizer
- Focussed Microwave oven for ortoanic synthesis,
- Immersion cooling probe for 100 oc,
- High Pressure hydrogenator,
- Gas generators,
- Automated dissolution test apparatus, including robotics,
- Stability chambers conforming to ICH guidelines,
- Rotational visco meter and Rheometer,
- Assembly for lontophoresis studies,
- Ultra filteration equipment,
- Diffusion cell apparatus,
- Densitometer,
- Sustained release apparatus,
- Suppository testing device,
- Zeta potential analyser,
- Ultracentrifuge,
- Inverted microscope with fluorescence microscopy and photographic attachments,
- Transilluminator,
- Moodular protein electrophoresis apparatus (1D/2D),
- Nucleic acid sequencer,
- Imaging densitometer,
- Fast-protein Liquid Chromatography,
- U.V. Crosslinker,
- Probe Sonicator
- Sintillation counters (Y and B),
- CO2 incubator,
- Incubator shakedr for bacterial culture,
- Polymerase chain reaction machine,
- Cell harvestor,
- Speed Vac,
- Hybridizing oven,
- Protein sequencer,
- Confocal microscope,
- Capillary electrophoresis,
- Electroporator,
- Scanning electron microscope,
- Amino acid analyser,
- Peptide synthesizer,
- Phosphor imager,
- Fluorescence activated cell sorter,
- ELISA reader
- Fermenter,
- Spray drier,
- Protein purification set up,
- Stimulator,
- Two channel organ bath (with two channel recorder accessories) (a) Isotonic
transducer (b) Isometric transducer (c) Pressure transducer,
- Plethymsometer,
- Blood pressure monitor,
- Blood pressure manual scanner,
- Auto analyser,
- Biofuge,
- Passive avoidance apparatus with controller,
- Auto stainer,
- Microtome,
- Cell harvestor,
- Tissue embedding machine,
- 4 channel auto track system,
- Blood cell counter,
- Blood flow meter,
- Stereotaxic microscope,
- Microdialysis (pull-push counter),
- Radiotelemetric monitoring system,
- High speed refrigerated research centrifuge,
- pH meter (3 decimal reading),
- Microscope phase contrast,
- Microscope polarizing,
- Vacuum rotary evaporators with digital display and control, different sizes,
- Freeze drier (Lyophilizer),
- Precision pipetting devises,
- Refrigerated bath,
- Low temperature circulatory bath (-33 o C),
- Magnetic stirrer with precision temperature control and digital display,
- Thermostatic blocks (Dry bath) with or without magnetic stirring facility.
LIST 24 (SEE S.NO. 380 of the Table)
- Aminoacid Analyser
- Analytical Balances
- Anemometers
- Anesthesia Equipment
- Atomic Absorption spectrophotometer
- Atomiser
- Attrition Measurement Equipment
- Auto Analyserclinical chemistry.
- Auto lgnition test apparatus.
- Auto radiography equipment
- Auto titrator.
- Automatic cover slipper.
- Automatic slide stainer.
- Automatic tissue processor.
- Ball tube distillation apparatus.
- Basic Glove Boxes.
- Basic Orbital and Horizontal Shakers.
- Biolistic (Gene gun).
- Biological Oxidiser.
- Biopsy punches.
- Blood Cell Counter.
- Blood flow Meter.
- Blood sampling equipments.
- Body composition analysis equipment.
- Bottom Top Dispenser.
- Brookfield viscometer.
- Butane fuel microtorches.
- Cardiac monitors.
- Cell lines.
- Centrifuges and Ultra Centrufuge.
- Chilling incubators.
- Coating Apparatus
- Crusher (tissue).
- Crystal/freezing microtone and Ultramicrotone.
- Densitometer.
- Differential Scanning Calorimeter.
- Digital Boiling point/melting point/Freezing point apparatus.
- Digital Cameras.
- Digital pH meter.
- Digital Stroboscope.
- Digital Temperature.
- Controllers.
- Digital theremometer for recording body temperature of experimental animals.
- Direct insertion probe.
- Disntegration Test Machine.
- Dissolved oxygen Meter.
- Dry ice makers
- Dust generator and measurement apparatus.
- Dyno Mill.
- Dlectronic Top Loading Balance.
- Electrophoresis unit.
- Electroporator.
- Elemental analyser.
- Elisa reader Monoclonal antibody production equipment.
- Encapsulation equipment.
- Flame photometer.
- Flash point apparatus.
- Flask Chromatographic system.
- Fluid Bed Drier lab model.
- focused Microwave overn for organic synthesis.
- Freeze drier.
- Freezing point apparatus.
- Freezing rack for metabolic cages.
- Gas Detectors with masks, cartridges gas monitors.
- Gel Dryer and Gel documentation and analysis system.
- Granulator-laboratory granulator.
- Plant Growth chambers.
- Health monitoring equipment.
- Heart monitors for dogs and higher animals.
- High vacuum pumps.
- High pressure autoclave.
- High pressure hydrogenerator.
- High pressure reactor-Autoclave.
- High speed refrigerated research centrifuge.
- High throughput organic synthesizer, High throughput biological screening
equipment.
- Hybridizing overn
- Image Analyzer and Imaging Densitometer.
- Implantable Plant.
- Incubators.
- Inductive coupling plasma equipment
- Infrared temperature sectos.
- Inhalation chambers with accessories.
- Laser particle size analyzer. Particle shape analyzer, Surface area analyzer.
- Liquid scintillation counter.
- Low Temperature Circulation Bath.
- Micro and Micro soxlet extractors
- Microscope and Microtome blades disposable.
- Reation colorimeter.
- Otoscopes.
- Peristaltic pumps.
- Phototachometer.
- Polorimeter
- Porometer and Porosity analyzer
- Potentiometer.
- Precision vacuum contractor.
- Probe sonicator.
- Protein purification machine.
- Radiodetector, radiommunoassy equipment, Gamma counter for hormonal assay.
- Refractometer and Rotary evaporators.
- Rheometer.
- Rotary microtomes, Rotary evaporators.
- Silverson homogeniser.
- Spectrofluorimeter Luminescence meter.
- Spheriodizer
- Spinning band distillation apparatus.
- Spray drier
- Submersible Magnetic Stirrer.
- Super critical fluid chromatography systems.
- Sustained release apparatus.
- Syringes.
- Tattooing instrument.
- Tintometer.
- Tissue embedder.
- Transilluminator
- Zeta poteltial analyzer
- Ultrasonic cleaners.
- Oscilloscope.
- Ultrafilaration equipment
List 25 (See S. No. 381 of the Table)
- Singeing machine
- Fabric reversing machine
- Yarn drying machine
- Volumetric/Gravimetric measurement liquid chemical station
- Lab dye preparation machine
- Lab infra Red Drying Machine
- Continuous weight reduction machinery through microwave technique
- Kier decatising/continous decatising machine
- Solvent scouring machine
- Blanket Fringing Machine
- Raising/Brushing Machine
- Circular Knitting Machine
- Industrial Sewing machine
- Single needle bed drop feed lockstitch machine
- Single needle lockstitch flat bed machine
- Single needle flat bed drop feed lockstitch machine with speed more than
3500 stitches per minute
- High speed twin needle feed lockstitch machine
- High speed two needle lockstitch machine
- Computerised multineedle lockstitch/chainstitch machine
- Single needle lockstitch machine with built in trimmer
- Blind stitch machine of various models
- Single needle drop feed chainstitch machine
- Two needle chainstitch or lockstitch machine
- Chainstitch overedging machine
- Two or three needle chainstitch machine
- Two thread chainstitch for high speed seaming and banding operation with
gear driven pulled feed/compount feed of speed 3500 stitches per minute and
above.
- Safety stitch machine.
- Power driven flat bed knitting machine
- Computerised flat bed knitting machine
- Power operated flat lock/overlock machine
- Linking machine
- Loop making machine
- Power driven socks knitting/gloves knitting machine.
- Whole garment making machine (knitted)
- Plain stitching machine with more than 3500 stitches per minute
- Computerised plain stitching machine with more than 3500 stitches per minute
- High speed needle feed two needle flat bed industrial sewing machine.
- Sewing machine zig-zag flat bed
- High speed multiple needle sewing machine
- Class feed of the arm industrial sewing machine.
- Button hole sewing machine
- Button stitch sewing machine.
- Elastic inserting machine (on a variety of garments)
- Belt attaching machine
- Zip attaching machine
- Bar tacking machine
- Hemstitch machine
- Smoking machine
- Power driven cloth cutting machine.
- Band knife cutting machine
- Collar turning and blocking machine and cuff turning and blocking machine.
- Cuff press
- New automatic collar turning machine
- Automatic pocket welt sewing machine or Automatic pocket welting machine
- Pocket creasing machine
- Embroidery machine with 10 heads and above
- Computerised embroidery machine
- Printing and curing machine
- Quilting machine
- Snap fasterns fixing machine and/or siwa thereof
- Thread cleaning machine
- Steam Press
- Portable boiler for steam press
- Steam Cabinet
- Vaccum table
- Fusing press
- Dry to Dry cleaning machine
- Stain/spot removing machine/gun
- Automatic 25-needle shirring/smoking machine
- Shirt folding machine
- Form finisher
- Collar contour trimmer
- Spreading machine
- Shoulder pad attaching machine.
- Shrinkage controlling machines for knitting fabrics
- Loopdrivers for tubular knitted fabrics
- Mercerising machines for tubular knitted fabrics
- Singeing machines for tubular fabrics.
- Pile cutting machines for knitted fabrics
- Rotating edging machine for fabric rolls
- Conveyors for garments
- Garment Calendering machine
- Tie making machines
- Labelling machines
- Laying and cutting machines
- Button and Rivet fixing machine and/or dies thereof
- Weft straightening and calendering machine
- Slit Opening Machine
- Lab Yarn dyeing machine
- Lab dyeing machine
- Lab pressing machine
- Automatic cone winding machine with yarn splicer and auto doffing system
- Drawing in machine
- Computer aided design system
- Fully automatic grey fabric inspection machines with roll to roll winding
having microprocessor recorder
- Colour matching computer
- High speed Intersecting Rotary/Chain/Pin Drawing Sets/Gill Boxes
- Rectilinear Combs
- Draw Frame/Roving Frame/Automatic Rubbing Frame/Bobbiners/Finishers, for
use in woollen textile industry
- Ring frames from 60 MM Ring Dia and above, for use in woollen textile industry
- Ring Frames with Siro Sp- inning attachment / Auto Doffers having maximum
75 MM Ring Dia, for use in woollen textile industry
- Shearing, polishing and cropping machines
- Step cleaner
- Flax hackling machine
- Drawing machine for Flax
- Roving machine for Flax
- Wet ring frame for Flax
- Auto winding machine for Flax
- Continuous spinning machines for Viscose Filament Yarn.
- Digital electronic frequency inverters for spinning machines including control
boards
- Finishing oil metering pumps with relevant feed system
- Metering gear pumps for Viscose
- Portable systems for injection of pigments for viscose dope complete with
stirred vessel, metering pumps, instruments and control panel
- Precious metal spinnerettes including distribution plates (pre- spinnerette)
- Spin bath degassinag plant by flash evaporation
- Spin bath backwash filtration system with candle filters
- Continuous dissolving and homogenisisng system for viscose preparation
- Contidisk filters for viscose
- Spinbath heat exchanger in graphite
List 26 (See S.No. 381 of the Table)
- Effluent treatment unit with biopaq reactor, activate sludge process, activated
carbon, ultrafiltration ozonisation facilities
- Combined contipress/decatising machine
- Effluent treatment unit with automatic sensing devices, automatic controlled
chemical dosing, dissolved air floatation (DAF), reverse osmosis, sludge dewatering,
decanters, ultrafilters, vacuum filters to deliver water for reuse.
- Hydraulic Flat Paper Press/continuous Hydraulic Flat paper Press/Rotary
Press
- Fully fashioned high speed knitting machine
- Computerised Pattern maker/ Pattern grading/marker
- Computerised embroidery pattern- making machine with plotter
- High Speed Warping machine with yarn tensioning, pneumatic suction devices
and accessories
- Shuttleless loom (air jet, water jet, rapier and projectile and narrow width
high speed needle)
- Beam knotting machine
- Auto control type humidification plant
- Carding Sets, for use in woollen textile industry.
- Yarn/ Fabric mercerising machine
- Continuous bleaching plant
- Wet fabric spreading and squeezing machine
- Relax drum/conveyer drying machine (i) Drying range (ii) Float dryer (iii)
Loop dryer (iv) Drum dryer (v) Jet dryer (vi) Rapid dryer
- Compacting Machine
- Computer controlled HTHP yarn dyeing machine
- Soft package winders (dye package winders)
- Automatic dye weighing and dispensing system
- Open width Tubular inspection machine
- Fastness testing equipment
- Shrinkage testing equipment
- Indigo dyeing range with/without sizing plant
- Computer colour matching equipment
- High speed computer control padding mangle
- Powder dot coating machine
- Laser engraver or inkjet engraver
- Pre-shrinking range for flat and Knitted goods
- Knit-tubular mercerising or bleaching-cum-mercerising machine
- Auto flame controlled, width controlled singeing machine for flat and Knitted
fabrics
- Milling and scouring machine
- Shearing and Polishing machine
- Kier Decatising/Decatising machine
- Combined Contripress / Decatising machine
- Auto fabric detwister
- Rotary/Flat bed screen printing machine
- Curing/Polymerising machine
- Continuous rope/open width washing machine
- Open width continuous dyeing range
- Soft flow dyeing machine
- Jet dyeing machine
List 27 (see S. No 383 of Table)
- Automatic reeling machinery for reeling of silk consisting of continuous
hot air drier(conveyer type), continuous cocoon boiling machine(conveyer type)
and automatic reeling machine with re-reeling
- Silk weaving and twisting machines consisting of hank-to-bobbin cone winders,
silk doubling machine,and Electronic jacquard weft knitting machine
- Arm dyeing machine for hank degumming dyeing
- Hank dryers (continuous type)
- Silk felt calender
- Clip stenter
- Silk calender
- Silk decasting machine
- Overflow machine for silk fabric dyeing
- Cone-chees degumming and dyeing machine
- Beam dyeing machine for silk fabric
- Semi-automatic screen printing machine
- Loop agers
- Design studio equipment
- Colour kitchen equipment
- Colour matching computer
List 28 (See S.No. 384 of the Table)
- Machinery for coffee plantation sector, namely:-
(i) Coffee grinder intended for industrial use, falling under tariff item 8479
82 00 (ii) Coffee roasting machine intended for industrial use, falling under
tariff item 8516 79 90 (iii) Power weeding machine, falling under tariff item
8433 11 90 (iv) Coffee processing machine (pulping, cleaning, sorting & grading),
falling under sub-heading 8433 60 (v) Sprayer, falling under tariff item 8424
81 00 ;
(vi) Coffee packaging machines falling under tariff item 84223000;
(vii) Coffee bagging machine falling under tariff item 84223000;
(viii) Mechanical harvester falling under tariff item 84335900.
List 29 (See S.No.390 of the Table)
- Air blast dust removing machine
- All types of staking machines except slocum (slow combing process)
- Automatic Drying machine
- Automatic Lacing machine
- Automatic Leather Perforating and/or Punching machine
- Automatic Lock-Stitching Cylinder Bed Bartacker
- Automatic machine to control, to slant and to glue leather straps
- Automatic Milling machine
- Automatic Milling-Boring Machine
- Automatic or semi-automatic hydraulic press (750 tonnes or more)
- Automatic Padding machine
- Automatic Spraying machine
- Automatic Tacks - Reinforce machine
- Automatic Work Unit for assembling the complete Insole
- Back Part Moulding machine
- Band-saw with or without Flier
- Bandknife Splitting machine
- Belt Punching and cutting machine
- Bobbin machine with counter
- Boot leg ironing machine
- Bottom Leather Grain Crack Tester
- Bottom roughing and/or scouring machine
- Box Stamping machine
- Buckle Stappling machine
- Button Hole (Eyelets end) machine
- Button Sewing machine
- Button stitch / Sewing machine
- Cementing machine
- Cementing machine and cementing gun
- Chain Slotting machine
- Channel Closing machine
- Channelling and Grooving machine
- Clicking Board levelling machine
- Clicking machine
- Clicking Machine Hydraulic (Bottom)
- Coloriemeter
- Column Boring machine
- Computerised Sewing Machine
- Computerised Skiving machine
- Conveyor system
- Counter Cementing Machine
- Counter Moulding machine
- Counter Tightening machine
- Coupling and edge pre- trimming machine
- Crimping machine
- Crumpling and embossing machine
- Curtain coating machine
- Cylinder Bed Sewing machine
- Die Bending machine
- Double Band Cleaning machine
- Dust removing machine- pneumatic/hydraulic
- Dyeing machine
- Edge buffing machine
- Edge Inking machine
- Edge Pre-Trimming machine
- Edge Setting machine
- Edge Trimming machine
- Elastic inserting machine on variety of garments
- Electrical machine for cutting and slanting straps
- Electro pneumatic weaving machine for leather
- Electronic skin assessor
- Embossing Plates for Press for leather printing
- Engraved rollers for Press for leather printing
- Evening and Roughing machine for Soles and Insolses
- Fibre Board Flexing machine
- Fine Turn machines for Lasts
- Finish Sheet Resistance Tester
- Finishing Machine for Lasts
- Fixed Head/Travailing Head Clicking Cutting machine
- Flat Bed Double Needle Sewing machine
- Flat Bed Single Needle Industrial Sewing machine with or without trimer
- Folding machine for brief cases and other leather products
- Folding machine for sides for Brief Case
- Forepart conditioning machine
- Frame Fixing/Frame Folding machine
- Fusing presses
- Halogen and Adhesive Application machine
- Hand Operated Press for Inserting Perforation Tubes and Prickers
- Heat Setting plant
- Heat transfer press
- Heel and Sole Brushing machine
- Heel and Sole Buffing machine
- Heel Attaching machine
- Heel Breast Cementing machine
- Heel breast roughing machine
- Heel Breasting machine
- Heel Building machine
- Heel Covering machine
- Heel Molder Flanger
- Heel Nailing machine
- Heel profiling machine
- Heel seat and side lasting machines
- Heel Seat Cement Lasting machine
- Heel Trimming / pretrimming / Cupping or combined machine
- High Speed Corner Stitching machine
- Hole punching machine
- Hot Melt Applicators
- Humidifier for Uppers
- Hydraulic / Pneumatic sammying and /or setting machine
- Hydraulic automatic plating ironing machine
- Hydraulic Bending machine
- Hydraulic Fleshing machine
- Hydraulic Ironing and Embossing Press
- Hydraulic Scudding machine
- Hydraulic Setting machine
- Hydraulic Shaving machine
- Hydraulic Shearing machine
- Hydraulic Splitting machine
- Hydraulic Sulphide applicator
- Injection Moulding of PVR/TPR/EVA Soles, Inserts and Half Soles
- Injection Moulding press to produce Plastic shoe Lasts
- Insole Attaching machine
- Insole Backpart Stiffener Tester
- Insole Bevelling machine
- Insole Covering machine
- Insole moulding machine
- Ironing and Conditioning machine
- Kamborian Lasting machine
- Knife Grinding machine
- Knife making equipment for cold steel and forged steel
- Label stitching machine
- Last Turning machine
- Lastometer
- Leather buffing machine
- Leather cover cutting machine for Heels
- Leather Polishing machine
- Leather rolling machine
- Lining roughing machine
- Lining Trimming machine
- Loop closing machine
- Loose / Nailing machine
- Manual loop cutter
- Mckay Stitching machine
- Milling machine for shoe Uppers
- Moccasin Lining Trimming machine
- Moccasin Performing machine
- Motorised hides and skins stamping machine
- Moulds for rubber sole direct vulcanising press and PVC direct injection
soling machine
- Multiple Row Upper Chain Stitching machine i.e. 3 Rows and above
- Three Needles for Small Arm Cylinder machine for Multiple Row Stitching
- Outsole Stitching machine
- Paste drying unit
- Pattern binding machine
- Pattern corner cuting and binding machine
- Pattern Grading machine
- Pattern making machine
- Pattern Perforator
- Pattern Plan
- Pattern scanner
- Pattern Scanning machine
- Piping machine for trimming and embelishment fixing machine
- Plan Computer Controlled Nesting System
- Pneumatic Broaching machine
- Pneumatic control moulder machine for buckles
- Pneumatic fusing machine for ironing fusible interlining
- Polishing machine
- Polyshanking machine
- Polyurethane / PVC / TPR Sole, Insole, Heel, Heel Tip Injection Moulding
machine (single or multiple station)
- Pore part lasting machine
- Post Bed Double Needle Sewing machine
- Post Bed Single Needle Sewing machine
- Post Bed Single Needle under Edge Trimming
- Pounding or beating or ironing machine or combination of such machines
- Pre-lasting conditioner
- Preparing and polishing machine
- Pulling Over and Cement Lasting machine
- Pulling Over Machine
- Punches for model room
- Punches of all varieties
- Punching and / or eyeletting machine
- PVR/TU/EVA direct injection soling machine (DIP construction)
- Quilting machine
- Raised Cord Sewing machine
- Reactivating Plant for Shoe and Soles
- Recessing and Roughing Soles machine
- Recessing Welt machine
- Rotary Collection Unit
- Rotary Pigment Coating machine
- Rotary Printing machine
- Rough Turn machine for lasts
- Roughing machine for Plastic Blocks
- Roughing machinery for upper or soles or insoles
- Rubber sole direct vulcanising press (DVP construction)
- Satra Plan and Knife search
- Scissors Cutting machine for plate
- Scouring and Blending machine
- Screwing machine
- Seam Ironing machine
- Sectioning machine
- Sewing machine Cylinder Bed
- Sewing Machine for Ruffled Work and Genuine Mocassin
- Sewing Machine Zig Zag Flat Bed
- Shank / Sole / Counter reducing machine
- Shank Rivetting machine
- Shears for cutting pattern
- Shears for Iron Bars
- Side Lasting machine
- Sidewall Roughing machine
- Skiving machine
- Slike Fastener Fatigue Tester
- Snap fasteners fixing machine with or without dies therefor
- Sole / Heel / Seat Roughing machine
- Sole Edge Recessing / Shapping machine
- Sole Levelling machine
- Sole Stamping / Embossing machine
- Soling Material Abrasion machine
- Spiral Cutting machine/ Cutting Press
- Spray Booths
- Stamping machine for Upper / Lining / Socks
- Steam Toe Press
- Stich Marking machine
- Strap / Strip Cutting machine
- Strap Folding machine
- Stretching and drying machine with or without conveyor and toggles
- String Lasting machine
- Strobel type stitching machine
- Studs Attaching machine
- Suit Case Stitching machine
- Tack heel seat lasting machine
- Tack Lasting machine
- Tack Side lasting machine
- Tanning and colouring drums
- Tapping and seam rubbing machine
- Testing Equipments, namely :- Flexometer / Upper material flexing machine,
Tensometer / Lastometer, Permeometer / Upper leather water proofness tester,
Penetrometer / Bottom Leather water penetration machine, Finish rub fastness
tester, Upper leather abrasion resistance machine, Dome plasticity apparatus,
Finish fleat resistance tester, Adhesion of finish tester,
Leather shrinkage temperature determination apparatus, Wrinklometer, Bottom
Leather grain crack tester, Electronic moisture meter, Dyeing and fumbling machine
for laboratory, fibre board flexing machine, State of cure apparatus, Ross Flexing
machines, Soling materials abrasion machine, Heel fatigue tester, Heel impact
tester, Centilever tensiometer, Viewing box for assessing visible damage, Slide
fastener fatigue tester, Insole backparts stiffness tester, shoe flexing machine,
Break / pipness scale, Sole Adhesion tester, Safety Footwear impact tester,
Rapid tear tester, Needle holding jig, Shoe lace adhesion machine
- Thermo cementing and folding machine
- Toe Cap Applicator Thermoplastic
- Top Lift Slugging machine
- Transfer Arm
- Trimming/milling machine with or without polishing device
- Twin Needle, needle feedlock stitch sewing machine
- Twin Sole Attaching machine
- Two Needle Lock Stitching machine
- Unlasting machine
- Upper Cementing machine
- Upper Edge Inking machine
- Upper Embossing machine
- Upper Folding machine
- Upper Forming machine
- Upper Perforating machine
- Upper Reinforcing machine
- Upper Seam Rubbing / Beating machine
- Vaccum Drying machine
- Vaccum forming machine for last with vaccum pump
- Vice for holding pattern
- Vision Lasting System for Toe Lasting machine
- Vulcanizing Press
- Welt (Rand) Attaching machine
- Aquamix for use in Tanning industry
- Prodomix for use in Tanning industry
- Microtan / Computan for use in Tanning industry
- Pneumatic press for engraving and marking
- Pneumatic staple gun for stapling insoles, heels and uppers
- Stapling machine for lows to upper on leather shoes
- Lighting assessment cabinet (for checking colour under different light conditions)
- CAD/CAM equipment for shoe desgining and pattern engineering including software
- Bistep cutting machine
- Spiking machine
- Airhood with grinder
- Sock liner press
- Box folding machine
- Outsole plates
- Dust collector systems
- Shoe box making machine
- Splitting machine (fitted with electronic and computer devices,etc.)
- Moulds for footwear
- Colouring/painting machines for soles and heels
- High frequency welding/cutting machines for uppers and insoles
- Degreasing/ cleaning machine for polyurethane soles
- Strap fitting machine
- R P box strapping machine
- Dies for canvas shoes
- Dies for soles and straps for footwear
List 30 ( See S.No.413 of the Table)
- Scramblers
- Descramblers
- Encoders
- Decoders
- Jammers
- Network firewalls
- Network sniffers, scanners and monitoring systems
- Probes for data monitoring
- SMS and MMS monitoring systems
List 31 (See S. No.416 of the Table)
(A) Wireless Apparatus and accessories –
- HF, VHF, or UHF trans-receiver (combination of transmitter and receiver)
meant for amateur frequencies with accessories in assembled or kit form
- VHF/VHF or VHF/UHF Repeater (combination of transmitter and receiver) meant
for amateur frequencies with accessories in assembled or kit form
- Transvertor for amateur frequencies in assembled or kit form
- Grid Dip Oscillator, Radio Frequency Interference Filter, Balun Transformer,
SWR bridge or reflectometer, Morse reader or Noise bridge
- Antenna with or without feeders/Antenna rotators for amateur frequencies
- Digital Frequency counter (upto 600 MHz) with accessories
(B) Parts –
- Transistors, diodes, integrated circuits/ chips, thermionic valves or vaccum
tubes
- Toroidal cores, quartz crystals, relays, rotatory switches, ferrite beads
- Variable condensers, air- dielectric type
- Precision capacitors (fixed type) value (s) between 1pF to 5000 pF
- Spare nicad cells or pack, as required or used with thermionic valves or
vaccum tubes or toroidal cores (in the case of hand held transreceiver)
- Slow motion tuning mechanism with or without dials.
List 32 (See S. No. 488 of the Table)
- (A) Braille writers and braille writing instruments
- Hand writing equipment Braille Frames, Slates, Writing Guides, Script Writing
Guides, Styli, Braille Erasers
- Canes, Electronic aids like the Sonic Guide
- Optical, Environmental Sensors
- Arithmetic aids like the Taylor Frame (arithmetic and algebra types), Cubarythm,
Speaking or Braille calculator
- Geometrical aids like combined Graph and Mathematical Demonstration Board,
Braille Protractors, Scales, Compasses and Spar Wheels
- Electronic measuring equipment, such as calipers, micrometers, comparators,
gauges, gauge blocks Levels, Rules, Rulers and Yardsticks
- Drafting, Drawing aids, tactile displays
- Specially adapted clocks and watches
- (B) Orthopaedic appliances falling under heading No.90.21 of the First
Schedule
- Wheel chairs falling under heading No. 87.13 of the First Schedule
- (C) Artificial electronic larynx and spares thereof
- (D) Artificial electronic ear (Cochlear implant)
- (E) Talking books (in the form of cassettes, discs or other sound reproductions)
and large-print books, braille embossers, talking calculators, talking thermometers
- Equipment for the mechanical or the computerized production of braille and
recorded material such as braille computer terminals and displays, electronic
braille, transfer and pressing machines and stereo typing machines
- Braille paper for the production of braille books
- All tangible appliances including articles, instruments, apparatus, specially
designed for use by the blind
- Aids for improving mobility of the blind such as electronic orientation
and obstacle detection appliance and white canes
- Technical aids for education, rehabilitation, vocational training and employment
of the blind such as braille typewriters, braille watches, teaching and learning
aids, games and other instruments and vocational aids specifically adapted for
use of the blind
- Assistive listening devices, audiometers
- External catheters, special jelly cushions to prevent bed sores, stair lift,
urine collection bags
- Instruments and implants for severely physically handicapped patients and
joints replacement and spinal instruments and implants including bone cement
List 33 (See S. No. 511 of the Table)
- Tarapur Atomic Power Plants –3 and 4 (Maharashtra) – 1000 MW
- Kudankulam (Tamil Nadu) – 2000 MW
- Kaiga – 3 and 4 (Karnataka) – 440 MW
- Rajasthan Atomic Power Project- Units 5 and 6 (Rawatbhata) - 440 MW, Units
-7 and 8 (Rawatbhata) of 1400MWe
- Prototype Fast Breeder Reactor (Kalpakkam) –500 MW.
- Kakrapar Atomic Power Project-Units 3 and 4 (Kakrapar) of 1400 MWe.
(Sanjeev Kumar Singh)
Under Secretary to the Government of India
[F.No. 334/1/2012-TRU]
|