| Hs Code |
Description |
UK Hs Code - 3901 : PLASTICS AND ARTICLES THEREOF
|
| 3901000000 |
I. PRIMARY FORMS |
| 3901000000 |
Polymers of ethylene, in primary forms |
| 3901100000 |
Polyethylene having a specific gravity of less than 0,94 |
| 3901101000 |
Linear polyethylene |
| 3901101010 |
Linear polyethylene, of a specific gravity of 0,928 or more but not exceeding 0,935 and of a melt flow index of less than 0,6|g/min, for the manufacture of shrinkmelt binder fibres |
| 3901101090 |
Other |
| 3901109000 |
Other |
| 3901109010 |
Polyethylene containing by weight 0,25|% or more of carbonyl groups in the chain, in pellet form |
| 3901109010 |
Polyethylene for the manufacture of photo-resist film for semiconductors or printed circuits |
| 3901109020 |
Polyethylene, in the form of granules, of a specific gravity of 0,925 (+/-|0,0015), a melt flow index of 0,3|g/10|min (+/-|0,05|g/10|min), for the manufacture of blown films of a Haze value not exceeding 6|% and an elongation at break (MD/TD) of 210/340 |
| 3901109030 |
Polyethylene, in the form of granules, containing by weight 15|% or more of copper, for the purpose of protecting against static charge build up and corrosion |
| 3901109090 |
Other |
| 3901109090 |
Other |
| 3901200000 |
Polyethylene having a specific gravity of 0,94 or more |
| 3901200010 |
Polyethylene, in one of the forms mentioned in note 6|(b) to Chapter 39, of a specific gravity of 0,945 or more but not exceeding 0,985, for the manufacture of films for typewriter ribbon or similar ribbon |
| 3901200020 |
Polyethylene, containing by weight 35|% or more but not more than 45|% of mica |
| 3901200090 |
Other |
| 3901201000 |
Other |
| 3901209010 |
Polyethylene, in one of the forms mentioned in note 6|(b) to Chapter 39, of a specific gravity of 0,945 or more but not exceeding 0,985, for the manufacture of films for typewriter ribbon or similar ribbon |
| 3901209020 |
Polyethylene, containing by weight 35|% or more but not more than 45|% of mica |
| 3901209090 |
Other |
| 3901300000 |
Ethylene-vinyl acetate copolymers |
| 3901300010 |
For cavity filling, for use in certain types of aircraft |
| 3901300090 |
Other |
| 3901900000 |
Other |
| 3901900010 |
For cavity filling, for use in certain types of aircraft |
| 3901900092 |
Other |
| 3901900092 |
Ionomer resin consisting of a salt of a copolymer of ethylene with methacrylic acid |
| 3901900093 |
Ionomer resin consisting of a salt of a terpolymer of ethylene, isobutyl acrylate, and methacrylic acid |
| 3901900094 |
An A-B-A block copolymer of polystyrene, ethylene-butylene copolymer and polystyrene, containing by weight not more than|35% of styrene, in one of the forms mentioned in note|6|b) to this Chapter |
| 3901900094 |
Chlorosulphonated polythylene |
| 3901900095 |
Copolymer of ethylene with acrylic acid or with methacrylic acid, containing by weight|16% or more but not more than|30% of acrylic acid or methacrylic acid, in one of the forms mentioned in note|6|(b) to this Chapter |
| 3901900095 |
A-B-A-Block copolymer of polystyrene, ethylene-butylene copolymer and polystyrene, containing by weight 35% or less of styrene, in one of the forms mentioned in note 6b) to this chapter |
| 3901900096 |
Copolymer of ethylene with methyl acrylate containing not less than 16% and not more than 20% by weight of methyl acrylate, in one of the forms mentioned in Note 6 b) to this Chapter |
| 3901900097 |
Copolymers of ethylene and methacrylic acid, containing from 8% to 12% by weight of methacrylic acid, put up in one of the forms referred to in Note 6(b) to this Chapter, for the manufacture of ionomers |
| 3901900097 |
Copolymer of ethylene, vinyl acetate and carbon monoxide, for use as a plasticizer in the manufacture of roof sheets |
| 3901900098 |
Copolymer of ethylene with acrylic acid and methyl acrylate, containing by weight 60% or more of ethylene, in one of the forms mentioned in note 6 (b) to this Chapter |
| 3901900099 |
Other |
| 3901901000 |
Ionomer resin consisting of a salt of a terpolymer of ethylene with isobutyl acrylate and methacrylic acid |
| 3901902000 |
A-B-A block copolymer of polystyrene, ethylene-butylene copolymer and polystyrene, containing by weight 35|% or less of styrene, in one of the forms mentioned in note 6(b) to this chapter |
| 3901909000 |
Other |
| 3901909010 |
For cavity filling, for use in certain types of aircraft |
| 3901909081 |
Other |
| 3901909081 |
Copolymer of ethylene and propylene, modified with maleic anhydride, containing by weight more than 55|% of ethylene and not more than 3|% of maleic anhydride |
| 3901909082 |
Polyethylene modified with maleic anhydride, containing by weight not more than 4|% of maleic anhydride, for use in the manufacture of fuel tanks for motor vehicles |
| 3901909091 |
Other |
| 3901909091 |
Other |
| 3901909091 |
Ionomer resin consisting of a salt of a copolymer of ethylene with methacrylic acid |
| 3901909092 |
Chlorosulphonated polythylene |
| 3901909093 |
Copolymer of ethylene, vinyl acetate and carbon monoxide, for use as a plasticizer in the manufacture of roof sheets |
| 3901909094 |
Mixtures of A-B block copolymer of polystyrene and ethylene-butylene copolymer and A-B-A block copolymer of polystyrene, ethylene-butylene copolymer and polystyrene, containing by weight not more than 35|% of styrene |
| 3901909095 |
Copolymer of ethylene and butylene, having hydroxyl or acrylate end-groups, containing by weight 40|% or more but not more than 60|% of butylene |
| 3901909096 |
Linear A-B block copolymer of polyisoprene, whether or not epoxidized, and either ethylene-butylene copolymer or styrene-ethylene-butylene copolymer, having hydroxyl end-groups |
| 3901909097 |
Copolymer of ethylene and octene, containing by weight 5|% or more but not more than 15|% of octene, of a specific gravity of less than 0,93 and a melt index of 0,80 or more but not exceeding 0,95 |
| 3901909097 |
Chlorinated polyethylene, in the form of powder |
| 3901909099 |
Other |
UK Hs Code - 3902 : Polymers of propylene or of other olefins, in primary forms
|
| 3902100000 |
Polypropylene |
| 3902100010 |
Polypropylene containing no plasticizer and not more than: 7|mg/kg of aluminium, 2|mg/kg of iron, 1|mg/kg of magnesium, 8|mg/kg of chloride |
| 3902100030 |
Polypropylene, containing not more than 1|mg/kg of aluminium, 0,05|mg/kg of iron, 1|mg/kg of magnesium and 1|mg/kg of chloride, for use in the manufacture of packaging for disposable contact lenses |
| 3902100090 |
Other |
| 3902200000 |
Polyisobutylene |
| 3902200010 |
Polyisobutylene, of a number average molecular weight (Mn) of 700 or more but not more than 800 |
| 3902200020 |
Hydrogenated polyisobutene, in liquid form |
| 3902200090 |
Other |
| 3902300000 |
Propylene copolymers |
| 3902300010 |
For cavity filling, for use in certain types of aircraft |
| 3902300090 |
Other |
| 3902300091 |
Other |
| 3902300091 |
A-B Block copolymer of polystyrene and an ethylene-propylene copolymer, containing by weight 40|% or less of styrene, in one of the forms mentioned in note 6|(b) to Chapter 39 |
| 3902300092 |
Copolymer of propylene, butylene and ethylene, containing by weight more than 65|% but less than 80|% of propylene and not less than 20|% of butylene |
| 3902300094 |
Chlorinated polypropylene, chemically modified with maleic anhydride, containing by weight 23|% or more but not more than 26|% of chlorine and less than 5|% of epoxy resin |
| 3902300099 |
Other |
| 3902900000 |
Other |
| 3902900010 |
For cavity filling, for use in certain types of aircraft |
| 3902900091 |
Other |
| 3902900091 |
An A-B-A block copolymer of polystyrene, ethylene-butylene copolymer and polystyrene, containing by weight not more than|35% of styrene, in one of the forms mentioned in note 6 (b) to this Chapter |
| 3902900092 |
Polymers of 4-methylpent-1-ene |
| 3902900093 |
Poly(1-ethylethylene)(polybutene-1) in one of the forms mentioned in Note 6 (b) to this Chapter |
| 3902900094 |
Poly-alpha-olefin having a kinetic viscosity of around 4 centistokes (4mm2/S) at - 40!o! C measured using the ASTM D 45 method and having a flash point of not lower than 205!o! C measured using the ASTM D 92 method |
| 3902900095 |
Synthetic poly-alpha-olefin having a kinetic viscosity of not less than|38|!x!|10$-$6m$2s$-$1 (38 centistokes) at|100 |C measured using the ASTM|D|445 method |
| 3902900097 |
A-B Block copolymer of polystyrene and an ethylene-propylene copolymer, containing by weight 40|% or less of styrene, in one of the forms mentioned in note 6|(b) to Chapter 39 |
| 3902900099 |
Other |
| 3902901000 |
A-B-A block copolymer of polystyrene, ethylene-butylene copolymer and polystyrene, containing by weight 35 % or less of styrene, in one of the forms mentioned in note 6(b) to this chapter |
| 3902909000 |
Other |
| 3902909010 |
For cavity filling, for use in certain types of aircraft |
| 3902909052 |
Other |
| 3902909052 |
Amorphous poly-alpha-olefin copolymer blend of poly(propylene-co-1-butene) and petroleum hydrocarbon resin |
| 3902909055 |
Thermoplastic elastomer, with an A-B-A block copolymer structure of polystyrene, polyisobutylene and polystyrene containing by weight 10 % or more but not more than 35 % of polystyrene |
| 3902909092 |
Other |
| 3902909092 |
Polymers of 4-methylpent-1-ene |
| 3902909093 |
Synthetic poly-alpha-olefin having a viscosity of at least |38|!x!|10$-$6m$2s$-$1 (38 centistokes) at|100!o!C measured using the ASTM|D|445 method |
| 3902909094 |
Modified, chlorinated polyolefins, whether or not in a solution or dispersion |
| 3902909095 |
Copolymer of ethylene and butylene, having hydroxyl or acrylate end-groups, containing by weight 40|% or more but not more than 60|% of butylene |
| 3902909096 |
Linear A-B block copolymer of polyisoprene, whether or not epoxidized, and either ethylene-butylene copolymer or styrene-ethylene-butylene copolymer, having hydroxyl end-groups |
| 3902909097 |
Hydrogenated polyisobutene, in liquid form |
| 3902909099 |
Other |
UK Hs Code - 3903 : Polymers of styrene, in primary forms
|
| 3903110000 |
Polystyrene |
| 3903110000 |
Expansible |
| 3903110010 |
White expandable polystyrene beads with a thermal conductivity of not more than 0.034|W/mK at a density of 14.0|kg/m$3|(±|1,5|kg/m$3), containing 50|% recycled material |
| 3903110090 |
Other |
| 3903190000 |
Other |
| 3903190020 |
Polystyrene of a molecular weight (M@n) not exceeding 5|000 |
| 3903190030 |
Crystalline polystyrene with a melting point of 268 °C or more but not more than 272 °C and a setting point of 232 °C or more but not more than 242 °C, whether or not containing additives and filling material |
| 3903190090 |
Other |
| 3903200000 |
Styrene-acrylonitrile (SAN) copolymers |
| 3903300000 |
Acrylonitrile-butadiene-styrene (ABS) copolymers |
| 3903900000 |
Other |
| 3903900010 |
Copolymers, solely of allyl alcohol with styrene, which have an acetyl value of not less than 175 |
| 3903900030 |
Brominated polystyrene, containing by weight|58% or more but not more than|71% of bromine, in one of the forms mentioned in note|6(b) to this Chapter |
| 3903900040 |
Copolymer of dibrosmostyrene with acrylonitrile, butadiene and styrene, containing by weight 20% or more but not more than 35% of dibromostyrene |
| 3903900040 |
Copolymer of styrene with 2-ethylhexyl acrylate or with n-butyl acrylate, containing:- 10 mole|% or more but not more than 16 mole|% of acrylate,- 0,2|mg/kg or less of sodium
and- 0,1|mg/kg or less of calcium |
| 3903900050 |
Block copolymer of styrene and vinyl acetate, containing by weight 5|% or more but not more than 55|% of vinyl acetate |
| 3903900060 |
A-B Block copolymer of polystyrene and an ethylene-propylene copolymer, containing by weight 40|% or less of styrene, in one of the forms mentioned in note 6|(b) to Chapter 39 |
| 3903900070 |
Copolymer of styrene, butyl acrylate and acrylic acid, containing by weight 92|(+/-|1)|% of styrene, 7|(+/-|1)|% of butyl acrylate and 1|(+/-|0,5)|% of acrylic acid |
| 3903900080 |
Copolymer of ?-methylstyrene and styrene, having a softening point exceeding 113|ºC |
| 3903900090 |
Other |
| 3903901000 |
Copolymer, solely of styrene with allyl alcohol, of an acetyl value of 175 or more |
| 3903902000 |
Brominated polystyrene, containing by weight 58 % or more but not more than 71 % of bromine, in one of the forms mentioned in note 6(b) to this chapter |
| 3903909000 |
Other |
| 3903909020 |
Copolymer of styrene with 2-ethylhexyl acrylate or with _n_-butyl acrylate, containing: 10 mole|% or more but not more than 16 mole|% of acrylate, 0,2|mg/kg or less of sodium
and 0,1|mg/kg or less of calcium |
| 3903909025 |
A-B Block copolymer of polystyrene and an ethylene-propylene copolymer, containing by weight 40|% or less of styrene, in one of the forms mentioned in note 6|(b) to Chapter 39 |
| 3903909030 |
Copolymer of styrene, butyl acrylate and acrylic acid, containing by weight 92|(+/-|1)|% of styrene, 7|(+/-|1)|% of butyl acrylate and 1|(+/-|0,5)|% of acrylic acid |
| 3903909035 |
Copolymer of _?_-methylstyrene and styrene, having a softening point exceeding 113|ºC |
| 3903909040 |
Copolymer of styrene with ?-methylstyrene and acrylic acid, of a number average molecular weight (Mn) of 500 or more but not more than 6 000 |
| 3903909045 |
Bimodal copolymer of styrene and butyl acrylate |
| 3903909050 |
Linear A-B block copolymer of polyisoprene, whether or not epoxidized, and either ethylene-butylene copolymer or styrene-ethylene-butylene copolymer, having hydroxyl end-groups |
| 3903909055 |
Copolymer of styrene, methyl methacrylate, butyl acrylate and either acrylic acid or hydroxyethyl methacrylate, of a molecular weight (M@n) of 500 or more but not exceeding 6|000 |
| 3903909060 |
Copolymer of styrene with butyl acrylate, butyl methacrylate and methyl methacrylate, of an average molecular weight of 180|000 or more but not exceeding 240|000, in one of the forms mentioned in note 6 (b) of Chapter 39 |
| 3903909070 |
Ammonium polystyrenesulfonate, in the form of an aqueous solution |
| 3903909075 |
Copolymer of styrene and vinyl pyrrolidone, containing by weight not more than 1|% of sodium dodecyl sulfate, in the form of an aqueous emulsion, for the manufacture of goods of subheading 3305|20|00 or of hair dyes of subheading 3305|90|90 |
| 3903909080 |
Granules of copolymer of styrene and divinylbenzene a minimum diameter of 150|?m and a maximum 800|?m and containing by weight :|minimum 65|% styrene,|maximum 25|% divinylbenzene
for use in the manufacture of ion exchange resins |
| 3903909085 |
Copolymer of styrene, butadiene and methyl methacrylate with a notched impact resistance of 106|J/m or more (as determined by the ASTM D256|method) |
| 3903909086 |
Mixture containing by weight:|45|% or more but not more than 65|% of polymers of styrene|35|% or more but not more than 45|% of poly(phenylene ether)|not more than 10|% of other additives |
| 3903909090 |
Other |
UK Hs Code - 3904 : Polymers of vinyl chloride or of other halogenated olefins, in primary forms
|
| 3904100000 |
Poly(vinyl chloride), not mixed with any other substances |
| 3904100010 |
In the form of granules, for use in certain types of aircraft |
| 3904100090 |
Other |
| 3904210000 |
Other poly(vinyl chloride) |
| 3904210000 |
Non-plasticised |
| 3904210010 |
In the form of granules, for use in certain types of aircraft |
| 3904210090 |
Other |
| 3904220000 |
Plasticised |
| 3904220010 |
In the form of granules, for use in certain types of aircraft |
| 3904220090 |
Other |
| 3904220090 |
Other |
| 3904220091 |
Other |
| 3904220091 |
Poly(vinyl chloride), dyed in the mass, in the form of flakes, grains, pebbles or rectangular chips, for use as decorative elements in floor and wall coverings |
| 3904220099 |
Other |
| 3904300000 |
Vinyl chloride-vinyl acetate copolymers |
| 3904300090 |
Other |
| 3904300090 |
Other |
| 3904400000 |
Other vinyl chloride copolymers |
| 3904400010 |
For cavity filling, for use in certain types of aircraft |
| 3904400091 |
Other |
| 3904400093 |
Copolymer of vinyl chloride and methyl acrylate, containing by weight (80|+/-|1)|% of vinyl chloride and (20|+/-|1)|% of methyl acrylate, in the form of a aqueous emulsion |
| 3904400099 |
Other |
| 3904500000 |
Vinylidene chloride polymers |
| 3904500010 |
For cavity filling, for use in certain types of aircraft |
| 3904500091 |
Other |
| 3904500091 |
Copolymer of vinylidene chloride with acrylonitrile, in the form of expansible beads of a diameter of|4|micrometres or more but not more than|20|micrometres |
| 3904500092 |
Copolymer of vinylidene chloride with vinyl chloride, containing by weight 79,5|% or more of vinylidene chloride, in one of the forms mentioned in note 6 (a) or (b) to Chapter 39, for the manufacture of fibres, monofilament or strip |
| 3904500099 |
Other |
| 3904501000 |
Copolymer of vinylidene chloride with acrylonitrile, in the form of expansible beads of a diameter of 4 micrometres or more but not more than 20 micrometres |
| 3904509000 |
Other |
| 3904509010 |
For cavity filling, for use in certain types of aircraft |
| 3904509090 |
Other |
| 3904509091 |
Other |
| 3904509091 |
Copolymer of vinylidene chloride with vinyl chloride, containing by weight 79,5|% or more of vinylidene chloride, in one of the forms mentioned in note 6 (a) or (b) to Chapter 39, for the manufacture of fibres, monofilament or strip |
| 3904509092 |
Other |
| 3904509092 |
Vinylidene-chloride methacrylate co-polymer for use in the manufacture of monofilaments |
| 3904509099 |
Other |
| 3904509099 |
Other |
| 3904610000 |
Fluoropolymers |
| 3904610000 |
Polytetrafluoroethylene |
| 3904610010 |
Mixture of polytetrafluoroethylene and mica, in one of the forms mentioned in note 6 (b) to Chapter 39 |
| 3904610020 |
Copolymer of tetrafluoroethylene and trifluoro(heptafluoropropoxy)ethylene, containing 3,2|% or more but not more than 4,6|% by weight of trifluoro(heptafluoropropoxy)ethylene and less than 1|mg/kg of extractable fluoride ions |
| 3904610030 |
Polytetrafluoroethylene, in the form of powder, of a specific surface of 8|m$2/g or more but not exceeding 12|m$2/g, a particle size distribution of 10|% of less than 10|?m and 90|% of less than 35|?m and an average particle size of 20|?m |
| 3904610060 |
Mixture of polytetrafluoroethylene (PTFE), sodium chloride and a nonionic surfactant |
| 3904610090 |
Other |
| 3904611000 |
For the manufacture of pharmaceutical products |
| 3904619000 |
Other |
| 3904619010 |
Mixture of polytetrafluoroethylene and mica, in one of the forms mentioned in note 6 (b) to Chapter 39 |
| 3904619020 |
Copolymer of tetrafluoroethylene and perfluorinated propyl vinyl ether, containing 3,2|% or more but not more than 4,6|% by weight of perfluorinated propyl vinyl ether and less than 1|mg/kg of extractable fluoride ions |
| 3904619090 |
Other |
| 3904690000 |
Other |
| 3904690010 |
For cavity filling, for use in certain types of aircraft |
| 3904690091 |
Other |
| 3904690091 |
Copolymer of ethylene with chlorotrifluoroethylene and hexafluoro(2-methylpropene) in one of the forms mentioned in Note 6 (b) to Chapter 39 |
| 3904690092 |
Copolymer of tetrafluoroethylene and trifluoro(trifluoromethoxy)ethylene |
| 3904690093 |
Polyvinyl fluoride in one of the forms mentioned in Note 6 (b) to this Chapter |
| 3904690095 |
Copolymer of ethylene with chlorotrifluoroethylene, in one of the forms mentioned in note 6|(b) to Chapter 39 |
| 3904690096 |
Copolymer of ethylene and tetrafluoroethylene |
| 3904690099 |
Other |
| 3904691000 |
Poly(vinyl fluoride), in one of the forms mentioned in note 6(b) to this chapter |
| 3904699000 |
Other |
| 3904699010 |
For cavity filling, for use in certain types of aircraft |
| 3904699081 |
Poly(vinylidene fluoride) powder or in an aqueous suspension |
| 3904699091 |
Other |
| 3904699091 |
Copolymer of ethylene with chlorotrifluoroethylene and hexafluoro(2-methylpropene) in one of the forms mentioned in Note 6 (b) to Chapter 39 |
| 3904699092 |
Other |
| 3904699092 |
Copolymer of tetrafluoroethylene and trifluoro(trifluoromethoxy)ethylene |
| 3904699093 |
Other |
| 3904699093 |
Copolymer of ethylene with chlorotrifluoroethylene, in one of the forms mentioned in note 6|(b) to Chapter 39 |
| 3904699094 |
Copolymer of ethylene and tetrafluoroethylene |
| 3904699095 |
Poly(vinylidene fluoride), in powder form, for the preparation of paint or varnish for coating metal |
| 3904699096 |
Polychlorotrifluoroethylene, in one of the forms mentioned in note 6|(a) and (b) to Chapter 39 |
| 3904699097 |
Copolymer of chlorotrifluoroethylene and vinylidene difluoride |
| 3904699099 |
Other |
| 3904900000 |
Other |
| 3904900010 |
For cavity filling, for use in certain types of aircraft |
| 3904900090 |
Other |
UK Hs Code - 3905 : Polymers of vinyl acetate or of other vinyl esters, in primary forms; other vinyl polymers in primary forms
|
| 3905110000 |
Polymers of vinyl acetate |
| 3905110000 |
In aqueous dispersion |
| 3905120000 |
Poly(vinyl acetate) |
| 3905120000 |
In aqueous dispersion |
| 3905190000 |
Other |
| 3905190010 |
For cavity filling, for use in certain types of aircraft |
| 3905190020 |
Block copolymer of styrene and vinyl acetate, containing by weight 5|% or more but not more than 55|% of vinyl acetate |
| 3905190090 |
Other |
| 3905200000 |
Polyvinyl alcohols, whether or not containing unhydrolysed acetate groups |
| 3905210000 |
Vinyl acetate copolymers |
| 3905210000 |
In aqueous dispersion |
| 3905290000 |
Other |
| 3905290010 |
For cavity filling, for use in certain types of aircraft |
| 3905290090 |
Other |
| 3905290090 |
Other |
| 3905290091 |
Other |
| 3905290091 |
Copolymer of vinyl acetate, dibutyl maleate and acrylic acid, in the form of a solution in isopropyl acetate and toluene |
| 3905290099 |
Other |
| 3905300000 |
Poly(vinyl alcohol), whether or not containing unhydrolysed acetate groups |
| 3905300010 |
Poly(vinyl alcohol) partially acetalized with 5-(4-azido-2-sulphobenzylidene)-3-(formylpropyl)-rhodanine, sodium salt |
| 3905300020 |
Polyvinyl alcohols in the form of homo-polymer resins with a viscosity (measured in 4% solution) of 3|mPas or more but not exceeding 61|mPas and a degree of hydrolysis of 84,0|mol|% or more but not exceeding 99,9|mol|% |
| 3905300090 |
Other |
| 3905900000 |
Other |
| 3905900010 |
For cavity filling, for use in certain types of aircraft |
| 3905900093 |
Other |
| 3905900094 |
Polyvinylpyrrolidone, presented in powder form, the particles of which are less than|38|micrometers and which has a solubility in water at|25|!o! of less than, or equal to|1,5|% by weight and which is intended for the pharmaceutical industry |
| 3905900095 |
Polyvinyl butyral in the form of powder, for the production of film for laminated safety glass |
| 3905900096 |
Hydrogenated copolymers of vinyltoluena and alpha-methylstyrene |
| 3905900099 |
Other |
| 3905910000 |
Other |
| 3905910000 |
Copolymers |
| 3905910010 |
For cavity filling, for use in certain types of aircraft |
| 3905910090 |
Other |
| 3905910090 |
Other |
| 3905910091 |
Other |
| 3905910091 |
Copolymer of _N_-vinylcaprolactam, _N_-vinyl-2-pyrrolidone and dimethylaminoethyl methacrylate |
| 3905910092 |
Copolymer of vinylpyrrolidone and dimethylaminoethyl methacrylate, partially quaternized by diethyl sulfate, in the form of a solution in ethanol |
| 3905910093 |
Copolymer of ethylene and vinyl alcohol (EVOH) |
| 3905910099 |
Other |
| 3905990000 |
Other |
| 3905990010 |
For cavity filling, for use in certain types of aircraft |
| 3905990091 |
Other |
| 3905990092 |
Polyvinylpyrrolidone, presented in powder form, the particles of which are less than|38|micrometers and which has a solubility in water at|25|!o! of less than, or equal to|1,5|% by weight and which is intended for the pharmaceutical industry |
| 3905990093 |
Polyvinyl butyral in the form of powder, for the production of film for laminated safety glass |
| 3905990094 |
Polyvinyl acetate phthalate |
| 3905990095 |
Polymer of vinylpyrrolidone and dimethylaminoethyl methacrylate, containing by weight 97|% or more but not more than 99|% of vinylpyrrolidone, in the form of a solution in water |
| 3905990096 |
Hexadecylated or eicosylated polyvinylpyrrolidone |
| 3905990099 |
Other |
| 3905999000 |
Other |
| 3905999010 |
For cavity filling, for use in certain types of aircraft |
| 3905999092 |
Other |
| 3905999092 |
Polyvinyl butyral in the form of powder, for the production of film for laminated safety glass |
| 3905999093 |
Other |
| 3905999093 |
Poly(vinyl acetate phthalate) |
| 3905999094 |
Other |
| 3905999094 |
Polymer of vinylpyrrolidone and dimethylaminoethyl methacrylate, containing by weight 97|% or more but not more than 99|% of vinylpyrrolidone, in the form of a solution in water |
| 3905999095 |
Hexadecylated or eicosylated polyvinylpyrrolidone |
| 3905999097 |
Povidone (INN)-iodine |
| 3905999098 |
Poly(vinyl pyrrolidone) partially substituted by triacontyl groups, containing by weight 78|% or more but not more than 82|% of triacontyl groups |
| 3905999099 |
Other |
UK Hs Code - 3906 : Acrylic polymers in primary forms
|
| 3906100000 |
Poly(methyl methacrylate) |
| 3906100010 |
Poly(methyl methacrylate), in the form of expansible beads containing 2-methylpentane as blowing agent |
| 3906100020 |
Poly(methyl methacrylate) crosslinked with divinylbenzene |
| 3906100090 |
Other |
| 3906900000 |
Other |
| 3906900010 |
Poly[N-(3-hydroxyimino-1,1-dimethylbutyl)acrylamide] |
| 3906900020 |
Copolymers of 2-di-isopropylaminoethyl methacrylate and decyl methacrylate dissolved in N,N-dimethylacetamide, with a copolymer content of not less than 55|% by weight |
| 3906900030 |
Copolymer of acrylic acid with 2-ethylhexyl acrylate, containing by weight|10% or more but not more than|11% of 2-ethylhexyl acrylate |
| 3906900040 |
Copolymer of acrylonitrile and methylacrylate modified with polybutadieneacrylonitrile (NBR) |
| 3906900050 |
Polymerization products of acrylic acid, with alkyl methacrylate and small quantities of other monomers for use as thickners in the manufacture of textile printing pastes |
| 3906900060 |
Copolymer of methyl acrylate with ethylene and a monomer containing a non-terminal carboxy group as a substituent, containing by weight 50% or more o methyl acrylate, whether or not compounded with silica |
| 3906900070 |
Polymerization product of acrylic acid with small quantities of a polyunsaturated monomer, for the manufacture of medicaments of heading No 3003 or 3004 |
| 3906900080 |
Polymerization product of acrylic acid with small quantities of a polyunsaturated monomer, for use as a stabilizer in emulsions or dispersions with a pH of more than 13 |
| 3906900090 |
Other |
| 3906901000 |
Poly[N-(3-hydroxyimino-1,1-dimethylbutyl)acrylamide] |
| 3906902000 |
Copolymer of 2-diisopropylaminoethyl methacrylate with decyl methacrylate, in the form of a solution in N,N-dimethylacetamide, containing by weight 55 % or more of copolymer |
| 3906903000 |
Copolymer of acrylic acid with 2-ethylhexyl acrylate, containing by weight 10 % or more but not more than 11 % of 2-ethylhexyl acrylate |
| 3906904000 |
Copolymer of acrylonitrile with methyl acrylate, modified with polybutadiene-acrylonitrile (NBR) |
| 3906905000 |
Polymerisation product of acrylic acid with alkyl methacrylate and small quantities of other monomers, for use as a thickener in the manufacture of textile printing pastes |
| 3906906000 |
Copolymer of methyl acrylate with ethylene and a monomer containing a non-terminal carboxy group as a substituent, containing by weight 50 % or more of methyl acrylate, whether or not compounded with silica |
| 3906909000 |
Other |
| 3906909010 |
Polymerization product of acrylic acid with small quantities of a polyunsaturated monomer, for the manufacture of medicaments of heading No|3003 or 3004 |
| 3906909015 |
Photosensitive resin consisting of modified acrylate, acrylic monomer, catalyst (photoinitiator) and stabilizer |
| 3906909020 |
Polymerization product of acrylic acid with small quantities of a polyunsaturated monomer, for use as a stabilizer in emulsions or dispersions with a pH of more than 13 |
| 3906909030 |
Copolymer of styrene with hydroxyethyl methacrylate and 2-ethylhexyl acrylate, of a number average molecular weight (Mn) of 500 or more but not more than 6 000 |
| 3906909035 |
White powder of 1,2-ethanediol dimethacrylate-methyl methacrylate copolymer of a particle size of not more than 18 µm, insoluble in water |
| 3906909040 |
Copolymer of styrene with _?_-methylstyrene and acrylic acid, of a molecular weight (M@n) of 500 or more but not exceeding 6|000 |
| 3906909041 |
Poly(alkyl acrylate) with an ester alkyl chain of C10 to C30 |
| 3906909045 |
Copolymer of styrene, methyl methacrylate, butyl acrylate and either acrylic acid or hydroxyethyl methacrylate, of a molecular weight (M@n) of 500 or more but not exceeding 6|000 |
| 3906909055 |
Mixtures containing copolymers of methyl acrylate and ethylene and polyether-ester copolymers containing terephthalic acid, in the form of granules or pellets |
| 3906909060 |
Copolymer of butyl acrylate and vinyl chloride, containing by weight (58|+/-|1)|% of butyl acrylate and (42|+/-|1)|% of vinyl chloride, in the form of a aqueous emulsion |
| 3906909065 |
Polyalkylacrylate, chemically modified with cobalt, with a melting temperature (Tm) of 65 °C (± 5 °C), measured with Differential Scanning Calorimetry (DSC) |
| 3906909070 |
Copolymer of ethylene dimethacrylate with either methyl methacrylate or dodecyl methacrylate |
| 3906909075 |
Copolymer of _N_-[4,5-dihydro-5-oxo-1-(2,4,6-trichlorophenyl)(1',4-bi-1_H_-pyrazol)-3-yl]= methacrylamide, butyl acrylate and styrene, in the form of powder |
| 3906909080 |
Polydimethylsiloxane-graft-(polyacrylates; polymethacrylates) |
| 3906909085 |
Non aqueous dispersion type polymers of esters of acrylic acid with a hydrolyzable silyl group at one or both polymer ends |
| 3906909090 |
Other |
UK Hs Code - 3907 : Polyacetals, other polyethers and epoxide resins, in primary forms; polycarbonates, alkyd resins, polyallyl esters and other polyesters, in primary forms
|
| 3907100000 |
Polyacetals |
| 3907200000 |
Other polyethers |
| 3907201100 |
Polyether alcohols |
| 3907201100 |
Polyether alcohols |
| 3907201100 |
Polyethylene glycols |
| 3907201100 |
Polyethylene glycols |
| 3907201110 |
Poly(ethylene oxide) |
| 3907201110 |
Poly(ethylene oxide) |
| 3907201110 |
Poly(ethylene oxide) of a number average molecular weight (Mn) of 100 000 or more |
| 3907201120 |
Bis[Methoxypoly[ethyleneglycol)]-maleimidopropionamide, chemically modified with lysine, of a number average molecular weight (Mn) of 40 000 |
| 3907201130 |
Bis[Methoxypoly[ethyleneglycol)], chemically modified with lysine, bis(maleimide) terminated, of a number average molecular weight (Mn) of 40 000 |
| 3907201190 |
Other |
| 3907201190 |
Other |
| 3907201190 |
Other |
| 3907201200 |
Polyether alcohols |
| 3907201200 |
Polyethylene glycols |
| 3907201200 |
For the manufacture of pharmaceutical products |
| 3907201900 |
Other |
| 3907201900 |
Other |
| 3907201910 |
Polyether with polyacrylonitrile chains, whether or not containing styrene |
| 3907201910 |
Poly(ethylene oxide) |
| 3907201990 |
Other |
| 3907201990 |
Other |
| 3907202000 |
Other |
| 3907202011 |
With a hydroxyl number not exceeding 100 |
| 3907202011 |
Mixture, containing by weight 70 % or more but not more than 80 % of a polymer of glycerol and 1,2-epoxypropane and 20 % or more but not more than 30 % of a copolymer of dibutyl maleate and N-vinyl-2-pyrrolidone |
| 3907202012 |
Copolymer of tetrahydrofuran and tetrahydro-3-methylfuran with a number average molecular weight (Mn) of 3 500 (± 100) |
| 3907202019 |
Other |
| 3907202091 |
Other |
| 3907202091 |
Products containing co-polymers of dextrose, sorbitol and citric or phosphoric acid, containing not less than 90 % by weight of co-polymers on the ashfree and anhydrous basis |
| 3907202099 |
Other |
| 3907202100 |
Other |
| 3907202100 |
With a hydroxyl number not exceeding 100 |
| 3907202110 |
Mixture, containing by weight 70|% or more but not more than 80|% of a polymer of glycerol and 1,2-epoxypropane and 20|% or more but not more than 30|% of a copolymer of dibutyl maleate and N-vinyl-2-pyrrolidone |
| 3907202120 |
Copolymer of tetrahydrofuran and tetrahydro-3-methylfuran with a number average molecular weight (Mn) of 3 500 (± 100) |
| 3907202190 |
Other |
| 3907202900 |
Other |
| 3907202910 |
Products containing co-polymers of dextrose, sorbitol and citric or phosphoric acid, containing not less than 90|% by weight of co-polymers on the ashfree and anhydrous basis |
| 3907202920 |
Poly[oxy-1,4-phenyleneisopropylidene-1,4-phenyleneoxy-(2-hydroxytrimethylene)], of an average molecular weight (M@w) of more than 26|000, in one of the forms mentioned in note 6|(b) to Chapter 39 |
| 3907202990 |
Other |
| 3907209000 |
Other |
| 3907209010 |
Poly[oxy(2,6-dibromo-1,4-phenylene)] for use in the manufacture of polyamide |
| 3907209015 |
Bis{2-[?-hydroxy-poly(ethyleneoxy)]ethyl} hydroxymethylphosphonate |
| 3907209020 |
Poly(oxypropylene) having alkoxysilyl end-groups |
| 3907209030 |
Liquid poly(oxypropylene) with 3-(3-{2-[2-(2-mercaptoethoxy)ethoxy]ethylthio}(propoxycarbonylamino)-p-tolylcarbamoyloxy as the end group |
| 3907209040 |
Poly[oxy-1,4-phenyleneisopropylidene-1,4-phenyleneoxy-(2-hydroxytrimethylene)], of an average molecular weight of more than 26|000, in one of the forms mentioned in note 6|(b) to Chapter 39 |
| 3907209050 |
Reaction product of poly(oxylalkylene) polyol with a polycarboxylic acid and epsilon-caprolactam |
| 3907209060 |
?-4-Hydroxybutyl-?-hydroxypoly(oxytetramethylene), containing less than 1|mg/kg of halogen and less than 1|mg/kg of metal, and of a colour not exceeding 20 units on the Hazen scale |
| 3907209070 |
Polyether with polyacrylonitrile chains, whether or not containing styrene |
| 3907209070 |
Homopolymer of 1-chloro-2,3-epoxypropane (epichlorohydrin) |
| 3907209080 |
Copolymer of 1-chloro-2,3-epoxypropane with athylene oxide |
| 3907209090 |
Other |
| 3907209100 |
Other |
| 3907209100 |
Copolymer of 1-chloro-2,3-epoxypropane with ethylene oxide |
| 3907209900 |
Other |
| 3907209910 |
Bis{2-[_?_-hydroxy-poly(ethyleneoxy)]ethyl} hydroxymethylphosphonate |
| 3907209915 |
Poly(oxypropylene) having alkoxysilyl end-groups |
| 3907209920 |
Poly[oxy-1,4-phenyleneisopropylidene-1,4-phenyleneoxy-(2-hydroxytrimethylene)], of an average molecular weight of more than 26|000, in one of the forms mentioned in note 6|(b) to Chapter 39 |
| 3907209925 |
_?_-4-Hydroxybutyl-_?_-hydroxypoly(oxytetramethylene), containing less than 1|mg/kg of halogen and less than 1|mg/kg of metal, and of a colour not exceeding 20 units on the Hazen scale |
| 3907209930 |
Homopolymer of 1-chloro-2,3-epoxypropane (epichlorohydrin) |
| 3907209935 |
Polyethylene glycol chemically modified with an isocyanate group containing a carbodiimide group, in the form of a solution in 2-methoxy-1-methylethyl acetate |
| 3907209940 |
Polydimethylsiloxane grafted with a poly(ethylene oxide) having C@2@0 and C@2@2 fatty acids ester end-groups |
| 3907209945 |
Copolymer of ethylene oxide and propylene oxide, having aminopropyl and methoxy end-groups |
| 3907209950 |
Copolymer of ethylene oxide and propylene oxide, having 2-aminopropyl end-groups |
| 3907209950 |
Vinyl-silyl terminated perfluoropolyether polymer or an assortment of two components consisting of the same type of vinyl-silyl terminated perfluoropolyether polymer as the main ingredient |
| 3907209955 |
Succinimidyl ester of methoxy poly(ethylene glycol)propionic acid, of a number average molecular weight (Mn) of 5 000 |
| 3907209990 |
Other |
| 3907300000 |
Epoxide resins |
| 3907300010 |
Epoxide resin for the manufacture of goods of heading No. 8541 or 8542 |
| 3907300020 |
Epoxyde resin in the form of powder, containing by weight 44|% or more but not more than 55|% of quartz and 0,5|% or more but not more than 1|% of diantimony trioxide, for the coating of film capacitors |
| 3907300030 |
Epoxyde resin, without solvent, containing mineral fillers (silica), without glass fibre, of a specific weight at 25|ºC of 1,55|g/cm$3 or more but not exceeding 1,60|g/cm$3 |
| 3907300040 |
Epoxide resin, containing by weight 70|% or more of silicon dioxide, for the encapsulation of goods of heading No|8533, 8535, 8536, 8541, 8542 or 8548 |
| 3907300050 |
Liquid epoxide resin of 2-propenenitrile/1,3-butadiene-epoxide copolymer, not containing any solvent, with:
•a zinc borate hydrate content of not more than 40% by weight,
•a diantimony trioxide content of not more than 5% by weight |
| 3907300090 |
Other |
| 3907400000 |
Polycarbonates |
| 3907400010 |
Copolymer of hexane-1,6-diol, cyclohexane-1,4-dimethanol and ethylene carbonate |
| 3907400020 |
?-(2,4,6-Tribromophenyl)-?-(2,4,6-tribromophenoxy)poly[oxy(2,6-dibromo- 1,4-phenylene)isopropylidene(3,5-dibromo-1,4-phenylene)oxycarbonyl] |
| 3907400090 |
Other |
| 3907500000 |
Alkyd resins |
| 3907600000 |
Poly(ethylene terephthalate) |
| 3907600010 |
Pegoterate (INN) |
| 3907600090 |
Other |
| 3907601000 |
For the manufacture of pharmaceutical products |
| 3907602000 |
Having a viscosity number of 78 ml/g or higher |
| 3907608000 |
Other |
| 3907608010 |
Having a viscosity number of 78 ml/g of higher |
| 3907608010 |
Copolymer of terephthalic acid and isophthalic acid with ethylene glycol, butane-1,4-diol and hexane-1,6-diol |
| 3907608020 |
Oxygen binding copolymer (as determined by the ASTM D 1434 and 3985 methods), obtained from benzenedicarboxylic acids, ethylene glycol and polybutadiene substituted by hydroxy groups |
| 3907608090 |
Other |
| 3907608090 |
Other |
| 3907609000 |
Other |
| 3907700000 |
Poly(lactic acid) |
| 3907910000 |
Other polyesters |
| 3907910000 |
Unsaturated |
| 3907911000 |
Liquid |
| 3907919000 |
Other |
| 3907919010 |
Diallyl phthalate prepolymer, in the form of powder |
| 3907919090 |
Other |
| 3907990000 |
Other |
| 3907990020 |
Polyester of a mixture of isophthalic acid and terephthalic acid with 4,4'-isopropylidenediphenol |
| 3907990030 |
Poly(oxy-1,4-phenylenecarbonyl) in powder form |
| 3907990040 |
Poly(ethylene naphthalene-2,6-dicarbolylate) |
| 3907990090 |
Other |
| 3907991000 |
With a hydroxyl number not exceeding 100 |
| 3907991000 |
Poly(ethylene naphthalene-2,6-dicarboxylate) |
| 3907991010 |
Poly(oxy-1,4-phenylenecarbonyl), in the form of powder |
| 3907991020 |
Poly(ethylene naphthalene-2,6-dicarbolylate) |
| 3907991030 |
Liquid crystal copolyester with a melting point of not less than 270|ºC, whether or not containing fillers |
| 3907991090 |
Other |
| 3907991100 |
With a hydroxyl number not exceeding 100 |
| 3907991100 |
Poly(ethylene naphthalene-2,6-dicarboxylate) |
| 3907991900 |
Other |
| 3907991910 |
Poly(oxy-1,4-phenylenecarbonyl), in the form of powder |
| 3907991920 |
Liquid crystal copolyester with a melting point of not less than 270|ºC, whether or not containing fillers |
| 3907991930 |
Poly(lactic acid) |
| 3907991940 |
Copolymer of isophthalic acid and 5-sodiosulphoisophthalic acid with cyclohexanedimethanol and diethylene glycol |
| 3907991950 |
Semi-crystalline polycyclohexylenedimethylene terephthalate polymer resin, containing by weight 10|% or more but not more than 40|% of glass fibre, in the form of granules or pellets |
| 3907991960 |
Copolymer of terephthalic acid and isophthalic acid with bisphenol A |
| 3907991990 |
Other |
| 3907999000 |
Other |
| 3907999000 |
Other |
| 3907999010 |
Poly(oxy-1,4-phenylenecarbonyl), in the form of powder |
| 3907999010 |
Poly(oxy-1,4-phenylenecarbonyl), in the form of powder |
| 3907999020 |
Poly(ethylene naphthalene-2,6-dicarbolylate) |
| 3907999020 |
Liquid crystal copolyester with a melting point of not less than 270 ºC, whether or not containing fillers |
| 3907999050 |
Semi-crystalline polycyclohexylenedimethylene terephthalate polymer resin, containing by weight 10 % or more but not more than 40 % of glass fibre, in the form of granules or pellets |
| 3907999060 |
Copolymer of terephthalic acid and isophthalic acid with bisphenol A |
| 3907999090 |
Other |
| 3907999090 |
Other |
| 3907999100 |
Other |
| 3907999100 |
Poly(ethylene naphthalene-2,6-dicarboxylate) |
| 3907999800 |
Other |
| 3907999810 |
Poly(oxy-1,4-phenylenecarbonyl), in the form of powder |
| 3907999890 |
Other |
| 3907999900 |
Other |
| 3907999910 |
Poly(oxy-1,4-phenylenecarbonyl), in the form of powder |
| 3907999990 |
Other |
UK Hs Code - 3908 : Polyamides in primary forms
|
| 3908100000 |
Polyamide-6, -11, -12, -6,6, -6,9, -6,10 or -6,12 |
| 3908900000 |
Other |
| 3908900010 |
Poly(iminomethylene-1,3-phenylenemethyleneiminoadipoyl), in one of the forms mentioned in note 6|(b) to Chapter 39 |
| 3908900020 |
Copolymer consisting of hexamethylenediamine, isophthalic acid and terephthalic acid, in one of the forms mentioned in note 6(b) to Chapter 39 |
| 3908900030 |
Reaction product of mixtures of octadecanecarboxylic acids polymerised with an aliphatic polyetherdiamine |
| 3908900040 |
Thermoplastic polyamide resin having a fire point of more than 750 °C, for use in the manufacture of deflection yokes of cathode ray tubes |
| 3908900090 |
Other |
UK Hs Code - 3909 : Amino-resins, phenolic resins and polyurethanes, in primary forms
|
| 3909100000 |
Urea resins; thiourea resins |
| 3909200000 |
Melamine resins |
| 3909300000 |
Other amino-resins |
| 3909400000 |
Phenolic resins |
| 3909400010 |
Polycondensation product of phenol with formaldehyde, in the form of hollow spheres of a diameter of less than 150|?m |
| 3909400090 |
Other |
| 3909500000 |
Polyurethanes |
| 3909500010 |
Polyurethane of 2,2'-(tert-butylimino)diethanol and 4,4'-methylenedicyclohexyl diisocyanate, in the form of a solution in N,N-diamethylacetamide containing by weight 48|% or more of polymer |
| 3909500090 |
Other |
| 3909501000 |
Polyurethane of 2,2'-(tert-butylimino)diethanol and 4,4'-methylenedicyclohexyl diisocyanate, in the form of a solution in N,N-dimethylacetamide, containing by weight 50 % or more of polymer |
| 3909509000 |
Other |
| 3909509010 |
UV-curable liquid photopolymer consisting of a mixture containing by weight 60 % or more of polyurethanes and 30 % (± 8 %) of acrylates |
| 3909509090 |
Other |
UK Hs Code - 3910 : Silicones in primary forms
|
| 3910000010 |
3-[(2-Aminoethyl)amino]propyl(methyl)cyclosiloxane |
| 3910000020 |
Block copolymer of poly(methyl-3,3,3-trifluoropropylsiloxane) and poly[methyl(vinyl)siloxane] |
| 3910000030 |
Polydimethylsiloxane with a degree of polymerisation of 2800 monomer units (+/- 100) |
| 3910000040 |
Biocompatible silicones for the manufacture of long term surgical implants |
| 3910000050 |
Silicone based pressure sensitive adhesive in solvent containing copoly(dimethylsiloxane/diphenylsiloxane) gum |
| 3910000090 |
Other |
| 3911000000 |
Petroleum resins, coumarone-indene resins, polyterpenes, polysulphides, polysulphones and other products specified in note 3 to this chapter, not elsewhere specified or included, in primary forms |
UK Hs Code - 3911: Petroleum resins, coumarone, indene or coumarone-indene resins and polyterpenes
|
| 3911100010 |
For cavity filling, for use in certain types of aircraft |
| 3911100090 |
Other |
| 3911900000 |
Other |
| 3911901000 |
Condensation or rearrangement polymerisation products whether or not chemically modified |
| 3911901010 |
Poly(oxy-1,4-phenylenesulphonyl-1,4-phenyleneoxy-1,4-phenyleneisopropylidene-1,4-phenylene) in one of the forms mentioned in Note 6 (b) to this Chapter |
| 3911901020 |
Reaction product of poly(oxylalkylene) polyol with a polycarboxylic acid and epsilon-caprolactam |
| 3911901020 |
Polyfurfuryl alcohol |
| 3911901020 |
Poly(oxy-1,4-phenylenesulfonyl-1,4-phenyleneoxy-4,4'-biphenylene) |
| 3911901030 |
Poly(thio-1,4-phenylene) |
| 3911901090 |
Other |
| 3911901100 |
Condensation or rearrangement polymerisation products whether or not chemically modified |
| 3911901100 |
Poly(oxy-1,4-phenylenesulphonyl-1,4-phenyleneoxy-1,4-phenyleneisopropylidene-1,4-phenylene), in one of the forms mentioned in note 6(b) to this chapter |
| 3911901300 |
Poly(thio-1,4-phenylene) |
| 3911901900 |
Other |
| 3911901910 |
Poly(oxy-1,4-phenylenesulfonyl-1,4-phenyleneoxy-4,4'-biphenylene) |
| 3911901920 |
Hydrocarbon prepolymer, obtained by the reaction of cyclopentadiene and 1,3-pentadiene |
| 3911901930 |
Copolymer of ethyleneimine and ethyleneimine dithiocarbamate, in an aqueous solution of sodium hydroxide |
| 3911901990 |
Other |
| 3911909000 |
Other |
| 3911909010 |
For cavity filling, for use in certain types of aircraft |
| 3911909081 |
Other |
| 3911909081 |
Polymerization products of a (polybutadiene)polyol and two lactams N,N'-linked by the bivalent acryl radical of a dicarboxylic acid |
| 3911909082 |
Alternating copolymer of ethylene with malaic anhydride, for use as a thickener in textile pigment printing pastes |
| 3911909085 |
Other |
| 3911909085 |
Copolymer of dibutyl maleate and N-vinyl-2-pyrrolidone, in one of the forms mentioned in note 6 (a) of Chapter 39 |
| 3911909086 |
Copolymer of p-cresol and divinylbenzene, in the form of a solution in N,N-dimethylacetamide, containing by weight 48% or more of polymer |
| 3911909087 |
Copolymer of vinyltoluene and ?-methylstyrene |
| 3911909088 |
Hydrogenated copolymers of vinyltoluena and alpha-methylstyrene |
| 3911909089 |
Copolymer of ?-methylstyrene and styrene, having a softening point exceeding 113|ºC |
| 3911909091 |
Copolymer of maleic acid and methyl vinyl ether, monoesterified with ethyl and/or isopropyl and/or butyl groups, in the form of a solution in ethanol, ethanol and butanol, isopropanol or isopropanol and butanol |
| 3911909092 |
Mixed calcium and sodium salt of a copolymer of maleic acid and methyl vinyl ether, having a calcium content of 9|% or more but not more than 16|% by weight |
| 3911909093 |
Copolymer of maleic acid and methyl vinyl ether |
| 3911909099 |
Other |
| 3911909100 |
Other |
| 3911909100 |
Copolymer of p-cresol and divinylbenzene, in the form of a solution in N,N-dimethylacetamide containing by weight 50|% or more of polymer |
| 3911909200 |
Other |
| 3911909200 |
Copolymer of p-cresol and divinylbenzene, in the form of a solution in N,N-dimethylacetamide containing by weight 50 % or more of polymer; hydrogenated copolymers of vinyltoluene and a-methylstyrene |
| 3911909300 |
Hydrogenated copolymers of vinyltoluene and ?-methylstyrene |
| 3911909900 |
Other |
| 3911909910 |
For cavity filling, for use in certain types of aircraft |
| 3911909920 |
Other |
| 3911909920 |
Copolymer of dibutyl maleate and _N_-vinyl-2-pyrrolidone, in one of the forms mentioned in note 6 (a) of Chapter 39 |
| 3911909925 |
Copolymer of vinyltoluene and _?_-methylstyrene |
| 3911909930 |
Copolymer of _?_-methylstyrene and styrene, having a softening point exceeding 113|ºC |
| 3911909931 |
Copolymers of butadiene and maleic acid, whether or not containing its ammonium salts |
| 3911909935 |
Copolymer of maleic acid and methyl vinyl ether, monoesterified with ethyl and/or isopropyl and/or butyl groups, in the form of a solution in ethanol, ethanol and butanol, isopropanol or isopropanol and butanol |
| 3911909940 |
Mixed calcium and sodium salt of a copolymer of maleic acid and methyl vinyl ether, having a calcium content of 9|% or more but not more than 16|% by weight |
| 3911909945 |
Copolymer of maleic acid and methyl vinyl ether |
| 3911909950 |
Copolymer of styrene with ?-methylstyrene and acrylic acid, of a number average molecular weight (Mn) of 500 or more but not more than 6 000 |
| 3911909960 |
Hydrocarbon prepolymer, obtained by the reaction of cyclopentadiene and 1,3-pentadiene |
| 3911909965 |
Calcium zinc salt of a copolymer of maleic acid and methyl vinyl ether |
| 3911909970 |
Poly(vinyl pyrrolidone), modified with triacont-1-ene, containing by weight 78|% or more but not more than 82|% of triacont-1-ene |
| 3911909975 |
Microspheres of a copolymer of divinylbenzene and styrene, of an average diameter of 220|µm or more but not exceeding 575|µm |
| 3911909980 |
Poly[(8-methyl-8-methoxycarbonyltricyclo[5.2.1.0$2$,$6]decane-3,5-diyl)ethylene] |
| 3911909985 |
Polymer of ethylene and styrene, cross-linked with divinylbenzene, in the form of a suspension |
| 3911909986 |
Copolymer of methyl vinyl ether and maleic acid anhydride |
| 3911909990 |
Other |
UK Hs Code - 3912 : Cellulose and its chemical derivatives, not elsewhere specified or included, in primary forms
|
| 3912110000 |
Cellulose acetates |
| 3912110000 |
Non-plasticised |
| 3912110010 |
Non-plasticized cellulose triacetate, in the form of flakes, for the manufacture of cellulose triacetate yarn |
| 3912110020 |
Cellulose acetate flakes for use in the manufacture of cellulose acetate filament tow |
| 3912110090 |
Other |
| 3912120000 |
Plasticised |
| 3912200000 |
Cellulose nitrates (including collodions) |
| 3912201100 |
Non-plasticised |
| 3912201100 |
Collodions and celloidin |
| 3912201900 |
Other |
| 3912209000 |
Plasticised |
| 3912310000 |
Cellulose ethers |
| 3912310000 |
Carboxymethylcellulose and its salts |
| 3912390000 |
Other |
| 3912391000 |
Ethylcellulose |
| 3912391010 |
Ethylcellulose, not plasticized |
| 3912391020 |
Ethylcellulose, in the form of aqueous dispersion containing hexadecan-1-ol and sodium dodecyl sulfate, containing by weight (27|+/-|3)|% of ethylcellulose |
| 3912391090 |
Other |
| 3912392000 |
Hydroxypropylcellulose |
| 3912398000 |
Other |
| 3912398010 |
Cellulose, both hydroxyethylated and ethylated, insoluble in water |
| 3912398020 |
Cellulose, both hydroxyethylated and alkylated with alkyl chain-lengths of 3 or more carbon atoms |
| 3912398090 |
Other |
| 3912398500 |
Other |
| 3912398510 |
Ethylcellulose, not plasticized |
| 3912398520 |
Ethylcellulose, in the form of aqueous dispersion containing hexadecan-1-ol and sodium dodecyl sulfate, containing by weight (27 +/- 3) % of ethylcellulose |
| 3912398530 |
Cellulose, both hydroxyethylated and alkylated with alkyl chain-lengths of 3 or more carbon atoms |
| 3912398590 |
Other |
| 3912399000 |
Other |
| 3912399010 |
Cellulose, both hydroxyethylated and ethylated, insoluble in water |
| 3912399020 |
Hydroxypropylcellulose |
| 3912399030 |
Hydroxyalkylhydroxyethylcellulose |
| 3912399040 |
Cellulose, both hydroxyethylated and alkylated with alkyl chain-lengths of 3 or more carbon atoms |
| 3912399090 |
Other |
| 3912900000 |
Other |
| 3912901000 |
Cellulose esters |
| 3912901010 |
Cellulose acetato-butyrato, for the manufacture of interior items for cars |
| 3912901090 |
Other |
| 3912901090 |
Other |
| 3912909000 |
Other |
UK Hs Code - 3913 : Natural polymers (for example, alginic acid) and modified natural polymers (for example, hardened proteins, chemical derivatives of natural rubber), not elsewhere specified or included, in primary forms
|
| 3913100000 |
Alginic acid, its salts and esters |
| 3913900000 |
Other |
| 3913900010 |
Chemical derivatives of natural rubber |
| 3913900081 |
Blend of cyanoethyl pullulan and cyanoethyl poly(vinyl alcohol) |
| 3913900085 |
Sodium hyaluronate |
| 3913900085 |
Sterile |
| 3913900086 |
Non sterile |
| 3913900091 |
Other |
| 3913900091 |
Dextran |
| 3913900092 |
Protein, chemically modified by carboxylation and/or phthalic acid addition, having a weight average molecular weight (Mw) of 100 000 to 300 000 |
| 3913900092 |
Protein, chemically modified by carboxylation and/or phthalic acid addition, having a weight average molecular weight (Mw) of 100 000 to 300 000 |
| 3913900093 |
Hardened proteins |
| 3913900093 |
Hardened proteins |
| 3913900095 |
Chondroitinsulfuric acid, sodium salt |
| 3913900095 |
Chondroitinsulfuric acid, sodium salt |
| 3913900096 |
Powder consisting of 90|% (± 5|%) by weight of a high amylose extruded biopolymer produced from corn starch, 10|% (± 5|%) by weight of a synthetic polymer and 0.5|% (± 0.25|%) of stearic acid |
| 3913900096 |
Powder consisting of 90|% (± 5|%) by weight of a high amylose extruded biopolymer produced from corn starch, 10|% (± 5|%) by weight of a synthetic polymer and 0.5|% (± 0.25|%) of stearic acid |
| 3913900097 |
Chitosonium pyrrolidonecarboxylate |
| 3913900097 |
Chitosonium pyrrolidonecarboxylate |
| 3913900098 |
Sodium hyaluronate |
| 3913900098 |
Sodium hyaluronate |
| 3913900099 |
Other |
| 3913900099 |
Other |
| 3913901000 |
Chemical derivatives of natural rubber |
| 3913902000 |
Amylopectin |
| 3913903000 |
Amylose |
| 3913908000 |
Other |
| 3913908010 |
Dextran |
| 3913908020 |
Hardened proteins |
| 3913908030 |
Chondroitinsulfuric acid, sodium salt |
| 3913908040 |
Chitosonium pyrrolidonecarboxylate |
| 3913908090 |
Other |
| 3913909000 |
Other |
| 3913909010 |
Dextran |
| 3913909020 |
Hardened proteins |
| 3913909090 |
Other |
UK Hs Code - 3914 : Ion-exchangers based on polymers of headings 3901 to 3913, in primary forms
|
| 3914000020 |
Colestipol hydrochloride (INNM) |
| 3914000090 |
Other |
UK Hs Code - 3915 : II. WASTE, PARINGS AND SCRAP; SEMI-MANUFACTURES; ARTICLES
|
| 3915000000 |
Waste, parings and scrap, of plastics |
| 3915100000 |
Of polymers of ethylene |
| 3915200000 |
Of polymers of styrene |
| 3915300000 |
Of polymers of vinyl chloride |
| 3915900000 |
Of other plastics |
| 3915901100 |
Of addition polymerisation products |
| 3915901100 |
Of polymers of propylene |
| 3915901100 |
Of polymers of propylene |
| 3915901300 |
Of acrylic polymers |
| 3915901800 |
Other |
| 3915901900 |
Other |
| 3915908000 |
Other |
| 3915909000 |
Other |
| 3915909010 |
Waste, parings and scrap of photographic, cinematographic and radiographic films |
| 3915909090 |
Other |
| 3915909100 |
Other |
| 3915909100 |
Of epoxide resins |
| 3915909300 |
Of cellulose and its chemical derivatives |
| 3915909310 |
Waste and scrap of photographic (including cinematographic) and X-ray film |
| 3915909320 |
Of cellulose nitrates |
| 3915909330 |
Waste, parings and scrap of photographic, cinematographic and radiographic films |
| 3915909390 |
Other |
| 3915909900 |
Other |
| 3915909910 |
Waste and scrap of photographic (including cinematographic) and X-ray film |
| 3915909920 |
Waste and scrap from polyester film coated with a tungsten compound or with rare-earth metal compounds |
| 3915909990 |
Other |
UK Hs Code - 3916 : Monofilament of which any cross-sectional dimension exceeds 1 mm, rods, sticks and profile shapes, whether or not surface-worked but not otherwise worked, of plastics
|
| 3916100000 |
Of polymers of ethylene |
| 3916100010 |
For use in certain types of aircraft |
| 3916100090 |
Other |
| 3916200000 |
Of polymers of vinyl chloride |
| 3916200010 |
For use in certain types of aircraft |
| 3916200010 |
For use in certain types of aircraft |
| 3916200090 |
Other |
| 3916200090 |
Other |
| 3916201000 |
Of poly(vinyl chloride) |
| 3916201010 |
For use in certain types of aircraft |
| 3916201090 |
Other |
| 3916209000 |
Other |
| 3916209010 |
For use in certain types of aircraft |
| 3916209090 |
Other |
| 3916900000 |
Of other plastics |
| 3916901000 |
Of condensation or rearrangement polymerisation products, whether or not chemically modified |
| 3916901100 |
Of condensation or rearrangement polymerisation products, whether or not chemically modified |
| 3916901100 |
Of polyesters |
| 3916901300 |
Of polyamides |
| 3916901500 |
Of epoxide resins |
| 3916901510 |
Epoxide resin, containing by weight 70|% or more of silicon dioxide, for the encapsulation of goods of heading No|8533, 8535, 8536, 8541, 8542 or 8548 |
| 3916901590 |
Other |
| 3916901900 |
Other |
| 3916905000 |
Of addition polymerisation products |
| 3916905010 |
For use in certain types of aircraft |
| 3916905090 |
Other |
| 3916905100 |
Of addition polymerisation products |
| 3916905100 |
Of polymers of propylene |
| 3916905110 |
For use in certain types of aircraft |
| 3916905190 |
Other |
| 3916905900 |
Other |
| 3916905910 |
For use in certain types of aircraft |
| 3916905990 |
Other |
| 3916909000 |
Other |
| 3916909010 |
Of regenerated cellulose |
| 3916909010 |
Composite profile shape, reinforced with glass fibres, produced by pultrusion, for the manufacture of window frames |
| 3916909020 |
Of cellulose nitrates |
| 3916909090 |
Other |
| 3916909090 |
Other |
UK Hs Code - 3917 : Tubes, pipes and hoses, and fittings therefor (for example, joints, elbows, flanges), of plastics
|
| 3917100000 |
Artificial guts (sausage casings) of hardened protein or of cellulosic materials |
| 3917101000 |
Of hardened protein |
| 3917109000 |
Of cellulosic materials |
| 3917109010 |
Of regenerated cellulose |
| 3917109090 |
Other |
| 3917210000 |
Tubes, pipes and hoses, rigid |
| 3917210000 |
Of polymers of ethylene |
| 3917211000 |
Seamless and of a length exceeding the maximum cross-sectional dimension, whether or not surface-worked, but not otherwise worked |
| 3917211010 |
For use in certain types of aircraft |
| 3917211090 |
Other |
| 3917219000 |
Other |
| 3917219010 |
With fittings attached, for use in civil aircraft |
| 3917219020 |
For use in certain types of aircraft |
| 3917219090 |
Other |
| 3917219100 |
Other |
| 3917219100 |
With fittings attached, for use in civil aircraft |
| 3917219900 |
Other |
| 3917219910 |
For use in certain types of aircraft |
| 3917219990 |
Other |
| 3917220000 |
Of polymers of propylene |
| 3917221000 |
Seamless and of a length exceeding the maximum cross-sectional dimension, whether or not surface-worked, but not otherwise worked |
| 3917221010 |
For use in certain types of aircraft |
| 3917221090 |
Other |
| 3917229000 |
Other |
| 3917229010 |
With fittings attached, for use in civil aircraft |
| 3917229020 |
For use in certain types of aircraft |
| 3917229090 |
Other |
| 3917229100 |
Other |
| 3917229100 |
With fittings attached, for use in civil aircraft |
| 3917229900 |
Other |
| 3917229910 |
For use in certain types of aircraft |
| 3917229990 |
Other |
| 3917230000 |
Of polymers of vinyl chloride |
| 3917231000 |
Seamless and of a length exceeding the maximum cross-sectional dimension, whether or not surface-worked, but not otherwise worked |
| 3917231010 |
For use in certain types of aircraft |
| 3917231090 |
Other |
| 3917239000 |
Other |
| 3917239010 |
With fittings attached, for use in civil aircraft |
| 3917239020 |
For use in certain types of aircraft |
| 3917239090 |
Other |
| 3917239100 |
Other |
| 3917239100 |
With fittings attached, for use in civil aircraft |
| 3917239900 |
Other |
| 3917239910 |
For use in certain types of aircraft |
| 3917239990 |
Other |
| 3917290000 |
Of other plastics |
| 3917290011 |
Of addition polymerisation products |
| 3917290011 |
For use in certain types of aircraft |
| 3917290019 |
Other |
| 3917290091 |
Other |
| 3917290091 |
With fittings attached, for use in civil aircraft |
| 3917290099 |
Other |
| 3917291100 |
Seamless and of a length exceeding the maximum cross-sectional dimension, whether or not surface-worked, but not otherwise worked |
| 3917291100 |
Of condensation or rearrangement polymerization products, whether or not chemically modified |
| 3917291100 |
Of epoxide resins |
| 3917291200 |
Seamless and of a length exceeding the maximum cross-sectional dimension, whether or not surface-worked, but not otherwise worked |
| 3917291200 |
Of condensation or rearrangement polymerisation products, whether or not chemically modified |
| 3917291300 |
Other |
| 3917291500 |
Of addition polymerisation products |
| 3917291510 |
For use in certain types of aircraft |
| 3917291590 |
Other |
| 3917291900 |
Other |
| 3917291910 |
Of regenerated cellulose |
| 3917291920 |
Of cellulose nitrates |
| 3917291990 |
Other |
| 3917299000 |
Other |
| 3917299010 |
With fittings attached, for use in civil aircraft |
| 3917299020 |
Of addition polymerization products, for use in certain types of aircraft |
| 3917299090 |
Other |
| 3917299100 |
Other |
| 3917299100 |
With fittings attached, for use in civil aircraft |
| 3917299900 |
Other |
| 3917299910 |
Of addition polymerization products, for use in certain types of aircraft |
| 3917299990 |
Other |
| 3917310000 |
Other tubes, pipes and hoses |
| 3917310000 |
Flexible tubes, pipes and hoses, having a minimum burst pressure of 27,6 MPa |
| 3917310010 |
With fittings attached, for use in civil aircraft |
| 3917310020 |
For use in certain types of aircraft |
| 3917310090 |
Other |
| 3917311000 |
With fittings attached, for use in civil aircraft |
| 3917319000 |
Other |
| 3917319010 |
For use in certain types of aircraft |
| 3917319090 |
Other |
| 3917320000 |
Other, not reinforced or otherwise combined with other materials, without fittings |
| 3917320010 |
For use in certain types of aircraft |
| 3917320091 |
Other |
| 3917320091 |
Pipe consisting of a block copolymer of polytetrafluoroethylene and polyperfluoroalkoxytrifluoroethylene, of a length of not more than 600 mm, a diameter of not more than 85 mm and a wall-thickness of 30 ?m or more but not exceeding 110 ?m |
| 3917320099 |
Other |
| 3917321000 |
Seamless and of a length exceeding the maximum cross-sectional dimension, whether or not surface-worked, but not otherwise worked |
| 3917321000 |
Of condensation or rearrangement polymerisation products, whether or not chemically modified |
| 3917321010 |
Flexible pipe of silicone foam, with continuous channels, of a Shore A hardness of 7 or more but not exceeding 48 and a density of 0,28|g/cm$3 or more but not exceeding 0,92|g/cm$3 |
| 3917321090 |
Other |
| 3917321100 |
Seamless and of a length exceeding the maximum cross-sectional dimension, whether or not surface-worked, but not otherwise worked |
| 3917321100 |
Of condensation or rearrangement polymerization products, whether or not chemically modified |
| 3917321100 |
Of epoxide resins |
| 3917321900 |
Other |
| 3917321910 |
Flexible pipe of silicone foam, with continuous channels, of a Shore A hardness of 7 or more but not exceeding 48 and a density of 0,28|g/cm$3 or more but not exceeding 0,92|g/cm$3 |
| 3917321990 |
Other |
| 3917323100 |
Of addition polymerisation products |
| 3917323100 |
Of polymers of ethylene |
| 3917323110 |
For use in certain types of aircraft |
| 3917323190 |
Other |
| 3917323190 |
Other |
| 3917323191 |
Other |
| 3917323191 |
Assembly of heat-shrinkable tubing of polyethylene with poly(vinyl acetate), arranged in parallel at equally spaced intervals and attached at one or both ends by perforated plastic strips, in rolls |
| 3917323192 |
Other |
| 3917323192 |
Insulating tubing (heat-shrinkable tubing) of ethylene polymers, whether or not internally coated or covered with a thermoplastic adhesive, for use in nuclear plants |
| 3917323198 |
Other |
| 3917323199 |
Other |
| 3917323199 |
Other |
| 3917323500 |
Of polymers of vinyl chloride |
| 3917323510 |
For use in certain types of aircraft |
| 3917323590 |
Other |
| 3917323900 |
Other |
| 3917323910 |
of other addition polymerization products, for use in certain types of aircraft |
| 3917323920 |
Pipe consisting of a block copolymer of polytetrafluoroethylene and polyperfluoroalkoxytrifluoroethylene, of a length of not more than 600|mm, a diameter of not more than 85|mm and a wall-thickness of 30|?m or more but not exceeding 110|?m |
| 3917323930 |
Thermo-shrinkable polystyrene tube for use in the manufacture of zinc-carbon batteries |
| 3917323990 |
Other |
| 3917325100 |
Other |
| 3917325110 |
Of regenerated cellulose |
| 3917325120 |
Of cellulose nitrates |
| 3917325190 |
Other |
| 3917329100 |
Other |
| 3917329100 |
Artificial sausage casings |
| 3917329900 |
Other |
| 3917329910 |
Assembly of heat-shrinkable tubing of polyethylene with poly(vinyl acetate), arranged in parallel at equally spaced intervals and attached at one or both ends by perforated plastic strips, in rolls |
| 3917329990 |
Other |
| 3917330000 |
Other, not reinforced or otherwise combined with other materials, with fittings |
| 3917330010 |
With fittings attached, for use in civil aircraft |
| 3917330090 |
Other |
| 3917331000 |
With fittings attached, for use in civil aircraft |
| 3917339000 |
Other |
| 3917390000 |
Other |
| 3917390010 |
With fittings attached, for use in civil aircraft |
| 3917390091 |
Other |
| 3917390091 |
For use in certain types of aircraft |
| 3917390099 |
Other |
| 3917391100 |
Seamless and of a length exceeding the maximum cross-sectional dimension, whether or not surface-worked, but not otherwise worked |
| 3917391100 |
Of condensation or rearrangement polymerization products, whether or not chemically modified |
| 3917391100 |
Of epoxide resins |
| 3917391200 |
Seamless and of a length exceeding the maximum cross-sectional dimension, whether or not surface-worked, but not otherwise worked |
| 3917391200 |
Of condensation or rearrangement polymerisation products, whether or not chemically modified |
| 3917391300 |
Other |
| 3917391500 |
Of addition polymerisation products |
| 3917391510 |
For use in certain types of aircraft |
| 3917391590 |
Other |
| 3917391900 |
Other |
| 3917391910 |
Of regenerated cellulose |
| 3917391920 |
Of cellulose nitrates |
| 3917391990 |
Other |
| 3917399000 |
Other |
| 3917399010 |
With fittings attached, for use in civil aircraft |
| 3917399090 |
Other |
| 3917399100 |
Other |
| 3917399100 |
With fittings attached, for use in civil aircraft |
| 3917399900 |
Other |
| 3917400000 |
Fittings |
| 3917400010 |
For use in civil aircraft |
| 3917400090 |
Other |
| 3917400091 |
Other |
| 3917400091 |
Plastic connectors containing O-rings, a retainer clip and a release system for insertion into car fuel hoses |
| 3917400099 |
Other |
| 3917401000 |
For use in civil aircraft |
| 3917409000 |
Other |
UK Hs Code - 3918 : Floor coverings of plastics, whether or not self-adhesive, in rolls or in the form of tiles; wall or ceiling coverings of plastics, as defined in note 9 to this chapter
|
| 3918100000 |
Of polymers of vinyl chloride |
| 3918101000 |
Consisting of a support impregnated, coated or covered with poly(vinyl chloride) |
| 3918101010 |
For use in certain types of aircraft |
| 3918101090 |
Other |
| 3918109000 |
Other |
| 3918109010 |
For use in certain types of aircraft |
| 3918109090 |
Other |
| 3918900000 |
Of other plastics |
| 3918900010 |
For use in certain types of aircraft |
| 3918900090 |
Other |
UK Hs Code - 3919 : Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls
|
| 3919100000 |
In rolls of a width not exceeding 20 cm |
| 3919101000 |
Strips, the coating of which consists of unvulcanised natural or synthetic rubber |
| 3919101100 |
Strips, the coating of which consists of unvulcanised natural or synthetic rubber |
| 3919101100 |
Of plasticised poly(vinyl chloride) or of polyethylene |
| 3919101200 |
Strips, the coating of which consists of unvulcanised natural or synthetic rubber |
| 3919101200 |
Of poly(vinyl chloride) or of polyethylene |
| 3919101300 |
Of non-plasticised poly(vinyl chloride) |
| 3919101500 |
Of polypropylene |
| 3919101900 |
Other |
| 3919108090 |
Other |
| 3919109000 |
Other |
| 3919109010 |
Of regenerated cellulose |
| 3919109020 |
Of cellulose nitrates |
| 3919109090 |
Other |
| 3919900000 |
Other |
| 3919900010 |
For use in certain types of aircraft |
| 3919900019 |
Other |
| 3919903170 |
Poly(ethylene terephthalate) sheet, covered on one side with an antistatic layer and a hardcoat layer and on the other side with an adhesive layer and a release sheet, in rolls, for the manufacture of optical filters |
| 3919903175 |
Poly(ethylene terephthalate) film, with an adhesive strength of not more than 0,147N/25mm and an electrostatic discharge of not more than 500|V |
| 3919903180 |
Polyester film coated on both sides with an acrylic and/or rubber pressure sensitive adhesive put up in rolls of a width of 45.7|cm or more but not exceeding 78.5|cm (supplied with a release liner) |
| 3919903190 |
Other |
| 3919903500 |
Of epoxide resins |
| 3919903800 |
Other |
| 3919903820 |
Reflecting laminated sheet, consisting of a film of polycarbonate totally embossed on one side in a regular shaped pattern, covered on both sides with one or more layers of plastic material and on one side with an adhesive layer and a release sheet |
| 3919903890 |
Other |
| 3919903900 |
Other |
| 3919903910 |
Reflecting polyurethane sheeting |
| 3919903990 |
Other |
| 3919905000 |
Of addition polymerization products |
| 3919905010 |
For use in certain types of aircraft |
| 3919905091 |
Other |
| 3919905091 |
Laminated reflecting film of acrylic polymer, one layer of which is embossed with a prismatic pattern which reflects light back to the source of incident light (retro-reflecting), coated on one side with an adhesive |
| 3919905092 |
Polyvinyl chloride sheeting, of a thickness of less than 1|mm, coated with an adhesive in which are embedded hollow glass balls of a diameter not exceeding|100|micrometres |
| 3919905093 |
Reflecting sheeting of an acrylic polymer modified by melamine-formaldehyde, containing glass microspheres |
| 3919905094 |
Reflecting polyacrylic sheeting in which micropheres are embedded |
| 3919905096 |
Copolymers, solely of allyl alcohol with styrene, which have an acetyl value of not less than 175, in the form of film |
| 3919905099 |
Other |
| 3919906100 |
Of addition polymerisation products |
| 3919906100 |
Of plasticised poly(vinyl chloride) or of polyethylene |
| 3919906110 |
For use in certain types of aircraft |
| 3919906151 |
Other |
| 3919906190 |
Other |
| 3919906192 |
Other |
| 3919906192 |
Poly(vinyl chloride) sheeting, of a thickness of less than 1|mm, coated with an adhesive in which are embedded glass balls of a diameter not exceeding 100|?m |
| 3919906193 |
Adhesive film consisting of a base of a copolymer of ethylene and vinyl acetate (EVA) of a thickness of 70 µm or more and an adhesive part of acrylic tape of a thickness of 5 µm or more, for the protection of the surface of silicon discs |
| 3919906196 |
Reinforced polyethylene foam tape, coated on both sides with an acrylic micro channelled pressure sensitive adhesive and on one side a liner, with an application thickness of 0,38|mm or more but not more than 1,53|mm |
| 3919906197 |
Polarizer film, in rolls, consisting of a multilayered polyvinyl alcohol film, supported on either side by a triacetyl cellulose film, with a pressure sensitive adhesive and release film on one side |
| 3919906199 |
Other |
| 3919906900 |
Other |
| 3919906910 |
For use in certain types of aircraft |
| 3919906990 |
Other |
| 3919906992 |
Other |
| 3919906992 |
Other |
| 3919906992 |
Polyvinyl chloride sheeting, of a thickness of less than 1|mm, coated with an adhesive in which are embedded hollow glass balls of a diameter not exceeding|100|micrometres |
| 3919906992 |
Poly(vinyl chloride) sheeting, of a thickness of less than 1|mm, coated with an adhesive in which are embedded glass balls of a diameter not exceeding 100|?m |
| 3919906993 |
Adhesive film consisting of a base of a copolymer of ethylene and vinyl acetate (EVA) of a thickness of 70 µm or more and an adhesive part of acrylic tape of a thickness of 5 µm or more, for the protection of the surface of silicon discs |
| 3919906994 |
Reflecting laminated sheet consisting of a film of poly(methyl methacrylate) embossed on one side in a regular shaped pattern, a film of a polymer containing glass microspheres, an adhesive layer and a release sheet |
| 3919906995 |
Biaxially-oriented film of poly(methyl methacrylate), of a thickness of 50|?m or more but not exceeding 90|?m, whether or not covered on one side with an adhesive layer and a release sheet |
| 3919906998 |
Reflecting laminated sheet showing a regular pattern, consisting of a film of poly(methylmethacrylate), followed by a layer of acrylic polymer containing microprisms, a film of poly(methylmethacrylate), an adhesive layer and a release sheet |
| 3919906999 |
Other |
| 3919906999 |
Other |
| 3919909000 |
Other |
| 3919909010 |
Of regenerated cellulose |
| 3919909020 |
Of cellulose nitrates |
| 3919909090 |
Other |
UK Hs Code - 3920 : Other plates, sheets, film, foil and strip, of plastics, non-cellular and not reinforced, laminated, supported or similarly combined with other materials
|
| 3920100000 |
Of polymers of ethylene |
| 3920101100 |
Of a thickness not exceeding|0,10|mm and of a specific gravity of |
| 3920101100 |
Less than 0,94 |
| 3920101110 |
For use in certain types of aircraft |
| 3920101191 |
Other |
| 3920101191 |
Film of a copolymer of ethylene with methyl acrylate, having a thickness of not more than 0,05|mm, for the manufacture of disposable medical gloves |
| 3920101192 |
Polyethylene film, of a thickness of|20|micrometres or more but not exceeding|40|micrometres, for the production of photo-resist film used in the manufacture of semiconductors or printed circuits |
| 3920101199 |
Other |
| 3920101900 |
0,94|or more |
| 3920101910 |
For use in certain types of aircraft |
| 3920101991 |
Other |
| 3920101991 |
Film of a copolymer of ethylene with methyl acrylate, having a thickness of not more than 0,05|mm, for the manufacture of disposable medical gloves |
| 3920101992 |
Film of a thickness of not more than 1|mm of a copolymerization product of vinyl alcohol with ethylene containing no other polymerization products, with an extension at break (longitudinal or transversal) of not less than 65|% |
| 3920101999 |
Other |
| 3920102100 |
Of a thickness not exceeding|0,10|mm |
| 3920102100 |
Of polyethylene having a specific gravity of |
| 3920102100 |
Less than 0,94 |
| 3920102110 |
For use in certain types of aircraft |
| 3920102192 |
Other |
| 3920102192 |
Polyethylene film, of a thickness of|20|micrometres or more but not exceeding|40|micrometres, for the production of photo-resist film used in the manufacture of semiconductors or printed circuits |
| 3920102195 |
Film of polyethylene, of a thickness of 20|micrometres or more but not exceeding 45|micrometres, containing calcium carbonate in the mass, for the manufacture of napkins for babies or of sanitary towels or of tampons or of disposable surgical gowns |
| 3920102199 |
Other |
| 3920102200 |
Of a thickness not exceeding 0,125 mm |
| 3920102200 |
Of polyethylene having a specific gravity of |
| 3920102200 |
Less than 0,94 |
| 3920102210 |
For use in certain types of aircraft |
| 3920102292 |
Other |
| 3920102292 |
Polyethylene film, of a thickness of|20|micrometres or more but not exceeding|40|micrometres, for the production of photo-resist film used in the manufacture of semiconductors or printed circuits |
| 3920102295 |
Film of polyethylene, of a thickness of 20 micrometres or more but not exceeding 45 micrometres, containing calcium carbonate in the mass, for the manufacture of napkins for babies or of sanitary towels or of tampons or of disposable surgical gowns |
| 3920102296 |
Film of a thickness not exceeding 0,20|mm, of a blend of polyethylene and a copolymer of ethylene with oct-1-ene, embossed in a regular rhomboidal pattern, for coating both sides of a layer of unvulcanized rubber |
| 3920102299 |
Other |
| 3920102300 |
Of a thickness not exceeding 0,125 mm |
| 3920102300 |
Of polyethylene having a specific gravity of |
| 3920102300 |
Less than 0,94 |
| 3920102300 |
Polyethylene film, of a thickness of 20 micrometres or more but not exceeding 40 micrometres, for the production of photoresist film used in the manufacture of semiconductors or printed circuits |
| 3920102400 |
Other |
| 3920102400 |
Stretch film, not printed |
| 3920102400 |
Not printed |
| 3920102400 |
Stretch film, not printed |
| 3920102410 |
For use in certain types of aircraft |
| 3920102410 |
For use in certain types of aircraft |
| 3920102490 |
Other |
| 3920102490 |
Other |
| 3920102500 |
Other |
| 3920102500 |
Other |
| 3920102505 |
For use in certain types of aircraft |
| 3920102510 |
For use in certain types of aircraft |
| 3920102510 |
Other |
| 3920102510 |
Film of a thickness not exceeding 0,20 mm, of a blend of polyethylene and a copolymer of ethylene with oct-1-ene, embossed in a regular rhomboidal pattern, for coating both sides of a layer of unvulcanized rubber |
| 3920102520 |
Other |
| 3920102520 |
Film of polyethylene, of a thickness of 20 micrometres or more but not exceeding 45 micrometres, containing calcium carbonate in the mass, for the manufacture of napkins for babies or of sanitary towels or of tampons or of disposable surgical gowns |
| 3920102520 |
Film of polyethylene, of a kind used for typewriter ribbon |
| 3920102530 |
Film of a thickness not exceeding 0,20|mm, of a blend of polyethylene and a copolymer of ethylene with oct-1-ene, embossed in a regular rhomboidal pattern, for coating both sides of a layer of unvulcanized rubber |
| 3920102590 |
Other |
| 3920102590 |
Other |
| 3920102600 |
Other |
| 3920102610 |
For use in certain types of aircraft |
| 3920102620 |
Other |
| 3920102620 |
Film of polyethylene, of a thickness of 20|?m or more but not exceeding 45|?m, containing calcium carbonate in the mass, for the manufacture of napkins for babies or of sanitary towels or of tampons or of disposable surgical gowns |
| 3920102630 |
Other |
| 3920102630 |
Film of a thickness not exceeding 0,20|mm, of a blend of polyethylene and a copolymer of ethylene with oct-1-ene, embossed in a regular rhomboidal pattern, for coating both sides of a layer of unvulcanized rubber |
| 3920102640 |
Film of polyethylene, of a kind used for typewriter ribbon |
| 3920102690 |
Other |
| 3920102700 |
Printed |
| 3920102710 |
For use in certain types of aircraft |
| 3920102790 |
Other |
| 3920102800 |
0,94 or more |
| 3920102810 |
For use in certain types of aircraft |
| 3920102890 |
Other |
| 3920102891 |
Other |
| 3920102891 |
Other |
| 3920102891 |
Film of a copolymer of ethylene with methyl acrylate, having a thickness of not more than 0,05|mm, for the manufacture of disposable medical gloves |
| 3920102893 |
Polyethylene film with a thickness of 23 ?m or more but not exceeding 27 ?m, with a weight of 32 g/m2 or more but not exceeding 42 g/m2 and with a water vapour permeability of not less than 900g/m2 per day |
| 3920102899 |
Other |
| 3920102899 |
Other |
| 3920102900 |
0,94|or more |
| 3920102910 |
For use in certain types of aircraft |
| 3920102991 |
Other |
| 3920102991 |
Film of a copolymer of ethylene with methyl acrylate, having a thickness of not more than 0,05|mm, for the manufacture of disposable medical gloves |
| 3920102992 |
Film of a thickness of not more than 1|mm of a copolymerization product of vinyl alcohol with ethylene containing no other polymerization products, with an extension at break (longitudinal or transversal) of not less than 65|% |
| 3920102999 |
Other |
| 3920104000 |
Other |
| 3920104010 |
For use in certain types of aircraft |
| 3920104090 |
Other |
| 3920104090 |
Other |
| 3920104091 |
Other |
| 3920104099 |
Other |
| 3920105000 |
Other |
| 3920105010 |
For use in certain types of aircraft |
| 3920105090 |
Other |
| 3920108000 |
Of a thickness exceeding 0,125 mm |
| 3920108010 |
For use in certain types of aircraft |
| 3920108091 |
Other |
| 3920108093 |
Other |
| 3920108095 |
Film of a thickness not exceeding 0,20|mm, of a blend of polyethylene and a copolymer of ethylene with oct-1-ene, embossed in a regular rhomboidal pattern, for coating both sides of a layer of unvulcanized rubber |
| 3920108099 |
Other |
| 3920108100 |
Of a thickness exceeding 0,125 mm |
| 3920108900 |
Other |
| 3920108910 |
For use in certain types of aircraft |
| 3920108920 |
Other |
| 3920108920 |
Film of a thickness not exceeding 0,20|mm, of a blend of polyethylene and a copolymer of ethylene with oct-1-ene, embossed in a regular rhomboidal pattern, for coating both sides of a layer of unvulcanized rubber |
| 3920108925 |
Adhesive film consisting of a base of a copolymer of ethylene and
vinyl acetate (EVA) of a thickness of 70 ?m or more and an adhesive
part of acrylic type of a thickness of 5 ?m or more, for the protection
of the surface of silicon discs |
| 3920108925 |
Adhesive film consisting of a base of a copolymer of ethylene and vinyl acetate (EVA) of a thickness of 70 µm or more and an adhesive part of acrylic tape of a thickness of 5 µm or more, for the protection of the surface of silicon discs |
| 3920108930 |
Polyethylene sheet, of a thickness of 0,025|mm or more but not exceeding 3|mm, of an elongation at break of 100|% or more but not exceeding 1|100|% (as determined by the ASTM D 638 and 882 methods), in rolls of a width of 4,57|m, 4,9|m, 7,01|m or 9,3|m |
| 3920108940 |
Composite sheet containing an acrylic coating and laminated to a high-density polyethylene layer, of a total thickness of 0.8|mm or more but not exceeding 1.2|mm |
| 3920108990 |
Other |
| 3920109000 |
Of a thickness exceeding|0,10|mm |
| 3920109010 |
For use in certain types of aircraft |
| 3920109091 |
Other |
| 3920109092 |
Film of a thickness of not more than 1|mm of a copolymerization product of vinyl alcohol with ethylene containing no other polymerization products, with an extension at break (longitudinal or transversal) of not less than 65|% |
| 3920109095 |
Film of a thickness not exceeding 0,20|mm, of a blend of polyethylene and a copolymer of ethylene with oct-1-ene, embossed in a regular rhomboidal pattern, for coating both sides of a layer of unvulcanized rubber |
| 3920109099 |
Other |
| 3920200000 |
Of polymers of propylene |
| 3920201000 |
Of a thickness of less than 0,05|mm |
| 3920201010 |
For use in certain types of aircraft |
| 3920201090 |
Other |
| 3920202100 |
Of a thickness not exceeding 0,10 mm |
| 3920202100 |
Biaxially oriented |
| 3920202110 |
For use in certain types of aircraft |
| 3920202120 |
Film of polymers of polypropylene, biaxially oriented, of a thickness of 3,5 ?m or more but less than 15 ?m, of a width of 490 mm or more but not
exceeding 620 mm, for the production of film capacitors |
| 3920202130 |
Biaxially oriented polypropylene film with a coextruded layer of polyethylene on one side and a total thickness of 11.5|µm or more but not more than 13.5|µm |
| 3920202190 |
Other |
| 3920202900 |
Other |
| 3920202910 |
For use in certain types of aircraft |
| 3920202990 |
Other |
| 3920202990 |
Other |
| 3920202991 |
Other |
| 3920202991 |
Other |
| 3920202991 |
Microporous polypropylene film of a thickness not exceeding 30 micrometres |
| 3920202999 |
Other |
| 3920202999 |
Other |
| 3920205000 |
Of a thickness of 0,05|mm to 0,10|mm |
| 3920205010 |
For use in certain types of aircraft |
| 3920205090 |
Other |
| 3920207100 |
Of a thickness exceeding 0,10|mm |
| 3920207100 |
Strip of a width exceeding 5|mm but not exceeding 20|mm of the kind used for packaging |
| 3920207100 |
Decorative strip |
| 3920207900 |
Other |
| 3920208000 |
Of a thickness exceeding 0,10 mm |
| 3920208010 |
For use in certain types of aircraft |
| 3920208092 |
Other |
| 3920300090 |
Other |
| 3920410000 |
Of polymers of vinyl chloride |
| 3920410000 |
Rigid |
| 3920411000 |
Of a thickness not exceeding|1|mm |
| 3920411010 |
For use in certain types of aircraft |
| 3920411090 |
Other |
| 3920411100 |
Non-plasticized, of a thickness |
| 3920411100 |
Not exceeding 1 mm |
| 3920411110 |
For use in certain types of aircraft |
| 3920411190 |
Other |
| 3920411900 |
Exceeding 1 mm |
| 3920411910 |
For use in certain types of aircraft |
| 3920411990 |
Other |
| 3920419000 |
Of a thickness exceeding|1|mm |
| 3920419010 |
For use in certain types of aircraft |
| 3920419090 |
Other |
| 3920419100 |
Plasticized, of a thickness |
| 3920419100 |
Not exceeding 1 mm |
| 3920419110 |
For use in certain types of aircraft |
| 3920419190 |
Other |
| 3920419900 |
Exceeding 1 mm |
| 3920419910 |
For use in certain types of aircraft |
| 3920419990 |
Other |
| 3920420000 |
Flexible |
| 3920421000 |
Of a thickness not exceeding|1|mm |
| 3920421010 |
For use in certain types of aircraft |
| 3920421091 |
Other |
| 3920421091 |
Reflecting polyvinyl chloride sheeting, wholly embossed on one side in a regular pyramidal pattern, for use in the manufacture of safety clothing and accessories, satchels and similar articles |
| 3920421092 |
Polyvinyl choride film, biaxially orientated, of a thickness of 10|micrometres or more but not exceeding 20|micrometres |
| 3920421099 |
Other |
| 3920421100 |
Non-plasticized, of a thickness |
| 3920421100 |
Not exceeding 1 mm |
| 3920421110 |
For use in certain types of aircraft |
| 3920421192 |
Other |
| 3920421192 |
Reflecting sheeting, consisting solely of a single layer of polyvinyl chloride, wholly embossed on one side in a regular pyramidal pattern |
| 3920421199 |
Other |
| 3920421900 |
Exceeding 1 mm |
| 3920421910 |
For use in certain types of aircraft |
| 3920421990 |
Other |
| 3920429000 |
Of a thickness exceeding|1|mm |
| 3920429010 |
For use in certain types of aircraft |
| 3920429090 |
Other |
| 3920429100 |
Plasticized, of a thickness |
| 3920429100 |
Not exceeding 1 mm |
| 3920429110 |
For use in certain types of aircraft |
| 3920429192 |
Other |
| 3920429192 |
Reflecting sheeting, consisting solely of a single layer of polyvinyl chloride, wholly embossed on one side in a regular pyramidal pattern |
| 3920429194 |
Polyvinyl chloride sheet, with relief printing, of a kind used in the templates for textile printing |
| 3920429199 |
Other |
| 3920429900 |
Exceeding 1 mm |
| 3920429910 |
For use in certain types of aircraft |
| 3920429990 |
Other |
| 3920430000 |
Of polymers of vinyl chloride |
| 3920430000 |
Containing by weight not less than 6 % of plasticisers |
| 3920431000 |
Of a thickness not exceeding 1 mm |
| 3920431010 |
For use in certain types of aircraft |
| 3920431091 |
Other |
| 3920431091 |
Reflecting sheeting, consisting solely of a single layer of poly(vinyl chloride), wholly embossed on one side in a regular pyramidal pattern |
| 3920431092 |
Other |
| 3920431099 |
Other |
| 3920439000 |
Of a thickness exceeding 1 mm |
| 3920439010 |
For use in certain types of aircraft |
| 3920439090 |
Other |
| 3920490000 |
Other |
| 3920491000 |
Of a thickness not exceeding 1 mm |
| 3920491010 |
For use in certain types of aircraft |
| 3920491091 |
Other |
| 3920491091 |
Reflecting sheeting, consisting solely of a single layer of poly(vinyl chloride), wholly embossed on one side in a regular pyramidal pattern |
| 3920491092 |
Reflecting laminated sheet, consisting of a film of poly(vinyl chloride) and a film of an other plastic totally embossed in a regular pyramidal pattern, covered on one side with a release sheet |
| 3920491093 |
Other |
| 3920491099 |
Other |
| 3920499000 |
Of a thickness exceeding 1 mm |
| 3920499010 |
For use in certain types of aircraft |
| 3920499090 |
Other |
| 3920510000 |
Of acrylic polymers |
| 3920510000 |
Of poly(methyl methacrylate) |
| 3920510010 |
Poly(methyl methacrylate) plate, with an antistatic coating, of dimensions of 738|!x!|972|mm (+/-|1,5|mm) |
| 3920510020 |
Plate of poly(methyl methacrylate) containing aluminium trihydroxide, of a thickness of 3,5|mm or more but not exceeding 19|mm |
| 3920510030 |
Biaxially-oriented film of poly(methyl methacrylate), of a thickness of 50|?m or more but not exceeding 90|?m, whether or not covered on one side with an adhesive layer and a release sheet |
| 3920510040 |
Sheets of polymethylmethacrylate plastic complying with standards EN 4364|(MIL-P-5425E), EN 4365|(MIL-P-8184) and EN 4366|(MIL-PRF-25690) |
| 3920510090 |
Other |
| 3920590000 |
Other |
| 3920590010 |
Copolymer of acrylic and methacrylic esters, in the form of film of a thickness not exceeding|150|micrometres |
| 3920590020 |
Reflecting sheeting of an acrylic polymer modified by melamine-formaldehyde, containing glass microspheres |
| 3920590030 |
Reflecting polyacrylic sheeting in which microspheres are embedded |
| 3920590040 |
Laminated reflecting film of acrylic polymer, one layer of which is embossed with a prismatic pattern which reflects light back to the source of incident light (retro-reflecting), coated on one side with an adhesive |
| 3920590090 |
Other |
| 3920591000 |
Copolymer of acrylic and methacrylic esters, in the form of film of a thickness not exceeding 150 micrometres |
| 3920599000 |
Other |
| 3920599010 |
Non-cellular and non-laminated sheet of modified copolymer of acrylonitrile-methyl acrylate with a thickness of 1.0|mm or more but not more than 1.3|mm, put up in rolls |
| 3920599090 |
other |
| 3920610000 |
Of polycarbonates, alkyd resins, polyallyl esters or other polyesters |
| 3920610000 |
Of polycarbonates |
| 3920610010 |
Polycarbonate film of a thickness not exceeding 15|?m, for the manufacture of film capacitors |
| 3920610090 |
Other |
| 3920620000 |
Of poly(ethylene terephthalate) |
| 3920620001 |
Reflecting polyester sheeting in which microspheres are embedded |
| 3920620002 |
Reflecting polyester sheeting embossed in a regular pyramidal pattern, for use in the manufacture of safety clothing and accessories, satchels and similar articles |
| 3920620003 |
Polyethylene terephthalate film, of a thickness of|72|micrometres or more but not exceeding|79|micraometres, for the manufacture of flexible magnetic disks (floppy disks) |
| 3920620004 |
Film of polyethylene terephthalate, of a thickness of less than 10 micrometers, for the manufacture of video-cassettes with a playing-time of 300 minutes at a tape-speed of 24|mm per second |
| 3920620005 |
Polyethylene terephthalate film, dyed in the mass, of a thickness not exceeding|25|micrometres and metallized on one side |
| 3920620006 |
Polyethylene terephtalate film, having a thickness of not less than 22|and not more than 25|micrometres, for use in the manufacture of magnetic cassette tapes |
| 3920620007 |
Polyester film of a thickness not exceeding|70|micrometres, coated on one side with a substance which becomes coloured in the presence of saticyclic acid at a temperature not exceeding|100!o!C |
| 3920620008 |
Polyester film of a thickness not exceeding|10|micrometres, coated on one side with salicylic acid |
| 3920620009 |
Polyethylene terephthalate film, of a thickness of 100|micrometres or more but not exceeding 150|micrometres, for use in the manufacture of photopolymer printing plates |
| 3920620011 |
Reflecting laminated sheeting, metallized, consisting of one sheet of polyester and at least another sheet of polyester or other plastic material and coated on one side with an adhesive, whether or not protected by a release sheet |
| 3920620012 |
Transparent film consisting of polyester coated with a layer of indium and silver |
| 3920620013 |
Reflecting polyester sheeting embossed in a regular pyramidal pattern, for the manufacture of safety stickers and badges, safety clothing and accessories therof, or of school satchels, bags or similiar containers |
| 3920620014 |
Iridescent film of polyester with polyethylene |
| 3920620014 |
Polyethylene terephthalate film, of a thickness of 20|micrometres or more but not exceeding 30|micrometres, coated on one side with silicone, for use in the manufacture of window safety-film |
| 3920620091 |
Other |
| 3920620091 |
Films in rolls or in strips, for cinematography or photography |
| 3920620099 |
Other |
| 3920621000 |
Of a thickness not exceeding 0,35 mm |
| 3920621010 |
Polyethylene terephthalate film, of a thickness of less than 11 micrometres, for the manufacture of audiodigital tapes for cassettes |
| 3920621015 |
Polyethylene terephthalate film, of a thickness of|72|micrometres or more but not exceeding|79|micraometres, for the manufacture of flexible magnetic disks |
| 3920621020 |
Polyethylene terephtalate film, not coated with an adhesive, of a thickness not exceeding 25 micrometres, either:- only dyed in the mass, or- dyed in the mass and metallized on one side |
| 3920621025 |
Polyester film of a thickness not exceeding|70|micrometres, coated on one side with a substance which becomes coloured in the presence of saticyclic acid at a temperature not exceeding|100!o!C |
| 3920621030 |
Reflecting laminated sheeting, metallized, consisting of one sheet of polyester and at least another sheet of polyester or other plastic material and coated on one side with an adhesive, whether or not protected by a release sheet |
| 3920621035 |
Polyethylene terephthalate film, of a thickness of 100|micrometres or more but not exceeding 150|micrometres, for use in the manufacture of photopolymer printing plates |
| 3920621040 |
Reflecting polyester sheeting embossed in a regular pyramidal pattern, for the manufacture of safety stickers and badges, safety clothing and accessories thereof, or of school satchels, bags or similar containers |
| 3920621045 |
Film of polyethylene terephthalate only, of a total thickness not exceeding 120 micrometres, consisting of one or two layers each containing a colouring and/or UV-absorbing material throughout the mass, uncoated with an adhesive or any other material |
| 3920621050 |
Polyethylene terephthalate film, of a thickness of 20 micrometres or more but not exceeding 30 micrometres, coated on one side with silicone, for use in the manufacture of window film |
| 3920621085 |
Polyethylene terephthalate film, 9 micrometres thick (+/- 0,3 micrometres) for the manufacture of products falling within subheading 8523 13 00 |
| 3920621091 |
Other |
| 3920621091 |
Films in rolls or in strips, for cinematography or photography |
| 3920621099 |
Other |
| 3920621099 |
Other |
| 3920621100 |
Of a thickness not exceeding 0,35|mm |
| 3920621100 |
Poly(ethylene terephthalate) film, of a thickness of 72|micrometres or more but not exceeding 79|micrometres, for the manufacture of flexible magnetic disks |
| 3920621200 |
Of a thickness not exceeding 0,35 mm |
| 3920621300 |
Poly(ethylene terephthalate) film, of a thickness of 100|micrometres or more but not exceeding 150|micrometres, for the manufacture of photopolymer printing plates |
| 3920621900 |
Other |
| 3920621901 |
Coextruded opaque sheet of poly(ethylene terephthalate), of a thickness of 50|?m or more but not exceeding 350|?m, consisting especially of a layer containing carbon black |
| 3920621901 |
Consigned from Brazil; consigned from Israel |
| 3920621903 |
Other |
| 3920621904 |
Poly(ethylene terephthalate) film, of a thickness of less than 11|?m, for the manufacture of audiodigital tapes for cassettes |
| 3920621904 |
Consigned from Brazil; consigned from Israel |
| 3920621905 |
Coextruded opaque sheet of poly(ethylene terephthalate), of a thickness of 50|?m or more but not exceeding 350|?m, consisting especially of a layer containing carbon black |
| 3920621906 |
Other |
| 3920621907 |
Poly(ethylene terephtalate) film, not coated with an adhesive, of a thickness not exceeding 25|?m, either: only dyed in the mass, or dyed in the mass and metallized on one side |
| 3920621907 |
Consigned from Brazil; consigned from Israel |
| 3920621909 |
Other |
| 3920621910 |
Poly(ethylene terephthalate) film, of a thickness of less than 11|?m, for the manufacture of audiodigital tapes for cassettes |
| 3920621911 |
Film of poly(ethylene terephthalate) only, of a total thickness not exceeding 120|?m, consisting of one or two layers each containing a colouring and/or UV-absorbing material throughout the mass, uncoated with an adhesive or any other material |
| 3920621911 |
Consigned from Brazil; consigned from Israel |
| 3920621913 |
Other |
| 3920621914 |
Poly(ethylene terephthalate) film, of a thickness of 20|?m or more but not exceeding 150|?m, coated on one side with silicone, for use in the manufacture of window film |
| 3920621914 |
Consigned from Brazil; consigned from Israel |
| 3920621915 |
Poly(ethylene terephtalate) film, not coated with an adhesive, of a thickness not exceeding 25|?m, either: only dyed in the mass, or dyed in the mass and metallized on one side |
| 3920621916 |
Other |
| 3920621917 |
Consigned from Brazil; consigned from Israel |
| 3920621919 |
Other |
| 3920621920 |
Reflecting polyester sheeting embossed in a pyramidal pattern, for the manufacture of safety stickers and badges, safety clothing and accessories thereof, or of school satchels, bags or similar containers |
| 3920621920 |
Reflecting polyester sheeting embossed in a pyramidal pattern, for the manufacture of safety stickers and badges, safety clothing and accessories thereof, or of school satchels, bags or similar containers |
| 3920621921 |
Consigned from Brazil; consigned from Israel |
| 3920621923 |
Other |
| 3920621924 |
Consigned from Brazil; consigned from Israel |
| 3920621925 |
Film of poly(ethylene terephthalate) only, of a total thickness not exceeding 120|?m, consisting of one or two layers each containing a colouring and/or UV-absorbing material throughout the mass, uncoated with an adhesive or any other material |
| 3920621926 |
Other |
| 3920621927 |
Consigned from Brazil; consigned from Israel |
| 3920621929 |
Other |
| 3920621930 |
Poly(ethylene terephthalate) film, of a thickness of 20|?m or more but not exceeding 30|?m, coated on one side with silicone, for use in the manufacture of window film |
| 3920621931 |
Consigned from Brazil; consigned from Israel |
| 3920621933 |
Other |
| 3920621934 |
Film of poly(ethylene terephthalate), coated on one side with a layer of modified polyester, of a thickness of 20|?m (+/-|0,7|?m) or of 30|?m (+/-|0,9|?m), for the manufacture of audio magnetic tapes of a total thickness of 33|?m or more |
| 3920621934 |
Consigned from Brazil; consigned from Israel |
| 3920621936 |
Other |
| 3920621937 |
Poly(ethylene terephthalate) film, of a thickness not exceeding 12|?m, coated on one side with a layer of aluminium oxide of a thickness not exceeding 35|nm |
| 3920621937 |
Consigned from Brazil; consigned from Israel |
| 3920621939 |
Other |
| 3920621941 |
Consigned from Brazil; consigned from Israel |
| 3920621943 |
Other |
| 3920621944 |
Poly(ethylene terephthalate) film, of a thickness not exceeding 19|?m or of a weight of 20|g/m$2 or more but not exceeding 26,7|g/m$2, for use in the manufacture of photo-resist film |
| 3920621944 |
Consigned from Brazil; consigned from Israel |
| 3920621946 |
Other |
| 3920621947 |
Film of poly(ethylene terephthalate), coated on both sides with a layer of epoxy acrylic resin, of a total thickness of 37|?m (+/-|3|?m) |
| 3920621947 |
Consigned from Brazil; consigned from Israel |
| 3920621949 |
Other |
| 3920621951 |
Consigned from Brazil; consigned from Israel |
| 3920621953 |
Other |
| 3920621954 |
Matt film of poly(ethylene terephthalate), of a specular gloss of 15 measured at an angle of 45|° and 18 measured at an angle of 60|° using a glossmeter (as determined by the ISO 2813:2000 method) and a width of 1|600|mm or more |
| 3920621954 |
Consigned from Brazil; consigned from Israel |
| 3920621956 |
Other |
| 3920621957 |
Film of white poly(ethylene terephthalate), dyed in the mass, of a thickness of 185|?m or more but not exceeding 253|?m, coated on both sides with an antistatic layer |
| 3920621957 |
Consigned from Brazil; consigned from Israel |
| 3920621959 |
Other |
| 3920621960 |
Film of poly(ethylene terephthalate), coated on one side with a layer of modified polyester, of a thickness of 20|?m (+/-|0,7|?m) or of 30|?m (+/-|0,9|?m), for the manufacture of audio magnetic tapes of a total thickness of 33|?m or more |
| 3920621961 |
Consigned from Brazil; consigned from Israel |
| 3920621962 |
Poly(ethylene terephthalate) film, of a thickness not exceeding 12|?m, coated on one side with a layer of aluminium oxide of a thickness not exceeding 35|nm |
| 3920621963 |
Other |
| 3920621965 |
Polyethylene terephthalate film, 9 micrometres thick (+/- 0,3 micrometres) for the manufacture of products falling within subheading 8523 13 00 |
| 3920621965 |
Poly(ethylene terephthalate) film, of a thickness not exceeding 19|?m or of a weight of 20|g/m$2 or more but not exceeding 26,7|g/m$2, for use in the manufacture of photo-resist film |
| 3920621967 |
Poly(ethylene terephthalate) film, coated with among other a scratch resistant layer based on polyacrylate and a thermoadhesive layer, of a nominal width of 790|mm and a total thickness of 23|?m or more but not exceeding 26|?m |
| 3920621967 |
Consigned from Brazil; consigned from Israel |
| 3920621969 |
Other |
| 3920621970 |
Film of poly(ethylene terephthalate), coated on both sides with a layer of epoxy acrylic resin, of a total thickness of 37|?m (+/-|3|?m) |
| 3920621973 |
Iridescent film of polyester and poly(methyl methacrylate) |
| 3920621974 |
Consigned from Brazil; consigned from Israel |
| 3920621975 |
Consigned from Brazil; consigned from Israel |
| 3920621976 |
Other |
| 3920621977 |
Consigned from Brazil; consigned from Israel |
| 3920621977 |
Other |
| 3920621978 |
Other |
| 3920621980 |
Poly(ethylene terephtalate) film of a thickness of not more than 20|µm, coated on both sides with a gas barrier layer consisting of a polymeric matrix in which silica has been dispersed and of a thickness of not more than 2|µm |
| 3920621980 |
Matt film of poly(ethylene terephthalate), of a specular gloss of 15 measured at an angle of 45|° and 18 measured at an angle of 60|° using a glossmeter (as determined by the ISO 2813:2000 method) and a width of 1|600|mm or more |
| 3920621980 |
Consigned from Brazil; consigned from Israel |
| 3920621981 |
Film of white poly(ethylene terephthalate), dyed in the mass, of a thickness of 185|?m or more but not exceeding 253|?m, coated on both sides with an antistatic layer |
| 3920621982 |
Other |
| 3920621987 |
Poly(ethylene terephthalate) film, coated with among other a scratch resistant layer based on polyacrylate and a thermoadhesive layer, of a nominal width of 3920621990 |
| 3920621991 |
Other |
| 3920621991 |
Polyethylene terephtalate (PET) film |
| 3920621992 |
Other |
| 3920621992 |
Polyethylene terephtalate (PET) film |
| 3920621992 |
Consigned from Brazil; consigned from Israel |
| 3920621994 |
Other |
| 3920621999 |
Other |
| 3920629000 |
Of a thickness exceeding 0,35 mm |
| 3920629010 |
Reflecting laminated sheeting, metallized, consisting of one sheet of polyester and at least another sheet of polyester or other plastic material and coated on one side with an adhesive, whether or not protected by a release sheet |
| 3920629020 |
Reflecting polyester sheeting embossed in a pyramidal pattern, for the manufacture of safety stickers and badges, safety clothing and accessories thereof, or of school satchels, bags or similar containers |
| 3920629030 |
Film of poly(ethylene terephthalate), of a thickness of 500|?m (+/-|25|?m) |
| 3920629031 |
Film of poly(ethylene terephthalate), of a thickness of 500|?m (+/-|25|?m) |
| 3920629031 |
Consigned from Brazil; consigned from Israel |
| 3920629033 |
Other |
| 3920629090 |
Other |
| 3920629091 |
Other |
| 3920629091 |
Other |
| 3920629091 |
Films in rolls or in strips, for cinematography or photography |
| 3920629091 |
Polyethylene terephtalate (PET) film |
| 3920629092 |
Other |
| 3920629092 |
Polyethylene terephtalate (PET) film |
| 3920629092 |
Polyethylene terephtalate (PET) film |
| 3920629092 |
Consigned from Brazil; consigned from Israel |
| 3920629092 |
Consigned from Brazil; consigned from Israel |
| 3920629094 |
Other |
| 3920629094 |
Other |
| 3920629099 |
Other |
| 3920629099 |
Other |
| 3920629099 |
Other |
| 3920630000 |
Of unsaturated polyesters |
| 3920630010 |
Reflecting polyester sheeting in which microspheres are embedded |
| 3920630020 |
Reflecting polyester sheeting embossed in a regular pyramidal pattern, for use in the manufacture of safety clothing and accessories, satchels and similar articles |
| 3920630030 |
Reflecting polyester sheeting embossed in a pyramidal pattern, for the manufacture of safety stickers and badges, safety clothing and accessories thereof, or of school satchels, bags or similar containers |
| 3920630050 |
Polyester film of a thickness not exceeding|70|micrometres, coated on one side with a substance which becomes coloured in the presence of salicyclic acid at a temperature not exceeding|100$oC |
| 3920630060 |
Polyester film of a thickness not exceeding|10|micrometres, coated on one side with salicylic acid |
| 3920630080 |
Transparent film consisting of polyester coated with a layer of indium and silver |
| 3920630090 |
Other |
| 3920690000 |
Of other polyesters |
| 3920690010 |
Reflecting polyester sheeting in which microspheres are embedded |
| 3920690020 |
Reflecting polyester sheeting embossed in a regular pyramidal pattern, for use in the manufacture of safety clothing and accessories, satchels and similar articles |
| 3920690020 |
Film of poly(ethylene naphthalene-2,6-dicarboxylate) |
| 3920690030 |
Reflecting polyester sheeting embossed in a pyramidal pattern, for the manufacture of safety stickers and badges, safety clothing and accessories thereof, or of school satchels, bags or similar containers |
| 3920690040 |
Iridescent film of polyester and poly(methyl methacrylate) |
| 3920690050 |
Polycondensation product of terephthalic acid with a mixture of cyclohex-1,4-ylenedimethanol and ethane-1,2-diol, in the form of a film |
| 3920690060 |
Iridescent film of polyester with polyethylene |
| 3920690060 |
Film of a copolymer of ethylene terephthalate and ethylene isophthalate, of a thickness not exceeding 2|?m |
| 3920690070 |
Transparent film consisting of polyester coated with a layer of indium and silver |
| 3920690070 |
Film of a copolymer of ethane-1,2-diol and naphthalene-2,6-dicarboxylic acid, of a thickness of less than 10|micrometres, for the manufacture of video-cassettes with a playing-time of 300|minutes at a tape-speed of 24|mm per second |
| 3920690090 |
Other |
| 3920710000 |
Of cellulose or its chemical derivatives |
| 3920710000 |
Of regenerated cellulose |
| 3920711000 |
Sheets, film or strip, coiled or not, of a thickness of less than 0,75|mm |
| 3920711100 |
Sheets, film or strip, coiled or not, of a thickness of less than 0,75|mm |
| 3920711100 |
Not printed |
| 3920711900 |
Printed |
| 3920719000 |
Other |
| 3920720000 |
Of vulcanised fibre |
| 3920730000 |
Of cellulose acetate |
| 3920731000 |
Film in rolls or in strips, for cinematography or photography |
| 3920735000 |
Sheets, film or strip, coiled or not, of a thickness of less than 0,75|mm |
| 3920738000 |
Other |
| 3920739000 |
Other |
| 3920790000 |
Of other cellulose derivatives |
| 3920791000 |
Of vulcanised fibre |
| 3920799000 |
Other |
| 3920799010 |
Cellulose acetyl butyrate film, whether or not combined with a polycarbonate layer, of a thickness not exceeding 0.81|mm containing a micro-louvre with a typical viewing angle of 30|degrees measured on each side of the surface normal |
| 3920799090 |
Other |
| 3920910000 |
Of other plastics |
| 3920910000 |
Of poly(vinyl butyral) |
| 3920910010 |
For use in certain types of aircraft |
| 3920910091 |
Other |
| 3920910091 |
Poly(vinyl butyral) film having a graduated coloured band |
| 3920910092 |
Plasticized film of polyvinyl butyral, containing by weight: either 14,5|% or more but not more than 17,5|% of dihexyl adipate, or 14,5|% or more but not more than 28,5|% of dibutyl sebacate |
| 3920910092 |
Plasticized film of polyvinyl butyral, containing by weight: either 14,5|% or more but not more than 17,5|% of dihexyl adipate, or 14,5|% or more but not more than 28,5|% of dibutyl sebacate |
| 3920910094 |
Co-extruded trilayer poly(vinyl butyral) film |
| 3920910094 |
Without a graduated colour band containing by weight 29% or more but not more than 31% of 2,2’-ethylenedioxydiethyl bis(2-ethylhexanoate) as a plasticiser |
| 3920910095 |
With a graduated colour band containing by weight 29 % or more but not more than 31 % of 2,2'-ethylenedioxydiethyl bis(2-ethylhexanoate) as a plasticiser |
| 3920910099 |
Other |
| 3920920000 |
Of polyamides |
| 3920920010 |
Film consisting of poly(epsilon-caprolactam) blended with either not more than|10% by weight of polyethylene or not more than 10% weight of a copolymer of ethylene with vinyl acetate |
| 3920920020 |
Poly(epsilon-caprolactam) film having a softening point of not less than 200!o!C |
| 3920920021 |
Poly(epsilon-caprolactam) film, of a softening point of|200$oC or more and containing|130|mg/kg or more but not more than|170mg/kg, of copper, for use during the bonding together, under heat and vacuum, of components of composite articles |
| 3920920030 |
Polyamide film of a thickness of not more than 20|µm, coated on both sides with a gas barrier layer which consists of a polymeric matrix in which silica has been dispersed and of a thickness not exceeding 2|µm |
| 3920920089 |
Other |
| 3920920090 |
Other |
| 3920930000 |
Of amino-resins |
| 3920940000 |
Of phenolic resins |
| 3920990000 |
Of other plastics |
| 3920991100 |
Of condensation or rearrangement polymerization products, whether or not chemically modified |
| 3920991100 |
Of epoxide resins |
| 3920991900 |
Other |
| 3920991910 |
Polyimide sheet and strip |
| 3920991910 |
Polyimide sheet and strip, uncoated or coated or covered solely with plastic |
| 3920991911 |
Polyimide sheet and strip |
| 3920991911 |
Uncoated or coated or covered solely with plastic |
| 3920991919 |
Other |
| 3920991920 |
Reflecting polyurethane sheeting |
| 3920991990 |
Other |
| 3920992100 |
Of condensation or rearrangement polymerisation products, whether or not chemically modified |
| 3920992100 |
Polyimide sheet and strip, uncoated, or coated or covered solely with plastic |
| 3920992800 |
Other |
| 3920992810 |
Reflecting sheet of metallised polyurethane, containing glass beads, coated with a hot-melt adhesive layer, covered on one or both sides with a release sheet, in rolls of a width of 1|020|mm (+/-|20|mm), for slitting into safety clothing reflecting strip |
| 3920992850 |
Thermoplastic polyurethane film, of a thickness of 250|?m or more but not more than 350|?m, covered on one side with a removable protective film |
| 3920992890 |
Other |
| 3920992900 |
Other |
| 3920992910 |
Reflecting sheet of metallised polyurethane, containing glass beads, coated with a hot-melt adhesive layer, covered on one or both sides with a release sheet, in rolls of a width of 1|020|mm (+/-|20|mm), for slitting into safety clothing reflecting strip |
| 3920992990 |
Other |
| 3920995000 |
Of addition polymerization products |
| 3920995010 |
For use in certain types of aircraft |
| 3920995021 |
Other |
| 3920995021 |
Polyvinyl fluoride sheet |
| 3920995022 |
Ion-exchange membranes of fluorcoated plastic material, for use in chlor-alkali electrolytic cells |
| 3920995023 |
Biaxially orientated polyvinyl alcohol film containing not less than 97|% by weight of polyvinyl alcohol, uncoated, with a thickness of not more than 1|mm |
| 3920995025 |
Microporous polytetrafluoroethylene film of a width of 30|cm or more and weighing not more than 22,4|g/m$2 |
| 3920995026 |
Poly(1-chlorotrifluoroethylene) film |
| 3920995027 |
Film of a mixture of polyvinylidene fluoride and of an acrylic polymer having a thickness not less than 40|micrometres and not more than 60|micrometres |
| 3920995028 |
Film and sheet of a copolymer of ethylene with chlorotrifluoroethylene, of a thickness of 12 micrometres or more but not exceeding 400 micrometres |
| 3920995032 |
Sheet of a thickness of|1|mm or more but not exceeding|3|mm, consisting of a copolymer of ethylene with chlorotrifluoroethylene, whether or not backed with a woven glass-fibre fabric |
| 3920995033 |
Film of a thickness of not more than|1|mm of a copolymerization product of vinyl alcohol with ethylene containing no other polymerization products or copymerization products, with an extension at break (longtitudinal or transversal) of not less than|65|% |
| 3920995035 |
Polyvinyl alcohol film coated on both sides having a total thickness of less than|1|mm and with an extension at break (longitudinal or transversal) of not less than|65|% |
| 3920995036 |
Film entirely of polyvinyl alcohol, of a thickness not exceeding 1|mm and of a width of 2,20|m or more, with an extension at break, in the transverse direction, of 350|% or more |
| 3920995037 |
Microporous polytetrafluoroethylene film, coated on one side with a polymer permeable to water vapour, not less than|30|cm in width and weighing not more than|50|g/m2 |
| 3920995037 |
Biaxially-oriented film of polyvinyl alcohol, coated on both sides, of a total thickness of less than 1|mm |
| 3920995038 |
Iridescent film of polyester, polyethylene and an ethylene-vinyl acetate copolymer |
| 3920995039 |
Polytetrafluoroethylene film, non-microporous, in the form of rolls, of a thickness of 0,019|mm or more but not exceeding 0,14|mm, impermeable to water vapour |
| 3920995099 |
Other |
| 3920995100 |
Of addition polymerisation products |
| 3920995100 |
Poly(vinyl fluoride) sheet |
| 3920995200 |
Of addition polymerisation products |
| 3920995200 |
Poly(vinyl fluoride) sheet; biaxially oriented poly(vinyl alcohol) film, containing by weight 97 % or more of poly(vinyl alcohol), uncoated, of a thickness not exceeding 1 mm |
| 3920995300 |
Ion-exchange membranes of fluorinated plastic material, for use in chlor-alkali electrolytic cells |
| 3920995500 |
Biaxially oriented poly(vinyl alcohol) film, containing by weight 97|% or more of poly(vinyl alcohol), uncoated, of a thickness not exceeding 1|mm |
| 3920995900 |
Other |
| 3920995910 |
For use in certain types of aircraft |
| 3920995920 |
Other |
| 3920995925 |
Other |
| 3920995925 |
Poly(1-chlorotrifluoroethylene) film |
| 3920995930 |
Film and sheet of a copolymer of ethylene with chlorotrifluoroethylene, of a thickness of 12|?m or more but not exceeding 400|?m |
| 3920995935 |
Film entirely of poly(vinyl alcohol), of a thickness not exceeding 1|mm and of a width of 2,20|m or more, with an extension at break, in the transverse direction, of 350|% or more |
| 3920995940 |
Biaxially-oriented film of poly(vinyl alcohol), coated on both sides, of a total thickness of less than 1|mm |
| 3920995945 |
Iridescent film of polyester, polyethylene and an ethylene-vinyl acetate copolymer |
| 3920995950 |
Polytetrafluoroethylene film, non-microporous, in the form of rolls, of a thickness of 0,019|mm or more but not exceeding 0,14|mm, impermeable to water vapour |
| 3920995955 |
Ion-exchange membranes of fluorinated plastic material |
| 3920995960 |
Film of a vinyl alcohol copolymer, soluble in cold water, of a thickness of 34|?m or more but not exceeding 90|?m, a tensile strength at break of 20|MPa or more but not exceeding 45|MPa and an elongation at break of 250|% or more but not exceeding 900|% |
| 3920995990 |
Other |
| 3920999000 |
Other |
| 3920999010 |
Biodegradeable sheet of a thickness not exceeding 1|mm containing by weight: - 90|% (±|5|%) starch, 10|% (±|5|%)of a synthetic polymer, 0.5|% (±|0.5|%) of stearic acid |
| 3920999020 |
Anisotropic conductive film, in rolls, of a width of 1,5mm or more but not more than 3,15mm and a maximum length of 300m, used for joining electronic components in the production of LCD or plasma displays |
| 3920999090 |
Other |
UK Hs Code - 3921 : Other plates, sheets, film, foil and strip, of plastics
|
| 3921110000 |
Cellular |
| 3921110000 |
Of polymers of styrene |
| 3921110010 |
Acrylonitrile butadiene styrene, for use in certain types of aircraft |
| 3921110020 |
Copolymers, solely of allyl alcohol with styrene, which have an acetyl value of not less than 175, in the form of film |
| 3921110090 |
Other |
| 3921120000 |
Of polymers of vinyl chloride |
| 3921120020 |
For use in certain types of aircraft |
| 3921120090 |
Other |
| 3921130000 |
Of polyurethanes |
| 3921131000 |
Flexible |
| 3921131010 |
Sheet of polyurethane foam, of a thickness of 3|mm (±|15|%) and of a specific gravity of 0,09435 or more but not exceeding 0,10092 |
| 3921131090 |
Other |
| 3921139000 |
Other |
| 3921140000 |
Of regenerated cellulose |
| 3921140010 |
Cellular film of regenerated cellulose, of a thickness not exceeding 350|?m |
| 3921140090 |
Other |
| 3921190000 |
Of other plastics |
| 3921190010 |
For use in certain types of aircraft |
| 3921190091 |
Other |
| 3921190091 |
Microporous polypropylene film of a thickness not exceeding 100|?m |
| 3921190092 |
Microporous film consisting of mixtures of cellulose acetate and cellulose nitrate, of a thickness not exceeding 200|?m |
| 3921190093 |
Strip of microporous polytetrafluoroethylene on a support of a non-woven, for use in the manufacture of filters for kidney dialysis equipment |
| 3921190093 |
Strip of microporous polytetrafluoroethylene on a support of a non-woven, for use in the manufacture of filters for kidney dialysis equipment |
| 3921190095 |
Film of polyethersulfone, of a thickness not exceeding 200|?m |
| 3921190096 |
Cellular film, consisting of a layer of polyethylene of a thickness of 90|?m or more but not exceeding 140|?m and a layer of regenerated cellulose of a thickness of 10|?m or more but not exceeding 40|?m |
| 3921190099 |
Other |
| 3921191000 |
Of epoxide resins |
| 3921199000 |
Other |
| 3921199010 |
For use in certain types of aircraft |
| 3921199090 |
Other |
| 3921199091 |
Other |
| 3921199091 |
Microporous polypropylene film of a thickness not exceeding 100 micrometres |
| 3921199092 |
Microporous film consisting of mixtures of cellulose acetate and cellulose nitrate, of a thickness not exceeding 200 micrometres |
| 3921199099 |
Other |
| 3921900000 |
Other |
| 3921901000 |
Of condensation or rearrangement polymerisation products, whether or not chemically modified |
| 3921901000 |
Of polyesters |
| 3921901005 |
Corrugated sheet and plates |
| 3921901010 |
Composite plate of poly(ethylene terephthalate) or of poly(butylene terephthalate), reinforced with glass fibres |
| 3921901020 |
Poly(ethylene terephthalate) film, laminated on one side or on both sides with a layer of unidirectional nonwoven poly(ethylene terephthalate) and impregnated with polyurethane or epoxide resin |
| 3921901090 |
Other |
| 3921901100 |
Of condensation or rearrangement polymerisation products, whether or not chemically modified |
| 3921901100 |
Of polyesters |
| 3921901100 |
Corrugated sheet and plates |
| 3921901900 |
Other |
| 3921901910 |
Transparent film consisting of polyester coated with a layer of indium and silver |
| 3921901915 |
Iridescent film of polyester and polymethyl methacrylate |
| 3921901920 |
Polyester film of a thickness not exceeding|70|micrometres, coated on one side with a substance which becomes coloured in the presence of salicyclic acid at a temperature not exceeding|100$oC |
| 3921901925 |
Iridescent film of polyester with polyethylene |
| 3921901930 |
Polyester film of a thickness not exceeding|10|micrometres, coated on one side with salilcyclic acid |
| 3921901935 |
Composite plate of polycarbonate and poly(butylene terephthalate), reinforced with glass fibres |
| 3921901945 |
Composite plate of poly(ethylene terephthalate) or of poly(butylene terephthalate), reinforced with glass fibres |
| 3921901950 |
Reflecting polyester sheeting in which microspheres are embedded |
| 3921901955 |
Poly(ethylene terephthalate) film, laminated on one side or on both sides with a layer of unidirectional nonwoven poly(ethylene terephthalate) and impregnated with polyurethane or epoxide resin |
| 3921901960 |
Polyester film, dyed in the mass, of a thickness of not more than 25|micrometres and metallized on one side |
| 3921901960 |
Polyethylene terephthalate film, not coated with an adhesive, of a thickness not exceeding 25 micrometres, either: only dyed in the mass, or dyed in the mass and metallized on one side |
| 3921901961 |
Polyester film, dyed in the mass, of a thickness of not more than 25|micrometres and metallized on one side |
| 3921901961 |
Of polyethylene terephthalate |
| 3921901969 |
Other |
| 3921901990 |
Other |
| 3921902000 |
Of epoxide resins |
| 3921903000 |
Of phenolic resins |
| 3921904100 |
Of amino-resins |
| 3921904100 |
Laminated |
| 3921904100 |
High-pressure laminates with a decorative surface on one or both sides |
| 3921904300 |
Other |
| 3921904900 |
Other |
| 3921905000 |
Other |
| 3921905020 |
Polyimide sheet and strip |
| 3921905020 |
Polyimide sheet and strip, uncoated or coated or covered solely with plastic |
| 3921905021 |
Polyimide sheet and strip |
| 3921905021 |
Uncoated, or coated or covered solely with plastic |
| 3921905029 |
Other |
| 3921905030 |
Reflecting polyurethane sheeting |
| 3921905090 |
Other |
| 3921905500 |
Other |
| 3921905590 |
Other |
| 3921906000 |
Of addition polymerisation products |
| 3921906010 |
For use in certain types of aircraft |
| 3921906021 |
Other: |
| 3921906021 |
Laminated reflecting film of acrylic polymer, one layer of which is embossed with a prismatic pattern which reflects light back to the source of incident light (retro-reflecting), coated on one side with an adhesive |
| 3921906022 |
Other: |
| 3921906022 |
Sheet of a thickness of|1|mm or more but not exceeding|3|mm, consisting of a copolymer of ethylene with chlorotrifluorothylene, whether or not backed with a woven glass-fibre fabric |
| 3921906024 |
Reflecting polyacrylic sheeting in which microspheres are embedded |
| 3921906025 |
Other |
| 3921906025 |
Ion-exchange membranes of fluorcoated plastic material, for use in chlor-alkali electrolytic cells |
| 3921906028 |
Reflecting sheeting of an acrylic polymer modified by melamine-formaldehyde, containing glass microspheres |
| 3921906028 |
Translucent laminated sheet consisting of a polyester film coated on one surface with metal and metal oxides, and covered on both sides with a film of polyvinyl butyral |
| 3921906029 |
Iridescent film of polyester, polyethylene and an ethylene-vinyl acetate copolymar |
| 3921906090 |
Other |
| 3921906091 |
Other |
| 3921906092 |
Reinforced polypropylene sheet, of a thickness of 0,91|mm or more but not exceeding 1,12|mm, having a breaking strength of 890|N or more but not exceeding 1|500|N (as determined by the ASTM D 751 method), in rolls of a width of 3,81|m |
| 3921906094 |
Composite sheet containing an acrylic coating and laminated to a high-density polyethylene layer, of a total thickness of 0.8|mm or more but not exceeding 1.2|mm |
| 3921906099 |
Other |
| 3921906099 |
Other |
| 3921909000 |
Other |
UK Hs Code - 3922 : Baths, shower-baths, sinks, washbasins, bidets, lavatory pans, seats and covers, flushing cisterns and similar sanitary ware, of plastics
|
| 3922100000 |
Baths, shower-baths, sinks and washbasins |
| 3922200000 |
Lavatory seats and covers |
| 3922900000 |
Other |
UK Hs Code - 3923 : Articles for the conveyance or packing of goods, of plastics; stoppers, lids, caps and other closures, of plastics
|
| 3923100000 |
Boxes, cases, crates and similar articles |
| 3923100010 |
Compact-disc boxes, including those for DVDs and similar products, of plastics |
| 3923100010 |
Boxes of a kind used for the transport and stocking of rigid magnetic discs, fitted with slots to embody 25 rigid magnetic discs of a diameter of less than 100|mm, of exterior dimensions not exceeding 110|!x!|110|!x!|200|mm |
| 3923100090 |
Other |
| 3923100090 |
Other |
| 3923210000 |
Sacks and bags (including cones) |
| 3923210000 |
Of polymers of ethylene |
| 3923210010 |
Woven sacks and bags of a kind used for the packaging of goods not knitted or crocheted, obtained from a polyethylene or polypropylene strip or the like of woven fabrics, weighing 120 g/m$2 or less |
| 3923210020 |
Of sheeting of a thickness not exceeding 100|micrometres|(?m) |
| 3923210090 |
Other |
| 3923210099 |
Other |
| 3923290000 |
Of other plastics |
| 3923291000 |
Of poly(vinyl chloride) |
| 3923291010 |
Woven sacks and bags of a kind used for the packaging of goods not knitted or crocheted, obtained from a polyethylene or polypropylene strip or the like of woven fabrics, weighing 120 g/m$2 or less |
| 3923291020 |
Containing at least 20|% by weight of polyethylene and of sheeting of a thickness not exceeding 100|micrometers|(?m) |
| 3923291090 |
Other |
| 3923291099 |
Other |
| 3923299000 |
Other |
| 3923299010 |
Woven sacks and bags of a kind used for the packaging of goods not knitted or crocheted, obtained from a polyethylene or polypropylene strip or the like of woven fabrics, weighing 120 g/m$2 or less |
| 3923299020 |
Containing at least 20|% by weight of polyethylene and of sheeting of a thickness not exceeding 100|micrometers|(?m) |
| 3923299090 |
Other |
| 3923299099 |
Other |
| 3923300000 |
Carboys, bottles, flasks and similar articles |
| 3923301000 |
Of a capacity not exceeding two litres |
| 3923309000 |
Of a capacity exceeding two litres |
| 3923309090 |
Other |
| 3923400000 |
Spools, cops, bobbins and similar supports |
| 3923401000 |
Spools, reels and similar supports for photographic and cinematographic film or for tapes, films and the like of heading 8523 |
| 3923409000 |
Other |
| 3923500000 |
Stoppers, lids, caps and other closures |
| 3923501000 |
Caps and capsules for bottles |
| 3923509000 |
Other |
| 3923900000 |
Other |
| 3923901000 |
Netting extruded in tubular form |
| 3923909000 |
Other |
| 3923909010 |
Trays, bases and lids of compact-disc boxes, of plastics, whether assembled or not |
| 3923909090 |
Other |
UK Hs Code - 3924 : Tableware, kitchenware, other household articles and hygienic or toilet articles, of plastics
|
| 3924100000 |
Tableware and kitchenware |
| 3924900000 |
Other |
| 3924900010 |
Ironing boards, including sleeve boards, whether or not free standing, and legs and tops thereof |
| 3924900090 |
Other |
| 3924901100 |
Of regenerated cellulose |
| 3924901100 |
Sponges |
| 3924901900 |
Other |
| 3924909000 |
Other |
| 3924909010 |
Ironing boards, including sleeve boards, whether or not free standing, and legs and tops thereof |
| 3924909090 |
Other |
UK Hs Code - 3925 : Builders' ware of plastics, not elsewhere specified or included
|
| 3925100000 |
Reservoirs, tanks, vats and similar containers, of a capacity exceeding 300 litres |
| 3925200000 |
Doors, windows and their frames and thresholds for doors |
| 3925300000 |
Shutters, blinds (including venetian blinds) and similar articles and parts thereof |
| 3925900000 |
Other |
| 3925901000 |
Fittings and mountings intended for permanent installation in or on doors, windows, staircases, walls or other parts of buildings |
| 3925902000 |
Trunking, ducting and cable trays for electrical circuits |
| 3925908000 |
Other |
| 3925909000 |
Other |
UK Hs Code - 3926 : Other articles of plastics and articles of other materials of headings 3901 to 3914
|
| 3926100000 |
Office or school supplies |
| 3926200000 |
Articles of apparel and clothing accessories (including gloves, mittens and mitts) |
| 3926300000 |
Fittings for furniture, coachwork or the like |
| 3926400000 |
Statuettes and other ornamental articles |
| 3926900000 |
Other |
| 3926901000 |
For technical uses, for use in civil aircraft |
| 3926905000 |
Other |
| 3926905000 |
Perforated buckets and similar articles used to filter water at the entrance to drains |
| 3926905000 |
Perforated buckets and similar articles used to filter water at the entrance to drains |
| 3926909100 |
Other |
| 3926909100 |
Other |
| 3926909100 |
Made from sheet |
| 3926909100 |
Made from sheet |
| 3926909110 |
For technical uses, for use in civil aircraft |
| 3926909110 |
Two polyethylene sheets containing multiple slits laid crosswise upon each other and bonded together |
| 3926909120 |
Other |
| 3926909190 |
Other |
| 3926909200 |
Other |
| 3926909200 |
Made from sheet |
| 3926909210 |
For technical uses, for use in civil aircraft |
| 3926909220 |
Other |
| 3926909290 |
Other |
| 3926909700 |
Other |
| 3926909705 |
For technical uses, for use in civil aircraft |
| 3926909710 |
Microspheres of polymer of divinylbenzene, of a diameter of 4,5|?m or more but not exceeding 80|?m |
| 3926909715 |
Glass fibre reinforced plastic traverse leaf spring for use in the manufacture of motor vehicle suspension systems |
| 3926909720 |
Tape pad, for use in the manufacture of goods of heading No|8523 |
| 3926909725 |
Unexpansible microspheres of a copolymer of acrylonitrile, methacrylonitrile and isobornyl methacrylate, of a diameter of 3|µm or more but not exceeding 4,6|µm |
| 3926909730 |
Guide pin and pole, for use in the manufacture of goods of subheading 8523|29|15 |
| 3926909735 |
Microspheres of polyalkylsiloxane, on which are covalently bonded organic compounds, of a diameter of 1|?m or more but not exceeding 30|?m |
| 3926909740 |
Hollow microspheres of a copolymer of isooctylacrylate and acrylic acid, having a diameter of 10|µm or more but not exceeding 1000|µm, dispersed in water |
| 3926909745 |
Assembly of heat-shrinkable tubing of polyethylene with poly(vinyl acetate), arranged in parallel at equally spaced intervals and attached at one or both ends by perforated plastic strips, in rolls |
| 3926909755 |
Flat product of polyethylene, perforated in opposing directions, of a thickness of 600|?m or more but not exceeding 1|200|?m and of a weight of 21|g/m$2 or more but not exceeding 42|g/m$2 |
| 3926909760 |
Sheath contraceptives of polyurethane |
| 3926909770 |
Epoxide resin, containing by weight 70|% or more of silicon dioxide, for the encapsulation of goods of heading No|8533, 8535, 8536, 8541, 8542 or 8548 |
| 3926909775 |
Microspheres of a copolymer of divinylbenzene and styrene, of an average diameter of 220|µm or more but not exceeding 575|µm |
| 3926909780 |
Poly(vinyl chloride), dyed in the mass, in the form of flakes, grains, pebbles or rectangular chips, for use as decorative elements in floor and wall coverings |
| 3926909790 |
Other |
| 3926909800 |
Other |
| 3926909805 |
For technical uses, for use in civil aircraft |
| 3926909810 |
Microspheres of polymer of divinylbenzene, of a diameter of 4,5|?m or more but not exceeding 80|?m |
| 3926909815 |
Glass fibre reinforced plastic traverse leaf spring for use in the manufacture of motor vehicle suspension systems |
| 3926909820 |
Tape pad, for use in the manufacture of goods of heading No|8523 |
| 3926909825 |
Unexpansible microspheres of a copolymer of acrylonitrile, methacrylonitrile and isobornyl methacrylate, of a diameter of 3|µm or more but not exceeding 4,6|µm |
| 3926909830 |
Guide pin and pole, for use in the manufacture of goods of subheadings 8523|11|00, 8523|12|00 and 8523|13|00 |
| 3926909835 |
Microspheres of polyalkylsiloxane, on which are covalently bonded organic compounds, of a diameter of 1|?m or more but not exceeding 30|?m |
| 3926909840 |
Hollow microspheres of a copolymer of isooctylacrylate and acrylic acid, having a diameter of 10|µm or more but not exceeding 1000|µm, dispersed in water |
| 3926909845 |
Assembly of heat-shrinkable tubing of polyethylene with poly(vinyl acetate), arranged in parallel at equally spaced intervals and attached at one or both ends by perforated plastic strips, in rolls |
| 3926909855 |
Flat product of polyethylene, perforated in opposing directions, of a thickness of 600|?m or more but not exceeding 1|200|?m and of a weight of 21|g/m$2 or more but not exceeding 42|g/m$2 |
| 3926909860 |
Sheath contraceptives of polyurethane |
| 3926909870 |
Epoxide resin, containing by weight 70|% or more of silicon dioxide, for the encapsulation of goods of heading No|8533, 8535, 8536, 8541, 8542 or 8548 |
| 3926909875 |
Microspheres of a copolymer of divinylbenzene and styrene, of an average diameter of 220|µm or more but not exceeding 575|µm |
| 3926909880 |
Poly(vinyl chloride), dyed in the mass, in the form of flakes, grains, pebbles or rectangular chips, for use as decorative elements in floor and wall coverings |
| 3926909890 |
Other |
| 3926909900 |
Other |
| 3926909910 |
Microspheres of polymer of divinylbenzene, of a diameter of 4,5|?m or more but not exceeding 80|?m |
| 3926909915 |
Glass fibre reinforced plastic traverse leaf spring for use in the manufacture of motor vehicle suspension systems |
| 3926909920 |
Tape pad, for use in the manufacture of goods of heading No|8523 |
| 3926909925 |
Unexpansible microspheres of a copolymer of acrylonitrile, methacrylonitrile and isobornyl methacrylate, of a diameter of 3|µm or more but not exceeding 4,6|µm |
| 3926909930 |
Guide pin and pole, for use in the manufacture of goods of subheadings 8523|11|00, 8523|12|00 and 8523|13|00 |
| 3926909935 |
Microspheres of polyalkylsiloxane, on which are covalently bonded organic compounds, of a diameter of 1|?m or more but not exceeding 30|?m |
| 3926909940 |
Shells of a kind used for 3,5" microdisks |
| 3926909945 |
Assembly of heat-shrinkable tubing of polyethylene with poly(vinyl acetate), arranged in parallel at equally spaced intervals and attached at one or both ends by perforated plastic strips, in rolls |
| 3926909950 |
Shutters of a kind used for 3,5" microdisks |
| 3926909955 |
Flat product of polyethylene, perforated in opposing directions, of a thickness of 600|?m or more but not exceeding 1|200|?m and of a weight of 21|g/m$2 or more but not exceeding 42|g/m$2 |
| 3926909960 |
Sheath contraceptives of polyurethane |
| 3926909970 |
Epoxide resin, containing by weight 70|% or more of silicon dioxide, for the encapsulation of goods of heading No|8533, 8535, 8536, 8541, 8542 or 8548 |
| 3926909975 |
Microspheres of a copolymer of divinylbenzene and styrene, of an average diameter of 220|µm or more but not exceeding 575|µm |
| 3926909980 |
Poly(vinyl chloride), dyed in the mass, in the form of flakes, grains, pebbles or rectangular chips, for use as decorative elements in floor and wall coverings |
| 3926909985 |
Unexpansible microspheres of a copolymer of acrylonitrile, methacrylonitrile and isobornyl methacrylate, of a diameter of 3|?m or more but not exceeding 3,3|?m |
| 3926909990 |
Other |